PWD/BWN/Rs.4.51lacs/ Special repair due to road cut made by HSVP Department on Mini Bye Pass Rohtak road to Dhana Road in Bhiwani Distt

Amount

Carriage of materials (metalled roads), lead more than 0.48 Km. excluding loading, uloading and stacking Stone (building or pitching),sand, bajri, shingle, spalls, brick-bats, brick ballast and stone metal (HSR 4.1(a)+5.2(a) ( Highly clay soil and not fit for re-use)

Earth work excavation in ordinary soil exclusive of compensation of earth -Kassi work undressed involving n average horizontal throw upto 2 metres, and an average vertical lift upto 0.05 metre including breaking of clods. (HSR 6.2 (a)

Refiling of tibba sand and with a lead of 3.00 KM including dressing, the cost of rolling and watering all allowances for labour hardness wetness irrespective of all lead and lift,and including Compensation for earth taken from private land, fields etc.(N.S.)

Providing & laying 150mm thick (Compacted) stone metal (G-II) 53-22.4mm gauge wearing coat to water bound macadam in layer of 75 mm each using screening type ‘B’ compacting with 3 wheeled steel roller/vibratory roller to achieve the desire density including lighting, guarding barricading and maintenance of diversion etc. as per clause No.404 of MoRT&H specifications for road & bridge (5th Revision) of 2013 as per drawing and design directed by the Engineer complete in all respects. (N.S).

Providing and laying tack coat with bitumen VG-10 grade pressure distributor at the rate of 0.30 kg per sqm on the prepared bitumen/granular surface cleaned with mechanical broom including cost of bitumen as per clause No. 503 (5th edition) 2013 as per MoRT&H specification (NS)

Providing and Laying 50 mm thick Compacted bituminous macadam in (BM) in one layer by hot mix plant and paver finisher as per clause No. 504 table No. 500-7 of MoRT&H specification for road and bridge works (5th Revision) of 2013 using minimum 3.4 % bitumen grade VG-30 as binder content by weight of total mix, complete in all respects i/c cost of bitumen, instruction issued from time to time by MoRT&H regarding machinery & bitumen will be followed strictly. The use of self propelled mechanical paver fitted with electronic sensor device conforming to MoRT&H specification in mandatory including cost of bitumen VG-30 grade. (N.S).

Providing and laying 20mm thick premix carpet (PC) excluding cost of tack coat, with mixed material brought from Hot mix plant and laying with paver finisher and compacting with road roller to achieve specified value of compaction and direction of Engineer including cost of lighting arrangement, sign board and night watch, complete in all respect. I /c cost of Bitumen VG-10 grade as per clause 510 MoRT&H specification (5th edition) 2013 (NS).

Providing & Marking center line / Zebra Crossing with hot applied thermo-plastic road marking paint complete in all respects such as furnishing all labour, materials tools, equipments including all incidental costs necessary for carrying out the work at site conforming to the technical specification clause 803.4 of MoRT&H specification for road and bridge works (5th edition) 2013 as directed by the Engineer.

KALUWALA CONSTRUCTION PRIVATE LIMITED