Procurement of material for Day to Day maintenance, repair,rewiring and Improvement of EI and Fans at House Tax Building, Sector 09 R. K. Puram in ward no. 65S under South Zone.

Amount

PART A Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required. Group C

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. 3 x 2.5 sq. mm

6 x 2.5 sq. mm

3 x 4 sq. mm

6 x 4 sq. mm

3 x 6 sq. mm

6 x 6 sqmm

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

4 X 6 sq. mm + 2 X 6 sq. mm earth wire

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supply of 12'' ( 300 mm )sweep 1400 RPM exhaust fan heavy duty complete with shutter,blade etc as required.

Installation of exhaust fan in the existing opening ,including making good the damage, connection, testing ,commissioning etc.as required Up to 450 mm sweep

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole(a) Single Pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.(a) 63 A

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (a) 63A

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.100 A, 16 kA,TPMCCB

SITC LED tube type luminaire 20 Watt rating complete with Polycarbonate housing Batten integrated integrated electronic driver prewired with high efficient LEDs with the following. A) Total system wattage 20 watt +/- 5 % b) Luminous efficacy lumens /watt = 95 c) Power factor = .95

Supply of XLPE insulated and PVC sheathed Al conductor armoured cable confirming to IS: 7098 Part 1/1988 as required. 4x10 sqmm

Supply of XLPE insulated and PVC sheathed Al conductor armoured cable confirming to IS: 7098 Part 1/1988 as required. 4x16 sqmm

Supply of XLPE insulated and PVC sheathed Al conductor armoured cable confirming to IS: 7098 Part 1/1988 as required. 2x6 sqmm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing masonry open duct as required Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing brass batten/ angle holder including connections etc as reqd

Supply of 9 watt LED retrofit lamp suitable for B 22 holder

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way, Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way, Double door

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (a)5/6 A switch

(b) 15/16 A switch

( c ) 3 pin 5/6 A socket outlet

(d)6 pin 15/16 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required (a) 4 Module (125 mmX75 mm)

8 Module (125 mmX125 mm)

12 Module (200 mmX150 mm)

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nutbolt & spring washer spaced at 50mm)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm

S/I/T/C of surface mounted CRCA housing 36 W LED luminaire with acrylic cover diffuser with following specifications including fixing in existing wall/surface with connections as required (a) total system wattage = 36 watt+/- 5% (b) Luminous efficacy > 95 lumens /watt ( c) power factor.=0.95

SITC of Wall mounted Fan 400 mm sweep rated voltage 220-230 AC rated frequency 50 Hz speed 1280-1350 rpm with desire colour

Supplying,lowering and fixing of GI pipe medium (M-Class) i/c cutting threading on both sides etc. ISI marked etc as required 50 mm dia (Nominal Bore)

S&F following size of G.I.Socket as required.50mm

S&F following size of G.I.Union as required.50mm

S&F following size of G.I.Elbow as required.50mm

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm dia

P&F following sizes of PVC insulated & PVC sheathed copper conductor 3 core submersible cable conforming to IS 694/1990 etc as required.3x10 sqmm

Supply,installation,testing and commissioning of cubical type control panel board for single phase & three phase submersible pumping set of following rating complete with contactor,relay,MCB,Condenser, voltmeter, ammeter and indication lamp etc including connctions etc as required.10 HP ( Three Phase)

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

PART B Supply of 1.5.sq .mm ISI mark ,FRLS PVC insulated, single core copper conductor cable.

Supply of 2.5.sq .mm ISI mark ,FRLS PVC insulated, single core copper conductor cable.

Supply of 4.0 sq .mm ISI mark ,FRLS PVC insulated, single core copper conductor cable.

Supply of 6.0 sq .mm ISI mark ,FRLS PVC insulated, single core copper conductor cable.

Supplying of 6 A to 32 A ratings, SP MCB, “C” curve, 10 kA breaking capacity.

Supply of 20 mm dia. ISI marked ,PVC conduit

Supply of S.P. 5/6 amps, one way switch, piano type ISI marked

Supply of S.P. 15/16 A, one way switch, piano type ISI marked

Supply of 3 pin 5/6 amps socket outlet, piano type ISI marked

Supply of 6 pin 15/16 & 5/6 amps socket outlet, piano type ISI marked

Supply of S.P. 5/6 A, one way modular switch, ISI marked

Supply of S.P. 5/6 A, two way modular switch, ISI marked

Supply of S.P. 15/16 A, one way modular switch, ISI marked

Supply of 3 pin 5/6 A modular socket outlet, ISI marked

Supply of 40 A, 2 pole isolator.

Supply of 63 A, 2 pole isolator.

Supply of 63 A, 4 pole isolator.

Supply of Sheet Steel DP MCB Enclosure

Supply of 6 way, SPN, double door, MCB DB

Supply of 8 way, SPN, double door, MCB DB

Supply of 12 way, SPN, double door, MCB DB

Supply of LED Tubelight lamp T-5/T-8 20 Watt rating made up of high efficient LEDs with the following specifications:(a) Total system wattage 20 watt +/- 5% (b )Luminous efficacy lumens/watt >=95 (c)Power Factor >=0.95

Supply of universal aluminium batten 4ft long Pre coated CRCA sheet steel, End caps suitable for T5 and T8 LED tubelights etc as required.

Supply of PVC batten /angle holder

Supply of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supply of Al. Alloy/ cadmium plated iron screws, 20 mm

Supply of GI saddles 25mm x 0.90mm for conduit above 25mm

Supply of PVC clip for fixing cable

Synthetic enamel paint in all shades except black or chocolate shade

Supply of Soft brush

Supply of Red oxide Zinc chromate primer

Supply of wire brush

Supply of Hessian cloth

Supply of 20 mm PVC bends

Supply of 20 mm PVC junction box, one way

Supply of 20 mm PVC junction box, two way

Supply of 20 mm PVC couplers