REPAIR TO AREA, DRAINAGE, PATH HARD STANDING, FENCING AND SECURITY WALL AND MISC WORK AT MD ACCN AND OTM ACCN OF KANDIVALI AND MALAD UNDER GE (NORTH) MUMBAI

Amount

Demolition of brick work/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 1 above but dismantling only

Material and labour for Plain Cement Concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation / mass concrete/filling complete all as specified and as directed by the Engineer-in-charge

Material and labour for brick work with sub class 'B' bricks, straight or curved on plan, exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 4 above but except brick(old brick to be re used in this items)

Material and labour for walling random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 6 above but except stone (old stone to be re used in this items)

M & L for cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in surface channels and drains, benching, haunching etc. including necessary form work for fair finished surfaces complete all as specified and as directed.

Material and labour extra for forming fair finished drain or channel 30cm inner girth in cement concrete with using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.

Material and labour for 15 mm thick plastering in cement mortar (1:6) on brick/ concrete surfaces & finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for raised pointing to random masonry, uncoursed, in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.

Material and labour for flush pointing to random rubble , uncoursed or brought up to course, in cement mortar (1:4) complete including saftey arrangements/formwork/staging to work in sloped terrain all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including tiles and removal of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 75 mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in flooring, path/hardstanding and finishing the surface even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for sand cushioning, 25mm thick including watering and consolidation complete all as specified and as directed by Engineer-in-Charge.

Material and labour for machine pressed precast concrete interlocking paver block, of any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete all as specified and as directed by Engineer-in-Charge. Make: Mehtab Tiles/Indore/M/S Ultra Tiles/NITCO/Topaz Tiles/Navya Tiles Jodhpur

M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge

Material and labour for 15 mm thick plastering in cement mortar (1:6) on brick/concrete surfaces & finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of old plastered wall surface and applying two coats of Acrylic weather proof coat 100% exterior grade paint over one coat of acrylic primer upto a height of bldg roof including formwork/scaffolding/ladders and safety belts with precautions etc complete all as specified and as directed by Engineer-in-Charge. Make : APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India

Material and labour for complete removal of existing treatment of plastered wall surface and applying two coats of cement base paint as per manufacturer's recommendation complete all as specified and as directed by Engineer-in-Charge. Make : Super Snowcem/ Duracem/ Aquacem/ Shalimar/ Berger/Birla Opus Paints

Material and labour for complete removal of existing treatment of plastered wall surfac and applying two coats of Acrylic weather proof coat 100% exterior grade paint over one coat of acrylic primer complete all as specified and as directed by Engineer-in-Charge. Make : APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India

Material and labour for preparation of new plastered surfaces of wall & applying two coats of cement based paint over a coat of primer complete all as specified and as directed by Engineer-in-Charge. Make : Snowcem/Duracem/Aquacem/Berger/Shalimar / Birla Opus Paints .

Dismantling wrought iron or mild steel work of any description not otherwise provided for & removing clear off site complete all as specified and as directed by Engineer-in-Charge.

Material and labour for rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantries, rails, and fastenings and heavy bracket framing, (beam, tee, angle, channels or flat sections) including notching, drilling, fitting, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts) conforming to Fe 410 W Gde E- 250, Quality B complete all as specified and as directed by Engineer-in-Charge.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridges & removing clear off site complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge. Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets/TATA

Dismantling fencing wire mesh complete all as specified and as directed by Engineer-in-Charge.

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in concrete, including taking out embedded portion and making good disturbed ground complete all as specified and as directed by Engineer-in-Charge.

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and removing surplus soil to a distance not exceeding 50 m and depositing where directed and making good the disturbed surface complete all as specified and as directed by Engineer-in-Charge.

M & L for PCC 1:3:6 Type C-2 using 40 mm gradded aggregate Cement concrete in foundations, filling and mass-concrete complete all as specified and directed

Supply and fix Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to conforming to Fe-290 Grade E-165 complete including all as specified and directed by Engineer in charge.

Material and labour for Mild Steel screw bolts(Machine made), with hexagonal or square heads at one end and to be fitted with washers exceeding 5cm and not exceeding 10cm long, dia of neck 11 to 16mm complete all as specified and as directed by Engineer-in-Charge.

Supply only mild steel round bars 10mm dia and over as line bars for fixing chain link fencing cut to length bent to shape required including cranking hooking ends etc complete all as specified and as directed by Engineer-in-Charge

Supply only Chain link fencing of size 50mmx50mm mesh size made of 10 gauge GI wire, streched and fixed to fencing post all as specified and directed by Engineer-in-Charge.

Fixing only chain link fencing including line wires, any mesh, stay type to any type of standards, rails, staining bolts etc including cost of binding wire complete all as specified and directed by Engineer-in-Charge.

Material and labour for galvanized 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provn of galvanized mild steel wire staples or steel pins etc as directed (each line of wire to be measured), complete all as specified and as directed by Engineer-in-Charge.

Restraining &rescuring of existing galvanized 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to existing loose barbed wire and any any type standard rails, straining bolts, including securing or tying at crossing with and provn of galvanized mild steel wire staples or steel pins etc complete all as directed (each line of wire to be measured)and as specified and as directed by Engineer-in-Charge.

Clearing the area/site including cutting of bushed/shrubs etc and making good the site , complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to conforming to Fe-290 (Gde-E-165) quality-B complete all as specified and directed by Engineer in charge.

Material and labour for MS framed work such as grills , gratings, brackets of chajja etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, framed work of garbage bin, barred iron doors, ladders, framed balusters, walk ways, railings, framework of watertanks and similar work conforming to FE 290 Gde 165 etc. complete all as specified and as directed by Engineer-in-Charge.

Material and labour for providing cement concrete type B1 1:2:4 (using 20mm graded crushed aggregate) in window or door cills, lintels, bressumers, steps, quions, (in masonry) string courses, coping, kneelers, apex stones, pier caps, column boundary pillars, bed plates, pintle blocks, anchorage blocks, boundary (or walling) corbels, brackets, etc. (of any section indicated) with plain fair face, including chamfers, weathering, throating, etc. and setting in cement mortar, complete with joints to match with cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparing new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying twocoats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed by Engineer-in-Charge. Make : Asian paints/ Nerolac paints/Berger paints/ Shalimar paints/ Dulux/Birla Opus

Material and labour for Preparation of old painted steel surfaces of any description over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. Make: Berger paints/Asian paints/Shalimar paints/Birla Opus

Supply and fix razor type concertina coil, SG hot galvanized spring tensile wire, 145 to 150 newton per sqmm, zinc coating 250-300 gm per sqm, dia of coil when unstreched 600mm, minimum No of coils 10 per running meter after laying, hot dipped razor ribbon tape of size 0.50 mm thick, 19mm wide before wrapping on central core wire, fixed with 1.66 mm thick GI clips 25 Nos, per running metre and special nut bolts for holding 'Z' coils together and extra two rows parallel wire of 10 gauge complete all as specified and as directed by Engineer-in-Charge Note :- The length shall be measured along the centre-line of the perimeter of fencing.

Material and labour for granite 15-16mm thick, machine cut (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform, bedded and jointed with grey cement (1:4) slurry and pointed with white cement(1:2)using marble dust with admixture of pigment to match the shade of granite stone including necessary molding of edges as required at site including grinding and polishing, over and including 15mm thick cement mortar (1:4) complete all as specified and as directed.

All as per Sl item No. 46 above but except stone complete all as specified and as directed.

Material and labour for precast cement concrete block masonry with PCC solid blocks in 1:3:6 type C-1 using 20mm graded stone aggregate, exceeding 10cm in width and set in cement mortar 1:6 complete all as specified and as directed.

M&l for providing precast cement concrete louvers and jalies 25mm (solid) including all mouldings but excluding frame(pre cast frame measured separately and paid for under respective item

Material and labour for chequered cement concrete tiles (glossy finish) 20cm x 20cm x 25mm thick with grey cement and no pigments, set, jointed and pointed in neat cement slurry in floors including 20mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. Make- (a) M/S Mehatab Tiles, Indore (b) National Tiles(c) Bharat Tiles and Engg Coy, Bangalore (d) Modern Tiles and Marbles Bangalore (e) M/s NITCO, Mumbai (f) Ultra (g) Duracrete

Material and labour for 100mm thick Plain Cement Concrete 1:2:4 type B1, using 20mm graded stone aggregate as in floor/ hard standing/ path and finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge

Material and labour for forming 20mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ for slab thickness of concrete slab 100mm complete all as specified and as directed by Engineer-in-Charge.

Material and labour for forming contraction (Dummy) joints, 25mm deep x 10mm wide, filled with sealing compound Gde ‘A’ complete all as specified and as directed by Engr-in-Charge.

Supply and fix Chain link fencing of mesh size 50mmx50mm and 3mm thick as approved including taking down existing damage barbed wire/ chain link fencing round bar, wiithout dismantling of existing RCC/MS angle iron fencing post all as specified and directed by Engineer-in-Charge.

Refixing/reuse old round bar and flat iron obtained from Item No. 54 above complete all as specified and as directed by Engr-in-Charge.

Restraining & resecuring only including making good staples etc to old existing loose /bend existing chain link fencing complete all as directed by Engineer in Charge.

Refixing/resecuring/erecting old displaced/bend angle iron fencing post by placing PCC 1:3:6 type C2 (Using 40mm graded aggregate) including demolition of existing PCC around fencing post complete all as specifie

Note: Deduct Credit for demolished / dismantled material of Rs. (-)92,200.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'

Vishal Builders (BID ID -3454971)

mp construction co (BID ID -3461846)

KAJAL CONSTRUCTION (BID ID -3456455)