ADDITION /ALTERATION /REPAIR TO EXISTING OLD LIBRARY AT 2ND FLOOR MAIN BUILDING FOR THE GROUP ACTIVE PROTECTION SYSTEM (APS) AT ARDE, PASHAN PUNE

Amount

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by Engineer-in-charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter of area 3 sq. metres and below including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead complete all as specified and directed.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be Powder coated (minimum thickness of powder coating 50 micron) smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

Providing and fixing powder coated aluminium work for shutters of doors, windows & ventilators, (minimum thickness of powder coating 50 micron) including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required complete all as specified and directed by Engr-in-Charge.

Providing and fixing 12 mm thick prelaminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc, complete all as specified and directed of engineerin-charge.

Providing and fixing fly proof stainless steel with 0.5mm dia wire with average width of aperture 1.4mm in both directions with matching wood/aluminium as per requirement beading to aluminium doors, windows and clerestory windows complete all as specified and directed.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc With tinted glass panes of 4.0 mm thickness (weight not less than 12.50kg/sqm) with EPDM rubber / neoprene gasket etc. complete as per the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)

Supply and fix Sheet glass 4.00mm ordinary quality and glazing with clips/rubber beading in square exc 0.5 sq. m in each pane fixed to window shutter complete all as specified and directed.

Providing and fixing double action hydraulic floor spring with stainless steel cover plate minimum 1.25 mm thickness of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. complete all as specified and directed.

Providing & Fixing of Armstrong Mineral Fibre Acoustical Ceiling System with SIERRA OP (Bevelled Tegular) Edge Tiles With Armstrong 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.6, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 16mm , suitable for Green Building application, with Recycled content of 31%. The tile shall be laid on Armstrong Suprafine 32 with 15 mm face exposed grid colour white having rotery stitching on all silhoutte type T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.5 Kgs/M2 & minimum pull out strength of 100 Kgs. The T Sections have a Galvanizing of 90 grams per Sqm and need to be installed with Suspension system and necessarey aluminium angle of Armstrong make, including taking down old ceiling etc complete all as specified and directed.

Complete removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as specified and directed.

Material and labour for distempering on old work (two coat) with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade. complete all as specified and directed.

Providing and applying plaster of paris putty of 2 mm thickness over old prepared surface to prepare the surface even and smooth complete all as specified and directed.

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and directed.

Providing and laying Polished Granite stone slab colour of Black, Cherry/Ruby Red as in flooring in required design and patterns, in linear as well as curvilinear portions of the building with 18 -19mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing, moulding and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, Complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for including disposal of material within 50 metre lead complete all as specified and directed.

Material and labour for Cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in subbase of flooring complete all as specified and directed.

Providing and laying double charged Vitrified tiles of size 600mm x 600mm in floor (having thickness 9mm to 10mm) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 15 mm thick screed bed in cement mortar 1:4 jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.complete all as specified and directed.

Providing and laying Vitrified tiles (having thickness 9mm to 10mm), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 10 mm thick backing coat of cement mortar 1:3 jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete all as specified and directed. Note : Size of tile as directed by Engr-in-Charge.

Supply and fixing Venetian blinds with design on inner face, verticle type made of fiber cloth fixed to wall with necessary aluminium brackets, screws etc including Alluminium frame ropes, rollers etc as approved by GE and complete all as specified and directed.

Providing and fixing 610x510 mm bowl depth 200 mm Kitchen sink without drain board Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, 1500 CP swan neck pillar tap including painting of fittings and brackets, cutting and making good the walls wherever required complete all as specified and directed.

Supply and Fix 15mm bore Medium grade galvanised tube with all necessary fittings and fixed complete to wall and ceiling or laid in floor including cutting and making good to the walls complete all as specified and directed.

Providing and fixing C.P. brass stop cock of standard design and of approved make conforming to IS:8931 of 15 mm nominal dia complete all as specified and directed.

Providing and fixing uplasticised PVC connection pipe 45 cm length with brass unions of 15 mm nominal bore complete all as specified and directed.

Taking down copper/aluminium point wiring with PVC casing & caping (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface of walls, floors, etc complete all as specified and directed.

Taking down old serviceable LED light fitting any type and deposite to MES store complete all as specified and directed by Engr-in-Charge.

Taking down main switches & DBs etc and making good to the disturbed surfaces complete all as specified and directed by Engr-in-Charge.

Taking down carefully unserviceable sub main wiring any size and type including conduit/casing caping etc complete all as specified and directed.

Material and labour for Point wiring for one light point with 1.5 sqmm PVC insulated and unsheathed copper conductor multistranded 1100 volts grade, ISI marking drawn thorugh and including non metallic PVC rigid conduit and conduit accessories, medium grade, ISI marking, surface/concealed with provn of modular metal flush box and Modular white Cover Plate with Frame and modular switchs/sockets inculding one run of 1.5 sqmm PVC insulated unsheathed copper cable FRLS grade as in earth wire for continuity and connecting to earth dolly for one light point controlled by one switch complete including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the wall (wash/paint/distemper) wherever required(as per the existing condition) complete all as specified and directed. Note -Modular metal flush box and Modular white Cover Plate with Frame and modular switch shall deemed to be included in quoted rate

(b) One ceiling/Exhaust/ Wall fan point controlled by one ; one way switch

(c) One 3 pin 5 Amp socket out let controlled by one switch indep board.

All as per item No 31 herein before but point wiring complete with 2.5 sqmm for 3 pin 15A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor complete all as specified and directed by Engr-in-Charge.

Supply and fixing two module stepped type electronic fan regulator on the existing module plate switch box including connections but excluding modular plate etc as required complete all as specified and directed by Engr-in-Charge

Supply and fixing ceiling rose 3 terminal 240 Volts, 5Amps on wall/ceiling/roof surfaces complete all as specified and directed by Engr-in-Charge.

Supply and fixing 8way (4+24), double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc, complete all as specified and dircted by Engr-in-Charge.. (But without MCB/RCCB/isolator)

Supply, fixing in repair connecting 40 to 63 amps 10 kA C curve on miniature circuit breaker suitable for inductive load of TPN (4P in the existing DB complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs MCB, SP 6 to 32 Amps of C curve characteristics with separate termination provision of cable and busbar both and DIN facility at both ends complete all as specified and directed by Engr-in-Charge

Material and labour for sub main wiring using single core 2 runs of 4 sqmm copper conductor,FRLS cable 1100 volts drawn through and including PVC conduit of suitable size including one run of PVC FRLS insulated copper earth continuity wire of 4.0 sqmm and connected to earth dolly wiring complete all as specified and as directed.

Material and labour for sub main wiring complete with 4 single core cable 16 sqmm PVC insulated FRLS stranded copper conductor cable 1100 volts grade including PVC conduit with one run of PVC insulated FRLS cable 16 sqmm copper conductor cable (green in colour) for earth continuity conductor connected to main earth dolly complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED multi colour 2 in 1 (white + warm) changeable recess - mounted panel awith white powder coated CRCA housing and full mounted acrylic diffuser (2'x2') 32 watt, 220 V AC with occupation sensor high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-Charge.

Taking down ceiling fan/exhaust fan of any sweep for servicing/repairing/maintenance, opening up, identifying and replacing the defective parts, cleaning, greasing etc reassembling and hanging up/fixing back at its original position, connection up and testing complete all as specified and directed by Engr-in-Charge. Note : Cost of spares such as capacitors, bearings etc will be measured and paid separately under respective item of sch as s supply only.

Supply only Capacitor 2.5 MFD for ceiling fan/Exhaust Fan of any make, any model and any sweep complete all as specified and directed.

Supply only bearing No 6201/6202/6203/6204 of any other No matching to the existing size and suitable for ceiling fan/exhaust fan/wall mounted fan complete all as specified and directed by Engr-in-Charge.

Painting with superior quality enamel paint (Half White) to ceiling fan of size 1200/1400mm complete all as specified and directed by Engr-in-Charge.

Supply and fixing Air circulator fans 230 Volts single phase oscilating 450mm sweep suitable for wall mounting complete all as specified and directed by Engr-in-Charge.

Supplying and fixing 20A, 240V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc complete all as specified and dircted by Engr-in-Charge.

M&L Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below normal ground level) with the top edges of plate not less than 1.5 mtrs below normal ground level, earth plate connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate connected to earth test point all as specified or indicated including testing on completion, including necesary excavation and earth work in any type of soil and edwquate quantity of common salt & charcol for alternate layer around the earth plate, including PCC 1:2:4 and 10mm thick CI cover with arrangement of hinge to 40x40x6mm CI angle iron frame, including 20m dia GI pipe for watering purpose with the arrangement of funel and wire mess, including GI pipe of 15mm dia for earth lead protection, complete all as specified and directed by Engr-in-Charge.

Material and labour for earth connection from earth electrode with 4.00mm dia copper wire in 15 mm dia GI pipe from earth electrode inclduing connection with copper thimple excavation and re-filling as required complete all as specified and directed by Engr-in-Charge.

Supply and fix Split type indoor/outdoor unit capacity 1.5 TR,BEE star rated with cordless remote control and in built air ioniser for better indoor air quality with copper condenser and copper coil complete all as specified and directed.

Supply and fix Voltage Stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with capacity of + 2.5% of capacity 4 KVA complete all as specified and directed by Engr-in-Charge.

All as per item No 56 but capacity of 2 KVA complete all as specified and directed by Engr-in-Charge.

Supply, installing, commissioning of water cooler fully stainless steel, electric driven single phase having approx storage and nominal cooling capacity of 40/80 Ltrs complete all as specified and directed by Engr-in-Charge.

VIRENDRA FABRICATORS (BID ID -3290674)

M/S NILESH BUILDERS (BID ID -3291137)

S.K.HARAL (BID ID -3291088)

Sunil Constructions (BID ID -3291127)