Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.2 LAccepted-Finance 03 SHRI RAM ARCADE SHRIRAM PARISAR KHAJURI KALAN BHOPAL MADHYA PRADESH 462022 | BHOPAL | MADHYA PRADESH | 462022 | L1 | Accepted-Finance ok | |
| 2 | L2₹38.5 L+₹33,059.44 (0.87%)Accepted-Finance | L2 | Accepted-Finance ok | |
| 3 | L3₹45.1 L+₹6.9 L (18.0%)Accepted-Finance | L3 | Accepted-Finance ok |
Tender Value
₹49.3 L
EMD Value
₹98,685
Closing Date
10 Jun 2026, 3:00 pmClosed
Executive Engineer (E)
Executive Engineer (E) North West, Elect. Divn., PWD ISBT, Kashmere Gate, Delhi-110006
Maintenance and Payment of electrical consumption charges of street lighting on PWD North West Roads under NWED.(SH Providing of Star Delta Starter and Miscellaneous works at various Storm Water Pump House under NWED, Delhi)
2026_PWD_292434_1
15/EE(E)/NWED/PWD/2026-27
Open Tender
Electrical Works
Works
120 days
North West Road
Please refer Tender documents.
18 documents required · 18 mandatory
₹0
₹98,685
Yes
18 Jun 2026
1 Jun 2026
10 Jun 2026
1 Jun 2026
10 Jun 2026
1 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | SITC of following size of fully automatic star delta stater suitable for following Monoblock / Sewage submersible pump set, starter consisting of main ON/OFF switch, Ammeter, Voltmeter, Auto Manual switch etc suitable for operation on LT AC supply, 50 Hz frequency i/c connection with suitable size cable, testing and commissioning etc as required complete at site. a) 125 HP | 1 | No. | 1,77,765 | ₹1,77,765 |
| 1.1 | b) 80 HP | 8 | Nos. | 1,21,630 | ₹9,73,040 |
| 1.11 | c) 20 HP | 8 | Nos. | 38,372 | ₹3,06,976 |
| 2 | SITC of vertical sewage submersible pumps set of discharge not less than 44-10 (L/sec) for a Head range (in m) of 15-25 mtrs. suitable 15 HP to operate on 3 phase, 380 volts, 50 Hz, enclosed type of closed coupled construction Class E insulation totally having high efficiency for pumping raw sewage and waste water without clogging and with solid handling size of 35 mm dia at 1.1 specific gravity complete with bottom suction delivery size (in mm) 100 mm, grease lubricated bearing, shaft sealing dual mechanism, pedestal auto coupling for guide rail, cutting mechanism for fibrinous solids, built in motor control with thermistor protection against winding overheating, seal wear out sensor, reverse protection sensor and accessories for automatic operation i/c grouting as per manufacturer design, guide ropes, 10 mtr. multicore cable, 8 mtr. chain complete with all accessories and mountings etc. as required. | 4 | Nos. | 1,98,058 | ₹7,92,232 |
| 3 | SITC of vertical sewage submersible pumps set of discharge not less than 80-6 (L/sec) for a head range (in m) of 6-20 mtrs. suitable 20 HP to operate on 3 phase, 415 volts, 50 Hz, enclosed type of closed coupled construction having class E insulation totally having high efficiency for pumping raw sewage and waste water without clogging and with solid handling size of 45 mm dia at 1.1 specific gravity complete with bottom axial suction delivery size (in mm) 150 mm, grease lubricated bearing, shaft sealing dual mechanism, pedestal auto coupling for guide rail, cutting mechanism for fibrinous solids, built in motor control with thermistor protection against winding overheating, seal wear out sensor, reverse protection sensor and accessories for automatic operation i/c grouting as per manufacturer design, guide ropes, 10 mtr. multicore cable, 8 mtr. chain complete with all accessories and mountings etc. as required. | 4 | Nos. | 2,24,499 | ₹8,97,996 |
| 4 | SITC of 2 HP Centrifugal monobloc pumps set of discharge not less than 21000-6960 L/h. for a head of 12-30 mtrs. suitable to operate on single phase, 230 volts, 50 Hz, totally enclosed type of closed coupled construction totally having high efficiency for pumping raw sewage and waste water without clogging complete with bottom axial suction, grease lubricated bearing, shaft sealing dual mechanism, cutting mechanism for fibrinous solids, built in motor control with thermistor protection against winding overheating, seal wear out sensor, reverse protection sensor and accessories for automatic operation i/c grouting as per manufacturer design, guide ropes, 10 mtr. multicore cable complete with all accessories and mountings etc. as required | 4 | Nos. | 17,860 | ₹71,440 |
| 5 | SITC of 2 HP Borewell submersible pumps set of discharge not less than 410-100 L/m. for a head of 8-30 mtrs. suitable to operate on single phase, 230 volts, 50 Hz, totally enclosed type of closed coupled construction totally having high efficiency for pumping raw sewage and waste water without clogging complete with bottom axial suction, grease lubricated bearing, shaft sealing dual mechanism, cutting mechanism for fibrinous solids, built in motor control with thermistor protection against winding overheating, seal wear out sensor, reverse protection sensor and accessories for automatic operation i/c grouting as per manufacturer design, guide ropes, 10 mtr. multicore cable complete with all accessories and mountings etc. as required | 3 | Nos. | 22,096 | ₹66,288 |
| 6 | SITC of 3-Phase DOL submersible starter in the existing panel/fixing on the wall surface suitable for upto 2 HP pump-set having current rating 4A-6.5A relay rang, AC-3 duty, voltage range 275-475 v i/c drilling holes, connections, testing complete etc. as reqd. | 7 | Nos. | 2,693 | ₹18,851 |
| 7 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
a) 100 mm dia | 90 | Meters | 3,077 | ₹2,76,930 |
| 8 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :
a) 150mm dia | 3 | Nos. | 18,884 | ₹56,652 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.39 MB
BOQ_388421.xls
BOQ • 0.24 MB
Corrigendum15.pdf
PDF • 0.65 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .