REPAIR/MAINTENANCE OF INTERNAL ELECTRIFICATION INCLUDING REPLACEMENT OF FITTING AND FIXTURE OF MIL STN KANASAR

Amount

Taking down carefully existing unserviceable/perished surface conduit/concealed conduit/batten/casing caping aluminium/copper point wiring any type for light, fan, bell, socket, power point etc complete including all fixtures and fittings such as batten/conduit/casing caping, switches, sockets, ceiling rose, pendent holder, lamp holders, bracket holders, light fittings, top sheet covers, fan regulators, wooden boxes, MS sunken boxes, etc and making good the disturbed surfaces of wall, floors, ceiling, etc to match with the adjoining surfaces, complete all as specified and as directed.

M&L for point wiring concealed type with PVC insulated (unsheathed ) cable 1.5 Sq mm (Nominal area) multi stranded FRLS copper conductor 1100 V grade & continuous earth wire PVC insulated 1.5 Sq mm copper solid conductor connecting to common earth in and existing PVC conduit, and sunken boxes but fixing new 3mm thick plastic laminated sheet top cover,sheet screws and after removing old unserviceable plastic laminated sheet (including cutting chases & making good the disturbed surface) complete all as specified and directed by Engineer-in-Charge for the following:- Note : The cost of bakellite sheet is included in the quoted rate)

Ditto all as per item No 2.00 hereinbefore, but for one light /fan/ buzzer point controlled by one 5 Amp switch one way complete all as specified and directed by Engineer-in-Charge.

Ditto all as per item No 2.00 hereinbefore, but for One bell point controlled by one, bell push complete all as specified and directed.

All as per serial item No. 2.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board with other switches complete all as specified and directed by Engineer-in-Charge.

All as per serial item No. 2.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board complete all as specified and directed by Engineer-in-Charge.

All as per serial item No. 2.00 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour complete all as specified and directed by Engineer-in-Charge.

Material and labour for point wiring complete with 1.5 sqmm(nominal core) PVC insulated unsheathed 1100 volts grade cable multi stranded copper conductor single core in PVC casing caping of suitable size complete with sunk pressed steel terminel box for fitting /mounting switches / sockets regulators etc with bakelite sheet 3mm thick cover and with 1.5 sqmm PVC insulated copper conductor earth wire and connecting to earth dolly for one light / fan point controlled by one switch complete all as specified and directed.

Ditto all as per item No 8.00 hereinbefore, but for one light /fan/ buzzer point controlled by one 5 Amp switch one way complete all as specified and directed by Engineer-in-Charge.

Ditto all as per item No 8.00 hereinbefore, but for One bell point controlled by one, bell push complete all as specified and directed.

All as per serial item No. 8.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board with other switches complete all as specified and directed by Engineer-in-Charge.

All as per serial item No. 8.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.

All as per serial item No. 8.00 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour.

S&F switch piano, flush type, single pole, one way, 5/6 Amp, 230 Volts, ISI marked, complete all as specified and as directed.

S&F bell push, flush type, 5 Amp, 230 Volts, ISI marked, complete all as specified and as directed.

Supply and fixing Bell ‘Ding Dong’ / ‘Multi Music’ Type, AC, 230 Volts, ISI marked, complete all as specified and as directed.

S&F socket outlet, 5 pin, 5/6 Amp, flush type, 230 Volts, ISI marked, complete all as specified and as directed.

S&F switch socket combination, 5 in 1, 5/6 Amps, flush type, 230 Volts, ISI marked, complete with junction box all as specified and as directed.

S&F switch socket combination, 5 in 1, 15/ 16 Amps, flush type, 230 Volts, ISI marked, complete with junction box complete all as specified and directed by Engineer-in-Charge.

S&F in repair electronic fan regulator, flush type, stepped type with 4 step control, 230 Volts, 150 Watt, including making hole in sheet top cover and connecting up, ISI marked, complete all as specified and as directed.

S&F in repair switch piano, flush type, single pole, one way, 5/6 Amp, 230 Volts, ISI marked, complete all as specified and as directed.

S&F in repair switch piano, flush type, single pole, one way, 15/16 Amp, 230 Volts, ISI marked, complete all as specified and as directed.

S&F in repair bell push, flush type, 5 Amp, 230 Volts, ISI marked, complete all as specified and as directed.

S&F in repair Bell ‘Ding Dong’ / ‘Multi Music’ Type, AC, 230 Volts, ISI marked, complete all as specified and as directed.

S&F in repair socket outlet, 5 pin, 5/6 Amp, flush type, 230 Volts, ISI marked, complete all as specified and as directed.

S&F in repair socket outlet universal type, 6 pin, 15/16 Amp, flush type, 230 Volts, ISI marked, complete all as specified and as directed.

Supply & fix in replacement switch socket combination box multi purpose with complete PVC board 5 pin 5 Amps flush type including 1.5 sqmm x 3 core multistranded copper wire of minimum 2 meter complete all as specified.

Supply & fix in replacement switch socket combination box multi purpose with complete PVC board 3 pin 15 Amps and 3 pin 5 Amps flush type multipurpose 2 in one including 2.5 sqmm x 3 core multistranded copper wire of minimum 2 meter as desired complete all as specified.

Supply and fix in replacement Lamp holder insulated body with back plate for batten fitting complete all as specified and directed.

Supply and fix in replacement Ceiling rose 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed. Make :- Anchor/Legrand/Crabtree

Supply and fix in replacement ceiling fan cover plate/PVC/polycarbonate, isolated body complete all as specified and directed. Make:- Anchor/Legrand/Crabtree

Supply and fix in replacement switch Modular type white colour flush 5/6 Amps single pole one way complete all as specified and directed.

Supply and fix in replacement Modular type bell push white colour 5/6 Amps piano type single pole 230 volt one way complete all as specified and directed.

Supply & fix in replacement Modular type socket multi purpose white colour 5 pin 5 Amps flush type complete all as specified.

Supply & fix in replacement Modular type socket muli purpose white colour 3 pin 15 Amps and 3 pin 5 Amps flush type multipurpose 2in one complete all as specified.

Supply & fix in replacement Modular type fan regulator single module / double module type 0-4/5 step type complete all as specified.

Supply & fix in replacemet sheet metal enclosure double door powder coated for MCB DB SPN 4 way with Din rail and busbar complete all as specified.

Supply & fix in replacemet sheet metal enclosure double door powder coated for MCB DB SPN 8 way with Din rail and busbar complete all as specified.

Supply & fix in replacemet sheet metal enclosure double door powder coated for MCB DB SPN 12 way with Din rail and busbar complete all as specified.

Supply & fix in replacemet MCB SP 240V ,6 to 32 Amps, 10 KA, "C" curve rating ISI marked and connecting complete all as specified.

Supply & fix in replacemet MCB SPN 240V, 32 Amps, 10 KA, "C" curve rating ISI marked and connecting complete all as specified.

Supply & fix in replacemet MCB TPN 415 V, 63 Amps ,10 KA, "C" curve rating ISI marked and connecting complete all as specified.

Supply & fix in replacement self ballasted LED batten Extruded PVC body with PC diffuser, fin and groove shap base for batter heat dissipation 4 feet 20 watt to be install at any height on wall / ceiling having power factor more than 0.90 , rated voltage AC 220-240 Volt, 50 Hz, cool white 6500K colour temperatur, CRI > 80 all as specified and directed.

S&F in replacement self ballasted LED batten, extruded PVC body with PC diffuser fin and groove shape base for batter heat dissipation 2 feet 10 watt to be install at any height on wall/ceiling having power factor more than 0.90, rated voltage AC 220-240 Volt, 50 Hz , cool white 6500K color temperature, CRI>80 etc complete all as specified and directed.

Supply & fix in replacement square surface mounted LED 06 Watt surface mounted square fixture with premium diffuser and separate electronic driver.flat panel, alumminum housing including surface panel ring complete all as specified and directed. Make:- Havells Cat Part No- LHEAAKP7IL1W006 or equivalent of Bajaj, Crompton, Philips,Syska

Supply & fix in replacement round surface mounted LED 12 Watt slim surface mounted LED panel with premium diffuser, including surface panel ring complete all as specified and directed. Make:- Syska Cat Part No- SSK-SDC-12W-N or equivalent of Bajaj, Crompton, Philips, Havells

Supply and fix in replacement fully diffused recessed mounted 2' X 2 ' LED luminaire, 36 Watt Environmental friendly, new generation,aesthetically designed, white powder coated CRCA housing ultra modern recess mounting luminaire with high translucent frosted diffuser, having efficency upto 100 Lumens/watt, rated voltage 240 Volt, frequency 50 Hz, PF > 0.95, THD < 10% , CRI > 80 suitable for indoor spaces complete all as specified and directed by Engineer-in-Charge. Make:- Havells Cat Part No- LHEBAEP7IW1W036 or equivalent of Bajaj, Havells, Philips and Syska

Supply and Fixing in replacement security lights LED 30 W Energy saving & Environmental friendly long life versatile pressure die cast aluminium IP 65, CRI>80, PF >0.90 LED Wall mounted Light Luminaries are made of die casted aluminium body and toughened glass cover for uniform light spread including bracket made out of suitable size of GI medium grade tubing and fixed with clamps nuts and bolts, washer complete all as specified . Make- Havells Cat No LHEXAYP7PN6K030 or equivalant in Bajaj ,Crompton, Phillips and Syska

Material and labour for dismantling old earthing and supply, installation and testing earthing complete with galvanisedsteel earth plate electrode of size 60 cm×60 cm.× 6mm thick, buried directly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to and including galvanised iron earth lead wire 4.0 mm dia by means of GI bolts/nuts/washers, protected by 15 mm bore GI medium grade pipe.Earth plate shall be surrounded by alternate layer of charcoal or coke and common salt 15 cm thick all around bottom and top. 20 mm bore GI medium grade pipe for watering and including funnel, wire mesh, RCC cover & frame, PCC (1:3:6) type C-2 (using 20 mm graded crushed stone aggregate) as in earthing pit including necessary excavation and earth work , all as specified and shown in electrical plate No 3 of MES Schd Part-I complete all as specified and directed by Engineer-in-Charge. Notes :- (i) PCC Chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting maner. (ii) The unit rate includes earthing lead & protection pipe upto 7.5 metre from top of earth plate. (iii) On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost.

S & F in replacement PVC non modular gang box 1 way suitable for 5/6 amp switch complete all as specified and directed by Engineer-in-Charge.

S & F in replacement PVC non modular gang box 2 way suitable for 5/6 amp switch complete all as specified and directed by Engineer-in-Charge.

S & F in replacement PVC non modular gang box 2 way suitable for 5/6 amp switch and socket complete all as specified and directed by Engineer-in-Charge.

S & F in replacement PVC non modular gang box 4 way suitable for 5/6 amp switch and socket complete all as specified and directed by Engineer-in-Charge.

S & F in replacement PVC non modular MCB box suitable for MCB 6 to 32 Amp complete all as specified and directed by Engineer-in-Charge.

S & F in replacement PVC rectangular casing caping with accessories of suitable size complete all as specified and directed.

M/L for GI Tubes, of size 40mm dia light grade ,galvanised , with fitting fixed to wall/pole/ceiling or laid in floors complete including taking out old one all as specified and as directed.

M & L for Supplying, laying, connecting and testing in trenches, under floors/ roads or on walls Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armored, electric power cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade, of size 10 sqmm, 2 core including taking out old one all as specified and directed by Engineer-in-Charge.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation for laying cable etc and getting out in soft/loose soil complete all as specified and directed.

Returning,filling in and including spreading levelling watering and well ramming in layers n.exc 25cm complete all as specified and directed.

Removing of excavated material (soil) to a distance n.exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M&L bricks for protection cover to under ground cable (with old size sub class 'B' bricks) laid flat abutting each other with width of protection being equal to length of brick. The gap between should not exceed 10 mm as directed by Engineer-in-Charge.

M&L for dry sand (Local Tibba sand) and punning for cushioning and cover for protection of under ground electric cable complete all as specified and as directed. Notes :-(i) Approved local Tibba dry sand free from vegetations, grass and other deleterious substances shall be used. (ii) For the purpose of payment, only punned thickness shall be measured.

Supply and laying, testing and commissioning in replacement LT copper cable 1.1 KV Grade 2.5 Sqmm 3 core steel wire armoured PVC insulated copper cable laid in duct / tray / wall / ceiling with the help of steel clamps including cable glands with rubber cover etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacemnt LED Bulb 230V AC 10 watt cool day light 6500K heavy duty complere in wall lights as per existing all as specified and directed by Engineer-in -charge.

S&F in replacement metal clad socket with MCB single pole 20 Amp including sheet metal enclosure complete concelled in wall including complete electrical connection by proper size of copper lugs complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement decorative wall light fixture for living room made up of suitable unbreakable plastic material as directed including 9 watt Led lamp B22 Base light fitting complete all as specified and directed by Engineer -in-Charge. Make :Havells Cat Part No LHFOFUE1TZ1W012 or equivalent in Philips, Crompton, Surya, Bajaj ,Wipro.

Supply and fix in replacement LED Energy saving 100 watt fitting IP 66 flood light luminaire of pressure die cast aluminium housing with toughned glass visor, having efficacy 100 lumen/watt, 6500 K, PF >0.90, 10 KV SPD with fixing arrangement made out of MS flat 25x4 mm with suitable size nut,bolt and washer in existing pole/biulding including welding in pole /grouting work in wall complete all as specified and directed by Engr-in-Charge. Make:-Crompton Cat No CFS-504-100-57-NL-SL-GL-NSG or equivalant in Phillips ,HAVELLS, SYSKA, and Wipro.

BIDAWAT ENTERPRISES