REPAIRS TO ROOF, FLOOR, JOINERY, FALSE CEILING, PLUMBING, SANITARY FITTING, TILING, PERIODICAL SERVICES, REPAIR TO FENCING/GATE, PATH, DRAIN AND CAMOUFLAGE PAINTING AND CONCEALMENT FOR CERTAIN BUILDINGS AT 273 SU AFS UNDER GE (AF) BAGDOGRA.

Dismantling of wrought or mild steel work of any description or otherwise provided for complete all as specified and directed.

M&L steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt, welded tubes conforming to IS 1161-1979 grade ST-240 complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings incl ridges complete all as specified and directed.

M&L for Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15 cm thick (above and below ground level) complete all as specified and directed. Note: All debris obtained from demolition shall be removed 1.5km to 2km complete all as specified and as directed.

M&L 40 mm thick cement concrete type B1 1;2:4 (20 mm graded stone aggregate) finishing concrete surface even and fair w/o using extra cement complete all as specified and directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for Powder coated galvanised iron snap grid frame work of size 600 x 600 mm for false ceiling comprising of Main runner 'T' section of size 38mm x 24mm x 0.40mm thickness, Cross 'T' of size 29mm x 24mm x 0.3mm thickness and wall angle of size 24mm x 24mm x 0.43mm thick suspended with 4mm dia GI wire from purlin @ 1.20m c/c and fixed with 4mm thick designer ceiling boards complete all as specified and directed.

M&L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.