SPECIAL REPAIRS TO BLDG NO T 36 OR MD ACCN AT SANYAT LINE UNDER AGE BR III UNDER GE EAST DELHI CANTT 10

Amount

Demolition of cement concrete (unreinforced) in ground floor and paving near 15 cm thick (below or above ground level).

Demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified.

Dismantling Unframed work timber scantling in fillets, rails, posts, rafters, purlins, etc under 40 sq cm in section complete all as specified.

Dismantling framed timber scantling in fillets, rails, posts, rafters, purlins, etc over 40 sq cm in section complete all as specified.

Dismantling wall & ceiling boards of any description and thickness including cover fillets, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

Dismantling water tanks exc 500 but not exc 1000 Litres, and removing to store complete all as specified.

Disconnecting existing tanks, capacity exc 250 & not exe 500 Litres, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting if required reconnecting and refixing in position including cleaning repairing i.e replacement of flush nipple, tank cover, complete all as specified.

Taking down cement or cement lime plaster of any description on brick or stone walls and concrete surface etc including raking out joints hacking for key scrubbing down with water etc complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each and removing to store complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but n.exc 4 sqm each and removing to store complete all as specified.

Taking up or down 15mm steel tubing and connections including fittings complete all as specified.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

M&L 75mm thick cement concrete 1:3:6 type B1 using 20mm graded stone aggregate as in plinth protection & finished the surface even & smooth w/o using extra cement.

M & L for Glazed Coloured Ceramic tiles in vertical surface 300x450x7mm thick laid over 10 mm thick screed bed in CM 1:4,set and joint in neat cement slury and pointed in white or colour cement to match.

M & L for non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified.

M & L for brickwork with subclass `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM1:6 finished even and smooth without using extra cement.

M&L for rendering 10 mm thick in CM1:4 mixed with water proofing compound at the rate of 2% by weight of cement as directed on roof surface finished even and smooth without using extra cement. complete all asspecified and directed by Engineer-in-Chage.( water proofing compound to be measured and paid separately)

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces (Cement plaster 1:4) finished even and smooth without using extra cement

Supply only Integral waterproofing compound complete.

M & L for preparation of new/old plaster sufaces of walls and applying two coats of cement base paint all as specified.

M & L for preparation of new plaster sufaces of walls and applying two coats of oil emulsion distemper all as specified.

M & L for preparation of old sufaces of walls after complete removal of existing treatment and applying two coats of oil emulsion distemper all as specified.

S&F Joist, channel, angle, or tee sections, fixed as in rafter and purlin , without connection plates, etc. ( cut to ordinary lengths i.e within 20mm of the length indicated) to Fe-290-(Gde E- 165) complete all as specified .

S&F Pre-Painted galvanlume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.

S&F Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.

M&L false ceiling with 4mm thick 'E' Board fixed over GI powder coated inverted Tee or'L' section suspended from ceiling with 3mm thick GI wire tie with ceiling/trusses with suitable arrangement complete all as directed and specified (a) Main runner/ Cross tee size 29x24.7x0.8mm (b) Wall angle of size 22.2x22.2x0.65mm (C) Size of grid 600x600mm (d) Two coats oil bound distemper one side of board (e) Powder coating on exposed side of tee/angle

S & F for steel windows with side hung shutters box type including hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified.

S & F for steel windows with side hung shutters box type including hinges with steel handle, and steel peg stay, complete without glazing bars complete all as specified.

S & F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube suppling and fixing in opening as per specification & drawing complete all as specified.

S&F Factory made solid PVC paneled door shutter 30mm thick (style ) consisting of frame made out of M.S frame shall be covered with heat moulded plain colour PVC'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification .

M&L for 35 mm thick flush shutters, solid core construction with block board core and ply wood face panel, commercial type on both sides complete all as specified.

M&L for second class hard wood 30 mm thick skeleton shutters, open rebated and prepared to receive glass, guaze etc edges of framing plain chamfered or rounded fitted with cut and mitred beads of shutters as specified.

S&F 150 mm long mild steel barrel tower bolt, stove enamelled blank with bright bolt and fixed complete all as specified and directed by Engr-in-Charge.

S&F butt hinges medium weight cold rolled mild steel 100mm long.

S&F MS pressed handles , oval type, stove enamelled black 150mm long.

S&Fgalvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of apertue 1.18mm and fixed with stainless steel wire staples complete all as specified.

S&F 250 mm long mild steel sliding door bolts, plate type, stove enamelled black, with brigh bolt not less than 12 dia with and incluidng 1 minimum of 6 bolts and nuts four or bolt plate and tow on staple plate complete all as specified.

M&L for preparation of new wooden surfaces & applying 2 coats of synthetic enemel paint over a coat of pink primer complete all as specified.

M & L for applying two coats of synthetic enamel ordinary tint paint inclduing red oxide primer and prepartion extra complete on new steel or iron surfaces of any description, over 10cm in width or grith, not otherwise described complete all as specified.

S&F 20 mm bore GI tubes medium grade with all fitting and fixed complete to wall and ceilings or laid in floor.

S&F 15mm bore tubes medium grade galvanised with all fitting and fixed complete to wall and ceilings or laid in floor.

M & L for 500 Litres rotational moulded polyethylene tripple layered water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified.

S & F 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed (minimum weight -210gms) complete all as specified.

S & F in repair 15mm bore, fancy type bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

S & F in repair fancy type 15mm bore CP angle valve/ stop valve, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified.

S & F in repair ISI marked 20mm bore stop valve, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed.

S & F of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2, for iron pipe of size 25mm bore complete all as specified.

S & F of ISI Marked 15mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified.

S & F in repairs 100 / 125mm bore CP steel grating with hole complete all as specified and as directed by Engr in Charge..

S&F in repairs 10 ltrs capacity PVC low level flushing cistern white inlet floatvalve, handle complete including brackets complete all as specified.

S & F in repairs Vitreous china squatting pan 'Orissa' pattern size 580x440 mm white with integral foot rest including connection to trap and flushing pipe complete all as specified.

S & F 450mm long 15mm bore PVC connection with two number fly nut.

S & F in repair 75mm bore dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified.

Taking down carefully old unserviceable copper/aluminium point wiring From existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket etc are to be measured seperately and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing etc complete all as directed.

M&L in replacement for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and stranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers except conduit junction box (junction box will be of MS) including FRLS, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size for fixing modular switches/sockets/fan regulator etc , with and including Modular cover plates of suitable size and making good surface as original by plastering, whitewash/colour and distemper etc complete all as directed for the following :-(Note : The cost of modular type Metal boxes and modular accessories like cover plates will be included in quoted rate.):

(a) one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

(b) one socket outlet point 5 amps on the same board.

(c) one socket outlet point 5 amps on the independent board.

All as per srl item no. 59 here-in-before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for 15 Amp light point.Note : The point wiring for power point will not be mixed with light/fan point circuit or not in the same conduit pipe

M&L for switch piano flush type single pole 1 way 5 Amp, complete all as directed.

M&L for switch piano flush type single pole 1 way 15 Amp, complete all as directed.

M&L for socket outlet 2 in 1, 5 pin 5 Amp,flush type, complete all as directed.

M&L for socket outlet 2 in 1, 6 pin, 5 & 15 Amp flush type , complete all as directed.

S & F of stepped type electronic Fan regulator flush type complete all as directed.

S & F Bell Push Single pole, Flush type 230 V 50Hz complete with all accessories as directed by Engr- in -Charge.

S & F Bell Ding Dong type Single pole 230 V 50Hz complete with all accessories as directed by Engr- in -Charge.

M&L in replacement for Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC concealed conduit 25 mm dia with and including 6.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed. Note : 1. The conduit and conduit accessories shall be measured and paid as one unit. 2. The cost of earth wire is included in the quoted rates.

Supply and fixing in replaement of MCCB Incommer Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, VTPN 04 way, 240 volts with bus bar rating 200 Amps including dust and vermin proof and making all necessary connections complete all as directed.

Supply and fixing in replaement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 08 way, 240 volts with bus bar rating 200 Amps including dust and vermin proof and making all necessary connections complete all as directed.

S & F in replacement of MCCB 3P 100 Amp, with breaking capacity 25 KA suitable for 415 volts AC supply, with over load and short circuit protection complete all as specified.

Supply and fixing in replacement of MCB C Curve type, 10 KA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.

Supply and fixing in replacement of MCB C Curve type, 10 KA, 32 Amp, SPN with over load and short circuit protection complete all as directed.

Supply and fixing in replacement of LED tube light fitting 22 W to wall mounting type with and including all electric connections with two core PVC insulated, PVC sheathed copper conductor flexible cable complete all as specified.

S & F of Batten holder PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified.

S & F of LED bulb 9W for batten holder complete all as specified.

Supply and fixing of Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as directed.

S & F in replacement of Energy efficient wall mounted LED Bulk Head luminaire 10W made of die cast Aluminium with Opal diffuser IP-65 complete all as specified and directed.

Material and labour in replacement for earthing complete with GI earth plate electrode 600 mmx 600mm x 6mm thick burried directly in ground not less than 2.25 mtrs below ground level, with top edge of the plate not less than 1.5 mtrs deep below normal ground level, connected to galvanised earth wire 4mm by means of bolts, nuts check nuts to earth test point including necessary PCC 1:2:4 type B-1 pit, cover frame, GI pipe 15mm dia light grade for protection of earthing lead and GI pipe 20 mm dia for watering pipe with funnel, wire mesh, salt, charcoal dust and excavation complete all as directed.

M/s Shubh Enterprises

M/S GR construction compony

JAIPAL AND BROTHERS

Simran construction Company

aggarwal engineers contractors

S GOURAV PRAKASH ENTERPRISES

M/s Durga Traders

MAA SANTOSHI ENTERPRISES

LAXMI GROUP