Extension of Water Quality Lab and Data Centre at Kalwa (Thane).

Amount

Item No.1 : Removing G I or A C Sheet roofing Including purlins, principal rafters etc including sorting Serviceble and unserviceble material , stacking the same as and where Directed in the compound including Scaffolding etc complete.Red Book-As directed by Engineer-in-charge. PWD SSR 2021-22 ( It No 1164/38.26/P N 173)

Item No 2:Removing kingpost truss from roof and stacking the material as directed with all lifts and initial lead complete.PWD SSR 2021-22 ( It No 1528/46.04/P N 215)

Item No 3 : Dismantling flat wooden or A C Sheet ceiling with frame work including stacking the material as directed with all lifts and lead complete .PWD SSR 2021-22 ( It No 1530/46.06/P N 215)

Item No 4 : Removing Doors and windows with frame and stacking the material as directed with all lifts and lead c complete.PWD SSR 2021-22 ( It No 1539/46.15/P N 215)

Item No 5 : Dismantling Brick masonary in lime or Cement Morter and stacking the material as directed with all Lead,lifts complete. PWD SSR 2021-22( It No 1533/46.09/P N 215)

Item No 06 - Filling in plinth and floors with contractors material / brought from outside and approved by Engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc.complete.PWD SSR 2021-22 ( It No 749/21.37/P N 117)

Item No 07 - Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.PWD SSR 2021-22 ( It No 750/21.38/P N 117)

Item No 08-Providing and filling in the foundation with sand of approved quality including watering, compacting etc. complete. PWD SSR 2021-22 ( It No 751/21.39/P N 117)

Item No. 09:- Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering tc. complete PWD SSR 2021-22 ( It No 902/28.01/P N 146)

Item No. 10:- Providing & Laying cast in situ/ ready mix cement concrete in M 20 of of trap/ granite/ quartzite/ genies metal for bed blocks, foundation blocks & such other items including bailing out water steel centering form work laying/pumping compacting roughening them if special finish is to be provided finishing unheaven honeycombed surface and curing etc complete the cement mortar 1:3 plaster is considered for rendering unheaven and honeycombed surface only newly laid concrete shall be covered by gunny bag, plastic tarpauling etc (wooden centrering will be not be allowed) with fully automatic microprocesser based PLC with SCADA enable reversible drum type mixture concrete batch mix plant (pan mixture etc complete) with fine aggregate (crush sand VSI grade.PWD SSR 2021-22 ( It No 829/24.10/P N 131)

Item No. 11: Providing Second class B B masonary with Conventional/IS type Bricks in C M 1: 6 in super structure including stricking joints , racking out joints,watering and scaffolding complete. Spec :No.BdG-05 PWD SSR 2021-22 ( It No 887/27.01/P N 144)

Item No 12 : Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 gram/Running metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/Running metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box. PWD SSR 2021-22 ( It No 1228/39.37/P N 183)

Item No 13 :Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/Running metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/Running metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight o.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box

Item No 14:-Providing and fixing in position extruded aluminium partitions having frame made out of extruded tubular section of size 65 mm x 40 mm with 12 mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to IS 129231990, laminated on both sides, Novateak or equivalent with aluminium glazing clips of size 12 mm x 12 mm (conical) as per drawing etc. complete.

Item No 15-Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete

Item No 16-Providing and fixing frame with / without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete.

Item No 17-Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35mm thick style and rail with 25 mm thick panels with openable fan light as per detailed drawings. Excluding the door frame 60mm x 100mm stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats. (Excluding the door frame)

Item No 18- Providing and fixing Country cut teak wood double or single leaf panel led shutters, 35 mm thick style top and freze rail 95x35 thick with lock and bottam rail 195x25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete

Item No 19-Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.

Item No 20 : Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting,erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. PWD SSR 2021-22 ( It No 817/23.04/P N 129)

Item No 21 :Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete. PWD SSR 2021-22 (Weight of 5.5 Kilogram/sq.m.) ( It No 1142/38.04/P N 171)

Item No 22 : Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.). PWD SSR 2021-22 ( It No 1143/38.05/P N 171)

Item No 23: Providing and fixing false ceiling of plain asbestos cement sheets 4 mm thick with teak wood beadings 45 x 12 mm with frame work of teak wood battens of size 70 x 60 mm at 1.00 M center to center including scaffolding, if necessary, all iron work and painting (visible surfaces) to A.C. sheet and beading in two coats etc. complete. (excluding T.W. runner to be paid separately). PWD SSR 2021-22( It No 1151/38.13/P N 171)

Item No 24 : Providing Sills of polished Kadappa stone 25 to30 mm thick on a bed of 1:4 C.M. including cement float ,filling joints with slurry, curring, polishing & cleaning complete. Red Book spec-No.BdM-29 P. No.397/2012 PWD SSR 2021-22 ( It No 1005/33.20/P N 157)

Item No 25: Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.PWD SSR 2021-22 ( It No 1025/33.40/P N 259)

Item No.26: Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float,filling joints, curing and clearing etc. complete PWD SSR 2021-22 ( It No 1026/33.41/P N 159)

Item No 27:Providing internal cement plaster 12 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete or brick surface in all positions including scaffolding curring etc.complete. Spec. No.: Bd.L.2 Page No. 365/2012 PWD SSR 2021-22 ( It No 956/32.04/P N 153)

Item No 28:Providing Rough cast cement plaster externally in two coat to concrete/brick/stone masonary surface in all position with base coat of 12 to 15 mm thick in C M 1:4 & rough cast treatment 12 mm thick in proportion 1:1.1/2:3 including scaffolding and 14 days curring complete. Red Book spec No- BdL-8 P No 368/2012 PWD SSR 2021-22 ( It No 962/32.12/P N 153)

Item No. 29 - Providing and laying Anti skid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS15622-2006 (Group-BIIA) for anti skid flooring in required position laid on a bed of 1:4 cement mortar including cement float,filling joint with cement slurry cleaning curing etc. complete PWD SSR 2021-22 ( It No 1049/33.67/P N 161)

Item No. 30 : Providing neeru finish to plastered surfaces in a all positions including scaffolding and curing complete. Red Book spec-No.BdL-10 P. No. 369/2012 PWD SSR 2021-22 ( It No 964/32.15/P N 153)

Item No 31 : Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. PWD SSR 2021-22 ( It No 1107/36.14/P N 167)

Item No 32:-Providing and applying plastic emulsion paint of approved quality, colour and shade to old surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.PWD SSR 2021-22 ( It No 1106/36.13/P N 167)

Item No 33:- Providing and applying two coats of lead/zinc base oil paint/ bituminious paint of approved colour to new structural steel work and iron work in buildings including scaffolding if necessary, cleaning and preparing the surface etc. complete. (excluding primer coat).PWD SSR 2021-22 ( It No 1072/35.04/P N 164)

Item No 34 :-Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete PWD SSR 2021-22 ( It No 1290/40.02/P N 192)

Item No. 35:- Providing and fixing UPVC Roof made up of 3 layers roofing material of thickness 2mm having width of 1130 mm and of required Length having Tensile strength not less than 330 Kilogram/cm2,including fastening with self drilling screw having washers made of stainless steel etc. complete. PWD SSR 2021-22 ( It No 1175/38.37/P N 174)

Item No. 36--: Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain galvanised iron sheets 120 cm wide with teak wood planking 20 mm thick including two coats of coal-tarring the upper surface of plank etc. complete. (excluding painting to underside of plank). PWD SSR 2021-22 ( It No 1146/38.08/P N 171)

Item No. 37:- Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt.PWD SSR 2021-22 ( It No 1511/44.10/P N 213)

Item No 38:- Providing antitermite treatment to the sides of flooring of the existing building as per I.S. 6313 (Part III) by punching holes 6mm dia. drilled at a distance of 30cm. centre to centre and injecting one percent of chlorodane emulsion concentrate at the rate of 50 ml per hole and sealing by filling putty etc. complete covering 2 years guarantee on bond paper. PWD SSR 2021-22 ( It No 741/21.28/P N 117)

Item No 39:- Providing antitermite treatment around the periphery of the existing building as per I.S. 6313 (Part-III) by excavating trenches of 20cm width and exposing the sides of columns and plinth beams upto a depth of 300mm and injecting one percent of chlorodane emulsion concentrate at the rate of 2.25 litres per Running metre and refilling the trenches etc. complete covering 2 years guarantee on bond paper. PWD SSR 2021-22 ( It No 742/21.29/P N 117)

Item No. 40:- Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc.On C.M. 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing, etc. complete PWD SSR 2021-22 ( It No 1033/33.48/P N 160)

Item No. 41:- Providing and laying in trenches 15 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 1.25 Kilogram/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete PWD SSR 2021-22 ( It No 1317/41.18/P N 195)

Item No. 42:- Providing and fixing on walls/ ceiling/ floors, 15 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 Kilogram/metre with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.PWD SSR 2021-22 ( It No 1309/41.10/P N 194)

Item No. 43 :- Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete PWD SSR 2021-22 ( It No 1332/41.40/P N 196)

Item No 44: Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connection up to the outside face of the wall PWD SSR 2021-22 ( It No 1349/41.57/P N 198)

Item No 45: Providing and fixing white glazed earthenware Wash Hand Basin of 45cm x 30cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete PWD SSR 2021-22 ( It No 1356/41.64/P N 198)

Item No. 46 : Testing charges for constructing materials used for Govt works (PWD DSR 2021-22 Page 426 to 429) Test as per statement attached

Item No 47 - Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters

Item no 48 : -Shifting of division office and sub division office furniture to renovated office at kalwa using Heavy unskilled majdoor PWD SSR 2021-22 ( It No 36/P N 386)

Item no 49:- 6.00 cum Tipper for shifting of division office and sub division office furniture to renovated office at kalwa PWD SSR 2021-22 ( It No 14/P N 386, I-20/P N 388)

Electrical Work

Item No 01:-Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR grade copper wire, flush type switch, earthing and required accessories as per specification No: WGPW / SW

Item No 02 :- Point wiring for independent plug in PVC trunking (casing capping)with 1.5 sq.mm (2+1E) FR grade copper wire withflush type switch and required accessories as per specification No: WG-PW/SW

Item No 03:-Wiring for plug on board with Switch socket with copper wiring and earthing as per specification No:WG-PW/SW

Item No 04 :- Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA / BW

Item No 05 :- Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA / BW

Item No 06:- Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording theresults as per specification no. EA-EP

Item No 07 :- Providing, erecting and commissioning 4 pole RCCB of electromagneti type with 30/100/300 mA sensitivity and having capacity of 63A complete as per specification no. SWRCCB/ RCCB.

Item No 08 :- Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification no. SWSWR/ MCB

Item No 09 :- Supplying, erecting & marking SPMCB 6A to 32A, B- series(for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Item No 10 :- Supplying and erecting Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendent holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box.

Item No 11 :- Supplying and erecting fan clamp of 30 x 5 mm. M.S. flat of required length and 10 mm. M.S. bolt and nuts erected with necessary hook of 10 mm. M.S. round bar and painted.

Item No 12 :- Supplying and erecting fan hook of 10 mm. M.S. round bargrouted in RCC slab with making the site as original.

Item No 13 :- Supplying and erecting ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

Item No 14 :- Supplying and erecting Ding Dong / electronic musical type call bell with heavy duty coil suitable to operate on 230VA.C. supply erected on polished double wooden block/sunmica block of suitable size

Item No 15 :- Supplying and erecting modular type blanking plate one module ISI mark approved make duly erected on provided plate & box.

Item No 16 :- Supplying and erecting regular/ standard model Ceiling fan of1400mm. sweep complete erected in position as per specification no. FG-FN/CF

Item No 17 :- Supplying & erecting LED 18W tube light fitting (4 feet) with polycarbonate housing, heat sink, integrated HF electronic driver complete.

Item No 18 :- Supplying and erecting blanking plate of suitable size on MCB DB

Item No 19 :- Supplying and erecting modular type electronic step regulator for fan two module ISI mark approved make duly erected on provided plate and box

Item No 20 :-: Supplying and erection WP street light fitting suitable for 2 x24 WTS lamp electronic having pf 0.9 with all access proes complete on provided as per specification no F 4 ODF /FSL 2

Item No 21 :- Supplying and erection Wall bracket for erection of side entry W.P. fluo fitting/ CFL/MV/MH/SV fitting made from 25 mm. dia B class G.I pipe 1.2 m in total length complete as per specification no FG -BKT/WB

Item No 22 :- Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V, 100A complete as per specification no. CP-BB

Item No 23 :- Supplying and erecting fresh air cum exhaust fan of light duty250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner.

Item No 24 :- Supplying and fixing tool-less Information Outlet (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO

Item No 25 :- Supplying and fixing 3 meter length, UTP patch cord of Cat 6type in position as per specification No. WG-COC/PC

Item No 26 :- Supplying & installing UTP networking cat-6+ cable suitable for LAN / WAN Computer net-working as per specification no. WG-COC/NC complete.

Item No 27 :- Supplying, installing, testing and commissioning split type variable speed Inverter technology room Air conditioning unit 1.5 TR Capacity having ISEERminimum 3.50 to maximum 3.99 suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hiwall / floor mounting type complete with refrigerant R410 A/R32 and copper condenser at position. specification no. APAC/ SAC

Item No 28 :- Supplying and erecting metal clad distribution board 415V,3 ways, 32A. per way & neutral bar connector complete erected on iron / GI frame as per specification no. SWSWR/MDB

Item No 29 :-Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50 cycles nominal cooling capacity of 150 liters per hour and storage capacity 80 liters with partially stainless steel body As per specification No. APWCR/WC