Construction of Infrastructure for accommodation of Additional Security Personnel at Dzuko Valley Police Outpost, Senapati District

Amount

SH :Construction of Sentry Tower Block -A

SH : EARTH WORK

Excavation in Hill Area in Soil by Mechanical Means (Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres)

Earth work in excavation by mechanical means ( Hydraulic excavator)/ manual means over area ( Exceeding 30cm in depth 1.5m in width as well as 10 sqm on plan ) including getting out and disposal ofexcavated earth , lead upto 50m and lift upto 1.5m as directed by the engineer in charge 2.6.1 All kind of soil

Filling available excavated earth (excluding rock) in trenches,plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m. Extra for additional lift of 1.5 m or part there of in . Ordinary or hard rock

Supplying and filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete

SH : CONCRETE WORKS

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cement :5 coarse sand :10graded stone aggrt. 40mm nominal size).

SH : R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrte excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams , suspended floors roofs having slop upto 15 degree landing balconies , shelves , chajjas lintels bands plain window sills staircases and spiral staircase above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in wall ( any thickness ) including attached pilaster , buttresses,plinth and string courses , fillets , columns , pillars , piers , abutments , post and struts etc above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including straightening, cutting bending,placing in position and binding all complete upto plinth level (a) Mild steel and medium \tensile steel bars

( b ) Tor steel bars.

FORM WORKS

Centering & shuttering including strutting , propping etc and removal of form for :(a) Foundation footings, bases of columns etc. and mass concrete.

(c) Columns, pillars, Piers , abutment , post and struts

(d) Lintel , beams , plinth beams , girder , bressumers ans cantilever with water proof ply 12mm thick

(b) Suspended floor , roof , landing, balconies ans access platform with water proof ply 12mm thick

(e) Edges of slab and breaks in floors and walls (i) Under 20cm wide

BRICKS WORKS

Brick work with 1st class common burnt clay FPS ( non modular) bricks in foundation and plinth in cement mortar 1: 4 (1 Cem:4C/Sand)

Brick work with 1st class common burnt clay FPS ( non modular ) in superstructure above plinth level upto floor V level in all shape and size in cement mortar 1:4(1 Cem:4C/Sand)

SH : STONE WORKS

Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 ( 1 Cement : 6 corase sand : 12 graded stone aggregate 20mm nominal size ) at plinth level with cement mortar 1:6 ( 1 cement : 6 c/sand )

WOOD WORKS

Providing beams i/c hoisting, fixing in position and applying wood preservative for the un exposed etc complete with (c) Local best quality Tolhao wood.

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

P/F expanded metal 20 x 60 mm strands 3.25 m wide and 1.6 mm thick for windows etc i/c 62x 19 mm beading of Iind class teak wood and priming coat with approved steel primer all complete

Providing & fixing 3 mm thick M.S. sheet door shutter and gat shutter with chaukat frame of 60 X 60 X 5 mm, door frame 50 X 50 X 5 mm bracing and lodging rod, hold fast etc. of 40 X 40 X 5 mm with locking arrangement, hooks and handles with sliding bolts and including the cost of priming coat.

Steel welded in built up sections, framed work in cutting, hoisting, fitting in position & applying a priming coat of approved steel promer using steel etc as required (a) In grating, framed guard bars, ladders, raillings, brackets and similar works.

Cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm ) finished with a floating coat of neat cement including cement slurry , but excluding the cost of nosing of steps complete. 40mm thick with 20mm nominal size stone aggregate

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with (a) Precoated galvanised iron profile sheets 0.50 mm thick

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : (a) Precoated galvanised iron profile sheets 0.50 mm thick

12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand).

15mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3 ( 1 cement : 3 c/ sand finished with a floating coat of neat cement on the roughside of single or half brick wall

SH : FINISHING

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface .

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shades (two or more coats on new work).

Finishing walls with Deluxe Multi surface paint system for interoirs and exteriors using Primer as manufacturerspecifications:Two or more coats applied @ 1.25 lts / 10 sqm over and including one coat of special primer applied 0.75 ltr / 10sqm

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on woodwork ( hard and soft wood )

Painting wood work with Deluxe Multi Surface paint of required shade , two or more coat applied @0.90 ltr/ 10 sqm over an undercoat of primer applied @0.75 lts / 10 sqm of approved brand and manufacture

Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand anf manufacture on steel work. ( second coat)

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.

P/F20 mm thick plank as eave board with (a) Uchan/Tolhao wood

SH :Construction of Sentry Tower Block -B

SH : EARTH WORK

Excavation in Hill Area in Soil by Mechanical Means (Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres)

Earth work in excavation by mechanical means ( Hydraulic excavator)/ manual means over area ( Exceeding 30cm in depth 1.5m in width as well as 10 sqm on plan ) including getting out and disposal ofexcavated earth , lead upto 50m and lift upto 1.5m as directed by the engineer in charge 2.6.1 All kind of soil

Filling available excavated earth (excluding rock) in trenches,plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m. Extra for additional lift of 1.5 m or part there of in . Ordinary or hard rock

Supplying and filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete

SH : CONCRETE WORKS

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cement :5 coarse sand :10graded stone aggrt. 40mm nominal size).

SH : R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrte excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams , suspended floors roofs having slop upto 15 degree landing balconies , shelves , chajjas lintels bands plain window sills staircases and spiral staircase above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in wall ( any thickness ) including attached pilaster , buttresses,plinth and string courses , fillets , columns , pillars , piers , abutments , post and struts etc above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including straightening, cutting bending,placing in position and binding all complete upto plinth level (a) Mild steel and medium \tensile steel bars

( b ) Tor steel bars.

FORM WORKS

Centering & shuttering including strutting , propping etc and removal of form for :(a) Foundation footings, bases of columns etc. and mass concrete.

(c) Columns, pillars, Piers , abutment , post and struts

(d) Lintel , beams , plinth beams , girder , bressumers ans cantilever with water proof ply 12mm thick

(b) Suspended floor , roof , landing, balconies ans access platform with water proof ply 12mm thick

(e) Edges of slab and breaks in floors and walls (i) Under 20cm wide

BRICKS WORKS

Brick work with 1st class common burnt clay FPS ( non modular) bricks in foundation and plinth in cement mortar 1: 4 (1 Cem:4C/Sand)

Brick work with 1st class common burnt clay FPS ( non modular ) in superstructure above plinth level upto floor V level in all shape and size in cement mortar 1:4(1 Cem:4C/Sand)

SH : STONE WORKS

Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 ( 1 Cement : 6 corase sand : 12 graded stone aggregate 20mm nominal size ) at plinth level with cement mortar 1:6 ( 1 cement : 6 c/sand )

WOOD WORKS

Providing beams i/c hoisting, fixing in position and applying wood preservative for the un exposed etc complete with (c) Local best quality Tolhao wood.

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

P/F expanded metal 20 x 60 mm strands 3.25 m wide and 1.6 mm thick for windows etc i/c 62x 19 mm beading of Iind class teak wood and priming coat with approved steel primer all complete

Providing & fixing 3 mm thick M.S. sheet door shutter and gat shutter with chaukat frame of 60 X 60 X 5 mm, door frame 50 X 50 X 5 mm bracing and lodging rod, hold fast etc. of 40 X 40 X 5 mm with locking arrangement, hooks and handles with sliding bolts and including the cost of priming coat.

Steel welded in built up sections, framed work in cutting, hoisting, fitting in position & applying a priming coat of approved steel promer using steel etc as required (a) In grating, framed guard bars, ladders, raillings, brackets and similar works.

Cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm ) finished with a floating coat of neat cement including cement slurry , but excluding the cost of nosing of steps complete. 40mm thick with 20mm nominal size stone aggregate

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with (a) Precoated galvanised iron profile sheets 0.50 mm thick

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : (a) Precoated galvanised iron profile sheets 0.50 mm thick

12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand).

15mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3 ( 1 cement : 3 c/ sand finished with a floating coat of neat cement on the roughside of single or half brick wall

SH : FINISHING

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface .

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shades (two or more coats on new work).

Finishing walls with Deluxe Multi surface paint system for interoirs and exteriors using Primer as manufacturerspecifications:Two or more coats applied @ 1.25 lts / 10 sqm over and including one coat of special primer applied 0.75 ltr / 10sqm

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on woodwork ( hard and soft wood )

Painting wood work with Deluxe Multi Surface paint of required shade , two or more coat applied @0.90 ltr/ 10 sqm over an undercoat of primer applied @0.75 lts / 10 sqm of approved brand and manufacture

Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand anf manufacture on steel work. ( second coat)

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.

P/F20 mm thick plank as eave board with (a) Uchan/Tolhao wood

SH :Construction of Sentry Tower Block -C

SH : EARTH WORK

Excavation in Hill Area in Soil by Mechanical Means (Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres)

Earth work in excavation by mechanical means ( Hydraulic excavator)/ manual means over area ( Exceeding 30cm in depth 1.5m in width as well as 10 sqm on plan ) including getting out and disposal ofexcavated earth , lead upto 50m and lift upto 1.5m as directed by the engineer in charge 2.6.1 All kind of soil

Filling available excavated earth (excluding rock) in trenches,plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m. Extra for additional lift of 1.5 m or part there of in . Ordinary or hard rock

Supplying and filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete

SH : CONCRETE WORKS

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cement :5 coarse sand :10graded stone aggrt. 40mm nominal size).

SH : R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrte excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams , suspended floors roofs having slop upto 15 degree landing balconies , shelves , chajjas lintels bands plain window sills staircases and spiral staircase above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in wall ( any thickness ) including attached pilaster , buttresses,plinth and string courses , fillets , columns , pillars , piers , abutments , post and struts etc above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including straightening, cutting bending,placing in position and binding all complete upto plinth level (a) Mild steel and medium \tensile steel bars

( b ) Tor steel bars.

FORM WORKS

Centering & shuttering including strutting , propping etc and removal of form for :(a) Foundation footings, bases of columns etc. and mass concrete.

(c) Columns, pillars, Piers , abutment , post and struts

(d) Lintel , beams , plinth beams , girder , bressumers ans cantilever with water proof ply 12mm thick

(b) Suspended floor , roof , landing, balconies ans access platform with water proof ply 12mm thick

(e) Edges of slab and breaks in floors and walls (i) Under 20cm wide

BRICKS WORKS

Brick work with 1st class common burnt clay FPS ( non modular) bricks in foundation and plinth in cement mortar 1: 4 (1 Cem:4C/Sand)

Brick work with 1st class common burnt clay FPS ( non modular ) in superstructure above plinth level upto floor V level in all shape and size in cement mortar 1:4(1 Cem:4C/Sand)

SH : STONE WORKS

Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 ( 1 Cement : 6 corase sand : 12 graded stone aggregate 20mm nominal size ) at plinth level with cement mortar 1:6 ( 1 cement : 6 c/sand )

WOOD WORKS

Providing beams i/c hoisting, fixing in position and applying wood preservative for the un exposed etc complete with (c) Local best quality Tolhao wood.

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

P/F expanded metal 20 x 60 mm strands 3.25 m wide and 1.6 mm thick for windows etc i/c 62x 19 mm beading of Iind class teak wood and priming coat with approved steel primer all complete

Providing & fixing 3 mm thick M.S. sheet door shutter and gat shutter with chaukat frame of 60 X 60 X 5 mm, door frame 50 X 50 X 5 mm bracing and lodging rod, hold fast etc. of 40 X 40 X 5 mm with locking arrangement, hooks and handles with sliding bolts and including the cost of priming coat.

Steel welded in built up sections, framed work in cutting, hoisting, fitting in position & applying a priming coat of approved steel promer using steel etc as required (a) In grating, framed guard bars, ladders, raillings, brackets and similar works.

Cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm ) finished with a floating coat of neat cement including cement slurry , but excluding the cost of nosing of steps complete. 40mm thick with 20mm nominal size stone aggregate

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with (a) Precoated galvanised iron profile sheets 0.50 mm thick

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : (a) Precoated galvanised iron profile sheets 0.50 mm thick

12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand).

15mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3 ( 1 cement : 3 c/ sand finished with a floating coat of neat cement on the roughside of single or half brick wall

SH : FINISHING

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface .

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shades (two or more coats on new work).

Finishing walls with Deluxe Multi surface paint system for interoirs and exteriors using Primer as manufacturerspecifications:Two or more coats applied @ 1.25 lts / 10 sqm over and including one coat of special primer applied 0.75 ltr / 10sqm

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on woodwork ( hard and soft wood )

Painting wood work with Deluxe Multi Surface paint of required shade , two or more coat applied @0.90 ltr/ 10 sqm over an undercoat of primer applied @0.75 lts / 10 sqm of approved brand and manufacture

Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand anf manufacture on steel work. ( second coat)

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.

P/F20 mm thick plank as eave board with (a) Uchan/Tolhao wood

SH :Construction of Sentry Tower Block -D

SH : EARTH WORK

Excavation in Hill Area in Soil by Mechanical Means (Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres)

Earth work in excavation by mechanical means ( Hydraulic excavator)/ manual means over area ( Exceeding 30cm in depth 1.5m in width as well as 10 sqm on plan ) including getting out and disposal ofexcavated earth , lead upto 50m and lift upto 1.5m as directed by the engineer in charge 2.6.1 All kind of soil

Filling available excavated earth (excluding rock) in trenches,plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m. Extra for additional lift of 1.5 m or part there of in . Ordinary or hard rock

Supplying and filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete

SH : CONCRETE WORKS

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cement :5 coarse sand :10graded stone aggrt. 40mm nominal size).

SH : R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrte excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams , suspended floors roofs having slop upto 15 degree landing balconies , shelves , chajjas lintels bands plain window sills staircases and spiral staircase above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in wall ( any thickness ) including attached pilaster , buttresses,plinth and string courses , fillets , columns , pillars , piers , abutments , post and struts etc above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including straightening, cutting bending,placing in position and binding all complete upto plinth level (a) Mild steel and medium \tensile steel bars

( b ) Tor steel bars.

FORM WORKS

Centering & shuttering including strutting , propping etc and removal of form for :(a) Foundation footings, bases of columns etc. and mass concrete.

(c) Columns, pillars, Piers , abutment , post and struts

(d) Lintel , beams , plinth beams , girder , bressumers ans cantilever with water proof ply 12mm thick

(b) Suspended floor , roof , landing, balconies ans access platform with water proof ply 12mm thick

(e) Edges of slab and breaks in floors and walls (i) Under 20cm wide

BRICKS WORKS

Brick work with 1st class common burnt clay FPS ( non modular) bricks in foundation and plinth in cement mortar 1: 4 (1 Cem:4C/Sand)

Brick work with 1st class common burnt clay FPS ( non modular ) in superstructure above plinth level upto floor V level in all shape and size in cement mortar 1:4(1 Cem:4C/Sand)

SH : STONE WORKS

Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 ( 1 Cement : 6 corase sand : 12 graded stone aggregate 20mm nominal size ) at plinth level with cement mortar 1:6 ( 1 cement : 6 c/sand )

WOOD WORKS

Providing beams i/c hoisting, fixing in position and applying wood preservative for the un exposed etc complete with (c) Local best quality Tolhao wood.

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

P/F expanded metal 20 x 60 mm strands 3.25 m wide and 1.6 mm thick for windows etc i/c 62x 19 mm beading of Iind class teak wood and priming coat with approved steel primer all complete

Providing & fixing 3 mm thick M.S. sheet door shutter and gat shutter with chaukat frame of 60 X 60 X 5 mm, door frame 50 X 50 X 5 mm bracing and lodging rod, hold fast etc. of 40 X 40 X 5 mm with locking arrangement, hooks and handles with sliding bolts and including the cost of priming coat.

Steel welded in built up sections, framed work in cutting, hoisting, fitting in position & applying a priming coat of approved steel promer using steel etc as required (a) In grating, framed guard bars, ladders, raillings, brackets and similar works.

Cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm ) finished with a floating coat of neat cement including cement slurry , but excluding the cost of nosing of steps complete. 40mm thick with 20mm nominal size stone aggregate

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with (a) Precoated galvanised iron profile sheets 0.50 mm thick

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : (a) Precoated galvanised iron profile sheets 0.50 mm thick

12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand).

15mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3 ( 1 cement : 3 c/ sand finished with a floating coat of neat cement on the roughside of single or half brick wall

SH : FINISHING

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface .

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shades (two or more coats on new work).

Finishing walls with Deluxe Multi surface paint system for interoirs and exteriors using Primer as manufacturerspecifications:Two or more coats applied @ 1.25 lts / 10 sqm over and including one coat of special primer applied 0.75 ltr / 10sqm

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on woodwork ( hard and soft wood )

Painting wood work with Deluxe Multi Surface paint of required shade , two or more coat applied @0.90 ltr/ 10 sqm over an undercoat of primer applied @0.75 lts / 10 sqm of approved brand and manufacture

Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand anf manufacture on steel work. ( second coat)

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.

P/F20 mm thick plank as eave board with (a) Uchan/Tolhao wood

SH :Construction of Barrack

SH : EARTH WORK

Excavation in Hill Area in Soil by Mechanical Means (Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres)

Earth work in excavation by mechanical means ( Hydraulic excavator)/ manual means over area ( Exceeding 30cm in depth 1.5m in width as well as 10 sqm on plan ) including getting out and disposal ofexcavated earth , lead upto 50m and lift upto 1.5m as directed by the engineer in charge 2.6.1 All kind of soil

Filling available excavated earth (excluding rock) in trenches,plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m. Extra for additional lift of 1.5 m or part there of in . Ordinary or hard rock

Supplying and filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete

SH : CONCRETE WORKS

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cement :5 coarse sand :10graded stone aggrt. 40mm nominal size).

SH : R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrte excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams , suspended floors roofs having slop upto 15 degree landing balconies , shelves , chajjas lintels bands plain window sills staircases and spiral staircase above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in wall ( any thickness ) including attached pilaster , buttresses,plinth and string courses , fillets , columns , pillars , piers , abutments , post and struts etc above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including straightening, cutting bending,placing in position and binding all complete upto plinth level (a) Mild steel and medium \tensile steel bars

( b ) Tor steel bars.

FORM WORKS

Centering & shuttering including strutting , propping etc and removal of form for :(a) Foundation footings, bases of columns etc. and mass concrete.

(c) Columns, pillars, Piers , abutment , post and struts

(d) Lintel , beams , plinth beams , girder , bressumers ans cantilever with water proof ply 12mm thick

BRICKS WORKS

Brick work with 1st class common burnt clay FPS ( non modular) bricks in foundation and plinth in cement mortar 1: 4 (1 Cem:4C/Sand)

Half brick masonry with 1st class common burnt burnt clay FPS in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 cement : 4 coarse sand)

SH : STONE WORKS

Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 ( 1 Cement : 6 corase sand : 12 graded stone aggregate 20mm nominal size ) at plinth level with cement mortar 1:6 ( 1 cement : 6 c/sand )

FLOORING

P/F glass strips in joints of terrazo/ cement concrete floor . 40mm wide and 4 mm thick

Cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm ) finished with a floating coat of neat cement including cement slurry , but excluding the cost of nosing of steps complete. 40mm thick with 20mm nominal size stone aggregate

ROOFING

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with (a) Precoated galvanised iron profile sheets 0.50 mm thick

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : (a) Precoated galvanised iron profile sheets 0.50 mm thick

Providing and fixing 4mm thick Rhino Brand A.C.Duro Board (Plain sheet) of 610x610 mm ceiling Roofing and Ceiling Item) with wooden beading 62x12mm Leihao wood spaced 61 cm centre to centre maximum on both sides etc complete ( frame work to be paid separately).

TUBULAR TRUSSES/STEEL/ALUMINIUM WINDOWS

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

Steel work in built up tubular ( round , square or rectangular tubes etc ) trusses etc including cutting, hoisting, fixing in position and applying a coat of approved steel primer including welding and bolted including special shaped fixing in position and applying a coat of approved steel primer including welding and bolted including special shaped

Steel glazed windows and ventilators of standard rolled steel section joints mitred and welded with 15 x 3 mm lugs 10 cm long with steel plugs embedded in cement concrete block 15 x 10 x 10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 stone aggregate 20 mm nominal size) or wooden plugs and screws of rawl plugs and screws or with fixing clips with bolts and nuts as required including providing and fixing of 4 mm thick glass panes with glazing clips complete including applying a priming coat of approved steel primer excluding cost of metal beadings and other fittings except necessary hinges or pivots as required.(i) Ready made steel windows (side hung /top hung)

Providing & fixing 3 mm thick M.S. sheet door shutter and gat shutter with chaukat frame of 60 X 60 X 5 mm, door frame 50 X 50 X 5 mm bracing and lodging rod, hold fast etc. of 40 X 40 X 5 mm with locking arrangement, hooks and handles with sliding bolts and including the cost of priming coat.

FINISHING

12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand).

15mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3 ( 1 cement : 3 c/ sand finished with a floating coat of neat cement on the roughside of single or half brick wall

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface .

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shades (two or more coats on new work).

Finishing walls with Deluxe Multi surface paint system for interoirs and exteriors using Primer as manufacturerspecifications:Two or more coats applied @ 1.25 lts / 10 sqm over and including one coat of special primer applied 0.75 ltr / 10sqm

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.

SH : MISCELLANEOUS

P/F 3mm thick M.S.Sheet eave board with ISA 25x25x4mm and flat 25x4mm with primer and painting complete as per direction of Engineer-in- Charge.

SH :Construction of Commander Office

SH : EARTH WORK

Excavation in Hill Area in Soil by Mechanical Means (Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres)

Earth work in excavation by mechanical means ( Hydraulic excavator)/ manual means over area ( Exceeding 30cm in depth 1.5m in width as well as 10 sqm on plan ) including getting out and disposal ofexcavated earth , lead upto 50m and lift upto 1.5m as directed by the engineer in charge 2.6.1 All kind of soil

Filling available excavated earth (excluding rock) in trenches,plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m. Extra for additional lift of 1.5 m or part there of in . Ordinary or hard rock

Supplying and filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete

SH : CONCRETE WORKS

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cement :5 coarse sand :10graded stone aggrt. 40mm nominal size).

SH : R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrte excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams , suspended floors roofs having slop upto 15 degree landing balconies , shelves , chajjas lintels bands plain window sills staircases and spiral staircase above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in wall ( any thickness ) including attached pilaster , buttresses,plinth and string courses , fillets , columns , pillars , piers , abutments , post and struts etc above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including straightening, cutting bending,placing in position and binding all complete upto plinth level (a) Mild steel and medium \tensile steel bars

( b ) Tor steel bars.

FORM WORKS

Centering & shuttering including strutting , propping etc and removal of form for :(a) Foundation footings, bases of columns etc. and mass concrete.

(c) Columns, pillars, Piers , abutment , post and struts

(d) Lintel , beams , plinth beams , girder , bressumers ans cantilever with water proof ply 12mm thick

BRICKS WORKS

Brick work with 1st class common burnt clay FPS ( non modular) bricks in foundation and plinth in cement mortar 1: 4 (1 Cem:4C/Sand)

Half brick masonry with 1st class common burnt burnt clay FPS in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 cement : 4 coarse sand)

SH : STONE WORKS

Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 ( 1 Cement : 6 corase sand : 12 graded stone aggregate 20mm nominal size ) at plinth level with cement mortar 1:6 ( 1 cement : 6 c/sand )

FLOORINGKS

Cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm ) finished with a floating coat of neat cement including cement slurry , but excluding the cost of nosing of steps complete. 40mm thick with 20mm nominal size stone aggregate

ROOFING

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with (a) Precoated galvanised iron profile sheets 0.50 mm thick

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : (a) Precoated galvanised iron profile sheets 0.50 mm thick

TUBULAR TRUSSES/STEEL/ALUMINIUM WINDOWS

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

Steel work in built up tubular ( round , square or rectangular tubes etc ) trusses etc including cutting, hoisting, fixing in position and applying a coat of approved steel primer including welding and bolted including special shaped fixing in position and applying a coat of approved steel primer including welding and bolted including special shaped

Steel glazed windows and ventilators of standard rolled steel section joints mitred and welded with 15 x 3 mm lugs 10 cm long with steel plugs embedded in cement concrete block 15 x 10 x 10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 stone aggregate 20 mm nominal size) or wooden plugs and screws of rawl plugs and screws or with fixing clips with bolts and nuts as required including providing and fixing of 4 mm thick glass panes with glazing clips complete including applying a priming coat of approved steel primer excluding cost of metal beadings and other fittings except necessary hinges or pivots as required.(i) Ready made steel windows (side hung /top hung)

Providing & fixing 3 mm thick M.S. sheet door shutter and gat shutter with chaukat frame of 60 X 60 X 5 mm, door frame 50 X 50 X 5 mm bracing and lodging rod, hold fast etc. of 40 X 40 X 5 mm with locking arrangement, hooks and handles with sliding bolts and including the cost of priming coat.

FINISHING

12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand).

15mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3 ( 1 cement : 3 c/ sand finished with a floating coat of neat cement on the roughside of single or half brick wall

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface .

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shades (two or more coats on new work).

Finishing walls with Deluxe Multi surface paint system for interoirs and exteriors using Primer as manufacturerspecifications:Two or more coats applied @ 1.25 lts / 10 sqm over and including one coat of special primer applied 0.75 ltr / 10sqm

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.

SH : MISCELLANEOUS

P/F 3mm thick M.S.Sheet eave board with ISA 25x25x4mm and flat 25x4mm with primer and painting complete as per direction of Engineer-in- Charge.

SH :Construction of kitchen cum dining hall

SH : EARTH WORK

Excavation in Hill Area in Soil by Mechanical Means (Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres)

Earth work in excavation by mechanical means ( Hydraulic excavator)/ manual means over area ( Exceeding 30cm in depth 1.5m in width as well as 10 sqm on plan ) including getting out and disposal ofexcavated earth , lead upto 50m and lift upto 1.5m as directed by the engineer in charge 2.6.1 All kind of soil

Filling available excavated earth (excluding rock) in trenches,plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m. Extra for additional lift of 1.5 m or part there of in . Ordinary or hard rock

Supplying and filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete

SH : CONCRETE WORKS

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cement :5 coarse sand :10graded stone aggrt. 40mm nominal size).

SH : R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrte excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams , suspended floors roofs having slop upto 15 degree landing balconies , shelves , chajjas lintels bands plain window sills staircases and spiral staircase above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in wall ( any thickness ) including attached pilaster , buttresses,plinth and string courses , fillets , columns , pillars , piers , abutments , post and struts etc above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including straightening, cutting bending,placing in position and binding all complete upto plinth level (a) Mild steel and medium \tensile steel bars

( b ) Tor steel bars.

FORM WORKS

Centering & shuttering including strutting , propping etc and removal of form for :(a) Foundation footings, bases of columns etc. and mass concrete.

(c) Columns, pillars, Piers , abutment , post and struts

(d) Lintel , beams , plinth beams , girder , bressumers ans cantilever with water proof ply 12mm thick

BRICKS WORKS

Brick work with 1st class common burnt clay FPS ( non modular) bricks in foundation and plinth in cement mortar 1: 4 (1 Cem:4C/Sand)

Half brick masonry with 1st class common burnt burnt clay FPS in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 cement : 4 coarse sand)

SH : STONE WORKS

Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 ( 1 Cement : 6 corase sand : 12 graded stone aggregate 20mm nominal size ) at plinth level with cement mortar 1:6 ( 1 cement : 6 c/sand )

FLOORING

Cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm ) finished with a floating coat of neat cement including cement slurry , but excluding the cost of nosing of steps complete. 40mm thick with 20mm nominal size stone aggregate

ROOFING

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with (a) Precoated galvanised iron profile sheets 0.50 mm thick

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : (a) Precoated galvanised iron profile sheets 0.50 mm thick

TUBULAR TRUSSES/STEEL/ALUMINIUM WINDOWS

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

Steel work in built up tubular ( round , square or rectangular tubes etc ) trusses etc including cutting, hoisting, fixing in position and applying a coat of approved steel primer including welding and bolted including special shaped fixing in position and applying a coat of approved steel primer including welding and bolted including special shaped

Steel glazed windows and ventilators of standard rolled steel section joints mitred and welded with 15 x 3 mm lugs 10 cm long with steel plugs embedded in cement concrete block 15 x 10 x 10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 stone aggregate 20 mm nominal size) or wooden plugs and screws of rawl plugs and screws or with fixing clips with bolts and nuts as required including providing and fixing of 4 mm thick glass panes with glazing clips complete including applying a priming coat of approved steel primer excluding cost of metal beadings and other fittings except necessary hinges or pivots as required.(i) Ready made steel windows (side hung /top hung)

Providing & fixing 3 mm thick M.S. sheet door shutter and gat shutter with chaukat frame of 60 X 60 X 5 mm, door frame 50 X 50 X 5 mm bracing and lodging rod, hold fast etc. of 40 X 40 X 5 mm with locking arrangement, hooks and handles with sliding bolts and including the cost of priming coat.

FINISHING

12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand).

15mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3 ( 1 cement : 3 c/ sand finished with a floating coat of neat cement on the roughside of single or half brick wall

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface .

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shades (two or more coats on new work).

Finishing walls with Deluxe Multi surface paint system for interoirs and exteriors using Primer as manufacturerspecifications:Two or more coats applied @ 1.25 lts / 10 sqm over and including one coat of special primer applied 0.75 ltr / 10sqm

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.

SH : MISCELLANEOUS

P/F 3mm thick M.S.Sheet eave board with ISA 25x25x4mm and flat 25x4mm with primer and painting complete as per direction of Engineer-in- Charge.

SH :Construction of Toilet Block 6 Bath

SH : EARTH WORK

Excavation in Hill Area in Soil by Mechanical Means (Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres)

Earth work in excavation by mechanical means ( Hydraulic excavator)/ manual means over area ( Exceeding 30cm in depth 1.5m in width as well as 10 sqm on plan ) including getting out and disposal ofexcavated earth , lead upto 50m and lift upto 1.5m as directed by the engineer in charge 2.6.1 All kind of soil

Filling available excavated earth (excluding rock) in trenches,plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m. Extra for additional lift of 1.5 m or part there of in . Ordinary or hard rock

Supplying and filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete

SH : CONCRETE WORKS

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cement :5 coarse sand :10graded stone aggrt. 40mm nominal size).

SH : R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrte excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams , suspended floors roofs having slop upto 15 degree landing balconies , shelves , chajjas lintels bands plain window sills staircases and spiral staircase above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in wall ( any thickness ) including attached pilaster , buttresses,plinth and string courses , fillets , columns , pillars , piers , abutments , post and struts etc above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including straightening, cutting bending,placing in position and binding all complete upto plinth level (a) Mild steel and medium \tensile steel bars

( b ) Tor steel bars.

FORM WORKS

Centering & shuttering including strutting , propping etc and removal of form for :(a) Foundation footings, bases of columns etc. and mass concrete.

(c) Columns, pillars, Piers , abutment , post and struts

(d) Lintel , beams , plinth beams , girder , bressumers ans cantilever with water proof ply 12mm thick

BRICKS WORKS

Half brick masonry with 1st class common burnt burnt clay FPS in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 cement : 4 coarse sand)

SH : STONE WORKS

Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 ( 1 Cement : 6 corase sand : 12 graded stone aggregate 20mm nominal size ) at plinth level with cement mortar 1:6 ( 1 cement : 6 c/sand )

WOOD WORKS

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length ( hold fast lugs or dash fastener shall be paid for separately

P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory (a)Local best quality Teak wood 35 mm thick shutters

Providing and fixing Local best quality plain lining tongued and grooved / on and i/c wooden plug complete with necessary screws and priming coat on unexposed surface (a) 19 mm thick (i) local best quality uningthou.

Providing and fixing 38 mm thick louvered shutter with fixed venetian 12 mm thick for windows i/c bright finished or / and black enamelled iron hinges with necessary screws (a) Local best quality Uningthou

Providing 40x5mm flat iron hold fast 40cm long i/c fixing to frames with10mm dia bolts,nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : 3 coarse sand : 6 stone aggrt. 20mm nominal guage).

Providing beams i/c hoisting, fixing in position and applying wood preservative for the un exposed etc complete with (c) Local best quality Tolhao wood.

P/F ISI marked oxidised MS Sliding door bolts with nuts & screws etc. complete.(a) 300x16 mm

P/F ISI marked oxidised MS Tower bolts black finished ( barrel type ) with necessary screws etc complete. (a) 250x10 mm

P/F ISI marked oxidised MS Handles conforming to IS : 4992 with necessary screws etc. complete. (a) 125mm

(b) 100 mmAl handles

FLOORING

Cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm ) finished with a floating coat of neat cement including cement slurry , but excluding the cost of nosing of steps complete. 40mm thick with 20mm nominal size stone aggregate

ROOFING

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with (a) Precoated galvanised iron profile sheets 0.50 mm thick

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : (a) Precoated galvanised iron profile sheets 0.50 mm thick

TUBULAR TRUSSES/STEEL/ALUMINIUM WINDOWS

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

Providing & fixing M.S. round or square bars with M.S flats at required spacings in wooden frames of windows and clerestory window

FINISHING

12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand).

15mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3 ( 1 cement : 3 c/ sand finished with a floating coat of neat cement on the roughside of single or half brick wall.

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface .

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shades (two or more coats on new work).

Finishing walls with Deluxe Multi surface paint system for interoirs and exteriors using Primer as manufacturerspecifications:Two or more coats applied @ 1.25 lts / 10 sqm over and including one coat of special primer applied 0.75 ltr / 10sqm

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on woodwork ( hard and soft wood )

Painting wood work with Deluxe Multi Surface paint of required shade , two or more coat applied @0.90 ltr/ 10 sqm over an undercoat of primer applied @0.75 lts / 10 sqm of approved brand and manufacture

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.

SH : MISCELLANEOUS

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.(a) 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.50 mm nominal outer dia Pipes

Providing and fixing G.i. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.internal work exposed on wall (a) 20 mm nominal outer pipe dia pipes

(a) 15 mm nominal outer pipe dia pipes

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 (a) 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. (a) 15 mm nominal bore .

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. (a) 25 mm nominal bore, 152mm long, weighing not less than 440 gms

SH :Construction of Toilet Block 6 WC i/c 50users septic tank Block-A

SH : EARTH WORK

Excavation in Hill Area in Soil by Mechanical Means (Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres)

Earth work in excavation by mechanical means ( Hydraulic excavator)/ manual means over area ( Exceeding 30cm in depth 1.5m in width as well as 10 sqm on plan ) including getting out and disposal ofexcavated earth , lead upto 50m and lift upto 1.5m as directed by the engineer in charge 2.6.1 All kind of soil

Filling available excavated earth (excluding rock) in trenches,plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m. Extra for additional lift of 1.5 m or part there of in . Ordinary or hard rock

Supplying and filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete

SH : CONCRETE WORKS

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cement :5 coarse sand :10graded stone aggrt. 40mm nominal size).

b) 1:3:6 (1 cement :3 coarse sand :6 graded stone aggrt. 40mm nominal size).

c) 1:2:4 (1 cement :2 coarse sand :4 graded stone aggrt. 20mm nominal size).

SH : R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrte excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams , suspended floors roofs having slop upto 15 degree landing balconies , shelves , chajjas lintels bands plain window sills staircases and spiral staircase above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in wall ( any thickness ) including attached pilaster , buttresses,plinth and string courses , fillets , columns , pillars , piers , abutments , post and struts etc above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including straightening, cutting bending,placing in position and binding all complete upto plinth level (a) Mild steel and medium \tensile steel bars

( b ) Tor steel bars.

FORM WORKS

Centering & shuttering including strutting , propping etc and removal of form for :(a) Foundation footings, bases of columns etc. and mass concrete.

(c) Columns, pillars, Piers , abutment , post and struts

(d) Lintel , beams , plinth beams , girder , bressumers ans cantilever with water proof ply 12mm thick

(b) Suspended floor , roof , landing, balconies ans access platform with water proof ply 12mm thick

(e) Edges of slab and breaks in floors and walls (i) Under 20cm wide

BRICKS WORKS

Brick work with 1st class common burnt clay FPS ( non modular) bricks in foundation and plinth in cement mortar 1: 4 (1 Cem:4C/Sand)

Half brick masonry with 1st class common burnt burnt clay FPS in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 cement : 4 coarse sand)

SH : STONE WORKS

Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 ( 1 Cement : 6 corase sand : 12 graded stone aggregate 20mm nominal size ) at plinth level with cement mortar 1:6 ( 1 cement : 6 c/sand )

WOOD WORKS

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length ( hold fast lugs or dash fastener shall be paid for separately

P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory (a)Local best quality Teak wood 35 mm thick shutters

Providing and fixing Local best quality plain lining tongued and grooved / on and i/c wooden plug complete with necessary screws and priming coat on unexposed surface (a) 19 mm thick (i) local best quality uningthou.

Providing beams i/c hoisting, fixing in position and applying wood preservative for the un exposed etc complete with (c) Local best quality Tolhao wood.

Providing and fixing 38 mm thick louvered shutter with fixed venetian 12 mm thick for windows i/c bright finished or / and black enamelled iron hinges with necessary screws (a) Local best quality Uningthou

Providing 40x5mm flat iron hold fast 40cm long i/c fixing to frames with10mm dia bolts,nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : 3 coarse sand : 6 stone aggrt. 20mm nominal guage).

P/F ISI marked oxidised MS Sliding door bolts with nuts & screws etc. complete.(a) 300x16 mm

P/F ISI marked oxidised MS Tower bolts black finished ( barrel type ) with necessary screws etc complete. (a) 250x10 mm

P/F ISI marked oxidised MS Handles conforming to IS : 4992 with necessary screws etc. complete. (a) 125mm

FLOORING

Cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm ) finished with a floating coat of neat cement including cement slurry , but excluding the cost of nosing of steps complete. 40mm thick with 20mm nominal size stone aggregate

ROOFING

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with (a) Precoated galvanised iron profile sheets 0.50 mm thick

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : (a) Precoated galvanised iron profile sheets 0.50 mm thick

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

FINISHING

12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand).

15mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3 ( 1 cement : 3 c/ sand finished with a floating coat of neat cement on the roughside of single or half brick wall

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface .

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shades (two or more coats on new work).

Finishing walls with Deluxe Multi surface paint system for interoirs and exteriors using Primer as manufacturerspecifications:Two or more coats applied @ 1.25 lts / 10 sqm over and including one coat of special primer applied 0.75 ltr / 10sqm

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on woodwork ( hard and soft wood )

Painting wood work with Deluxe Multi Surface paint of required shade , two or more coat applied @0.90 ltr/ 10 sqm over an undercoat of primer applied @0.75 lts / 10 sqm of approved brand and manufacture

SH : SANITARY INSTALLATION

Providing and fixing White Vitreous china pedestal type ( European type / wash down type) water closet pan.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.(a) 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(a) 50 mm nominal outer dia Pipes

(b)100 mm nominal outer dia Pipes

Providing and fixing C.I.cover with frame(for Mainhole and chember)600mm x 450mm(Heavy Duty)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.internal work exposed on wall (a) 20 mm nominal outer pipe dia pipes

(a) 15 mm nominal outer pipe dia pipes

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 (a) 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. (a) 15 mm nominal bore .

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. (a) 25 mm nominal bore, 152mm long, weighing not less than 440 gms

SH :Construction of Toilet Block 6 WC i/c 50users septic tank (Block-B)

SH : EARTH WORK

Excavation in Hill Area in Soil by Mechanical Means (Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres)

Earth work in excavation by mechanical means ( Hydraulic excavator)/ manual means over area ( Exceeding 30cm in depth 1.5m in width as well as 10 sqm on plan ) including getting out and disposal ofexcavated earth , lead upto 50m and lift upto 1.5m as directed by the engineer in charge 2.6.1 All kind of soil

Filling available excavated earth (excluding rock) in trenches,plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m. Extra for additional lift of 1.5 m or part there of in . Ordinary or hard rock

Supplying and filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete

SH : CONCRETE WORKS

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cement :5 coarse sand :10graded stone aggrt. 40mm nominal size).

b) 1:3:6 (1 cement :3 coarse sand :6 graded stone aggrt. 40mm nominal size).

c) 1:2:4 (1 cement :2 coarse sand :4 graded stone aggrt. 20mm nominal size).

SH : R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrte excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams , suspended floors roofs having slop upto 15 degree landing balconies , shelves , chajjas lintels bands plain window sills staircases and spiral staircase above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in wall ( any thickness ) including attached pilaster , buttresses,plinth and string courses , fillets , columns , pillars , piers , abutments , post and struts etc above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including straightening, cutting bending,placing in position and binding all complete upto plinth level (a) Mild steel and medium \tensile steel bars

( b ) Tor steel bars.

FORM WORKS

Centering & shuttering including strutting , propping etc and removal of form for :(a) Foundation footings, bases of columns etc. and mass concrete.

(c) Columns, pillars, Piers , abutment , post and struts

(d) Lintel , beams , plinth beams , girder , bressumers ans cantilever with water proof ply 12mm thick

(b) Suspended floor , roof , landing, balconies ans access platform with water proof ply 12mm thick

(e) Edges of slab and breaks in floors and walls (i) Under 20cm wide

BRICKS WORKS

Brick work with 1st class common burnt clay FPS ( non modular) bricks in foundation and plinth in cement mortar 1: 4 (1 Cem:4C/Sand)

Half brick masonry with 1st class common burnt burnt clay FPS in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 cement : 4 coarse sand)

SH : STONE WORKS

Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 ( 1 Cement : 6 corase sand : 12 graded stone aggregate 20mm nominal size ) at plinth level with cement mortar 1:6 ( 1 cement : 6 c/sand )

WOOD WORKS

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length ( hold fast lugs or dash fastener shall be paid for separately

P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory P/F panelled, glazed or panelled & glazed shutters for doors, windows and clerestory (a)Local best quality Teak wood 35 mm thick shutters

Providing and fixing Local best quality plain lining tongued and grooved / on and i/c wooden plug complete with necessary screws and priming coat on unexposed surface (a) 19 mm thick (i) local best quality uningthou.

Providing beams i/c hoisting, fixing in position and applying wood preservative for the un exposed etc complete with (c) Local best quality Tolhao wood.

Providing and fixing 38 mm thick louvered shutter with fixed venetian 12 mm thick for windows i/c bright finished or / and black enamelled iron hinges with necessary screws (a) Local best quality Uningthou

Providing 40x5mm flat iron hold fast 40cm long i/c fixing to frames with10mm dia bolts,nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : 3 coarse sand : 6 stone aggrt. 20mm nominal guage).

P/F ISI marked oxidised MS Sliding door bolts with nuts & screws etc. complete.(a) 300x16 mm

P/F ISI marked oxidised MS Tower bolts black finished ( barrel type ) with necessary screws etc complete. (a) 250x10 mm

P/F ISI marked oxidised MS Handles conforming to IS : 4992 with necessary screws etc. complete. (a) 125mm

FLOORING

Cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm ) finished with a floating coat of neat cement including cement slurry , but excluding the cost of nosing of steps complete. 40mm thick with 20mm nominal size stone aggregate

ROOFING

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with (a) Precoated galvanised iron profile sheets 0.50 mm thick

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : (a) Precoated galvanised iron profile sheets 0.50 mm thick

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

FINISHING

12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand).

15mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3 ( 1 cement : 3 c/ sand finished with a floating coat of neat cement on the roughside of single or half brick wall

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface .

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shades (two or more coats on new work).

Finishing walls with Deluxe Multi surface paint system for interoirs and exteriors using Primer as manufacturerspecifications:Two or more coats applied @ 1.25 lts / 10 sqm over and including one coat of special primer applied 0.75 ltr / 10sqm

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on woodwork ( hard and soft wood )

Painting wood work with Deluxe Multi Surface paint of required shade , two or more coat applied @0.90 ltr/ 10 sqm over an undercoat of primer applied @0.75 lts / 10 sqm of approved brand and manufacture

SH : SANITARY INSTALLATION

Providing and fixing White Vitreous china pedestal type ( European type / wash down type) water closet pan.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.(a) 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(a) 50 mm nominal outer dia Pipes

(b)100 mm nominal outer dia Pipes

Providing and fixing C.I.cover with frame(for Mainhole and chember)600mm x 450mm(Heavy Duty)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.internal work exposed on wall (a) 20 mm nominal outer pipe dia pipes

(a) 15 mm nominal outer pipe dia pipes

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 (a) 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. (a) 15 mm nominal bore .

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. (a) 25 mm nominal bore, 152mm long, weighing not less than 440 gms

SH :Construction of Ground Sump 15000 litres capacity with overhead Tank

SH : EARTH WORK

Earth work in excavation by mechanical means ( Hydraulic excavator)/ manual means over area ( Exceeding 30cm in depth 1.5m in width as well as 10 sqm on plan ) including getting out and disposal ofexcavated earth , lead upto 50m and lift upto 1.5m as directed by the engineer in charge 2.6.1 All kind of soil

Filling available excavated earth (excluding rock) in trenches,plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m. Extra for additional lift of 1.5 m or part there of in . Ordinary or hard rock

SH : CONCRETE WORKS

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering : -b) 1:3:6 (1 cement :3 coarse sand :6 graded stone aggrt. 40mm nominal size).

SH : R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrte excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams , suspended floors roofs having slop upto 15 degree landing balconies , shelves , chajjas lintels bands plain window sills staircases and spiral staircase above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in wall ( any thickness ) including attached pilaster , buttresses,plinth and string courses , fillets , columns , pillars , piers , abutments , post and struts etc above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including straightening, cutting bending,placing in position and binding all complete upto plinth level (a) Mild steel and medium \ tensile steel bars

( b ) Tor steel bars.

FORM WORKS

Centering & shuttering including strutting , propping etc and removal of form for :(a) Foundation footings, bases of columns etc. and mass concrete.

(c) Columns, pillars, Piers , abutment , post and struts

(d) Lintel , beams , plinth beams , girder , bressumers ans cantilever with water proof ply 12mm thick

(b) Suspended floor , roof , landing, balconies ans access platform with water proof ply 12mm thick

(e) Edges of slab and breaks in floors and walls (i) Under 20cm wide

(g) Vertical and horizontal fins individiually or formimg box louvers band , facias and eaves boards

BRICKS WORKS

Half brick masonry with 1st class common burnt burnt clay FPS in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 cement : 4 coarse sand)

FINISHING

12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand).

15mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3 ( 1 cement : 3 c/ sand finished with a floating coat of neat cement on the roughside of single or half brick wall

Providing and applying white cement base putty of average thickness 1mm of approved brand and manufacture , over plastered surface to prepare the surface even and smooth complete.

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface .

Finishing walls with Deluxe Multi surface paint system for interoirs and exteriors using Primer as manufacturerspecifications:Two or more coats applied @ 1.25 lts / 10 sqm over and including one coat of special primer applied 0.75 ltr / 10sqm

SH : SANITARY INSTALLATION

Providing and fixing C.I.cover with frame(for Mainhole and chember)600mm x 450mm(Heavy Duty)

Providing and fixing G.i. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.internal work exposed on wall (a) 20 mm nominal outer pipe dia pipes

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. (a) 25 mm nominal bore, 152mm long, weighing not less than 440 gms

Nongthombam Motilal Singh

Andy Pamei