REPAIR/REPLACEMENT OF STEEL AND WOODEN FURNITURE AT NIMU MILITARY STATION UNDER AGE (I) NIMU

Amount

REPAIR /REPLACEMENT OF STEEL FURNITURE AT NIMU MIL STN UNDER AGE (I) NIMU

REPAIR TO ALMIRAH LARGE STEEL FD-1031

(a) Removing of old unserviceable 3 way locking device complete of almirah medium steel and S&F new 3 way locking device made to shape as required and all as specified in drg and directed by Engr-in-Charge

(b) Removing of existing old locks of almirah medium steel and S&F new lock of 5 lever with duplicate keys and fixing in proper functional position as original shape all as specified and directed by Engr-in-Charge . Make: RAINA/REENA/BAJRANG

(C) Removing of existing old unserviceable handles including necessary nut,bolts,washer etc of almirah medium steel and S&F new chromium plated handles including necessary nut,bolts,washer etc all as specified & directed by Engr-in-Charge

(d) Taking out existing shelves and refixing in position including necessary nuts,bolts ,washers etc all as directed by Engineer-in-Charge

(e) Removing of old unserviceable legs of almirah medium steel and S&F new legs made out of 1 mm thick MS sheet made to shape and providing two coat of olive green or silver grey paint over a coat of red oxide primer all as shown on drawing and directed by Engineer-in Charge

Applying Spray painting all steel surface with existing shade and color or approved by GE after application of sand paper and grinder to make the surface smooth and even and application of red oxide primer.

REPAIR TO ALMIRAH MEDIUM STEEL FD-1032 FD-243

(a) Removing of old unserviceable 3 way locking device complete of almirah medium steel and S&F new 3 way locking device made to shape as required and all as specified in drg and directed by Engr-in-Charge

(b) Removing of existing old locks of almirah medium steel and S&F new lock of 5 lever with duplicate keys and fixing in proper functional position as original shape all as specified and directed by Engr-in-Charge . Make: RAINA/REENA/BAJRANG

(C) Removing of existing old unserviceable handles including necessary nut,bolts,washer etc of almirah medium steel and S&F new chromium plated handles including necessary nut,bolts,washer etc all as specified & directed by Engr-in-Charge

(d) Taking out existing shelves and refixing in position including necessary nuts,bolts ,washers etc all as directed by Engineer-in-Charge

(e) Removing of old unserviceable legs of almirah medium steel and S&F new legs made out of 1 mm thick MS sheet made to shape and providing two coat of olive green or silver grey paint over a coat of red oxide primer all as shown on drawing and directed by Engineer-in Charge

Applying Spray painting all steel surface with existing shade and color or approved by GE after application of send paper and grinder to make the surface smooth and even and application of red oxide primer.

REPAIR TO LOCKER STEEL FD-257 FD-1029

(a) Removing of old broken /unserviceable steel conduit pipe and S&F new conduit pipe of size 20 mm dia and 1.6 mm thick with appropriate bracket of steel made to shape as shown on drg and directed by Engr-in-Charge

(c) Removing of old broken /unserviceable existing hasp and staples, handles of Locker steel and S&F new hasp and staples of size 75x30x2 mm handle mild steel chromium plated made to shape all as shown on drg ISI markes and as directed by Engr-in-Charge

(d) Removing of old/unserviceable legs of locker steel and S&F new legs made out of 1 mm thick MS sheet made to shape and providing two coat of OG paint over a coat of red oxide primer all as shown on drawing and directed by Engineer-in-Charge.

Applying Spray painting all steel surface with existing shade and color or approved by GE after application of send paper and grinder to make the surface smooth and even and application of red oxide primer.

Chair Varndha FD/MAP-II/06

Removing of cane,& welded with existing surface etc all as directed by Engineer -in-charge.

Re-caning of chair varndha with polythene white cane half round as per IS-5378-1968,0.3mmthick of seat and 3 to 3.2mm wide including supply of new cane complete in back & rest as per Drg all as per all as directed by Engr -in-charge make of cane : Shah/Primer/Ajay.

Painting of two coats of white paint existing surface all as directed by Engineer-in-charge.

REPAIR TO TABLE Clk STEEL WITH DRAWER FD-1004

(a) Removing of u/s top and S&F new top 18/19 mm thick pre-laminated particle board exterior grade ISI marked teak finish on one side and other white make Novapan/Bhutan Board/Kitply/Decco/Mysore with 4 mm thick beading all around the table

(b) Replacement of old u/s drawer of table clk steel with drawer with new one of MS sheet as per drg and directed by Engr in Charge

(c) Replacement of old u/s lock with new one

(d) Removing existing unserviceable parts of table clk with drawer steel and S&F new parts made of square pipe of 25mmx25mm and 1.6 mm thickness by running welding all as specified and directed by Engr-in-charge

(e) Description all as per item No 5.00 here in before but replacement of rubber shoe with S&F new rubber shoe of superior quality with suitable size complete all as directed by Engr in charge

Applying Spray painting all steel surface with existing shade/ OG paint and color or approved by GE after application of send paper and grinder to make the surface smooth and even and application of red oxide primer.

REPAIR TO TABLE OFFICE OFFR STEEL WITH DRAWER FD-1003

(a) Removing of u/s top and S&F new top 18/19 mm thick pre-laminated particle board exterior grade ISI marked teak finish on one side and other white make Novapan/Bhutan Board/Kitply/Decco/Mysore with 4 mm thick beading all around the table offr office steel

(b) Replacement of old u/s drawer of table Office Offr steel with drawer with new one of MS sheet as per drg and direted by Engr in Charge

(c) Replacement of old u/s lock with new one

(d) Removing existing unserviceable parts( Stiffner) of table Office officers steel and S&F new parts made of square pipe of 25mmx25mm and 1.6 mm thickness by running welding all as specified and directed by Engr-in-charge

(e) Description all as per item No 5 here in before but replacement of rubber shoe with S&F new rubber shoe of superior quality with suitable size complete all as directed by Engr in charge

Applying Spray painting all steel surface with existing shade/ OG paint and color or approved by GE after application of send paper and grinder to make the surface smooth and even and application of red oxide primer.

REPAIR TO TABLE 3'x2' STEEL WITH DRAWER FD-1008

(a) Removing of u/s top and S&F new top 18/19 mm thick pre-laminated particle board exterior grade ISI marked teak finish on one side and other white make Novapan/Bhutan Board/Kitply/Decco/Mysore with 4 mm thick beading all around the table

(b) Replacement of old u/s drawer of table 3x2 steel with drawer with new one of MS sheet as per drg and direted by Engr in Charge

© Replacement of old u/s lock with new one

(d) Removing existing unserviceable parts( Stiffner) of table 3'X2' with drawer steel and S&F new parts made of square pipe of 25mmx25mm and 1.6 mm thickness by running welding all as specified and directed by Engr-in-charge

(e) Description all as per item No7.00 here in before but replacement of rubber shoe with S&F new rubber shoe of superior quality with suitable sizecomplete all as directed by Engr in charge

Applying Spray painting all steel surface with existing shade/ OG paint and color or approved by GE after application of send paper and grinder to make the surface smooth and even and application of red oxide primer.

CHARPOY GI PIPE PLYWOOD TOP FD-220

(a) Removing of unserviceable plywood top and supply and fixing 12 mm thick plywood commercial BWR plywood ISI marked make Kit ply/Green ply/Duro and fixing same with two nos of MS square pipe 1"x1" ,fix bolts nuts and washers bolts of size 5x65mm 12 nos round head bolts after drilling the three holes of each long rail and drilling two hole on each short rail and two hole in flat iron complete all as directed including tightening of loose frame/fixing loose charpoy GI pipe component to make the frame fit for fixing complete all as per specified and as direction by Engr-in-Charge

(g) Opening of joints of GI Charpoy 32 mm pipe where repaired and reassembling incl provision at bottom of legs shall be plugged with 3 mm thick mild steel sheet welded to bottom of legs and hard wood plugs shall not be provided.

(b) Removing of unserviceable elbow of charpoy GI pipe andS&F three way GI elbow 32 mm medium grade ISI marked complete all as specified and directed by Engr-in-Charge

(c) Removing of unserviceable check nut of GI charpoy and S&F new check out32 mm bore 10 mm thick suitable for charpoy GI pipe 32 mm bore complete all as specified and directed

(d) M&L for removing the threadless /broken long rails from charpoy GI pipe 32 mm and S&F new long rail of 32 mm dia GI pipe medium grade 1.88 mm long threaded at both ends and fixed to existing three way elbow 32 mm dia and all as shown on drawing (GI pipe make TATA/JINDAL)

(e) Taking out existing old broken short rail from Charpoy GI 32 mm dia and providing in position 1 Nos short rails made out of broken long rail obtained from taking down above item including threading on both ends complete fixing all as specified and shown on drg (Note:u/s check nuts to be replaced in above item and measured and paid as supply only under relevant items

(f) Taking out existing old broken legs from Charpoy GI 32 mm dia and providing 01 No new legs in position made out of old brokenshort rail obtained from taking down above item and S&F 3 mm thick and 40 mm dia MS plate welded at bottom of leg and two nos MS clamp made out of 25x3 mm size FI welded legs including threading on top and painting of clamp with two coat of synthetic enamel paint over coat of oxide primer and complete all as specified and directed by Engineer-in-Charge.

CHARPOY DOUBLE BUNK PLYWOOD TOP FD-220

(a) Removing of unserviceable plywood top and supply and fixing 12 mm thick plywood commercial BWR plywood ISI marked make Kit ply/Green ply/Duro and fixing same with two nos of MS square pipe 1"x1" ,fix bolts nuts and washers bolts of size 5x65mm 12 nos round head bolts after drilling the three holes of each long rail and drilling two hole on each short rail and two hole in flat iron complete all as directed including tightening of loose frame/fixing loose charpoy double bunk component to make the frame fit for fixing complete all as per specified and as direction by Engr-in-Charge

(f) Supply and Welding of MS iron strip complete all as specified and directed by Engineer-in-Charge.

CHARPOY IP HARD TOP FD-MAP-04

(a) Taking out of unserviceable ply wood top from Charpoy IP hard top by loosening the nut bolts with washers. S&F new 12 mm thick ply wood commercial BWR grade plywood fixed to charpoy IP Hard Top with new nut, bolts.ISI marked make Kit ply/Green ply/Duro as per specified and shown on drg and as direction by Engr-in-charge

(a) Painting all steel surface with existing shade ( black paint) and colour as per approved quality as shown on drg and directed by Engr-in-Charge.

(a) Hard rubber shoes as shown on drg and directed by Engr-in-Charge.

REPAIR TO CHAIR TUBULAR STEEL WITHOUT ARMS FD-75(M)

(a) Removing unserviceable seats ( back & bottom) from chair tubular steel with & without arms and new S&F 32 mm thick Ist class HW seasoned sheesham wood seat & Welded 2x2 mm thick MS flat as per existing size and shape fixed with suitable bolts,nuts and washer including polishing and complete all as per directed by EIC

(b) S&F in repair hard rubber shoe black 20 mm dia suitable for bottom of steel chair

(c) S&F in repair hard rubber cap black suitable for 20 mm dia at top of steel chair complete

Painting of two coats of OG Paint existing surface all as directed by Engineer-in-charge.

REPAIR TO CHAIR TUBULAR STEEL WITH/WITHOUT ARMS FD-75(M)

(a) Removing unserviceable seats ( back & Bottom)from chair tubular steel with & without arms and new S&F 32 mm thick Ist class HW seasoned sheesham wood seat & Welded 2x2 mm thick MS flat as per existing size and shape fixed with suitable bolts,nuts and washer including polishing and complete all as per directed by EIC

(b) Taking out US arms rest from steel chair with arms and supply and fixing chair arms rest with suitable bolts, nuts and washer

(c) S&F in repair hard rubber shoe black 20 mm dia suitable for bottom of steel chair

(d) S&F in repair hard rubber cap black suitable for 20 mm dia at top of steel chair complete

Painting of two coats of OG Paint existing surface all as directed by Engineer-in-charge.

CHAIR COMPUTER TP

Removing old unserviceable tapestry cloth and foam of cushion for both seat and back of chair and S&F(upholstery) of new tapestry blue colour cloth & foam 50mm thick 40 density as per drg and as directed by Engr-in- charge. Make Godraj/Sleepwell/Kurlon

Supply & fixing of old u/s power hydraulic central tit mechanishm with new one ass as per drg and directed by Engr in Charge.

CHAIR REVOLVING WITH ARMS FD-75(M)

Removing old unserviceable tapestry/ leather cloth and foam of cushion for both seat and back of chair and S&F(upholstery) of new tapestry blue colour cloth & foam 50mm thick 40 density as per drg and as directed by Engr-in- charge. Make Godraj/Sleepwell/Kurlon

Supply & fixing of old u/s power hydraulic central tit mechanishm with new one ass as per drg and directed by Engr in Charge.

CHAIR CBA STEEL WITH HAND REST (FD-120(M)

Re-caning of chair CBA Steel with polythene white cane half round as per IS-5378-1968,0.3mmthick of seat and 3 to 3.2mm wide including supply of new cane complete as per Drg all as per all as directed by Engr -in-charge make of cane : Shah/Primer/Ajay.

Removing of old broken leg & replace with new one & welded it all as directed by Engineer-in-charge.

S&F in replacement of rubber shoes with new PVC shoes of supper Quality with steel plated screws of suitable size complete all as directed by Engr -in -charge.

TABLE DINING OR'S ALUMINIUM TOP FD 165 ( R )

Replacement of old u/s top with new Top 18mm thick exterior grade plywood & fixing with 0.8 mm Aluminium sheet with synthetic adhesive (Fevicol SH) make of MDF board century/Archid/Green/Actiontesa. A per drg and directed by Engr in charge

Rubber shoes as per drg

Legs 25 mm 16 gauge square MS pipe

Stiffner of 25 mm 16 gauge square MS pipe

Applying Spray painting all steel surface with existing shade and color or approved by GE after application of send paper and grinder to make the surface smooth and even and application of red oxide primer.

REPAIR / REPLACEMENT OF WOODEN FURNITURE AT NIMU MIL ST UNDER AGE (I) NIMU

BED PLYTOP FD-246 Removing of unserviceable back rest of bed and S&F New back rest as per existing size and shape of 1st Class seasoned wood incl polishing two coat of over coat of wood filter after preparation of surface etc.

Removing of unserviceable foot rest of bed and S&F New foot rest as per existing size and shape of 1st Class seasoned teak wood incl polishing two coat of over coat of wood filter after preparation of surface etc.

Removing of old ply top and S&F new ply top of 12mm thick commercial type ISI Marked all as shown in Drg .Make Greenply/century/Bhuan board/durian

Removing of old wooden stiffeners and S&F 1st class hard wood stiffeners of size 50x60 suitable for bed all as shown in drg incl polishing two coat preparation of surface etc.

Taking out old UNSV long rail of bed plywood and providing of new long rail of 1st class HW (Sheesham) of exiting shape and size all as specified and Drg incl polishing two coats of wood filter after preparation of surface etc.

M&L for preparation of wood of bed plywood and provide of new short rail 1St class HW (Sheesham) of existing shape and size all as specified and Drg incl polishing two coats of French polish of reqd shade complete all as directed by the Engr -in -charge.

CHAIR DINING LONG BACK FD-357 Removing of old unserviceable rear leg with back and S&F of new rear legs with back of seasoned teak wood all as per drg incl polishing two coat of wood filter after preparation of surface.

All as per item ser no 18.00 above but front leg.

All as per item ser no 18.00 above but Rails.

Removing old unserviceable tapestry cloth and foam of cushion for both seat and back of chair and S&F(upholstery) of new tapestry cloth & foam 50mm thick 40 density as per drg and as directed by Engr-in- charge. Make Godraj/Sleepwell/Kurlon

M&L for preparation of wooden surface of chair dining long back by scrubbing with grit paper to smooth the surface and applying two coats of French polish of required shape complete all as directed by Engr -in- charge.

CHAIR WRITING FD- 280,FD -1107 Opening of joints of damage/broken member of chair writing where required for replacement including removing of cane, if necessary polishing new parts with French polish including cleaning , and preparation of the surface to match with existing surface etc all as directed by Engineer -in-charge.

S&F Front leg (left or right ) Made out of 1st class HW Sheesham teak wood of size and shape as per existing chair or as per drg including polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface all as directed by Engineer-in-charge.

All as per item No-19.00 above but Rear leg (left or right ) all as directed by Engr -in -charge.

All as per item No-19.00 above but front /rear/side members of seat bottom.

All as per item No-19.00 above but back stiffener.

All as per item No-19.00 above but bottom stiffener.

S&F front arms made out with 1st class HW seasoned wood of size and shape as per existing chair or as per Drg all as per all as directed by Engr -in -charge.

S&F in replacement of shoes with new PVC Shoe of super quality with steel plated screws of suitable size complete as per Drg all as per all as directed by Engr -in -charge.

Re-caning of chair writing with polythene white cane half round as per IS-5378-1968,0.3 mmthick of seat and 3 to 3.22mm wide including supply of new cane complete as per Drg all as per all as directed by Engr -in-charge make of cane : Shah/Prmier/Ajay.

M&L for preparation of wooden of chair writing by scrubbing with grit paper to smooth the surface and applying two coats of French polish of required shape complete all as directed by Engr -in -charge.

CHAIR DINING (FD-279,FD-228 and FD- 1105) Opening of joints of damage/broken member of chair dining where required for replacement including removing of cane, if necessary polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface etc all as directed by Engineer -in-charge.

Re-caning of chair dining with polythene white cane half round as per IS-5378-1968,0.3mmthick of seat and 3 to 3.2mm wide including supply of new cane complete as per Drg all as per all as directed by Engr -in-charge make of cane : Shah/Primer/Ajay.

S&F front legs (left and right):- Made out of 1st class HW seasoned seesham wood of size and shape as per existing chair or as per drg including polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface all as directed by Engineer-in-charge.

All as per item No-20.00 above but rear leg (left and right)

All as per item No-20.00 above but S&F of front /Rear/side rail of chair dining as per directed by Engr-in-charge.

All as per item No-20.00 above but back members of chair dining.

All as per item No-20.00 above but bottom stiffner.

S&F in replacement of rubber shoes with new PVC shoes of supper Quality with steel plated screws of suitable size complete all as directed by Engr -in -charge.

CHAIR EASY (FD 229,FD 1105) Opening of joints of damage/broken member of chair easy where required for replacement including removing of cane,if necessary polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface etc all as directed by Engineer -in-charge.

Re-caning of chair easy with polythene white cane half round as per IS-5378-1968,0.3mmthick of seat and 3 to 3.2mm wide including supply of new cane complete as per Drg all as per all as directed by Engr -in-charge make of cane : Shah/Primer/Ajay.

S&F Front leg (left or right ) Made out of 1st class HW seasoned teak wood of size and shape as per existing chair or as per drg including polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface all as directed by Engineer-in-charge.

All as per item No-21.01 above but Rear leg (left or right ) all as directed by Engr -in -charge.

All as per item No-21.00 above but Armrest

All as per item No-21.00 above but bottom stiffener.

S&F in replacement of shoe with new PVC shoe of super quality with steel pelted screws of suitable size complete all as directed by Engr -in- charge.

M&L for preparation of wooden surface of chair easy by scrubbing with grit paper to smooth the surface and applying two coats of French polish of required shape complete all as directed by Engr -in -charge.

FORM WITHOUT BACK FD-77 Replace H/W wooden planks made out of seasonal seesham ,size as per required as per drg and directed by Engr in Charge.

M&L for preparation of wooden surface of form without back by scrubbing with grit paper to smooth the surface and applying two coats of smoke grey/ OG Paints of required shape complete all as directed by Engr -in -charge.

SOFA SET 4 SEATER FD-281 Replace old unserviceable 4 cushion with new cover of standard density with tapestery cloth of Sofa set 4 seater cushioned as per drg and directed by Engr in Charge

Preparation of wooden surface of Sofa set 4 seater the surface and applying two coats of French/ leather polish all as directed by Engr -in -charge.

SOFA SET 5 SEATER FD-281 Replace old unserviceable 10 cushion with new cover of standard density of Sofa set 5 seater cushioned as per drg and directed by Engr in charge

Preparation of wooden surface of Sofa set 5 seater the surface and applying two coats of French/ leather polish all as directed by Engr -in -charge.

HAT STAND WITH MIRROR FD-362 Replacement of of damage/broken hooks( 4x peg set) of Hat Stand with mirror where required for replacement all as directed by Engineer -in-charge.

M&L for preparation of wooden surface of hat stand by scrubbing with grit paper to smooth the surface and applying two coat of French polish of required shade complete all as directed by the Engr -in- charge.

Replacement of old u/s / broken mirror of hat stand with mirror having standard density or as per drg and directed by Engr in Charge

TABLE BEDSIDE FD-276 Taking down old unserviceable Top of table bed side and S&F new Top of 18/19 mm thick pre-laminated particle board exterior grade ISI marked 1st Class seasoned wood beading 4mm thick all round including polishing to beading as per existing shape Opening of joints of damage/broken member of Table bedside where required for replacement ,if necessary polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface etc all as directed by Engineer -in-charge.

Opening of joints of damage/broken member of Table bedside where required for replacement ,if necessary polishing new parts with french polish including cleaning and preparation of the surface to Shelf with existing surface etc all as directed by Engineer -in-charge.

M&L for preparation of wooden surface of tabe bed side by scrubbing with grit paper to smooth the surface and applying two coat of French polish of required shade complete all as directed by the Engr -in- charge.

TABLE COMPUTER FD/E6/MAP/03 Taking down old unserviceable top of Computer table and S&F new size of 18/19 mm thick pre laminated particle board exterior grade ISI marked and 1st Class seasoned wood beading 6mm thick all round including polishing to beading (two coats over a coat of wood filter ect.) as directed by Engr -in - Charge Make Greenply/Bhutan/Durain

S&F of new key board board( steel railing) with old u/s steel railing key board all as per drg

Removing of unserviceable broken leg of computer table and S&F New leg 1st Class seasoned teak wood all as per drg or existing pattern and incl polishing two coat of over coat of wood filter after preparation of surface etc.

TABLE PEG FD-277 Tacking down old unserviceable top of Peg table and S&F new size of 18/19 mm thick pre laminated particle board exterior grade SI marked and 1st Class seasoned teak wood beading 6mm thick all round including polishing to beading (two coats over a coat of wood filter ect.) as directed by Engr -in - Charge Make Greenply/Bhutan/Durain

Removing of unserviceable broken leg of peg table and S&F New leg1st Class seasoned teak wood all as per drg or existing pattern and incl polishing two coat of over coat of wood filter after preparation of surface etc.

TABLE CENTRE FD-235 Taking down old unserviceable top of Table centre and S&F new size of 18/19 mm thick pre-laminated particle board exterior grade ISI marked and 1st Class seasoned wood beading 4mm thick all round including polishing to beading (two coats over a coat of wood filter ect.) as directed by Engr -in - Charge Make Greenply/Bhutan/Durain

Taking down old unserviceable Side Rail of frame any size and S&F Rail of 1st Class seasoned teak wood planned & finishing smooth of existing shape and size and polishing with French polishing (two coats over a coat of wood filter ect.) as directed by Engr -in - Charge

Taking down old unserviceable leg of table centre and S&F new leg made as per existing size and shape or asper Drg 1st Class seasoned teak wood planned & finishing smooth of existing shape and size and polishing with French polishing (two coats over a coat of wood filter ect.) as directed by Engr -in - Charge

M&L for preparation of wooden surface of table Centre with sun mica top side by scrubbing with grit paper to smooth the surface and applying two coat of french polish of required shade complete all as directed by the Engr -in- charge.

TEAPOY WOODEN FD- 278 Removing of unserviceable Top of teapoy and S&F new Top 18/19 mm thick pre-laminated particle board BWR type Gde 1 as per Drg ISI Marked and 1st Class seasoned wood beading 6mm thick all round including polishing to beading (two or more coat over a coat of wood filter ect.) as directed by Engr -in - Charge Make Greenply/Bhutan/Century/Durain

Removing of unserviceable broken stiffener/long rail/side rails of teapoy and S&F new stiffeners /long rail/side rails made of 1st Class teak wood all as per Drg or existing pattern including polishing new parts with French polishing including cleaning and preparation of the surface to match with exiting surface all as shown on drawing and as directed by Engr -in - Charge

Removing of unserviceable broken legs of teapoyand S&F new legs made of 1st Class teak wood all as per Drg or existing pattern including polishing new parts with French polishing including cleaning and preparation of the surface to match with exiting surface all as shown on drawing and as directed by Engr -in - Charge

M&L for preparation of wooden surface of teapoy by scrubbing with grit paper to smooth the surface and applying two coat of French polish of required shade complete all as directed by the Engr -in- charge

TABLE WRITING FD -275 Taking down old unserviceable top of table writing and S&F new Top made of of 18/19 mm thick pre laminated particle board exterior grade ISI marked and with1st Class seasoned teak wood beading 6mm thick all round including polishing to beading (two coats over a coat of wood filter ect.) as directed by Engr -in - Charge Make Greenply/Bhutan/Durain

Taking down old unserviceable bottom stiffeners of table writing and S&F new bottom stiffeners size 50x25 mm thick made out of 1st class as per Drg or existing pattern including polishing new parts with French polishing including cleaning and preparation of the surface to match with existing surface all as shown on drawing and directed by Engr –in – Charge. Greenply/Bhutan/Durain.

Tacking down old unserviceable leg of table writing and S&F new legs made out of 1st class teak wood seasoned all as per Drg or of existing patterns etc including polishing new parts with French polishing including cleaning and preparation of the surface to match with existing surface all as shown on drawing and directed by Engr –in – Charge.

Removing of old u/s drawer of table wriiting , S&F new drawer with knob as per drg and directed by Engr in Charge

Removing and repalcement of old u/s lock with new one as per drg and directed by Engr in charge

M&L for preparation of wooden surface of table Writing side by scrubbing with grit paper to smooth the surface and applying two coat of French polish of required shade complete all as directed by the Engr -in- charge .

TABLE 600x600x760mm (2'x2') FD-95(M)/293 Removing of unserviceable Top of Table 600x600 and S&F new Top 18/19 mm thick pre-laminated particle board BWR type Gde 1 as per Drg ISI Marked and 1st Class seasoned wood beading 6mm thick all round including polishing to beading (two or more coat over a coat of wood filter ect.) .) Providing two coats of OG paint over a coat of primer all legs and steel frame as specified and directed by Engr-in-Charge .

Removing of unserviceable broken stiffener/long rail/side rails of table and S&F new stiffeners /long rail/side rails made of 1st Class teak wood all as per Drg or existing pattern including polishing new parts with French polishing including cleaning and preparation of the surface to match with exiting surface all as shown on drawing and as directed by Engr -in - Charge

Removing of unserviceable broken legs of table and S&F new legs made of 1st Class teak wood all as per Drg or existing pattern including polishing new parts with French polishing including cleaning and preparation of the surface to match with exiting surface all as shown on drawing and as directed by Engr -in - Charge.

M&L for preparation of wooden surface of table by scrubbing with grit paper to smooth the surface and applying two coat of French polish of required shade complete all as directed by the Engr -in- charge

TABLE 900x900x760mm (3'x3') FD-88(M), FD-291 Removing of unserviceable Top of Table 900x900 and S&F new Top 18/19 mm thick pre-laminated particle board BWR type Gde 1 as per Drg ISI Marked and 1st Class seasoned teak wood beading 6mm thick all round including polishing to beading (two or more coat over a coat of wood filter ect.) .) Providing two coats of OG paint over a coat of primer all legs and steel frame as specified and directed by Engr-in-Charge .

Removing of unserviceable broken stiffener/long rail/side rails of table and S&F new stiffeners /long rail/side rails made of 1st Class teak wood all as per Drg or existing pattern including polishing new parts with French polishing including cleaning and preparation of the surface to match with exiting surface all as shown on drawing and as directed by Engr -in - Charge

Removing of unserviceable broken legs of table and S&F new legs made of 1st Class teak wood all as per Drg or existing pattern including polishing new parts with French polishing including cleaning and preparation of the surface to match with exiting surface all as shown on drawing and as directed by Engr -in - Charge

M&L for preparation of wooden surface of table by scrubbing with grit paper to smooth the surface and applying two coat of French polish of required shade complete all as directed by the Engr -in- charge.

TABLE 3'x2' WITH DRAWER (FD-283 ) Removing of unserviceable Top of table 3x2 and S&F new Top 18/19 mm thick pre-laminated particle board BWR type Gde 1 as per Drg ISI Marked and 1st Class seasoned wood beading 6mm thick all round including polishing to beading (two or more coat over a coat of wood filter ect.) providing two coats of OG paint over a coat of primer all legs and steel frame as specified and directed by Engr-in-Charge .

Removing of unserviceable broken stiffener/long rail/side rails of table 3x2 and S&F new stiffeners /long rail/side rails made of 1st Class teak wood all as per Drg or existing pattern including polishing new parts with French polishing including cleaning and preparation of the surface to match with exiting surface all as shown on drawing and as directed by Engr -in - Charge

Removing of unserviceable broken legs of table 3x2 and S&F new legs made of 1st Class teak wood all as per Drg or existing pattern including polishing new parts with French polishing including cleaning and preparation of the surface to match with exiting surface all as shown on drawing and as directed by Engr -in - Charge

Removing of od u/s drawer of table 3x2 wooden , S&F new drawer with knob as per drg and directed by Engr in Charge

M&L for preparation of wooden surface of table 3x2 by scrubbing with grit paper to smooth the surface and applying two coat of French polish of required shade complete all as directed by the Engr -in- charge

TABLE DINING 6 PERSONS FD-230, FD-1115: Removing of unserviceable Top of Table 6 person and S&F new Top 18/19 mm thick pre-laminated particle board BWR type Gde 1 as per Drg ISI Marked and 1st Class seasoned wood beading 6mm thick all round including polishing to beading (two or more coat over a coat of wood filter ect.) as directed by Engr -in - Charge Make Greenply/Bhutan/Century/Durain

Removing of unserviceable broken stiffener/long rail/side rails of tables and S&F new stiffeners /long rail/side rails made of 1st Class teak wood all as per Drg or existing pattern including polishing new parts with French polishing including cleaning and preparation of the surface to match with exiting surface all as shown on drawing and as directed by Engr -in - Charge

Removing of unserviceable broken legs of Table dining 6 pers and S&F new legs made of 1st Class teak wood all as per Drg or existing pattern including polishing new parts with French polishing including cleaning and preparation of the surface to match with exiting surface all as shown on drawing and as directed by Engr -in - Charge

M&L for preparation of wooden surface of Table dining 6 persn by scrubbing with grit paper to smooth the surface and applying two coat of French polish of required shade complete all as directed by the Engr -in- charge

TABLE DINING 8 PERSONS FD-273, FD-1115 : Removing of unserviceable Top of Table 8 person and S&F new Top 18/19 mm thick pre-laminated particle board BWR type Gde 1 as per Drg ISI Marked and 1st Class seasoned wood beading 6mm thick all round including polishing to beading (two or more coat over a coat of wood filter ect.) as directed by Engr -in - Charge Make Greenply/Bhutan/Century/Durain

Removing of unserviceable broken stiffener/long rail/side rails of tables and S&F new stiffeners /long rail/side rails made of 1st Class teak wood all as per Drg or existing pattern including polishing new parts with French polishing including cleaning and preparation of the surface to match with exiting surface all as shown on drawing and as directed by Engr -in - Charge

Removing of unserviceable broken legs of Table dining 6 /8 pers and S&F new legs made of 1st Class teak wood all as per Drg or existing pattern including polishing new parts with French polishing including cleaning and preparation of the surface to match with exiting surface all as shown on drawing and as directed by Engr -in - Charge

M&L for preparation of wooden surface of Table dining 8 persn by scrubbing with grit paper to smooth the surface and applying two coat of French polish of required shade complete all as directed by the Engr -in- charge

Chair Easy Cushioned ,Opening of joints of damage/broken member of chair easy where required for replacement including removing of cane, if necessary polishing new parts with French polish including cleaning and preparation of the surface to match with existing surface etc all as directed by Engineer -in-charge.

Re-caning of chair easy with polythene white cane half round as per IS-5378-1968,0.3mmthick of seat and 3 to 3.2mm wide including supply of new cane complete as per Drg all as per all as directed by Engr -in-charge make of cane : Shah/Primer/Ajay.

Replacement of old u/s 04 cushion with new one having standard density of tapestery cloth all as directed by Engineer-in-charge.

TABLE DRESSING GENTS WITH MIRROR (FD-230 & FD-379) :- Removing and replacement of old existing broken top of table dressing Gents of any description in any position and replacement of the same with S&F new top of 01 mm laminated sheet of approved shade over and including particle board 12 mm thick and with 1st class Seasoned teak wood of beading 6 mm thick all around including polishing to beading (two or more coats over a coat of wood filter etc) made to shape fixed in position pasted with 01 mm thick laminated sheet on top all as shown on drawing . Specified and directed by Eng in Charge. Make: Greenply/Century/Bhutan Board/Durian

Removing and replacement of old existing broken glass of table dressing Gents of any description in any position and replacement of the same with superior qulaity glass ) made to shape fixed in position pasted all as shown on drawing . Specified and directed by Eng in Charge.

SAFE MEAT & MILK WITH MARBLE TOP (FD-369) Removing & replacement of old u/s wire mesh of safe meat & milk with new one as per drg & directed by Engr in charge

Removing of old u/s door handle of safe meat & milk . S&F new door handle as per drg and directed by Engr in Charge

All as per item safe meat & Milk with marble top above but hasp & staples

Removing of old u/s marble top of safe meat & milk . S&F new marbble top as per drg and directed by Engr in Charge

M&L for preparation of wooden surface of safe meat & milk by scrubbing with grit paper to smooth the surface and applying two coat of white paint of required shade complete all as directed by the Engr -in- charge

RACK WEAPON FOR 20 RIFILES M&L two or more coats of smoke grey/ OG paint over a coat of wood filter etc) made to shape fixed in positions shown on drawing Specified and directed by Eng in Charge.

Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 8,614.00 and any other reduction if any from quoted amount.

VEE KAY IND (BID ID -3421910)

R K BUILDERS (BID ID -3427440)

sharma trader (BID ID -3418243)