Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.1 LAccepted-AOC KHAWASNIWAS NEAR POLICE QTRDEORALI GANGTOK SIKKIM | L1 | Accepted-AOC Being L1. | |
| 2 | L2₹22.5 L+₹2.4 L (12.2%)Rejected-Finance | L2 | Rejected-Finance Higher bid value. | |
| 3 | L3₹22.8 L+₹2.7 L (13.6%)Rejected-Finance | L3 | Rejected-Finance Higher bid value. | |
| 4 | L4₹22.9 L+₹2.9 L (14.3%)Rejected-Finance | L4 | Rejected-Finance Higher bid value. | |
| 5 | L5₹23.1 L+₹3.0 L (14.9%)Rejected-Finance | L5 | Rejected-Finance Higher bid value. |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
28 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Gangtok
GE Gangtok New Mil Stn Gangtok, Sikkim PIN-737102
REPAIR MAINT OF WATER SUPPLY AT SOURCE AREA UNDER GE GANGTOK
2022_MES_560746_3
8045AE8
Open Tender
Civil Works - Water Works
Works
182 days
GE Gangtok New Mil Stn Gangtok
As per tender documents.
8 documents required · 8 mandatory
₹500
GE Gangtok
₹40,000
Yes
3 Feb 2023
16 Jan 2023
30 Jan 2023
16 Jan 2023
28 Jan 2023
19 Jan 2023
Amount
Note for BOQ item No 1 to 17 :- Bidders are advised to visit the site of work before quoting to assess the topography of area, climatic condition lead and quantum of head load involved. The entire pipe line length of 22 KM requiring petty repair at places, collects water from natural source No 330, 194,234,142, 146 & 110 at high altitude and runs through hilly area dense forest, heavy rainfall, land slides etc. Distance of pipe line from motorable road is approximate 200m to 2 KM with steep slope facilitated with narrow track (Pagdandi) and no track (pagdandi) at places.
Dismantling and taking out old unserviceable rusted GI water mains with fitting 150mm dia in petty repair wherever required to existing pipeline from source to New Mil Stn for replacement and removal complete all as directed by Engineer In Charge
Supply, lay and connect to existing pipeline, HDPE pipe of size 160 mm dia OD, PN-6, PE-100 ,mild steel metal flanges on both side with necessary fittings complete with gasket, bolt, nuts and washers all as specified and directed.
Supply and fix in repairs sluice valve PN-6 IS-14846 with stainless steel spindle with CI hand wheel 250mm, cast iron body suitable for connecting 250mm bore pipe with suitable flanges both sides of the sluice valve complete with new gasket, bolt, nut and washer on both sides all as directed by Engr-in-Charge.
Supply and fix in repairs sluice valve PN-6, IS-14846 with stain less steel spindle with CI hand wheel 150mm cast iron body suitable for connecting 150mm bore pipe with suitable flanges both sides of the sluice valve complete with new gasket, bolt, nut washer on both sides all as directed by Engr-in-Charge.
S&F cross arms, bracing supports clamps and back plates fabricated from structural mild steel sections including nuts, bolts, washers welding bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of synthetic enamel paint complete all as specified and directed by the Engr-in-Charge.
M&L for mild sheet TMT bars, 10mm dia and over cut to length, bent to shape required including cranking bending spirally hooping for columns hookings ends 500D and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Material and labour for mild steel TMT bars 6mm dia and over upto including 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends 500D and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & as directed.
Excavation in trenches in soft/loose soil not exceeding 1.5m wide and not exceeding 1.5m depth and getting out complete all as specified and directed by Engr-in-Charge.
Returning, filling in, including spreading levelling watering and well ramming in layers not exceeding 25 cms in depth in soils complete all as specified and as directed by the Engr-in-Charge.
Removing excavated material/soil to a distance not exceeding 50m and depositing where directed at level not exceeding 1.5m above starting point complete all as specified and as directed by the Engr-in-Charge.
M&L for RCC (nominal mix) type B1 (1:2:4) (20mm graded aggregate) as in Foundations including rafts, footings,foundation beams,plinth beams,bases for columns etc basement slabs under-reamed piles and mass concrete complete all as specified and as directed.
M&L for RCC (nominal mix) type B1 (1:2:4) (20mm graded aggregate) Walls, retaining walls, basements walls, ballast walls and the like; any thickness; above top of footings including attached pilaster and buttresses complete all as specified and as directed.
M&L for RCC (nominal mix) 1:2:4 type B1 (using 20mm graded aggregate) Columns, pillars, piers, posts and struts complete all as specified and as directed.
M&L for PCC 1:3:6 type C2, (using 40mm graded stone aggregate) as in supporting pillar/blockresting for GI pipe including necessary formwork as required complete all as specified and as directed.
M&L for Formwork to sides of concrete foundations, plinth beams for rough finished surface of concrete, complete all as specified and as directed.
M&L for Formwork to faces of walls ,retaining walls ,abutments,parapets ,staircase railings and similar work attached pillasters,buttresses etc vertical or to batter including rough finished surface complete all as specified and as directed.
M&L for formwork to sides of pillars , posts, strut,piers, columns and stanchion for rough finished surfaces of concrete complete all as specified and as directed..
KAMLESH ENTERPRISE
BIJAY MITTAL
KARMA SHERPA
M/S ANIL KUMAR THAKUR
NISHA CONSTRUCTIONS
DHARMINDER SINGH
MAHENDRA KHAWAS
KARMA TSETEN BHUTIA
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .