Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹20.2 LAccepted-AOC | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹22.0 L+₹1.8 L (9.03%)Rejected-Finance | L-2 | Rejected-Finance other than L-1 | |
| 3 | Rejected-Technical | - | Rejected-Technical Rejected due to adverse remarks in WLR for Qtr ending Mar 2022 |
Tender Value
₹20.7 L
EMD Value
₹41,500
Closing Date
3 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tapan nauriyal, Lt Col, GE
Garrision Engineer, 864 Engr Wks Sec, PIN-913864, C/o 56 APO
Provn of guard house with allied infra for EME Bn at zone B at BB Cantt, Srinagar
2022_MES_556658_1
864/WS-45/2022-23
Open Tender
Civil Works
Item Rate
180 days
B B Cantt Srinagar
AS PER TENDER
7 documents required · 7 mandatory
₹500
GE 864 EWS
₹41,500
Yes
19 Dec 2022
8 Oct 2022
5 Nov 2022
8 Oct 2022
3 Nov 2022
22 Oct 2022
Amount
Surface dressing not exc 15cm deep and getting out in any type of soil, complete all as specified and as directed.
Excavation in trenches not exc 1.50 mtr wide and not exc 1.50 mtr in depth for foundation, shafts, cesspits, manholes, pier holes etc. not exc 10 Sqm on plan and getting out in any type of soil, complete all as specified and as directed.
M&L for PCC (1:4:8), type D-2 (using 40mm graded crushed stone aggregates) as in foundations, filling in and mass concrete, complete all as specified and as directed.
M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, for rough finished surfaces of concrete, complete all as specified and directed.
M&L for RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in Foundations, including rafts,footings, foundation beams; plinth beams; bases or columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed. Note: Design/Sectional detail of RCC structure shall be decided by Engr-in-Charge as per ground requirement.
M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions, etc, for rough finished surfaces of concrete, complete all as specified and directed.
M&L for RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in Columns, pillars, piers, posts and struts, complete all as specified and directed. Note: Design/Sectional detail of RCC structure shall be decided by Engr-in-Charge as per ground requirement.
M&L Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc, for rough finished surfaces of concrete, complete all as specified and directed.
M&L for RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in Beams, cantilevers, bressumm ers, lintels over 1.5, complete all as specified and directed. Note: Design/Sectional detail of RCC structure shall be decided by Engr-in-Charge as per ground requirement.
TMT mild steel bars, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) , complete all as specified and as directed by Engr-in-Charge.
All as per serial item No. 10 here in before but, TMT mild steel bars, 5mm dia and over upto and including 10mm dia, in stirrups, spacers & binders, complete all as specified and as directed by Engr-in-Charge.
Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25cm thick, complete all as specified and as directed.
Removing of excavated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.50 mtr above the starting point, complete all as specified and directed.
Hardcore of gauge n exc. 63 mm with Broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed by Engr-in-Charge.
100 mm thick plain cement concrete (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in foudation, filling, sub base and mass concrete complete all as specified and as directed by Engr-in-Charge.
M&L for Non-skid, coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screedbed in CM (1:6), complete all as specified and as directed by Engr-in-Charge
Description all as per Srl item No 16 above but as in skirting over and including 10 mm thick screed bedding/ backing layer in CM 1:3, complete all as specified and as directed by Engr-in-Charge.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 mtr mean radius, built in cement mortar 1:6 as in manhole, wall, Drain etc complete all as specified and directed.
15mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6, finish surfaces even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge.
15 mm thick rendering in two layer (10mm + 5mm) on fair faces of brick /concrete on wall including facia chhajja etc.surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing Liquid water proofing compund in the proportion as mentioned in manufacturer's instructions complete all as specified and as directed by Engr-in-Charge. Note : Water proofing compund to be measured and paid for separately as supply only.
Supply only liquid water proofing compound, complete all as specified & directed. (Make : Dr Fixit, LW+, STP Ltd No 1 (L) & SIKA or equivalent as specified in PS)
Preparation new surfaces plastered or unplastered and applying two coats of oil bound distemper over a coat of primer over a coat of white cement based wall care putty on walls to give uniform surface, complete all as specified and as directed by Engr-in-Charge.
Preparation new surfaces plastered or unplastered and applying two coats of cement base paint on wall over a coat of suitable primer, complete all as specified and as directed by Engr-in-Charge.
Rolled mild steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) Fe-410- W(Gde E-250) quality 'B' including distance pieces, cleats etc complete all as specified and directed.
S&F Pre-painted coloured corrugated profiled Galvalume/Zincalume sheet with min 0.50mm TCT with BTM of 0.45mm thick conforming to IS -513(AZ-150 GSM,Al Zn alloy metallic coating 550MPA yield stress as per AS-1397),as in roof covering/clading to wall fixed with self taping screws, colour/exterior coat of silicon modified polyster/ BHP x RW paint system 20 micron top coat applied over 5 micron primer and a micron polyster back coat applied over 5 micron primer,all fixed with galvanised self drilling self tapping fastener(12-14x55 with EPDM seals), complete all as specified and directed.
Pre-painted coloured plain steel profiled Galvalume/Zincalume sheet with Min 0.50 mm TCT with BTM of 0.45mm thick conforming to IS-513(AZ-150 GSM, Al Zn alloy metallic coating 550 MPA yield stress as per AS-1397) as roof ridge colour/exterior coat of silicon modified polyster/BHPxRW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer ,all fixed with Galvanised self drilling self-tapping fastener (12-14x55 with EPDM seals) complete all as specified and directed.
Providing 75 mm thick cement concrete 1:3:6 type C-2 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints through out the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed by Engr-in-Charge.
Pressed steel frames for doors, made out of 1.25 mm thick MS sheet, with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete, of frame size 125 mm x 60 mm, including one shop coat of red oxide zinc chrome primer, including filling voids with PCC 1:3:6 type C-0 complete all as specified and as directed by Engr-in-Charge.
Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete, all as specified and directed.
40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides) , complete all as specified and directed.
S&F 30 mm thick 2nd class soft wood (kail) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze et (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section -8 , clause 8.24 (a) complete all as specified and as directed .
M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F floor door stopper of alumium body and tongue anodised with land drawn steel spring overall lengthof cover plate 150mm fixed with screw, complete all as specified and as directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling and fixing in opening as per specification and drawing complete all as specified directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitabele PVC sheet beading and joined together with solvent cement suppling and fixing in the frame at site as per specification and drawing, complete all as specified and directed.
S&F 150 mm long aluminium barrel tower bolts of extruded section and fixed, complete all as specified
S&F 150 mm aluminum alloy handles, fabricated type, anodised complete all as specifed
S&F Butt hinges, extruded alu minium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 of size 100 mm complete, all as specified and as directed
S&F Aluminium alloy, anodised, sliding door bolt 250 mm in length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed
Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified
4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and as directed by Engr-in-Charge.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm incl wooden bedding, complete all as specified and directed.
Supply and fixing powder coated aluminium anodised window grill mesh size 75x50x5mm thick completee all as specified and directed.
S&F for Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers completee all as specified and directed.
S&F in 4mm thick of size 600mm x 600mm HSPC (high pressure steam cured) pre-perimetered self❘ embossed, textured designer E-board classic, to be fixed and including GI based power coated snap grid/ section armstrong size 600mm x 600mm with main runner 38X24X0.90mm thick, cross tee 28.6X24X0.90mm and wall angle 19X19X0.90mm duly suspended with 4mm dia GI bar hangers 1200mm centre to centre bothway, fixed with steel dash fastners or from purlin from the roof with alignment clip, completee all as specified and directed by Engineer-in-Charge.
S&F Rolled mild steel Compound girders & stanchons, lattice girders, aerial masts, staging for water tanks & the like including caps, bases,splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. GDE Fe410-0 or Fe 250-0 complete all as specified and as directed by Engr-in-Charge.
Rotational moulded polyethylene water storage tank , two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 500 litres each including all accessories (i.e GI nipples and Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of bore 20mm/25mm (Minimum weight 210 gram) etc), complete all as specified and as directed by Engr-in-Charge.
Non skid, light coloured, white printed ceramic jointfree/rectified tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and as directed by Engr-in-Charge.
Glazed coloured ceramic jointfree/rectified tiles 450mm x 300mm x 7 to 8mm on vertical surfaces of walls as in dado/skirting etc., set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 10 mm thick screed bedding/ backing layer in CM 1:3, complete all as specified and as directed by Engr-in-Charge.
15mm bore galvanised steel water tubing medium grade (ISI Marked) with and including all fittings and fixed complete to walls and or laid under floors etccomplete all as specified and as directed by Engr-in-Charge.
20mm bore galvanised steel water tubing medium grade (ISI Marked) with and including all fittings and fixed complete to walls and or laid under floors etc complete all as specified and as directed by Engr-in-Charge.
Brass Chromium plated over head shower rose, 125mm size with swivel joint fixed to pipe or union of 15mm bore, complete all as specified and as directed by Engr-in-Charge.
S&F Viterous china wash basin , white, flat back size 550 x 400mm including waste coupling CP 32mm dia chain and plug and porcelan stopper and CI brackets of iron 65 x 65 x 6mm embedded in PCC block with PCC 1:2:4 type B-1 and PVC waste pipe 32mm dia & CP getting with holes, fixed in repair, complete all as specified and as directed by Engr-in-Charge.
M&L One piece closet with bowl for coupled WC with PP soft seat cover, hinges fixing accessories and accessories set of size 360x680x765mm, strap 220mm cistern with cistern fittings for , complete all as specified and as directed by Engr-in-Charge.
Hand shower (health faucet) (ABS Body) with 8mm dia 1.0 meter long flexible tube with wall hook fixed to 15 mm bore tubing, complete all as specified and as directed by Engr-in-Charge.
Bib taps , fancy type cast copper alloy, chromium plated, with crutch or butterfly handle screwed down for iron pipe or for brass ferrule for bore of pipe 15 mm, complete all as specified and as directed by Engr-in-Charge.
Angle valves, fancy type chromium plated cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore 15mm with adjustable flanges, complete all as specified and as directed by Engr-in-Charge.
PVC (SWR) 'P’ trap of size 110mm bore, complete all as specified and as directed by Engr-in-Charge.
110mm bore, PVC (SWR) pipes, pressure rating 4 kg/sqcm, single or double socketed, in any length with rubber ring joints, laid in trenches or floor, complete all as specified and as directed by Engr-in- Charge.
75 mm bore, PVC (SWR) pipes, pressure rating 4 kg/sqcm, single or double socketed, in any length with rubber ring joints, laid in trenches or floor, complete all as specified and as directed by Engr-in- Charge.
75mm PVC (SWR) floor traps with grating including jointing to waste pipe fixed cncrete type B1 (1:2:4), complete all as specified and as directed.(ISI Mark)
Brass chromium plated centre hole basin mixer 15 mm bore for mixing hot & cold water screw down for iron pipe, complete all as specified and as directed by Engr-in-Charge.
Stop valves, cast copper alloy, with long shank and cup screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore 15mm, complete all as specified and as directed by Engr-in-Charge.
Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms), complete all as specified in repairs. (ISI Mark)
PVC connection 15mm size with PTMT nuts of length 600mm ,complete all as specified and as directed by Engr-in-Charge.
Toilet haper holder, chromium plated fix with brass screws, complete all as specified and as directed by Engr-in-Charge.
25mm dia Curtain rail/ Harrison rails,anodised aluminium alloy with fixing brackets, stops, rollers etc, complete all as specified and as directed by Engr-in-Charge.
Providing cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones , bed plates, roof padding, kerbs not provided for including weathering, slightly rounded or chamfered angles including necessary formwork complete all as specified and as directed by Engr-in-Charge.
Precast RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregates landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves, fins and similar articles with plain faces including all mouldings but excluding frame, set in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed by Engr-in-Charge.
Cutting into existing manholes for connecting new drains pipe 150mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, complete all as specified and as directed by Engr-in-Charge.
Reinforced concrete pipes 150mm bore ,class NP 2,laid and jointed with CM 1:3 complete with coller all as complete all as specified and as directed by Engr-in-Charge.
Plain cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipes all as specified. Note:-(i) Thickness of bed below barrel of pipe-10 Cms. (ii) width of bed- outer dia of pipe plus 30 cms.
S&F brass chromium plated wall mixer 15 mm bore for mixing hot & cold water screw down for iron pipe, complete all as specified and as directed by Engr-in-Charge.
M&L for point wiring with single runs PVC insulated FRLS grade, 1100V grade cable with multistranded copper conductor of size 1.5 Sq. mm (Nominal area) (ISI Marked) drawn in and including PVC Casing capping /PVC conduit of suitable size with all fittings and accessories including PVC flush box/ Metal flush box/ sunken box of suitable size and drawing continuous earth wire of PVC insulated FRLS grade, unsheathed stranded copper conductor of size 1.5 Sqmm(ISI Marked) terminated the box for following type of point wiring including making good disturbed of wall completed all as directed by Engineer-in- Charge.
One light point or one fan point controlled by one switch SP 230 Volts
One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.
One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.
Description all as per item No 76 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 2.5 sqmm green solid copper conductor cable as continuous earth wire with lugs complete all as specified and directed.
Supply and fix, Switch piano (ISI marked) Single pole 240 volts, flush type, one way 5Amps complete all as specified and directed.
Supply and fix socket outlet (ISI marked), 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed.
Supply and fix, Switch piano (ISI marked) Single pole 240 volts, flush type, one way 15Amps complete all as specified and directed.
Supply and fix socket outlet (ISI marked), 2in 1, /3 pin 5 and 15 Amps, flush type, 240 volts complete all as specified and as directed.
Stepped type fan regulator 120W, 230V 50 C/S, electronic type, hum free suitable control speed of fan from 0 to 100 % and connecting electrically fixed in repair complete all as specified and as directed by Engr-in-Charge.
S & F Ceiling rose three terminals polycarbonate , isolated body complete all as specified and directed. Make Havells/SSK/Cona
S & F LED light fitting fixture 20/ 22W, 6500K, 2000 lm decorative ultra slim with co extruded channel in thermally conductive material with plastic housing, heat sink, environmental friendly having power factor >0.95, surge protection 2.5KV energy efficient ready to use complete all as specified. Make-Wipro/Philips/GE
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and as directed by Engr-in-Charge. Make: CG/ Usha/ Havell's
Supply & fix ventilating fan made out of high quality engineering plastic, resistant to colour change with anti static properties, 250mm sweep suitable to work on 230 Volts 50 Hz, 1200 RPM, coper winding compete all as specified and directed. Make: Bajaj/ Usha/ Havell's
S & F LED Mirror light fitting 10 W 6500K decorative ultra slim linear LED lighting fixture with extruded AL. heat sink, environmental friendly, energy efficient, complete all as specified and directed.
Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground, (Earth pit not less than 2.25 mtr deep below ground level) with top edge of plate not less than 1.5 mtr below normal ground level, connected to and including 4mm dia galvanized iron wire lead by means of bolts, nuts, check nuts and washers of galvanized standard iron or steel all as specified or indicated in electrical plate No 3 of MES Part-I, including testing on completion including the material and labour and taking out old unserviceable earthing of the following :- (a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1. (c) Precast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 1.87 Kg/Sqm. (d) Funnel with watering pipe of GI 20 mm nominal bore medium grade and copper lugs etc all as specified. (e) 15 mm nominal bore light grade GI protection pipe 7.5 mtr long for protection of earthing lead from mechanical injury or tempering. (f) Requisite quantity of common salt and charcoal. (g) Testing of earthing. Note : On testing after completion of earthing, if the desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk and cost to the entire satisfaction of the Engineer-in-Charge.
S&F MCB DB 8 way, 230 volt, sheet metal enclosure for MCB's, with IP-43 protection, double door with 100 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified. Make Legrand/L&T/Schnider
S&F MCB SP 6 to 32 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as specified. Make Legrand/L&T/Schnider
S&F MCB SPN 32 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as specified. Make Legrand/L&T/Schnider
Environmental friendly, energy saving, surface/ wall mounted, decorative LED 10 Watt Bulk head luminire,opal diffuser with integral electronic LED driver with APFC and lower THD, Output complete making connection and testing after fixing all as specified and directed by Engr-in-charge.
Supply & fix Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc compete all as specified and directed. Make: Bajaj/ CG/ Havell's
Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections of size 16Sqms with two single core cablesuspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circulaer,, complete all as specified and as directed.
Dry coarse sand as cushioning to under ground cable provided with layer of 8 cms deep before laying the cable and 15 cms deep after laying and stretching the cable, punned to 18 cm thick complete all as specified and as directed. Note:- Only punned thickness shall be measured for payment purpose.
Brick covering with width equal to length of brick as mechanical protection to cable using sub class ‘B’ bricks laid flat of size 230mmx115mmx75mm complete all as specified and as directed by Engr-in-Charge.
Gun metal globe of gate valve with iron wheel head, screwed both ends of size 25mm fixing in repair, complete all as specified and as directed by Engr-in-Charge.
25mm bore galvanised steel water tubing medium grade (ISI Marked) with and including all fittings and fixed complete to walls and or laid under floors etc complete all as specified and as directed by Engr-in-Charge.
Supply and fixing LED street light fitting 40 Watt with lense, toughned glass, IP 66 protection 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant with impact and corrosion resistant complete with bracket made out of 40mm bore GI tubing 1.5 m with MS clamps, fixing of fitting complete all as specified and directed.
M/S AKMAL CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .