ADDN ALTN AND UPGRADATION OF BLDG NO T 46 AT JALIPA MIL STN UNDER GE ARMY BARMER

Amount

M&L for surface dressing n exc. 15cm deep in hard/dense soil complete all as specified and directed.

M&L for excavation in trenches not exc 1.5 mtr wide and n.exc. 1.5 mtr in depth for foundation etc. for shafts, wells, manholes etc. n.exc 10 Sqm on plan and n.exc 1.5 mtr in depth and getting out in hard/dense soil complete all as specified and directed.

All as per srl item no 03 above but depth exc. 1.50 mtr but n.exc. 3.00 mtr complete all as specified and directed.

M&L for demolition of brickwork or stone/ boulder masonry, built in cement mortar, incl all quions, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for brickwork with old size fly ash bricks, for masonry straight or curved on plan, built in and setting in mortar 1:4 complete all as specified and directed.

M & L for providing cement concrete type B-1 (1:2:4) (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands complete all as specified and directed.

M&L for 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L for concrete bed to 150mm bore drain pipes including packing under, haunching against the sides of pipes after they are laid and tested, in cement concrete 1:3:6 type C-2 complete all as specified and directed.

M&L for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizontal or sloping) for flat rough finished surfaces of concrete complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for flat rough finished surfaces of concrete complete all as specified and directed.

M&L for RCC M-25 (Des Mix) (20mm graded crushed stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC (1:2:4) type B1 (using 20mm graded stone aggregate) precast cement concrete cover slab for manhole and similar article with plain face, set in cement mortar 1:4 complete all as specified and direceted.

S&F for 16mm dia mild steel bars for handles of manhole cover and rungs of manhole complete all as specified and direceted.

M&L for 15mm thick rendering in cement mortar 1:4 inside and outside wall of manhole of brick work/ concrete surface and finishing even and smooth without using extra cement mortar as per manufactures instructions complete all as specified & directed. Note :- WPC shall be measured & paid separately under relevant items.

Supply only water proofing liquid.

M&L for extra forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitered/ stopped ends etc complete all as specified and directed.

M&L for excavating in post holes (or similar holes) in hard/dense soil, each not exceeding 0.5 cum, in hard/dense soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering and removing surplus soil complete all as specified and directed.

M&L for PCC (1:2:4) type B1 using 20mm graded stone aggregate as in foundation filling in post holes complete all as specified and directed.

M&L for preparation of surfaces new steel & iron of any description, not otherwise described, over 10cm width or girth and applying 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for brickwork with old size fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in and setting in mortar 1:4 complete all as specified and directed.

M&L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

Material and labour for rendering external and internal 15mm thick in CM 1:4 on brick or cement concrete surfaceS&Finished even and smooth without using extra cement complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for broken stone or boulders hardcore of gauge n. exc. 63mm, deposited spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surfaces complete all as specified and directed.

M&L for 75mm thick cement concrete 1:4:8, type D-2, (40mm graded aggregate) as in sub base floors complete all as specified and directed.

M&L for 100mm thick cement concrete type B-2 1:2:4, (40mm graded aggregate finished even and smooth without using extra cement as in flooring complete all as specified and directed.

M&L for dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

M&L for demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for non skid joint free coloured ceramic tiles 7mm thick of size 300mX300mm in floor set and jointed in cement clurry and pointed with coloured cement to match with coloured tiles over and including cement screed or bedding layer of cement mortar 15mm thick in 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 350x250x7mm/ 450x350x7mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and above 10mm thick cement plaster in 1:3 as backing coat complete all as specified and directed.

M&L for vitrified ceramic colour tiles 9 to 10mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including cement screed or bedding layer of cement mortar 15mm thick in 1:4 complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls applying two coat of plastic emulsion over a coat of primer over a coat of 1mm thickness putty over plastered/uneven surface to prepare the surface even and smooth complete all as specified & directed.

M&L for preparation of new plastered surfaces of walls applying two coat of acrylic emulsion paint over a one coat of primer complete all as specified & directed.

M&L for taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified & directed.

M&L for taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified & directed.

S&F powder coated aluminium section for door frame, windows, ventilators, with one or more rebates, including joining cleats for fixing necessary lugs complete frame work complete all as specified & directed.

S&F powder coated aluminium section for door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, powder coated aluminium shap beading screws etc complete all as specified & directed.

S&F powder coated aluminium section for window and ventilator sliding type without sash bar aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium shap beading screws, powder coated aluminium fittings such as peg stays 150mm long ( 1 Nos) hinges type B-21 100mm long (2 Nos) suitable handle 1 Nos complete all as specified & directed.

S&F powder coated aluminium grill for window/ventilators of mesh size 50 x 50mm and made out of 4mm thick aluminium podwer coated sections including necessary fitting arrangements of approved design/pattern complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F 4mm sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq m each pane complete all as specified and directed.

S&F 3mm thick figured galss, pin head type as in louvers, fixed glazing not exc 0.5 Sqm in each panel complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing tied to the wall using 75/100mm long MS screw directed complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. M S tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS fram welded/sealed to the stile and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed.

Supply and fixing 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 100mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22 complete all as specified and directed.

Supply and fixing 150mm long extruded alluminium alloy handle, cast type, anodized complete all as specified and directed.

S&F 100mm aluminium anodised barrel tower bolts, of extruded section complete all as specified and directed.

S&F 25mm dia anodised aluminium anodised powder coated tubular curtains rod including fixing brackets complete all as specified and directed.

M&L for dismantling wall and ceiling boarding of any description, thickness including cover fillets of any description complete al as specified and directed.

S&F hangers 6mm dia. G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete al as specified and directed.

S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves andscrews at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section(not exc 1.2 m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.

M&L for providing and fixing gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in bed blocks including necessary formwork complete all as specified and directed.

M&L for dismantling wrought iron or mild steel work of any description not otherwise provided for complete all specified and directed.

S&F for steel work in tubular trusses, post, purlin, rafter including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe 410-W (Gde E-250) quality A complete all as specified and directed.

S&F MS for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F MS plain black sheet 1.25mm thick in hearths; covering to door shutters; covering to door chowkats (frames);chullah hoods; watertanks; water troughs;ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed., holes punched;including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed.

M&L for dismantling of plain or corrugated steel sheets in roof coverings any type complete all as specified & directed.

S&F pre-laminated galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering in any curvature, fixed with self tapping screws complete all as specified & directed.

S&F 0.63mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 as in roof covering in any curvature complete all as specified & directed.

S&F in repairs 20mm CPVC Pipe SDR 11 & plain CPVC SDR 11 fittings such as tee, elbow, nipple and small piece of pipe in trenches or fixed to wall/ceiling complete all as specified and directed.

S&F in repairs 25mm CPVC Pipe SDR 11 & plain CPVC SDR 11 fittings such as tee, elbow, nipple and small piece of pipe in trenches or fixed to wall/ceiling complete all as specified and directed.

S&F in repairs vitreous china wash down water closet (European type) (floor hung (pedestal pattern) white complete excluding flushing cistern and flush pipe and trap white including fixing bolts, WC seat cover of fixed with aluminium or ms chromium plated complete all as specified and directed.

S&F vitreous china wash down water closet (European type) (floor hung (pedestal pattern) white complete excluding flushing cistern and flush pipe and trap white including fixing bolts, WC seat cover of fixed with aluminium or ms chromium plated complete all as specified and directed.

S&F in repair flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type,, low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete all as specified and directed.

S&F in repair for PVC low level flushing cistern, white, 10 Ltrs capacity complete with all internal accessories fixed to wall & making good to wall surfaces complete all as specified and directed.

S&F in repair PVC connection 600mm long and 15mm dia with brass fly nut at both ends complete all as specified and directed.

Supply only PVC connection pipe 15mm dia and 600mm long with two PTMT nuts at each ends with rubber washer complete all as specified and directed.

S&F in repairs health faucet (ABS Body ) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F health faucet (ABS Body ) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs stop valves/angle cocks or two way angle cock cast copper alloy concealed type long body with round operating knob fency type chromium plated screwed down high pressure, screwed both ends for 15mm bore iron pipe or brass ferrule complete all as specified and directed.

S&F stop valves/angle cocks or two way angle cock cast copper alloy concealed type long body with round operating knob fency type chromium plated screwed down high pressure, screwed both ends for 15mm bore iron pipe or brass ferrule complete all as specified and directed.

S&F in repairs vitreous china wash hand basin, angle back 550 x 400mm white excluding taps, waste chains and plugs and porcilain stopper but including bracket complete all as specified and directed.

S&F vitreous china wash hand basin, angle back 550 x 400mm white excluding taps, waste chains and plugs and porcilain stopper but including bracket complete all as specified and directed.

Supply and fixing in repair of fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shank with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F 15mm bore fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs of 32mm waste coupling of PTMT (half or full threaded) for kitchen sink complete all as specified and directed. (Minimum weight 32mm-45gms/40mm-60 gms

S&F 32mm dia of discharge pipe as waste coupling of PTMT complete all as specified and directed.

S&F in repairs 32mm low density polyethylene pipes (LDPE) of pressure rating 6kgf/cm2 fixed to walls, ceilings or in floors as in waste pipe etc complete all as specified and directed.

S&F 32mm low density polyethylene pipes (LDPE) of pressure rating 6kgf/cm2 fixed to walls, ceilings or in floors as in waste pipe etc complete all as specified and directed.

S&F in repairs stainless steel gratings with frame, 150mm dia, with hole for waste pipe connection complete all as specified and directed.

S&F Grating 150mmx150mm made out of stainless steel complete all as specified and directed.

S&F Grating round 150mm with waste hole made out of stainless steel complete all as specified and directed.

S&F in repairs chromium plated fancy type bib taps with wall flange, cast copper alloy with round operating knob screwed down high pressure, screwed for 15mm bore iron pipe complete all as specified and directed.

S&F chromium plated fancy type bib taps with wall flange, cast copper alloy with round operating knob screwed down high pressure, screwed for 15mm bore iron pipe complete all as specified and directed.

S&F of vitreous china bowl urinal flat back, size of 465 x 355 x 265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe andwaste pipe) complete all as specified and directed.

S&F vitreous china urinal partition white of size 310x700mm complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and directed.

S&F 20mm outer dia ball/gate valve for, screwed both ends for CPVC pipes and fixed complete all as specified and directed.

S&F ball valves high 20mm bore pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls or laid in floors etc complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls or laid in floors etc complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repairs PVC (SWR) bends 110mm dia any radius complete all as specified and directed.

S&F PVC bends of 110mm dia complete all as specified and directed.

S&F in repair PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc complete all as specified and directed.

S&F PVC (SWR) floor trap, plain including jointing with solvent cement bends of 75mm dia complete all as specified and directed.

M&L for 60mm machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and directed.

M&L for sand filling under floors as in sand cushion for laying paver blocks including water and consolidation complete all as specified and directed.

M&L for returning, filling in, including spreading, leveling, watering & well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed.

M&L for removing excavated material n. exe. 50m but n exc. 500m & deposited where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

Material and labour for sand cushioning for under ground cables, spread in trenches, river sand including cleaning, spreading levelling, punning for laying/cushioning of cable all as directed. with layer of 8 cm deep before laying cable and 15 cm depth after laying and stretching the cable complete all as specified and directed. Note: For the Purpose of payment puned thickness shall be measured.

Supply and laying unreinforced precast concrete cable cover, class LV, Type 1 flat, size 250 mm x 150 mm x 40 mm as mechanical protection to underground cables laying with length of the cable cover equal to the width of the trench complete all as specified and directed.

Supply, laying, connecting, testing and commissioning of XLPE insulated, earthed, screened, PVC bedded, galvanised steel strip or wire armoured electric (heavy duty) stranded aluminium conductor 1100 volts grade having cross sectional area of 10 sqmm 2 core complete all as specified and directed.. Note: 1. Exacavation, earth work, sand, bricks and PCC will be measured and paid under relevant items.

Supply and lay pipe galvanized, “Medium class”, including fittings 40 mm dia complete all as specified and directed.

Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm (1.0”) dia complete all as specified and directed.

M&L for 40 mm bore gun metal, gate valve with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed.

M&L for 25 mm bore gun metal, gate valve with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed.

M&L for construction of brick masonry valve pit of size 60cm x 60cm X 60 cm (internal dimensions) with one brick thick wall in cement mortar 1:4 on 100mm thick PCC 1:4:8 type D2 ( using 40mm graded broken stone aggregate) as in foundation lean concrete, including PCC 1:3:6 type C-1 ( using 20mm graded crushed stone aggregate) as in benching and coping and 10mm thick cement plaster in CM (1:4) internally and externally upto 15cm below ground level providing valve pit cover 40x40x6mm angle iron frame all-round fixed by means of 4 Nos holdfast 150mm long made out of flat iron 40x6mm embedded in PCC block (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) of size 230x200x100mm incl provn of hinges welded with angle iron frame and MS cover 3mm thick sheet, MS handle of suitable length and size welded with MS cover and suitable locking arrangement and applying two coats of synthetic enamel paint over a coat of red oxide primer including necessary excavation and earth work in soft/ loose soil all as shown on drawing complete all as specified and directed.

M&L for making connection of GI pipe line from existing any size GI/CI/DI pipe line upto 100 mm by cutting/ tapping/ drilling of bore of suitable size including Rubber sheet, clamps, nut bolts etc and checking of flow complete all as specified and directed.

m/s sai construction company,bijarar (BID ID -3168214)

Lalit and Brothers (BID ID -3167955)

M/S TANUSHREE CONSTRUCTION COMPANY (BID ID -3167984)

M/s Malinath Electricals (BID ID -3168823)

M/S Tanisha Traders (BID ID -3166180)

M/s Sati Jasnath Enterprises (BID ID -3165148)

RAMDEV ENTERPRISES (BID ID -3167819)

M/S PRASHANT BENIWAL (BID ID -3168563)