Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹18.4 L
Closing Date
19 Jan 2026, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Single Packet
Normal Tender
No
Itemwise/Consigneewise
Lowest to Highest
RDSO-QA
RDSO
Expenditure
General
P08
6 conditions · 5 needing a document upload
Vendors approved by any centralized vendor approving agencies for developmental orders with condition of prototype approval and/or field trial, may be given developmental order for 5% of Net Procurable Quantity [NPQ] within or outside NPQ. (i) Order on firms approved for developmental ordering subject to prototype approval/field trial can be up to the quantity required for field trial as indicated in the vendor directory provided no such orders has been placed on the firm earlier. Such firms will mandatorily indicate the orders received for the tendered item in the past and supply status against the same with their offer. If the firm has not received any order, a NIL statement has to be attached. If no document is attached, it will be considered that such order has already been placed on the firm and no further orders will be placed. (ii) If quantity required for field trial is not indicated in the vendor directory, then order quantity on such firms will be limited to 5% of NPQ. However the total order on developmental firms will be limited to 20% of the NPQ.
In cases of Contracts/ POs for a value in excess of Rs. 10 cores, the contractor shall be required to provide a certificate from the statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of local content. Such certificates shall be required to be submitted by the contractor along with their each online bill in IREPS. The supplier must include 'PO number & PO date', name of item, name of firm, local content percentage, and details of the location(s) at which the local value addition is made, in the certificate. In case the contractor/supplier does not meet the stipulated local content requirement and the category of the supplier changes from Class-1 to Class-II/Non-local or from Class-II to Non-local, a penalty in the form of deduction of 10% of the contract value shall be imposed. For severable contracts or in case of part supply, a penalty in the form of deduction of 10% of the value shall be imposed commensurate to that lot only. This penalty of 10% on the contract value will be over and above the liquidated damages & other deductions/penalties if any applicable in the contract. However, contract once awarded shall not be terminated on this account.
In terms of clause as per Para 2.4.3 of N. Rly Instructions to tenderers for e-Tender, Rev.1.21 of April 2024 and correction slip 1 of N. Rly Instructions to tenderers for e-Tender, Rev.1.21 of April 2024 regarding Restrictions on procurement from a bidders of a country which shares a land border with India, I, hereby confirm that I have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India and I certify that I am not from such a country (Note: In case of bidder being from such a country which shares a land border with India. Bidder will be eligible to bid in this tender only, if the bidder is registered with the competent Authority. Then evidence of valid registration by the competent Authority is to be attached along with the tender). FIRM TO ALSO ATTACH LAND BORDER CERTIFICATE.
In keeping with the Public Procurement (Preference to Make in India) Order, 2017, as amended, and in terms of clause 2.4.2 of Instructions to Tenderers for e- Tender, Rev. 1.21 of April, 2024, Public procurement of this item is restricted to Class - I local suppliers only Bidders are required to indicate the Local Content in their offered product in the requisite field in the offer form and offers from vendors, who do not qualify to be Class - I local supplier, shall be summarily rejected. In case any vendor, who does not qualify to be a Class- I local supplier for the tendered item participates in the tender, the bidder does so at its own risk and cost and Railways shall not be liable for any loss or damage caused to the bidder.
Authorized dealers/ distributors need to quote with Tender specific authorization from the approved vendors/developmental vendors/Manufacturers failing which offer will be summarily rejected. While issuing such authorizations the approved vendors/developmental vendors/Manufacturers must ensure that these authorized dealers/distributors are in a position to raise inspection requests on IREPS.
The Railway reserves the right to order either the entire or the bulk quantity on the Approved RDSO vendors for Item ID 3100054 under sub Item ID: 3100054001. Status of approval of tenderer shall be reckoned as on the date of tender opening and not thereafter, unless it is a case of downgrading/ removal/ suspension/ banning. The quantities to be ordered on Approved Vendors will be decided considering factors which include past (supply as well as quality) performance, capacity, delivery requirements, quantity under procurement, and nature of item, outstanding order load etc. and the tender conditions. Vendors approved for developmental ordering shall be eligible for developmental order of up to 20% of Net Procurable Quantity [NPQ] in regular tenders. When the vendor approving agency grades vendors under two categories, say, Part I and Part II categories, the developmental order on unapproved/untried firm can be up to 5% of NPQ within or outside NPQ. However, if the vendor approving agency grades vendors only under a single category (i.e. there is no system of approving the firms under two categories, say, Part I and Part II categories), developmental orders can be given up to 20% of NPQ on unapproved/untried firms within the NPQ. This will be subject to the procuring entity being prima-facie satisfied that such firms are capable of executing the order. Such firms must submit their credentials like Machinery & Plant, Testing facilities, QAP, Technical Manpower, Supply performance against earlier orders for same or similar items etc. along with their e-offer. Failure to submit such credentials as stated above will make the offer liable to be ignored. Such developmental order can be placed either after assessment of their capacity and capability by the source approving authority within 6 months of advice from the purchase authority or with the condition that bulk supply will start after approval of prototype by nominated agency as mentioned in the Purchase Order. Where there are not more than three Indian suppliers categorized as Approved vendor for the tendered item, developmental vendors can be considered for placement of bulk order without any quantity restrictions. However, while considering such vendors, factors including past performance, capacity, and delivery requirements, quantity under procurement, nature of items, outstanding order load, etc. shall be considered in a transparent manner subject to rates being reasonable. Quantity allocation among eligible vendors shall be based on pre- decided tender criteria. Such orders shall be treated as Bulk Orders. A Supplier or bidder shall be considered to be from India if (i) the entity is incorporated in India, or (ii) a majority of its shareholding or effective control of the entity is exercised from India, or (iii) more than 50% of the value of item being supplied has been added in India. Where there is no approved vendor for an item, developmental vendors can be considered for placement of bulk order without any quantity restrictions. However, while considering such vendors, factors including past performance, capacity, delivery requirements, quantity under procurement, nature of item, outstanding order load etc. shall be considered in a transparent manner, subject to rates being reasonable. Quantity allocation among eligible vendors shall be based on pre- decided tender criteria.
29 conditions · 3 needing a document upload
EMD: Rs. 1841580. However, exemptions are applicable as per NR Instruction to tenderers for electronic tender Rev. 1.21 of April 2024, along with correction Slip no 1.
The currency of the Rate contract will be for a period of one year from the date of commencement of RC. However currency of the contract can be extended by another 3 month with the consent of both the parties to the contract.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Following certificate should be provided by the bidder along with the bid. I have read the clauses regarding restrictions on procerement from a bidder of a country which shares a land border with India (please strike out, whichever is not applicable): (a) I certify that I am not from such a country; OR (b) I am from such a country and have been registered with a competent authority. I hereby certify that I fulfill all requirements in this regard and eligible to be considered. Evidence of valid registration by the competent authority is attached.
This tender complies with the Public Procurement (Preference to Make in India) Order, 2017, as amended, and Instructions to Tenderers for eTender, Rev. 1.21 of April, 2024.
Inspection By RDSO as per Railway Board circular No 2022/RS(G)/779/8 dated 26-09-2025. Tenderers are to mention the place of OEM premises for inspection in their offer for Pre- inspection by RDSO.
Price Variation Clause: PVC clause will be applicable. The Tenderers shall quote their rates based on the price variation formula for the Tendered item attached herewith. Tenderers should note that the offers on firm price basis or offers based on the price variation formula explicit variation vis-a-vis the price variation formula attached with this tender shall be summarily rejected.
Corrigendum: Purchaser reserves the right to issue any corrigendum to the tender up to five days prior to the due date of opening of the tender, excluding the date of opening. Tenderers are also advised, in their own interest, to regularly check, till the opening of the tender, the website www.ireps.gov.in to see whether any such corrigendum to the tender has been issued or not and for submitting their e-bids or revising their e-bids
Bank Account details for the purpose of payment shall be taken as appearing in the profile of the vendor in IREPS. In case, there is any change in the bank account details, vendors are advised to update their bank account details in their IREPS profile. The Details of Bank Account of FA & CAO/NR for the purpose of submission of Bank Guarantee towards Security Deposit are as under: 1. Name of the Bank : State Bank of India 2. Account No. : 30788224089 3.Name of the Branch : New Delhi Main Branch (00691) 4. Name of Account holder : Northern Railway (HQ) (Receipt A/c) 5. IFSC Code : SBIN0000691
Security Money: The security money deposit shall be the of 5% of contract value. However, exemptions are applicable as per NR Instructions for electronic tender Rev. 1.21 of April 2024, along with correction Slip no 1.
3 conditions
Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted.
Price Variation Clause: No deviation from the Price Variation Clause stipulated in the tender is permitted.
FOR - Destination
1 location across Delhi · 646.29 Kilometre total
RC Tender for 6 Core x 1.5 Sq.mm Signaling Cable.
08255365A~NR
08255365A
Open - Indigenous
Goods
Delhi
₹0
₹18.4 L
19 Jan 2026
17 Dec 2025
1 item · 646.29 Kilometre total
PVC insulated Armoured, Unscreened, Underground Railway Signaling Cable Copper Con ductor as per Specification No.IRS:S-63/2014 (Rev.4.0) or latest amendment as on the date of Opening of tender, size 6 Core x 1.5 Sq.mm. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 2 %age , Item Category : Special (Signaling Cables) , Total PO value variation Permitted: Not Applicable ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/SIG/C/TKJ | Delhi | 646.29 Kilometre |
| Total | 646.29 Kilometre | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .