Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.2 LAccepted-AOC | L1 | Accepted-AOC aoc | |
| 2 | L2₹13.2 L+₹1.0 L (8.48%)Rejected-Finance | L2 | Rejected-Finance 2nd lowest bid | |
| 3 | L3₹14.2 L+₹2.0 L (16.5%)Rejected-Finance | L3 | Rejected-Finance 3rd lowest bid |
Tender Value
₹13.3 L
EMD Value
₹27,000
Closing Date
26 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SAUGOR
GE SAUGOR
PROVN OF TOILETS AT MRC, 536 ASC BN AND CABINETS AT MDC UNDER GE SAUGOR
2022_MES_555923_1
GE/SGR/TOK-48 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
SAUGOR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER SAGAR
₹27,000
Yes
7 Nov 2022
4 Oct 2022
28 Oct 2022
4 Oct 2022
26 Oct 2022
18 Oct 2022
Amount
Excavation over areas not exc 1.5m deep and getting out in soft/ loose soil complete all as specified and directed.
Excavation in trenches not exc 1.5 m wide and not exc 1.5 m deep in any type of soil for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sqm on plan and getting out complete all as specified and directed.
M&L for moorum/red bajri filling in trenches or paving laid in layers not exceeding 25 cm thick spread, levelled and rammed including watering complete all as specified and directed.
Removing excavated materials (soil) to a distance exc. 1.50 km and deposting where directed, at a level n.exc. 1.5m above the starting point complete all as specified.
Returning filling in, incl spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified.
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in mass concrete as in foundation filling and mass concrete complete all as specifed and directed.
M&L for RCC M-25 (Design Mix) (using 20mm graded stone aggregates) as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc basement slabs, under reamed plies and mass concrete, complete all as specified and directed
M&L for RCC M-25 (Design Mix) (using 20mm graded stone aggregates) as in columns, pillars, piers, posts and struts and the like, complete all as specified and directed.
M&L for RCC M-25 (Design Mix) (using 20mm graded stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5m span and the like, complete all as specified and directed.
M&L for RCC M-25 (Design Mix) (using 20mm graded stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like and the like, complete all as specified and directed.
M&L for mild steel "TMT" bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending sprially for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed..
M&L for mild steel "TMT" bars 6mm to 8 mm dia reinforcement, cut to length, bent to shape required including cranking, bending sprially for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed..
All as per Srl item 12 above but for 5mm dia and over upto 10 mm dia and including 10mm dia in stirrups, spacers and binders.
M&L for form work to sides & soffits of plinth beam and sides of footings getting for fair finished surfaces of concrete complete all as specified and directed.
M&L for form work to sides of columns as in fair finished surfaces of concrete complete all as specified and directed
M&L for formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. for fair finished surfaces of concrete flat complete all as specified and directed
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; n exc. 200m thick (horizontal or sloping) Fair finished surfaces of concrete flat complete all as specified and directed
M&L for formwork to edges of concrete flats, breaks in floor, openings in concrete walls, floors and roofs exc 10 cm but n.exc 20 cm width for fair finished surfaces complete all as specified and directed..
M&L for brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as per specified and directed.
M&L for brick work with sub class 'B' brick (old size), in cement mortar 1:4, straight or curved on plan to any radius in half brick thick wall complete all as specified & directed.
M&L for 100mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregates) as sub bases of floors and finished the surface even and rough to receive the topping layer complete all as specified and directed.
M&L for 25 mm thick cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregates) as in levelling course of sub base finished even and rough to receive the topping layer complete all as specified and directed.
M&L for 75mm thick PCC 1:2:4, type B-1 using 20mm graded stone aggregates) as in plinth protection surface finished even & smooth using extra cement providing with construction joints 10x20 mm filled with bitumen and sand mortar 1:3 complete all as specified and directed.
M&L for non-skid coloured ceramic tiles 7 to 8 mm thick area of each tile exc 0.11 Sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match coiour/shade laid over and including 15mm thick screed bed layer in CM 1:6 complete all as specified and directed.
M&L for glazed ceramic joint free coloured tiles on vertical surfaces size 450mmx30mm0x7mm thick laid over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade /colour of tiles complete all as specified & directed.
S&F for solid PVC frame (single rebated) of size 50mm x 47 made out of wood grain printed PVC sheet reinforced with MS Square tube complete all as specified and directed.
S&F factory made soild PVC moulded door shutter, 28mm to 30 mm thick (stiles) with wood free EPS with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified and directed.
S&F steel ventilators with top hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel complete all as specified and directed.
S&F 3mm thick sheet glass ordinary quality frosted on side fixed wdn beads / oil putty in square not ex 0.50 sqm in each pane complete all as specified and directed.
S&F aluminum, anodized, barrel tower bolts of extruded section 200 mm long complete all as specified and directed.
S&F extruded aluminum alloy handle, fabricated type, anodized 125 mm size complete all as specified and directed.
S&F mild steel butt hinges 'medium weight', cold rolled mild steel 100 mm size complete all as specified and directed.
S&F 15mm bore Galvanised Mild steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F 20mm bore Galvanised Mild steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed..
S&F 20mm ball valves, high pressure of PTMT with high density plastic bass screwed for iron pipe and fixed (min wt 20mm - 210 gms) complete all as specified and directed.
S&F 20mm dia Gun metal, Globe or gate valves, with iron head or lever screwed both ends for iron pipe fixed complete all as specified and directed.
S&F vitreous china WHB white flat back size 550mm x 400mm with and including MS brackets, CP pillar tap fancy type - 01 No of 15mm bore, CP waste coupling 32mm dia, 32mm dia PVC waste pipe of suitable length and PVC connections 15 mm size with PTMT nuts of length 450 mm high pressure complete all as specified & directed.
S&F vitreous china squatting pan “ORISSA” pattern size 580mm x 440mm, white with P or S trap front or back inlet with integral foot rest (excluding flushing cistern & flush pipe) and including connection to trap and to flushing pipe anti-syphonage pipe, etc including making good to floor complete all as specified and directed.
S&F PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend complete all as specified and directed.
S&FCP bib taps, cast copper alloy, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.
S&F in repairs angle valve /stop valve15 mm bore dia, cast copper alloy, fancy type chromium plated, screwd down, high pressure, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed.
S&F concealed stop valve 15mm bore dia, cast copper alloy, CP fancy type with long shank and cup screwd down, high pressure, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed.
S&F brass chromium plated shower rose fancy type, 125 mm size with swivel joints, including fixing to steel pipe or union complete all as specified and directed.
S&F PVC connections 15mm bore size 450 in length with both end brass/pvc high quality nuts complete all as specified & directed.
S&F vitreous China urinals, half stall type (flat back), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.
S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified
S&F 110mm bore PVC (SWR) pipes single soketed in any length with rubber ring jointed and fixed to walls with suitable size mild steel clamps complete all as specified.
S&F 75mm bore PVC (SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes single soketed in any length with rubber ring jointed fixed to wall with suitable size mild steel clamps complete all as specified and directed.
S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.
S&F PVC (SWR) bends 75 mm dia complete all as specified and directed.
S&F PVC (SWR) bends 75 mm dia with accessable door complete all as specified and directed.
S&F PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal with acess door complete all as specified and directed. .
S&F PVC (SWR) 75 mm dia junction, single(single 'T') equal or unequal complete all as specified and directed. .
S&F 75mm dia PVC (SWR) multi floor trap with Hinge type SS grating including jointing with solvent cement complete all as specified and directed.
M&L for 15mm thick cement plaster in CM 1:4 on even surface of brick wall mixed with 3% WPC finished even and smooth without using extra cement, complete all as specified and as directed. (Note:- Water proofing compound shall be measured and paid separately under respective items).
M&L for 15mm thick rendering in cement mortar 1:6 in other than fair faces of brick work finished even & smooth without using extra cement complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed
M&L for rendering 5 mm thick cement plaster in CM 1:3 on concrete surfaces as in ceiling finished even and smooth (without using extra cement) complete all as specified and directed
M&L for prepration of newly plastered wall sufaces & applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer incl of walls complete all as specified and directed . Make:- Asian ACE or equivalent make as approved by GE
M&L for preparation of newly plastered surfaces of wall and applying 2mm thick Birla / J K wall care white putty on walls and applying two coat of Interior Acrylic emulsion over a coat of alkali resistant primer complete (internal wall) complete all as specified and directed.
M&L for applying three coats of white wash on newly plastered ceiling surfaces including preparation of these surfaces complete all as specified and directed.
M&L for cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregates) as in drains, coping, benching in man holes or similar work etc, complete all as specified and directed.
M&L for precast cement concrete type B1, 1:2:4 (using 20mm graded stone aggregates) cover slabs and lintels etc, complete all as specified and directed.
M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks capacity 500 litres (cylindrical vertical with closed top) three layered wall construction hoisted and fixed in position complete all as specified and directed.
S&F 150mm dia Reinforced concrete pipes, Class NP2, laid and jointed complete with collars complete all as specified
M&L for concrete bed to drain pipes of 150 mm dia using PCC 1:4:8, type D2 (using 40mm graded stone aggregates) including packing under, and haunching against the sides of pipes after they are laid and tested in complete all as specified and directed.
M&L for 18mm to 20mm thick pre-polished Granite slab, machine cut, for floors/ shelves,cooking platforms , urinal partations, window cill, steps, jambs and pillor top laid over 15mm thck CM 1:4 cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of Granite stone complete all as specified and directed
M&L for rounding, chamfer, splays or arris and smooth finishing at the edges of stone as in steps, cooking platform and other similar locations complete all as specified and directed.
S&F pre-coated coloured galvalume Aluminum Zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ150) as in roof covering/ clading to wall, including crimping sheet at end fixed with self tapping screws complete all as specified and directed.
S&F 0.50 mm thick galvalume sheet pre-coated coloured for ridge or fixing for closing gable truss suitable for profile pattern sheet fixed with self driving screws complete all as specified & directed.
S&F structural steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.
S&F MS plates (plain or chequered) channels square cut to or notched forming holes with riveted bolted or welded attachment for Fe-410W complete all as specified and directed.
S&F mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 22.5cm & not exc 30cm long dia of shank 16 to 20 mm complete all as specified and directed.
M&L for concealed point wiring for the following with 1.5 Sqmm PVC-FR insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and directed:-
For one light, fan point controlled by one switch
For one 3 pin ,5 Amp socket point with other switch on the same board
S&F modular switch, one way, 6 Amp 230, 1 module complete all as specified and directed
S&F socket modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed
S&F ceiling rose, surface backlit,three terminal complete all as specified and directed
S&F modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed
S&F testing and commissioning of MCB SP 6 Amp to 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed
All as per Srl item No.83 above but SPN 40 Amps, 240 V
S&F double door metallic sheet metal enclosure for DB double door(IP-42/43) When MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete all as specified and directed
S&F LED TL fitting 20/18 watt for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brighness complete all as specified and directed. Make Havells Cat Part No LHEXBLP7PN1W020, 4 feet/Bajaj cat part No BCLSB 20 WH/ CG Cat par No LCTC-18-CDL
S&F LED Bulk head fitting 13/10 watt designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed. Make - Havells cat part No LHEXCGP7UN5W013/BAJAJ cat part No BIBWP10WLED /CG cat part No LBH-10-CDL.
S&F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep metallic body with all accessories including making hole in stone /brick wall grouting & making good in all aspects complete all as specified and directed. Make -Bajaj frehee 300/CG Trans Air 12"/Havells Ventil Air-DS
Supply and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 6 sqmm 2 core complete all as specified and directed
M&L for sand cushioning in trenches for the cable complete all as specified and directed
M&L for kiln burnt sub class 'B' bricks old size laid in trenches for cable protection complete all as specified and directed
S&F GI pipe light grade 40mm bore ISI marked on pole on wall or laid in trenches incl all fittings (nut, bolt, clamps & washers) complete all as specified and directed
M&L for GI tubing of size 25 mm bore, medium grade, ISI marked with all GI fittings (medium grade) incl laid in trenches , floor etc complete all as specified and directed .
S&F Gun metal Gate valve iron wheel head both end screwed of size 25 mm bore for iron pipe complete all as specified and directed.
S&F mild steel door shutter with MS angle iron shutters frame 40 mm X 40 mm X 5 mm in two panel covered with 1.25 mm thick MS plain black sheet welded to shutter with 2 Nos sliding door bolt of 16 mm dia 300 mm long with locking arrangement, 2 Nos of tower bolt of 200 mm long including MS angle iron frame 40mm x40mmx5mm as in chowkhat with 6 Nos hold fast of flat iron 30mm X5 mm ,200 mm long with bottom flat iron of size 30mmx5mm and 100 mm size 6 Nos butt hinges including necessary cutting, welding, binding as required with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and as directed.
Cutting existing GI tubing for alterations ,screwing existing tube size of 40 mm and 50 mm dia for new connection including earth work and clamp, neccessory fitting as per site required complete all as specified and directed.
A Raza Enterprises
M K Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .