SPECIAL REPAIR TO DRAINAGE/SEWAGE LINE AT FOOD COURT SPECIAL REPAIRS TO ROADS AND ALLIED WORKS FROM ARCHANA GATE TILL MULLA GATE TO L AND M BUILDING SPECIAL REPAIR TO ROAD CONNECTED J BLOCK AND BHARNI BLDG AT NOFRA COLABA MUMBAI 3rd CALL

Amount

Surface excavation n.exc 30cm deep and avg 30cm deep and getting out in soft/disintegrated rock complete all as specified and directed.

Scarifying or picking gravelled, macadam or biruminous macadam surfaces in area n exc 400 sqm of thickness exc 50mm and n exc 100mm deep including removal from site and deposited out of MD land complete all as specified and directed.

Rolling and consolidating formation surface in cutting by power roller 8 & 12 tone roller complete all as specified and directed.

M&L for Soling with borken boulders Grade 1 (90 to 63mm) or quarried stone, interstices filled, surface formed, rolled and consolidated to required gradient and camber 150 mm spread thickness complete all as specified and directed.

M&L for 150mm compacted thickness WBM laid in two layers 75mm each with stone aggregate of grading 2 (63 to 40mm size) or grading 3 (50 to 20 mm spread rolled and consolidated to gradient and camber required with granite, trap or basalt complete all as specified and directed .

M&L for 75mm compacted thickness WBM laid in one layer with stone aggregate of grading 2 (63 to 40mm size) or grading 2 (63 to 40 mm spread rolled and consolidated to gradient and camber required with granite, trap or basalt complete all as specified and directed .

M&L for Preparing surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags or by using mechanical blower to remove all loose dirt on unsurfaced water bound macadam complete all as specified and directed.

M&L for applying evenly a priming/tack coat with bitumen primer using paving bitumen @ 10Kg/X Sqm of road surface by sprayer operated hot pressure mechanism complete all as specified and directed .

M& L 40 mm thick consolidated thickness of semi dense bituminous premixed carpet with 6 % of binder content by weight of total mix by using mechanical paver, rolled and compacted to required camber and gradient with 8 to 10 tonne power roller to a uniform smooth surface etc complete all as specified.

M&L for premix bituminous macadam of laid/rolled and compacted to required gradient and thickness and chamber (binder content shall be 4%) (consolidated thickness 75mm or in repair work incl scraping of old loose material and removing from site

Preparing existing black top surfaces by brushing with wire brushes for removed caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt complete all as specified and directed.

Applying evenly a priming/tack coat with bitumenous primer at 5 Kg per 10Sqm (Paving bitumen) complete all as specified and directed.

M&L Bitumen premixed semi-dense asphaltic concrete 40 mm consolidated thickness with 5.5% binder (paving bitumen) content by weight of total mix. Rolled and compacted to required camber & gradient complete all as specified and directed.

Repair to potholes any depth, not exceeding 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc, cutting around edges to at least 25mm in depth, making good by applying tack coat with bituminious primer @ 5kg per 10 sqm,putting in premix as specified for thin bituminious carpet(3cm thick) well rammed and sealed with premixed sand seal coat ( 6.8 kg of binder with 0.06 cum of sand)well rammed to a depth of potholes n.exc 30mm complete all as specified and directed.

Taking down retro reflective raised pavement markers (Cat eye) complete all as specified and directed.

S&F for retro reflective raised pavement markers (cat eye) double sided lense reflector white/red/yellow polycarbonate / ABS plastic body including epoxy adhesive & drilling etc.complete all as specified and directed and including necessary fixing hardware of standard size, shape/colour, body & lens as apporved by GE. Make :Automat Road safety Pvt Ltd / Futurvista/ Shakti / Grams (India) implex

S&F for Solar cat eye/road stud having 3 LEDs of Colours Red/Amber/Green to each side( Total 06 Nos) housed in a tough pressure die casted aluminium alloy of size 125X125x25mm with built in stem of suitable length to be fixed with epoxy and having High capacity Ni-Cd Rechargeable Battery with a backup of upto 12 hours, well protected in side under tough unbreakable transparent sheet complete all as specified and directed. Make-Dark Eye, Cat Part No.DA-110(Dhruv) / Shakti or equivalent in Tata BP as approved by GE

M&L for painting 2mm thick thermoplast fluroscent paint incl 20% glass beads with commercial stripping machine including preparation of surface as per manufacturer's instruction making lines/dashes, arrows etc, on roads, pavements, runways and other like surfaces not exc 10cm in width or girth, colour white or golden yellow or any other shade complete all as specified and directed.

Material & labour for precast concrete (type B1 1:2:4 using 20mm graded stone aggregate) as in kerb stones, copings of any section with plain fair faces chamfering, throating etc and setting in mortar 1:6 complete with joints to match

M&L for Hardcore of guage n exc 63mm, deposited, spread and levelled in layers n exc 15 cm thick, water and rammed to a true surface complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D2 Using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

Demolition of stone slab and tiles laid bedded and pointed in cement mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

Providing and fixing, Digital durastone tiles of 300x300mm size and 20mm thick over screed bed or bedding layer of cement mortar 1:6 for laying floor finishes, footpath, shape and design of tile will be approved by GE complete all as specified and directed.

Excavation in trenches , n exc 1.5m deep n n exc 1.5 m wide for foundation in soft / disintegarated rock complete all as specified and directed .

M & L for PCC 1:4:8 type D2 ( 40 mm graded aggregates) as in foundation filling and mass concrete complete all as specified and directed.

M&L for RCC 1:2:4 using 20mm graded stone aggregate as in Columns complete all as specified and directed.

M&L for RCC 1:2:4 using 20mm graded stone aggregate as in fdn/ footing complete all as specified and directed.

M & L for TMT bar 10mm dia and above, cut to length, bent to shape required cranking, bending spirraly for hooping for columns , hooking ends incl mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No. 28 herein before but TMT 8mm dia in stirrups

Formwork to sides of pillars , posts, struts, piers, columns complete all as specified and directed.

M&L for Brick work with sub class B bricks old size in CM 1:6 staright or curved on plan exc 6m mean radius complete all as specified and directed.

M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thik wall, built in CM 1:4 all as specified and directed.

M&L for 18mm thick Granite (of any type) work table rubbed or polished in steps, jambs and like cement mortar 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite complete all as specified and directed.

Returning filling in incl spreading , levelling, watering and well ramming n exc 25 cm complete all as specified and directed

M & L for PCC type B-2, 1:2:4 100 mm thk using 40 mm graded aggregates as in Floors & pavings complete all as specified and directed

S & F in reinforced concrete pipes, class NP2, 300 mm dia laid and jointed complete with collarscomplete all as specified and directed (Note - The rates include for laying pipes level or to falls in trenches, etc. on concrete bed or directly on hard ground as indicated and making joints and testing as specified.The rates include for all necessary extra joints, waste, and cutting etc. Excavation and earthwork shall be measured seperately.)

All as per item No 36 herein before but 450mm dia pipe

M & Lfor PCC in 1:3:6 type C-2 300 MM dia using 40 mm graded aggregate Concrete bed to drain pipes including packing under and for hauching & Benching against the sides of pipes after they are laid and tested complete all as specified and directed. (Note :- (i) Thickness of bed below the barrel of pipes: 15cm for pipes 200mm dia and over. (ii) Width of bed: Outer diameter of drain pipes (not of sockets/collars) plus 30 cm (iii) The rates include for any necessary shuttering and supports to concrete and for laying beds to falls.

All as per item No 38 herein before but 200 MM dia pipes

M & L for Plastering 15mm thick on brick work or concrete surface in cement mortar 1:3 with using WPC as approved, finishing even and smooth without using extra cement including necessary scaffolding, ladder, formork ; etc complete all as specified and as directed. (WPC shall be measured and paid seperately)

M & L for Plastering 20mm thick on brick work or concrete surface in cement mortar 1:3 with using WPC as approved, finishing even and smooth without using extra cement including necessary scaffolding, ladder, formork ; etc complete all as specified and as directed. ( Note:- WPC shall be measured and paid seperately)

S & F in MS plate (CHEQUERRED) 5mm and over as in manhole cover fixed to angle iron frame with three Nos of hingeg and 150mm handle complete all as specified and directed.

S&F in framed work such as grills,gratings, Mild steel in flat, round or square bars or any section incl ornamental/intricate design sections as required etc., with ends of bars shouldered and/or riveted, or forged into spikes; incl pintal hinges, hand made sliding bolts etc and similar work conforming to Fe 290 Gde-E-165 as in steel gate complete all as specified and directed.

M & L for preparation of new Steel surface with synthetic enamel paint of two coats in any description over 10cm in width or grith, not otherwise described, over a coat of Red oxide, zinc chrome complete all as specified and directed

M&L for Plain cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate as in coping of masonry wall including weathering slightly rounded or chamfered angles and throating as directed including necessary formwork complete all as specified and directed.

Removing excavated material outside MD land exc. 1.50 km and depositing complete all as specified and directed.

M&L for precast cement concrete solid blocks or slabs (1:2:4 type B1) 10 cm thick (with plain or interlocking joints) setting in cement mortar 1:4 complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and conforming to Fe 410-W (Grade E-250) quality ‘A’ all as specified and directed.

M&L for Rendering in cement mortar 1:6, 15mm thick on fair faces of brick work and finised even and smooth without using extra cement including taking down the existing plaster complete all as specified and directed.

M & L for preparation of new plastered surfaces and apply one coat of acrylic exterior primer and two coats of acrylic emulsion exterior grade 100 % anti-fungal paint complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss complete all as specified and directed.

S & F in 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors as a weep hole in brick masonary complete all as specified and directed.

Excavating in trenches,in hard soil (including top layer of bitumen/ road surface) n exc 1.5 m width n exc 1.5 m depth in hard/dense soil and getting out complete all as specified and directed.

All as per item No 53 herein before but exceeding 1.5 m depth

S & F for providing, lowering and laying HDPE DWCPE (SN8) pipes as per IS : 16098 of 2013, 200 mm bore, laid and jointed with and including elastomeric sealing 'O' ring as per manufacturer's instructions complete all as per specified and directed. (Note 1- The rates include for laying pipes level or to falls in trenches, etc. on concrete bed or directly on hard ground as indicated and making joints and testing as specified.The rates include for all necessary extra joints, waste, and cutting etc.) ( Note 2: Layout of sewage line with level sheet shall be submitted by the contractor before execution of work. The work will be commenced only after approval of layout & levelling complete all as specified and directed.

S & F for providing, lowering and laying HDPE DWCPE (SN8) pipes as per IS : 16098 of 2013, 300 mm bore, laid and jointed with and including elastomeric sealing 'O' ring as per manufacturer's instructions complete all as per specified and directed. (Note 1: The rates include for laying pipes level or to falls in trenches, etc. on concrete bed or directly on hard ground as indicated and making joints and testing as specified.The rates include for all necessary extra joints, waste, and cutting etc.) (Note 2 : Layout of sewage line with level sheet shall be submitted by the contractor before execution of work. The work will be commenced only after approval of layout & levelling complete all as specified and directed.

M & L for rendeing 20mm thick in CM 1:4 on fair faces of brick work or concrete surfaces in two coats 15mm thick and 5 mm thick each coat mixed with integral water proofing compound at the rate of 3% of cement or as per manufacturers instructions (Note: Integral water proofing compound shall be measured & paid separately)

Supply only integral water proofing compound conforming to IS-2045 complete all as specified and directed.

M&L for Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles complete all as specified and directed.

M&L for Providing precast cement concrete type B1 1:2:4 (20mm graded aggregate) in landings,cover slabs (for manholes etc) chullah hoods,chajjas,water troughs,mangers,shelves and similar articles with plain faces including necessary form work complete all as specified and directed. Note : Reinforcement shall be measured and paid seperately

M & L for 80 mm thick interlocking paver block machine pressed of any size and shape as approved by GE over and including 50mm sand cushion & demolition of old paver blocks and removal to store complete all as specified and directed.

Chequered cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors laid over 15mm thick screed in CM 1:6, including dismantlig complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in surface channels, drains etc finished even and smooth without using extra cement

M&L for PCC 1:3:6 type C 1 using 20 mm graded aggregate block masonry with solid block, exc 10 cm in width and setting in mortar complete for coping of pole including necessary from work and fair finish to the exposed surface area without using extra cement complete all as specified and directed.

Taking up old unserviceable XLPE insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor including old concrete cable cover from trenches/ walls/ ceilling/poles etc any size all as specified and directed.

Supply and laying High density poly-ethylene pipes (HDPE) of pressure 6 kgf/cm2 pipe, 40mm dia for laying of cable protection complete to walls/ trenches/floor/ceilings all as specified

S & F laying PVC insulated XLPE, armoured LT cable, 1100 Volts grade with aluminium conductor of size 3.5 core 25 Sqmm laid in trenches/ through pipe/ ducts or fixed on wall etc complete all as specified and directed . Make- Polycab/Asian (RPG)/CCI/Gloster

Supply, laying, commissiong & testing XLPE insulated armoured LT cable, 1100 Volts grade with aluminium conductor of size 3.5 core 10 Sqmm laid in trenches/ through pipe/ ducts or fixed on wall etccomplete all as specified anddirected . Make- Polycab/Asian (RPG)/CCI/Gloster

Supply and fix in repair FRP type looping box of size 280x170x1300 mm including necessary arrangement to fix the looping box with the suitable size of cable glands with entry, nuts,bolts, washers flat iron etc comprising of the followings:- Make of looping Box- Hensel or equivalent . Make of MCB's- Schneider / L&T/ GE (a) MCB,63 Amps, TP (10 KA) (C series) - 01 No. (b) MCB 5 to 30 Amps, SP (10KA) (C series)-01 No (c) Neutral link - 01 No

Dismentling connections & Taking out broken, damaged / rusted street light poles of any kind / make complete alongwith light fittings & refixing the same (after minor repair works) to new street light poles duly necessary excavation, breaking PCC, returning/ filling and removing surplus soil out of MD land complete all as specified and directed.

Supply and fixing Steel tubular swaged street light poles complete with cast iron base plate ,finial taper plug,bolts,nuts and screws as specified type 410 SP-31 9.0 mtr long and painting with two coat of aluminium paint over one coat of primer on exposed surface of pole including fixing 3 core 2.5 sqmm PVC copper conductor cable in connection from FRP looping box to light fitting connector all as specified and directed. ( NOTE-Excavation & PCC will be measured and paid separately) Make :- National/Bombay Poles.

Supply and fix premium poles with base plate and all associated items made out of MS pipe (finished with P.U. painted shade) of 301 Cm height and window at the bottom for space for MCB and terminal block for fixing LED post top integral mounted decorative LED light post 24 Watt with IP65 protection suitable for 40/25/20 mm dia GI bend to desired shape as directd by Engineer-in-Charge. (Note- Excavation and PCC will be measured and paid seperately). Make- Make of pole GUANA in Phillips & make of light UNIClassic in philips or equivalent make in Havells or Jaquar.

Garima Construction Co

SHREE JAGDISH FURNITURE CO.