ADDN ALTN TO 16 X ROOMS OF BLDG NO P-84 MAIN BLOCK OF HQ CENTRAL COMD UNDER GE EAST LUCKNOW

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete complete all as specified & directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in in CM (1:6) complete all as specified & directed.

Taking down cement plaster on brick walls / ceiling incl. raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed..

M&L for rendering 15mm thick in CM 1:6 brick work or concrete surface and finishing the surface even and smooth without using extra cement complete all as specified & directed..

M&L for preparation of new plastered surface of wall including wall care putty 1mm thick and applying two coats of oil emulsion distemper (OBD) over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint of approved shade/tint by using roller only complete all as specified and as directed.

M&L for Complete removal of existing treatment on brick wall/concrete surface and applying two coats of oil bound distemper over 1mm thick of wall care putty of wall incl preparation complete all as specified & directed.

M&L for Preparing of old wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.complete all as specified & directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the premises complete all as specified & directed.

S&F vitrified tiles light shade 10mm thick (Square/rectangular) polished area of each tile exc 0.42 Sqm but n.exc 1.00 Sqm in floor etc laid over 20mm thick screed bed in CM (1:6) set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and directed. Note : Tiles fixed with 3-5mm thickness spacer and joint fill with epoxy grout (No EXTRA payment will be paid for spacer&epoxy grout)

Ditto as above item No.10 but laid over 10mm thick in screed bed CM (1:3) as skirting etc complete all as specified and directed.

S&F of hollow strip PVC Wall Linning ( dual shade ) consisting of 6mm thick (Havy duty) any color/ desigened PVC sheet inclusive of nails and fixing at site on wall and PVC L/U beading at top of wall lining,corner of wall,opening eadge of door & windows with adhesive matching with panel as per specifications and drawing complete all as specified and as directed.

Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including iron mongery and cutting holes for hold fasts & making good complete all as specified & directed.

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc "including moulding / rounding the edge of granite complete all as specified & directed.

S&F supply and fixing factory made uPVC Prelaminated colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wiremesh panels) upto 1.50m height made of (big series) frame116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremeshshall be paid separately)

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified & directed.

S&F of sheet glass 4mm thick,ordinary quality and glazing with aluminium snap beading in squares n.exc 0.5 sq. m in each pane complete all as specified & directed.

S&F powder coated aluminium grill (opening of grill not more than 80x80mm) fixed to windows or ventilators with powder coated aluminium U channel 25x12mm size with powder coated aluminium frame size 25x40x1.20mm etc complete all as specified and as directed.

S&F in repairs Brass sliding door bolt 300mm long with sand or die-cast brass hasp & staple(bolt type) and fixing bolts and sliding bolt with rolled or drawn brass bolt complete all as specified & directed.

S&F 150 mm size Extruded brass handles,fabricated type polished etc complete all as specified & directed.

S&F in repairs aluminium body door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg. and fixed. complete all as specified & directed.

S&F in repair 140mm long floor door stopper of brass body and tongue with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified & directed.

S&F in repars 200mm long brass barrel tower bolts with castor sheet barrel and rolled or cast bolt fixed etc complete all as specified & directed.

S&F 12mm thick plain Gypsum board false ceiling (Raise & Sunk type) with GI frame work including all necessary drilling , cutting to fix electrical items as under:- (a) GI sheet channel 30x25x20mm of 24 Gauge fixed with rawl plug and screws 450mm centre to center alongwith perimeter of walls. (b) GI sheet channel made to shape 50x40x40mm of 24 gauge placed @ 600mm centre to centre from perimeter of wall except long wall (in one span) (c) GI sheet intermediate runners of size 45x10x10mm of 24 gauge fixed @ 1200mm centre to centre leaving frame of one side wall (in other span) (d) GI sheet 25mm wide & 20mm gauge suspenders fixed with steel fasteners to roof, ceiling @ 1200mm centre to centre incl plugging in RCC slab. (e) Fixing of 12mm thick gypsum boards, filling joints with P.O.P and finishing complete with two coats of distemper oilemulsion paint over one coat of 1mm thick puty on ceiling.complete all as specified & directed. Note : ceiling Measurement will be flat.

M&L for P.O.P cornic size of 150x150mm any design for gypsum board at false ceiling corner etc complete all as specified and directed.

Taking down carefully copper/aluminium point wiring ( light, fan, socket , bell or power) complete including all electrical fittings & fixtures(DBs,submain,cables etc) complete all as specified & directed. by Engineer-in-charge.

Taking down carefully Ceiling fan/wall fan/Exhaust fan complete including all electrical fittings & fixtures etc) and handover to MES Store Yard No-I without any extra cost complete all as specified & directed. by Engineer-in-charge.

Taking down carefully any Light fittings/fixtures any size complete including all (electrical fittings & fixtures etc) complete all as specified & directed. by Engineer-in-charge.

Material and Labour for point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed multi stranded copper conductor single core cable 1100 volts grade in and including PVC conduit with accessories including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP complete all as specified & directed. Note :- Sunken box/cover plate for modular switches, sockets etc will be measured and paid seperately under relevant items and blank plate required if any will be deemed included in the item rate.and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall complete all as specified & directed.

All as per Item No 29 hereinbefore but for One 5 A socket outlet on independent Board complete all as specified & directed.

All as per Item No 29 hereinbefore but for One 5 A socket outlet on same Board complete all as specified & directed.

All as per Item No 29 hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor complete all as specified & directed.

Supply and fix frame plate with match cover but one module complete all as specified & directed.

Supply and fix frame plate with match cover but two module complete all as specified & directed.

Supply and fix frame plate with match cover but three module complete all as specified & directed.

All as per item No.35 above but four module complete all as specified & directed.

All as per item No.35 above but six module complete all as specified & directed.

All as per item No.35 above but eight module complete all as specified & directed.

All as per item No.35 above but twelve module complete all as specified & directed. Note for item No 33 to 39 - Colour of modular plate and switch shall be decided as per site reqirment

Supply and fix terminal box suitable one modular plat of size 75X75x50 mm including cutting, grooving and plastering etc. complete all as specified & directed.

Supply and fix terminal box suitable two modular plat of size 75X75x50 mm including cutting, grooving and plastering etc. complete all as specified & directed.

Supply and fix terminal box suitable but three modular plat of size 100X75x50 mm including cutting, grooving and plastering etc. complete all as specified & directed.

All as item No 42. above but four modular plat of size 128X75x50 mm including cutting, grooving and plastering etc. complete all as specified & directed.

All as item No 42. above but six modular plate of size 210X75x50 mm including cutting, grooving and plastering etc. complete all as specified & directed.

All as item No 42. above but eight modular plate of including cutting, grooving and plastering etc.complete all as specified & directed.

All as item No 42. above but twelve modular plate of including cutting, grooving and plastering etc.complete all as specified & directed.

Supply and fix Modular switch one way 6A 230V AC 50 HZ SP one module complete all as specified & directed.

Supply and fix Modular switch one way 16A 230V AC 50 HZ SP one module complete all as specified & directed.

Supply and fix Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module complete all as specified & directed.

Supply and fix Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module complete all as specified & directed.

Supply and fix Modular Regulator 230V AC 50 HZ SP two module complete all as specified & directed.

S&F modular bell push single pole 1 module6 Amp, 240 volt complete all as specified & directed.

S&F call bell , ding dong / musical AC single phase 230 volts complete all as specified & directed.

S&F in factory made distribution board SP & N 8 way double door fabricated of CRCA sheet with metal door (IP-43 protection) bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as a incomer and 6 SP MCBs as outgoing complete all as specified and directed conforming to IS: 8623 along end box for above DB complete all as specified & directed

S&F in replacement of SP MCB 6 TO 32 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35 sqmm cable complete all as specified & directed.

S&F in replacement of MCB Single Pole & Neutral MCB 32 TO 63 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35 sqmm cable complete all as specified & directed.

S&F Ceiling rose PVC polycarbonate complete all as specified & directed.

Supply and fix PVC pipe 25 mm dia for protection of cables complete all as specified & directed. by Eng-in-Charge

Supply and fix PVC pipe 80 mm dia for protection of cables complete all as specified & directed. by Eng-in-Charge

Supply and fix TV Socket 1 Module Modular complete all as specified & directed. by Eng-in-Charge

Supply and fix Telephone socket 1 Module Modular acomplete all as specified & directed. by Eng-in-Charge.

Supply and fixing of wall/surface mounted integrated batten LED light luminaire of 4ft length with a system wattage of 20-22W with a nominal system lumen output of 2000-2200 lumens and a minimum system efficacy of 100Lm/W. CCT shall be 6500K and CRI ≥ 80. Housing shall be extruded aluminimum with powder coating & with IP20 protection, The luminaire shall meet IP20 rating with surge protection of 2.5KVA, THD ≤10% and PF ≥ 0.95,complete all as specified & directed.

S&F Engagement light with set of three light( Red,yellow, and green light) with insulated body with back plate suitable for batten fittings as directed incl 1.5 sqmm 3 core cable for connection complete all as specified & directed.

Supply and fixing recess mounting LED light fitting 2'x2' luminaire architectural recessed luminaire with CRCA housing and Molded PC diffuser with an unique angular optics for making the illumination easy on eyes for light comfort in office areas with UGR<=19. The luminaire should have a color consistency SDCM< 5, CRI > 80 and choice of CCT: 5700K. Luminaire shall be designed to emit at least 3000 lumens and an efficacy of atleast 120Lm/W and maximum system wattage of 36 Watt, designed for ambient temp 45 deg C. The metallic electronic driver shall have a power factor >0.95, THD <10%, 4KV internal surge protection and the Ripple factor should be <5% to minimise the Flicker and Stroboscopic effect and Fixture should have an operating voltage range of 140-270VAC incl It should have over voltage protection @320V Cut-off with auto restart features. complete all as specified & directed. by engineer in charge.

Supply and fixing ceiling fans with copper winding remote controlled and LED down lights on rotor of ceiling fan,sleek blades of max wattage 35W,down rods with telescopic canopy working on 230V,1200mm sweep,min air delivery 210CFM with service value 6.00 BEE five star rated with brushless direct current motor(BLDC) complete all as specified & directed by Eng-in-charge

Supply and fixing Wall fan complete with all accessories, 230 V, 400 mm sweep. complete all as specified & directed.

Supply and fixing decorative fancy type LED lighting fixture Single brass made bracket with 140mmX78mm rectangular base,210mm length U Shaped brass arm 60 mm dia gallery with 2 pin brass holder tipped with 125mm length MS Powder coated down pipe ,mounted on MS powder coated plate, frosted glass shade 155mmX129MM FINISH DULL BLACK POWDER COATEDand lacquer coated suitable for 03 to 5 watt LED bulb with required electrical connection complete all as specified & directed. by engineer in charge.

Cutting chases in concrete wall/stone for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 20 cm girth and matching wall color.complete all as specified & directed.

Supply and fixing Exhaust fan PVC body 250 mm sweep working on single phase supply incl. all accessories including electrical connection with required wire complete all as specified and directed.

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through & including PVC Conduit pipe 20 mm dia with all fittings complete all as specified & directed.

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings complete all as specified & directed.

Supply and fix modular single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20 amps SPN MCB complete all as specified & directed.

M/S Reliance Construction (BID ID -3297674)

QUALITY CONSTRUCTIONS CO (BID ID -3293412)

GEESR INFRA BUILDERS PVT LTD (BID ID -3293473)

Abode Artisan Enterprises (BID ID -3292964)

SEAHAWK ENTERPRISES PVT LTD (BID ID -3297591)