SITC of High Mast Light at Mansar Lake and other Adjoining Areas

Amount

Design,fabrication,erection and commissioning of 12.5 mtrs,long octagonal High Mast system,hot dip galvanized with bottam dia 360mm top dia 150mm,thickness not less than 5mm completre with all accessories.Mast shaft shall be inh single section,hot dip galvanized and suitable for wind velocity as per IS;875 Part 3 along with the following for each High Mast as per specification enclosed

Head frame: 2 way Winch with gear ratio of 50:1 bobin set (6mmdia) chain ,sporocket and handle :750kg Wire rope of 6mm dia :53 mtr Lighting arrestor:.8 mtr long Winch and motor mounting bracket :01 set Thimble(06 mm dia rope) and D Clamp(for 06mm dia rope):08 set Number of section :02 Material of construction:S Grade as per BSEN10025 Plate thickness:3mm Cross section of MAST: 16 side polygon Standard for galvanization :as per BSEN ISO 1461 Size of opening and door at base:600x250mm Diameter of base plate:560mm Lightning protection finial:GI Single spike of lengthy 800mm Maximum wind speed :50m/s as per IS 875 PART III Number of foundation bolts :06 nos PCD Of foundation bolts:460mm Type /dia/lenghth of foundation bolts: TS/24MM DIA/850mm long Welding ;double longitudinal weld

LUMINARIES CARRIAGE Material of construction ;40NB ERW class B MS pipe Diameter of carriage ring(mm) : 710mm (ID) Construction :08 arm ,welded ,2 section Load carrying capacity :08/16 luminarie

TRAILING CABLE Conductor :copper 04 core 2.5 sqmm WINCH/POWER TOOL Type/SWL of winch :double drum.SWL 750KG Method of operation :01 HP,3 PHASE NO OF POLE/SPEED: 06/SINGLE SPEED STAINLESS STEEL WIRE ROPE Grade/construction :AISI 304,7/19 Construction Number of ropes: two continuos Diameter (mm) :06mm Breaking load capacity :2350 kg

Luminaries with control gear Wattage :180/200 watt Type ; flood LED TYPE LED make ;nichie/cree equivalent Number of luminaries and control gear of 180/200 wattage per high mast :06 Warranty :02 year Temperature :3k Type: warm light Lumens> 8400lm CRI >70 Lamp life >50000hr Colour /temperature :3000k Light :warm yellow colour Beam angle :45 degree Rated input voltage :240 volt Frequency :50hz Voltage withstand range:120VAC-300VAC IP:IP65 Electronic Driver :integral UV AND IR Radiation :NO Make of luminaries Crompton,Philips,bajaj and equivalent

Foundation and aviation light. Providing and laying in position 1:2:4 reinforced cement concrete foundation of size 01 mtr (L) X 01 mtr wide and 02 mtr deep I/c excavation of earth, providing, cutting, reinforcement of cold twisted bars of 12 mm dia-2100mm long (approx) -10 Nos. and reinforcement ring of cold twisted bar of 8mm dia-4100mm (approx) -13nos. (with 150mm spacing) as required with positioning of foundation bolts (as per item above) as shown in the item above and providing 90mm (O.D.) DWC, HDPE pipe for cable entry & exit as required. Supplying and fixing 06 Nos. 25mm dia x 750mm long GI foundation bolt (EN8 grade) with nuts , washer including 02 Nos. template of 04mm thick size 540mm x540mm with 06 Nos. 28mm dia holes, to match with Octagonal High Mast Base plate as regd. (each High Mast) ,Aviation obstruction lighting system complete -01 set (Each High Mast)

Panel with 3 kva servo transformer Supply, erection and commissioning of 4 way LT control panel in IP54 construction along with 01 NO of 3kva servo transformer with inpit voltage of 90 to 260 volt and gives constant voltage of 233 output , 01 No., of time switch and 01 No. of 32A 4 pole, 15 KA MCCB and 01 No. of 32A 3 pole modular contractor with all accessories-02 sets.,as desired by site engineer High powered non-=reversible power tool complete with all accessories-01 set (Each High Mast)

EARTHING Chemical earthing with 2 mtr rod of electrolyte and 25kg of earthing chemical of approved form

Cable for luminaries from panel: flexible 3 core 2.5 sqmm copper type with pvc sheathed armoured cabel (kei,havell,polycab) cost include supply,installation testing .commission ,head load ,mechanical load and other miscellaneous charges at site Complete job with two year warranty. Make of high mast; bajaj/Crompton/oswal/ equivalent firm

Design,fabrication,erection and commissioning of 16mtr mtrs,long octagonal High Mast system,hot dip galvanized with bottam dia 360mm top dia 150mm,thickness not less than 5mm completre with all accessories.Mast shaft shall be inh single section,hot dip galvanized and suitable for wind velocity as per IS;875 Part 3 along with the following for each High Mast as per specification enclosed

Head frame: 2 way Winch with gear ratio of 50:1 bobin set (6mmdia) chain ,sporocket and handle :750kg Wire rope of 6mm dia :68 mtr Lighting arrestor:.8 mtr long Winch and motor mounting bracket :01 set Thimble(06 mm dia rope) 92 and D Clamp(for 06mm dia rope):08 set Number of section :02 Material of construction:S Grade as per BSEN10025 Plate thickness:3mm Cross section of MAST: 20 side polygon Standard for galvanization :as per BSEN ISO 1461. Size of opening and door atbase:800x300mm Diameter of base plate:560mm Lightning protection finial:GI Single spike of lengthy 800mm Maximum wind speed :47m/s as per IS 875 PART III Number of foundation bolts :08 nos PCD Of foundation bolts:460mm Type /dia/lenghth of foundation bolts: TS/24MM DIA/850mm long Welding ;double longitudinal weld

LUMINARIES CARRIAGE Material of construction ;40NB ERW class B MS pipe Diameter of carriage ring(mm) : 710mm (ID) Construction :08 arm ,welded ,2 section Load carrying capacity :08/16 luminarie

TRAILING CABLE Conductor :copper 04 core 2.5 sqmm WINCH/POWER TOOL Type/SWL of winch :double drum.SWL 750KG Method of operation : integral operation motor flameproof01 HP,3 PHASE NO OF POLE/SPEED: 06/SINGLE SPEED STAINLESS STEEL WIRE ROPE Grade/construction :AISI 304,7/19 Construction Number of ropes: two continuos Diameter (mm) :06mm Breaking load capacity :2350 Kg

Luminaries with control gear Wattage :350 watt Type ; flood LED TYPE LED make ;nichie/cree equivalent Number of luminaries and control gear of 350/400 wattage per high mast :08 Warranty :02 year Temperature :3000k Type: warm light Lumens> 36750 lm Efficacy lm/w>105 CRI >70 Lamp life >50000hr Colour /temperature :3000k Light :warm yellow colour Beam angle :45 degree Rated input voltage :240 volt Frequency :50hz Voltage withstand range:120VAC-300VAC IP:IP65 Electronic Driver :integral UV AND IR Radiation :NO Make of luminaries Crompton,Philips,bajaj and equivalent

Foundation and aviation light Providing and laying in position 1:2:4 reinforced cement concrete foundation of size 01 mtr (L) X 01 mtr wide and 02 mtr deep I/c excavation of earth, providing, cutting, reinforcement of cold twisted bars of 12 mm dia-2100mm long (approx) -10 Nos. and reinforcement ring of cold twisted bar of 8mm dia-4100mm (approx) -13nos. (with 150mm spacing) as required with positioning of foundation bolts (as per item above) as shown in the item above and providing 90mm (O.D.) DWC, HDPE pipe for cable entry & exit as required., Supplying and fixing 06 Nos. 25mm dia x 750mm long GI foundation bolt (EN8 grade) with nuts , washer including 02 Nos. template of 04mm thick size 540mm x540mm with 06 Nos. 28mm dia holes, to match with Octagonal High Mast Base plate as regd. (each High Mast) ,Aviation obstruction lighting system complete -01 set (Each High Mast)

Panel with 3 kva servo transformer Supply, erection and commissioning of 4 way LT control panel in IP54 construction along with 01 NO of 3kva servo transformer with inpit voltage of 90 to 260 volt and gives constant voltage of 233 output , 01 No., of time switch and 01 No. of 32A 4 pole, 15 KA MCCB and 01 No. of 32A 3 pole modular contractor with all accessories-02 sets.,as desired by site engineer High powered non-=reversible power tool complete with all accessories-01 set (Each High Mast)

EARTHING Chemical earthing with 2 mtr rod of electrolyte and 25kg of earthing chemical of approved form

Cable for luminaries from panel: flexible 3 core 2.5 sqmm copper type with pvc sheathed armoured cabel (kei,havell,polycab) cost include supply,installation testing .commission ,head load ,mechanical load and other miscellaneous charges at site with two year warranty. Complete job Make of high mast; bajaj/Crompton/oswal/ equivalent firm

Supply, Installation testing and commission of three phase pole mounted substation consisting of DY11, level 2, copper bounded,0.11/0.433KV,25 KVA distribution transformer with bimetallic terminal connectors,03 numbers of 9KV lightening Arrester,01 set of 11KV G.O switch,01 set of 11KV DO fuse, 02 number of 09 meter long HT pole ,03 number of 11KV disc insulators complete with fitting,200 kgs of GI channel/angle/flat of sizes including clamps,08 kgs of galvanized nuts and bolts, Chemical Type earthing with 3 MTR 50 MM GI electrode with Connection of panel/high mast with 25x3 mm GI Strip Make JMV/GMAX/OBO with CPRI Approved and NABL certified Test Report . 03 number of 11KV pin insulators with pins,01 set of LT distribution Box with mounting clamps for 11KVA DTR with provision for MCCB on three outgoing circuits,02 set of GT stay set(complete with stay wire clamps nuts and bolts,guy insulators and concreting) 06 number of wedge connectors/PG clamps,02numbers of anti climbing device with clamps,03 number of earthing set complete (earthing rod with GIwire for earthing of poles and fittings),01 number of meter box with resin cast ring type CTS for DT metring, 01 No of prodojy three phase meter on LT side,02 number of cement bottoming,02 litre of red oxide,02 litre of aluminium paint,01 set of sundry items like aluminium lugs,jumpers,binding tape,including cost of bottoming of pole and erection of poles ,06 numbers of channels for supporting 25 KVA transformer with LT armoured cable of 95 sqmm single core from 3 phase and neutal of transformer LT end to panel incomer of 100 amp MCCB ,danger plate 01 nos.,etc. Warranty 02 year. Cost includes head load, mechanical load and other miscellaneous charges Bharti ENGINEERS, ,continental,electricfield equivalent NABL approved

Supply and laying of 16 sqmm 4 core XLPE ,PVC sheathed aluminum armoured cable in suitable HDPE pipe in under ground /overhead as per site engineer ,including cost of digging trench and refilling of trench , fixing on mountain wall firmly by using clamps by drilling machine as per site requirement plus other miscellaneous charges (havell,ploycab,kei)

Providing and laying of 70 sqmm 3.5 core pvc sheathed xlpe armoured aluminium cable to be layed underground/overhead in suitable size of HDPE/DWC pipe in depth of 01 metre under ground including cost of digging and refilling of trench /pit for cable laying.

Providing and laying of 3 core 50 Sqmm, 11 KV HT armoured cable Make Havell, Kei,

Supply and laying of GI 1.5 inch Dia at Road crossing

Supply installation testing and commission of embedded signage with following technical specification Aluminium channel or 1finch square MS pipe of 18guage ,3inchACF sheet (aludecor/ flexbond/ alucobond/ ecrobond/ virgo) ACP board with2 inch suare MS pipe of 18 guage logo 5M 040 ACRYLIC SHEET used in orange 3m -4630-44 vinyl cut/as base signage Xiaomi vernacular and english letter router cut in ACP,LED module powered by Samsung/hisign/star tech/sign tek (120 watt 3 in one or 2 in one LED module,100 lumen per module, spread area 155 degree along with lens on top, spotless glow ,6000 to 6500 Kelvin colour temperature IP 67 grade module/68 grade power supply retailer same in English and regional language letter back with 3mm acrylic 040 acrylic sheet, LED module powered by Samsung/hitech/ star tech/interone (1.20 watt 3 in one or 2in one led module,100 lumen per module, spread area 155 degree with lens on top for the spotless lens glow,6000 to 6500k colour temperature IP 67 grade module and water proof IP 67/68 grade power supply with rain proofing along with iron angle for holding sign board with 6 inch round pipe at height of 7 feet from ground duly fixed with nut bots and RCC of ratio 1;3;6(CEMENT:SAND:AGGREGATED STONE) up to depth of 01 meter down from ground level and other steel required for erecting pole firmly for supporting wind speed of 80m/s in addition cost of 30 mtr 1.5 sqmm single core cable and 4 sqmm of 20 mtr with 08 module GI box and module base and cover plate for holding 05 amp switch and socket and 15 amp switch and socket Complete job Warranty 01 year

Providing and erection of HTpole of 09 meter along with clamps/bracket for supporting ABC HT cable, bottoming of pole by ratio of (1:3:6) (cement:sand:aggregated stone ) and earthing of pole by GI wire of SWG of 08 number

Supply, erection, testing and commission of 2.6 Mtr (2600mm) height decorative pole made of total cost iron along with base plate of 310 mm round and height of 2.6 mtr. with costed design of flower costing on pole, thickness of the pole should be greater than 3mm suitable for decorative LED based circular round based post of OD (400mm dia) and 225 mm height as specified with 35/40 watt ( warm white-3000k) led, technical specification of LED light are Aluminium housing, integrated with extruded aluminium pipe along with die cast aluminium base through supporting arms made of mild steel. • Diffuser placed into the provision formed on the pheriphery of the bottom cover. • Non yellowing UV stabilized translucent acrylic diffuser. • Low power loss LED driver with 40W LED. • Suitable for mounting on 60mm OD pipe. • Cable entries for through-wiring of mains supply cable • Integral power supply • Earth connection • Safety class I • Protection class IP54 • Suitable for operation on 240V, 50Hz single phase ac supply. Make of Light Havells, Philips, Cromption, Bajaj or equivalent with 2 year warrenty of light with service window at bottom comprising of 4 way 25 amp connector capacity for loop in loop out arrangement along with wire of flexible 3 core of 1.5 sqmm copper wire of 03 mtr for each pole and MCB of suitable capacity , pole shall be installed on pre laid concrete block of ratio 1:2:4 ( cement:sand: aggregated stone) of size 2x2 sft or round shape, 2.5 ft above the ground, 01 mtr depth with ground ,including cost of digging pit and refilling back and making the same as of initial position before commission of work also including the cost of cutting of surface/path tile and making /fixing the same by new one and ny other item required to execute but not mentioned may also be taken into account rest as specified by site engineer Make of Pole and Light Philips, Havell, GE or equivalent

Supply installation testing and commission of MI logo pop out with technical specification of grade matte stainless steel 1mm thickness laser cut 50mm projection /without projection with stainless steel strip, manual bending 040 Acrylic (UB acrylic) laser cut Samsung power by LEDs with 3 year warranty IP65 rated power supply 1.5x wire ( Polycab) orange vinyal 3M3630-74with suitable 3 module GI box alogn with Modular Plate and base cover of suitable site and 56 Amp switch socket with other accessories for fixing the same on wall / chennel ewtc as required as per instructions of Engineer Incharge

Manohar Kumar

A G ELECTRICALS

RAVISUN ELECTRICALS

TUSHAR JANDIAL GOVT CONTARCTOR

AJAY CONSTRUCTION

RATTAN CHAND GOVT CONTRACTOR