Lava High School

GORKHALAND TERRITORIAL ADMINISTRATION

WEST BENGAL STATE RURAL DEVELOPMENT AGENCY, KALIMPONG DIVISION

District: KALIMPONG

Name of Work: PROPOSED GROUND FLOOR PLUS 4 STORIED SCHOOL BUILDING AT LAVA HIGH SCHOOL , KALIMPONG.

SUMMARY OF COST ESTIMATE

BILL DESCRIPTION COST EXCLUDING IGST & LWC (in Rs.) GST @18% (in Rs.) LWC @1% (in Rs.) COST INCLUDING IGST & LWC (in Rs.)

1 Cost for Ground Floor Works

2 Cost for First Floor Works

3 Cost for Second Floor works

4 Cost for Third Floor Works

5 Cost for Fourth Floor Works

6 Cost for Top Floor works

7 Cost for Retaining Wall

8 Cost for Land Development Works

9 Cost for Sanitary & Plumbing

10 Electrical Works

Rupees Four Crore Eighty Lakh ThirtyTwo Thousand Seven Hundred SeventyFive Only

WEST BENGAL STATE RURAL DEVELOPMENT AGENCY, KALIMPONG DIVISION

PRICED SCHEDULE

District KALIMPONG

Name of Work PROPOSED GROUND FLOOR PLUS 4 STORIED SCHOOL BUILDING AT LAVA HIGH SCHOOL , KALIMPONG.

Sl No. Item No Page No Brief Description of Item Quantity Unit Rate (Rs) Amount (Rs)

1. GROUND FLOOR

1.01 Page 1 Item No 2.a Earth work in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75m.as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation exceeding 1500 mm %cum 11927

Page 1 Item No 2.b Earth work in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75m.as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (b) Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring. 99.48 %cum 19238 Rupees Nineteen Thousand Two Hundred ThirtyEight Only

Page 1 Item No 3.a Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150mm including watering and ramming etc. layer by layer complete. 73.95 %cum 7754 Rupees Seven Thousand Seven Hundred FiftyFour Only

Page 2 Item no 4.b Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) 21.24 %cum 176473 Rupees One Lakh SeventySix Thousand Four Hundred SeventyThree Only

Page14 Item No 1 Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. 344.51 sqm 530.4 Rupees Five Hundred Thirty Paise Fourty Only

Page 34 Item No 22 II (a) Cement concrete with 30mm down graded shingles excluding shuttering. 25.84 cum 5971.2 Rupees Five Thousand Nine Hundred SeventyOne Paise Twenty Only

Page 25 Item No 6.(ii) Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture] M 25 Grade (ii ) N.B. Variety (Stone Metal) 170.86 cum 8187.6 Rupees Eight Thousand One Hundred EightySeven Paise Sixty Only

Page43-44 Item No 40 (a) (i) (I) Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods initial straightening and removal of loose rust (if necessary), cutting to requisite length hooking and bending to correct shape placing in proper position and binding with16G black annealed wire at every intersection as per drawing and direction.(a) For works in foundation and upto roof of ground floor/upto 4 m i) Tor Steel/ Mild Steel/ SAIL/TATA/RINL 0.000 MT 79822.8 Rupees SeventyNine Thousand Eight Hundred TwentyTwo Paise Eighty Only

Page 43 Item No 36 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs,beams,columns,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground ground floor) (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work 208.94 sqm 374 Rupees Three Hundred SeventyFour Only

Page 42 Item No 36.c Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs,beams,columns,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground ground floor) (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work 391.06 sqm 374 Rupees Three Hundred SeventyFour Only

Page 15 Item No 7 Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth 4.58 cum 8062.8 Rupees Eight Thousand SixtyTwo Paise Eighty Only

Page 15 Item No 7 Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth 0.59 cum 8330.4 Rupees Eight Thousand Three Hundred Thirty Paise Fourty Only

Page 16 Item no 17 125 mm thick brick work with 1st class bricks in cement morter (4:1) in ground floor 43.14 sqm 1038 Rupees One Thousand ThirtyEight Only

Page 114 Item No 1 Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). 0.999 cum 98323.2 Rupees NinetyEight Thousand Three Hundred TwentyThree Paise Twenty Only

Page 140 Item No 4 Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (b) 40mm X 6mm, 200mm Length 22 Each 31.2 Rupees ThirtyOne Paise Twenty Only

Page 189 Item No 1 (i) (a) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (a) 20 mm thick plaster 152.38 sqm 223.2 Rupees Two Hundred TwentyThree Paise Twenty Only

Page 189 Item No 1 (i) (b) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (b) 15 mm thick plaster 128.49 sqm 192 Rupees One Hundred NinetyTwo Only

Page 189 Item No 1 (ii) (c) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (c) 10 mm thick plaster 245.31 sqm 166.8 Rupees One Hundred SixtySix Paise Eighty Only

Page 192 Item no 1 Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. 18.16 sqm Rupees Fourty Paise Eighty Only

Page 54 Item No 17 18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m] 51.26 sqm 1248 Rupees One Thousand Two Hundred FourtyEight Only

Page 140 Item No 5 Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (vi) 100mm. X 50mm. X 1.25mm. 38 sqm 51.6 Rupees FiftyOne Paise Sixty Only

Page 144 Item No 25 Supplying anodised aluminium catch hook with eye fitted and fixed to shutter and chowkat complete of best quality: (ii) 150 mm long. 0 Each 44.4

Page 144 Item No 26 Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (iv) 150mm long x 10mm dia. bolt. 2 Each Rupees SeventyFive Paise Sixty Only

Page 144 Item No 26 Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: vi) 100mm long x 10mm dia. bolt. 16 Each 63.6 Rupees SixtyThree Paise Sixty Only

Page 141 Item No 10 i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (c) 300mm long. 1 Each 199.2 Rupees One Hundred NinetyNine Paise Twenty Only

Page 145 Item no 30 Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (v) 125 mm grip x 12 mm dia rod. 10 Each 114 Rupees One Hundred Fourteen Only

Page 117 Item No 1 Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. (iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm. (b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. 0.000 sqm 3452.4 Rupees Three Thousand Four Hundred FiftyTwo Paise Fourty Only

Page 197 Item No 17 Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Ground Floor (Two Coat) b) Premium 100% Acrylic Emulsion 535.09 sqm 102 Rupees One Hundred Two Only

Page 196 Item No 10 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats 0.999 sqm 85.2 Rupees EightyFive Paise Twenty Only

Page 106 Item No 18 Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) In ground floor. 4.8 sqm 5271.6

Page 200 Item No 1 (b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. 4.24 sqm 45.6 Rupees FourtyFive Paise Sixty Only

Page 200 Item No 1a (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. 3.12 sqm 36 Rupees ThirtySix Only

Page 200 Item No 2 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface : With other than hi-gloss of approved quality- (iv) Two coats (with any shade except white) 11.01 sqm 98.4 Rupees NinetyEight Paise Fourty Only

Page 200 Item No 2 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On steel or other metal surface : With other than hi-gloss of approved quality- (iv) Two coats (with any shade except white) 3.12 sqm 96 Rupees NinetySix Only

Page 104 Item No 13 (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. 0.600 Qntl 12343.2 Rupees Twelve Thousand Three Hundred FourtyThree Paise Twenty Only

Page 212 Item No 21 Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. m 313.2 Rupees Three Hundred Thirteen Paise Twenty Only

Page 6 Item No 10 Pre-Constructional Anti-termite measures: (c) Anti termite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 Litres per sq. m. of the surface before sand bed or sub-grade is laid. Holes upto 50 mm. to 75 mm. deep at 150 mm. centre to centre both ways shall be made with 12 mm, diameter mild steel rod on the surface to facilitate saturation of the soil with the chemical emulsion. The work shall be carried out as per specification described in para 6.4 of code IS- 6313 (part -II) 1981. ( Mode of measurment will be per Sq.m of plan area of plinth treated.) 344.51 sqm 81 Rupees EightyOne Only

Page 6 Item No 10 Pre-Constructional Anti-termite measures: (d) Treatment to the back filling of R.C.C. foundation with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight at the rate of 7.5 ltr. per sq.m. of the vertical surface of the substructure of each side of the foundation. The work shall be carried out as per specification as described in para 6.3.1 of code IS- 6313 (part-II) 1981 (Mode of measurement will be per sq.m. of vertical area of foundation treated). 196.31 sqm 94

Page 198 Item No 5 Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) 535.09 sqm 146.4 Rupees One Hundred FourtySix Paise Fourty Only

Page 196 Item No 8 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. 535.09 %sqm 5520 Rupees Five Thousand Five Hundred Twenty Only

Page 109 Item No 22 Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx) 16 m 7168.8 Rupees Seven Thousand One Hundred SixtyEight Paise Eighty Only

Page 47 Item no 3 Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. 250 sqm 28.8 Rupees TwentyEight Paise Eighty Only

Page 24 Item no 4 Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. (b) River bazree 25 cum 6370.8 Rupees Six Thousand Three Hundred Seventy Paise Eighty Only

Page 196 Item No 8 Supplying & Laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement,Footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material. (Border Concrete if necessary to be paid seperately). Note: Sub-grade CBR should not be less than 5. 250 sqm 1086 Rupees One Thousand EightySix Only

WEST BENGAL STATE RURAL DEVELOPMENT AGENCY, KALIMPONG DIVISION

PRICED SCHEDULE

District KALIMPONG

Name of Work PROPOSED GROUND FLOOR PLUS 4 STORIED SCHOOL BUILDING AT LAVA HIGH SCHOOL , KALIMPONG.

Sl No. Item No Page No Brief Description of Item Quantity Unit Rate (Rs) Amount (Rs)

Page 25 Item No 6.(ii) Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture] M 25 Grade (ii ) N.B. Variety (Stone Metal) 49.61 cum 8301.6

Page43-44 Item No 40 (a) (i) (I) Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods initial straightening and removal of loose rust (if necessary), cutting to requisite length hooking and bending to correct shape placing in proper position and binding with16G black annealed wire at every intersection as per drawing and direction.(a) For works in foundation and upto roof of ground floor/upto 4 m i) Tor Steel/ Mild Steel/ SAIL/TATA/RINL 0.200 MT 80338 Rupees Eighty Thousand Three Hundred ThirtyEight Only

Page 43 Item No 36 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs,beams,columns,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground ground floor) (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work 399.58 sqm 392 Rupees Three Hundred NinetyTwo Only

Page 15 Item No 7 Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth 0.89 cum 8463.6 Rupees Eight Thousand Four Hundred SixtyThree Paise Sixty Only

Page 16 Item no 17 125 mm thick brick work with 1st class bricks in cement morter (4:1) in ground floor 126.39 sqm Rupees One Thousand FiftyTwo Paise Fourty Only

Page 114 Item No 1 Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). 0.000 cum 98563.2 Rupees NinetyEight Thousand Five Hundred SixtyThree Paise Twenty Only

Page 140 Item No 4 Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (b) 40mm X 6mm, 200mm Length 40 Each 31.2 Rupees ThirtyOne Paise Twenty Only

Page 189 Item No 1 (i) (a) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (a) 20 mm thick plaster 196.95 sqm 228 Rupees Two Hundred TwentyEight Only

Page 189 Item No 1 (i) (b) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (b) 15 mm thick plaster 196.95 sqm 196.8 Rupees One Hundred NinetySix Paise Eighty Only

Page 189 Item No 1 (ii) (c) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (c) 10 mm thick plaster 245.05 sqm 171.6 Rupees One Hundred SeventyOne Paise Sixty Only

Page 192 Item no 1 Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. 17.68 sqm Rupees Fourty Paise Eighty Only

Page 54 Item No 17 18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m] 0.000 sqm 1248 Rupees One Thousand Two Hundred FourtyEight Only

Page 140 Item No 5 Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (vi) 100mm. X 50mm. X 1.25mm. 68 Each 51.6 Rupees FiftyOne Paise Sixty Only

Page 144 Item No 25 Supplying anodised aluminium catch hook with eye fitted and fixed to shutter and chowkat complete of best quality: (ii) 150 mm long. Each 44.4

Page 144 Item No 26 Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (iv) 150mm long x 10mm dia. bolt. 4 Each Rupees SeventyFive Paise Sixty Only

Page 144 Item No 26 Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: vi) 100mm long x 10mm dia. bolt. 28 Each 63.6 Rupees SixtyThree Paise Sixty Only

Page 141 Item No 10 i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (c) 300mm long. 2 Each 199.2 Rupees One Hundred NinetyNine Paise Twenty Only

Page 145 Item no 30 Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (v) 125 mm grip x 12 mm dia rod. 18 Each 114 Rupees One Hundred Fourteen Only

Page 117 Item No 1 Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. (iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm. (b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. 7.975 sqm 3487.2 Rupees Three Thousand Four Hundred EightySeven Paise Twenty Only

Page 197 Item No 17 Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Ground Floor (Two Coat) b) Premium 100% Acrylic Emulsion 509.4 sqm 102.85 Rupees One Hundred Two Paise EightyFive Only

Page 196 Item No 10 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats 0.000 sqm 85.2 Rupees EightyFive Paise Twenty Only

Page 106 Item No 18 Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) In ground floor. 8.64 sqm 5324.32

Page 200 Item No 1 (b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. 7.98 sqm 45.6 Rupees FourtyFive Paise Sixty Only

Page 200 Item No 1a (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. 14.8 sqm 36 Rupees ThirtySix Only

Page 200 Item No 2 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface : With other than hi-gloss of approved quality- (iv) Two coats (with any shade except white) 20.735 sqm 98.4 Rupees NinetyEight Paise Fourty Only

Page 200 Item No 2 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On steel or other metal surface : With other than hi-gloss of approved quality- (iv) Two coats (with any shade except white) 6.16 sqm 96 Rupees NinetySix Only

Page 104 Item No 13 (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. 0.400 Qntl 12466.63 Rupees Twelve Thousand Four Hundred SixtySix Paise SixtyThree Only

Page 212 Item No 21 Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. 21.6 m 313.2 Rupees Three Hundred Thirteen Paise Twenty Only

Page 198 Item No 5 Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) 509.4 sqm 147.26

Page 196 Item No 8 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. 509.4 %sqm 5520.85

Page 109 Item No 22 Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx) 16 m 7168.8

WEST BENGAL STATE RURAL DEVELOPMENT AGENCY, KALIMPONG DIVISION

PRICED SCHEDULE

District KALIMPONG

Name of Work PROPOSED GROUND FLOOR PLUS 4 STORIED SCHOOL BUILDING AT LAVA HIGH SCHOOL , KALIMPONG.

Sl No. Item No Page No Brief Description of Item Quantity Unit Rate (Rs) Amount (Rs)

3. SECOND FLOOR

3.01 Page 1 Item No 2.a Earth work in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75m.as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation exceeding 1500 mm 145.62 %cum 11927

Page 1 Item No 2.b Earth work in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75m.as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (b) Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring. 54.74 %cum 19238 Rupees Nineteen Thousand Two Hundred ThirtyEight Only

Page 1 Item No 3.a Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150mm including watering and ramming etc. layer by layer complete. 40.07 %cum 7754 Rupees Seven Thousand Seven Hundred FiftyFour Only

Page 2 Item no 4.b Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) 50.66 %cum 176473 Rupees One Lakh SeventySix Thousand Four Hundred SeventyThree Only

Page14 Item No 1 Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. 236.03 sqm 530.4 Rupees Five Hundred Thirty Paise Fourty Only

Page 34 Item No 22 II (a) Cement concrete with 30mm down graded shingles excluding shuttering. 17.7 cum 5971.2 Rupees Five Thousand Nine Hundred SeventyOne Paise Twenty Only

Page 25 Item No 6.(ii) Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture] M 25 Grade (ii ) N.B. Variety (Stone Metal) cum 8415.6 Rupees Eight Thousand Four Hundred Fifteen Paise Sixty Only

Page43-44 Item No 40 (a) (i) (I) Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods initial straightening and removal of loose rust (if necessary), cutting to requisite length hooking and bending to correct shape placing in proper position and binding with16G black annealed wire at every intersection as per drawing and direction.(a) For works in foundation and upto roof of ground floor/upto 4 m i) Tor Steel/ Mild Steel/ SAIL/TATA/RINL 0.999 MT 80854.8 Rupees Eighty Thousand Eight Hundred FiftyFour Paise Eighty Only

Page 43 Item No 36 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs,beams,columns,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground ground floor) (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work 200.16 sqm 374 Rupees Three Hundred SeventyFour Only

Page 42 Item No 36.c Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs,beams,columns,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground ground floor) (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work 633.74 sqm 410 Rupees Four Hundred Ten Only

Page 15 Item No 7 Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth 0.999 cum Rupees Eight Thousand Five Hundred NinetySix Paise Eighty Only

Page 16 Item no 17 125 mm thick brick work with 1st class bricks in cement morter (4:1) in ground floor 241.67 sqm 1066.8 Rupees One Thousand SixtySix Paise Eighty Only

Page 114 Item No 1 Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). 0.000 cum 98803.22 Rupees NinetyEight Thousand Eight Hundred Three Paise TwentyTwo Only

Page 140 Item No 4 Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (b) 40mm X 6mm, 200mm Length 76 Each 31.2 Rupees ThirtyOne Paise Twenty Only

Page 189 Item No 1 (i) (a) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (a) 20 mm thick plaster 335.4 sqm 232.8 Rupees Two Hundred ThirtyTwo Paise Eighty Only

Page 189 Item No 1 (i) (b) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (b) 15 mm thick plaster sqm 201.6 Rupees Two Hundred One Paise Sixty Only

Page 189 Item No 1 (ii) (c) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (c) 10 mm thick plaster 385.24 sqm 176.4 Rupees One Hundred SeventySix Paise Fourty Only

Page 192 Item no 1 Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. 19.36 sqm Rupees Fourty Paise Eighty Only

Page 54 Item No 17 18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m] 0.000 sqm 1248 Rupees One Thousand Two Hundred FourtyEight Only

Page 140 Item No 5 Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (vi) 100mm. X 50mm. X 1.25mm. 104 sqm 51.6 Rupees FiftyOne Paise Sixty Only

Page 144 Item No 25 Supplying anodised aluminium catch hook with eye fitted and fixed to shutter and chowkat complete of best quality: (ii) 150 mm long. 28 Each 44.4 Rupees FourtyFour Paise Fourty Only

Page 144 Item No 26 Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (iv) 150mm long x 10mm dia. bolt. 16 Each Rupees SeventyFive Paise Sixty Only

Page 144 Item No 26 Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: vi) 100mm long x 10mm dia. bolt. 28 Each 63.6 Rupees SixtyThree Paise Sixty Only

Page 141 Item No 10 i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (c) 300mm long. 8 Each 199.2 Rupees One Hundred NinetyNine Paise Twenty Only

Page 145 Item no 30 Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (v) 125 mm grip x 12 mm dia rod. 30 Each 114 Rupees One Hundred Fourteen Only

Page 117 Item No 1 Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. (iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm. (b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. 21.505 sqm 3522 Rupees Three Thousand Five Hundred TwentyTwo Only

Page 197 Item No 17 Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Ground Floor (Two Coat) b) Premium 100% Acrylic Emulsion 0.000 sqm 103.7 Rupees One Hundred Three Paise Seventy Only

Page 196 Item No 10 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats 1031.74 sqm 85.2 Rupees EightyFive Paise Twenty Only

Page 106 Item No 18 Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) In ground floor. 8.64 sqm 5377.03

Page 200 Item No 1 (b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. 21.51 sqm 45.6 Rupees FourtyFive Paise Sixty Only

Page 200 Item No 1a (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. sqm 36 Rupees ThirtySix Only

Page 200 Item No 2 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface : With other than hi-gloss of approved quality- (iv) Two coats (with any shade except white) 55.91 sqm 98.4 Rupees NinetyEight Paise Fourty Only

Page 200 Item No 2 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On steel or other metal surface : With other than hi-gloss of approved quality- (iv) Two coats (with any shade except white) 27.2 sqm 96 Rupees NinetySix Only

Page 104 Item No 13 (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. 0.600 Qntl 12590.06 Rupees Twelve Thousand Five Hundred Ninety Paise Six Only

Page 212 Item No 21 Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. 21.6 m 313.2 Rupees Three Hundred Thirteen Paise Twenty Only

Page 198 Item No 5 Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) 0.000 sqm 148.13 Rupees One Hundred FourtyEight Paise Thirteen Only

Page 196 Item No 8 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. 0.000 %sqm 5521.7 Rupees Five Thousand Five Hundred TwentyOne Paise Seventy Only

Page 109 Item No 22 Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx) 16 m 7168.8 Rupees Seven Thousand One Hundred SixtyEight Paise Eighty Only

WEST BENGAL STATE RURAL DEVELOPMENT AGENCY, KALIMPONG DIVISION

PRICED SCHEDULE

District KALIMPONG

Name of Work PROPOSED GROUND FLOOR PLUS 4 STORIED SCHOOL BUILDING AT LAVA HIGH SCHOOL , KALIMPONG.

Sl No. Item No Page No Brief Description of Item Quantity Unit Rate (Rs) Amount (Rs)

4.01 Page 25 Item No 6.(ii) Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture] M 25 Grade (ii ) N.B. Variety (Stone Metal) 84.3 cum 8529.6

Page43-44 Item No 40 (a) (i) (I) Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods initial straightening and removal of loose rust (if necessary), cutting to requisite length hooking and bending to correct shape placing in proper position and binding with16G black annealed wire at every intersection as per drawing and direction.(a) For works in foundation and upto roof of ground floor/upto 4 m i) Tor Steel/ Mild Steel/ SAIL/TATA/RINL 0.000 MT 81370.8 Rupees EightyOne Thousand Three Hundred Seventy Paise Eighty Only

Page 43 Item No 36 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs,beams,columns,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground ground floor) (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work 664.14 sqm 428 Rupees Four Hundred TwentyEight Only

Page 15 Item No 7 Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth 0.999 cum 8730 Rupees Eight Thousand Seven Hundred Thirty Only

Page 16 Item no 17 125 mm thick brick work with 1st class bricks in cement morter (4:1) in ground floor 222.59 sqm 1081.2 Rupees One Thousand EightyOne Paise Twenty Only

Page 114 Item No 1 Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). 0.999 cum 99043.2 Rupees NinetyNine Thousand FourtyThree Paise Twenty Only

Page 140 Item No 4 Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (b) 40mm X 6mm, 200mm Length 110 Each 31.2 Rupees ThirtyOne Paise Twenty Only

Page 189 Item No 1 (i) (a) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (a) 20 mm thick plaster 394.08 sqm 237.6 Rupees Two Hundred ThirtySeven Paise Sixty Only

Page 189 Item No 1 (i) (b) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (b) 15 mm thick plaster 372.48 sqm 206.4 Rupees Two Hundred Six Paise Fourty Only

Page 189 Item No 1 (ii) (c) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (c) 10 mm thick plaster 415.64 sqm 181.2 Rupees One Hundred EightyOne Paise Twenty Only

Page 192 Item no 1 Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. 19.36 sqm Rupees Fourty Paise Eighty Only

Page 54 Item No 17 18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m] 0.000 sqm 1248 Rupees One Thousand Two Hundred FourtyEight Only

Page 140 Item No 5 Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (vi) 100mm. X 50mm. X 1.25mm. 178 Each 51.6 Rupees FiftyOne Paise Sixty Only

Page 144 Item No 25 Supplying anodised aluminium catch hook with eye fitted and fixed to shutter and chowkat complete of best quality: (ii) 150 mm long. 68 Each 44.4 Rupees FourtyFour Paise Fourty Only

Page 144 Item No 26 Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (iv) 150mm long x 10mm dia. bolt. 14 Each Rupees SeventyFive Paise Sixty Only

Page 144 Item No 26 Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: vi) 100mm long x 10mm dia. bolt. 68 Each 63.6 Rupees SixtyThree Paise Sixty Only

Page 141 Item No 10 i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (c) 300mm long. 7 Each 199.2 Rupees One Hundred NinetyNine Paise Twenty Only

Page 145 Item no 30 Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (v) 125 mm grip x 12 mm dia rod. 48 Each 114 Rupees One Hundred Fourteen Only

Page 117 Item No 1 Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. (iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm. (b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. 24.2 sqm 3556.8 Rupees Three Thousand Five Hundred FiftySix Paise Eighty Only

Page 197 Item No 17 Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Ground Floor (Two Coat) b) Premium 100% Acrylic Emulsion 0.000 sqm 104.56 Rupees One Hundred Four Paise FiftySix Only

Page 196 Item No 10 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats 913.04 sqm 85.2 Rupees EightyFive Paise Twenty Only

Page 106 Item No 18 Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) In ground floor. 8.64 sqm 5429.75

Page 200 Item No 1 (b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. 24.2 sqm 45.6 Rupees FourtyFive Paise Sixty Only

Page 200 Item No 1a (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. sqm 36 Rupees ThirtySix Only

Page 200 Item No 2 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface : With other than hi-gloss of approved quality- (iv) Two coats (with any shade except white) 62.92 sqm 98.4 Rupees NinetyEight Paise Fourty Only

Page 200 Item No 2 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On steel or other metal surface : With other than hi-gloss of approved quality- (iv) Two coats (with any shade except white) 27.2 sqm 96 Rupees NinetySix Only

Page 104 Item No 13 (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. 0.600 Qntl 12713.5 Rupees Twelve Thousand Seven Hundred Thirteen Paise Fifty Only

Page 212 Item No 21 Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. 21.6 m 313.2 Rupees Three Hundred Thirteen Paise Twenty Only

Page 198 Item No 5 Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) 0.000 sqm 148.13 Rupees One Hundred FourtyEight Paise Thirteen Only

Page 196 Item No 8 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. 0.000 %sqm 5521.7 Rupees Five Thousand Five Hundred TwentyOne Paise Seventy Only

Page 109 Item No 22 Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx) 16 m 7168.8 Rupees Seven Thousand One Hundred SixtyEight Paise Eighty Only

WEST BENGAL STATE RURAL DEVELOPMENT AGENCY, KALIMPONG DIVISION

PRICED SCHEDULE

District KALIMPONG

Name of Work PROPOSED GROUND FLOOR PLUS 4 STORIED SCHOOL BUILDING AT LAVA HIGH SCHOOL , KALIMPONG.

Sl No. Item No Page No Brief Description of Item Quantity Unit Rate (Rs) Amount (Rs)

5. FOURTH FLOOR

5.01 Page 25 Item No 6.(ii) Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture] M 25 Grade (ii ) N.B. Variety (Stone Metal) 84.3 cum 8643.6

Page43-44 Item No 40 (a) (i) (I) Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods initial straightening and removal of loose rust (if necessary), cutting to requisite length hooking and bending to correct shape placing in proper position and binding with16G black annealed wire at every intersection as per drawing and direction.(a) For works in foundation and upto roof of ground floor/upto 4 m i) Tor Steel/ Mild Steel/ SAIL/TATA/RINL 0.000 MT 81886.8 Rupees EightyOne Thousand Eight Hundred EightySix Paise Eighty Only

Page 43 Item No 36 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs,beams,columns,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground ground floor) (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work 664.14 sqm 446 Rupees Four Hundred FourtySix Only

Page 15 Item No 7 Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth 0.999 cum Rupees Eight Thousand Eight Hundred SixtyThree Paise Twenty Only

Page 16 Item no 17 125 mm thick brick work with 1st class bricks in cement morter (4:1) in ground floor 222.59 sqm Rupees One Thousand NinetyFive Paise Sixty Only

Page 114 Item No 1 Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). 0.999 cum 99283.2 Rupees NinetyNine Thousand Two Hundred EightyThree Paise Twenty Only

Page 140 Item No 4 Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (b) 40mm X 6mm, 200mm Length 110 Each 31.2 Rupees ThirtyOne Paise Twenty Only

Page 189 Item No 1 (i) (a) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (a) 20 mm thick plaster 394.08 sqm 242.4 Rupees Two Hundred FourtyTwo Paise Fourty Only

Page 189 Item No 1 (i) (b) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (b) 15 mm thick plaster 372.48 sqm 211.2 Rupees Two Hundred Eleven Paise Twenty Only

Page 189 Item No 1 (ii) (c) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (c) 10 mm thick plaster 415.64 sqm 186 Rupees One Hundred EightySix Only

Page 192 Item no 1 Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. 19.36 sqm Rupees Fourty Paise Eighty Only

Page 54 Item No 17 18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m] 0.000 sqm 1248 Rupees One Thousand Two Hundred FourtyEight Only

Page 140 Item No 5 Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (vi) 100mm. X 50mm. X 1.25mm. 178 Each 51.6 Rupees FiftyOne Paise Sixty Only

Page 144 Item No 25 Supplying anodised aluminium catch hook with eye fitted and fixed to shutter and chowkat complete of best quality: (ii) 150 mm long. 68 Each 44.4 Rupees FourtyFour Paise Fourty Only

Page 144 Item No 26 Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (iv) 150mm long x 10mm dia. bolt. 14 Each Rupees SeventyFive Paise Sixty Only

Page 144 Item No 26 Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: vi) 100mm long x 10mm dia. bolt. 68 Each 63.6 Rupees SixtyThree Paise Sixty Only

Page 141 Item No 10 i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (c) 300mm long. 7 Each 199.2 Rupees One Hundred NinetyNine Paise Twenty Only

Page 145 Item no 30 Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (v) 125 mm grip x 12 mm dia rod. 48 Each 114 Rupees One Hundred Fourteen Only

Page 117 Item No 1 Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. (iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm. (b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. 24.2 sqm 3591.6 Rupees Three Thousand Five Hundred NinetyOne Paise Sixty Only

Page 197 Item No 17 Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Ground Floor (Two Coat) b) Premium 100% Acrylic Emulsion 0.000 sqm 105.41 Rupees One Hundred Five Paise FourtyOne Only

Page 196 Item No 10 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats 913.04 sqm 85.2 Rupees EightyFive Paise Twenty Only

Page 106 Item No 18 Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) In ground floor. 8.64 sqm 5482.46

Page 200 Item No 1 (b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. 24.2 sqm 45.6 Rupees FourtyFive Paise Sixty Only

Page 200 Item No 1a (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. sqm 36 Rupees ThirtySix Only

Page 200 Item No 2 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface : With other than hi-gloss of approved quality- (iv) Two coats (with any shade except white) 62.92 sqm 98.4 Rupees NinetyEight Paise Fourty Only

Page 200 Item No 2 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On steel or other metal surface : With other than hi-gloss of approved quality- (iv) Two coats (with any shade except white) 27.2 sqm 96 Rupees NinetySix Only

Page 104 Item No 13 (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. 0.600 Qntl 12836.93 Rupees Twelve Thousand Eight Hundred ThirtySix Paise NinetyThree Only

Page 212 Item No 21 Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. 21.6 m 313.2 Rupees Three Hundred Thirteen Paise Twenty Only

Page 198 Item No 5 Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) 0.000 sqm 148.99 Rupees One Hundred FourtyEight Paise NinetyNine Only

Page 196 Item No 8 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. 0.000 %sqm 5522.56 Rupees Five Thousand Five Hundred TwentyTwo Paise FiftySix Only

Page 109 Item No 22 Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx) 16 m 7168.8 Rupees Seven Thousand One Hundred SixtyEight Paise Eighty Only

WEST BENGAL STATE RURAL DEVELOPMENT AGENCY, KALIMPONG DIVISION

PRICED SCHEDULE

District KALIMPONG

Name of Work PROPOSED GROUND FLOOR PLUS 4 STORIED SCHOOL BUILDING AT LAVA HIGH SCHOOL , KALIMPONG.

Sl No. Item No Page No Brief Description of Item Quantity Unit Rate (Rs) Amount (Rs)

6.TOP FLOOR (MUMTY ROOM)

6.01 Page 25 Item No 6.(ii) Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture] M 25 Grade (ii ) N.B. Variety (Stone Metal) 22.83 cum 8643.6

Page43-44 Item No 40 (a) (i) (I) Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods initial straightening and removal of loose rust (if necessary), cutting to requisite length hooking and bending to correct shape placing in proper position and binding with16G black annealed wire at every intersection as per drawing and direction.(a) For works in foundation and upto roof of ground floor/upto 4 m i) Tor Steel/ Mild Steel/ SAIL/TATA/RINL 0.000 MT 81886.8 Rupees EightyOne Thousand Eight Hundred EightySix Paise Eighty Only

Page 43 Item No 36 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs,beams,columns,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground ground floor) (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work 183.22 sqm 446 Rupees Four Hundred FourtySix Only

Page 15 Item No 7 Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth 0.59 cum Rupees Eight Thousand Eight Hundred SixtyThree Paise Twenty Only

Page 16 Item no 17 125 mm thick brick work with 1st class bricks in cement morter (4:1) in ground floor 48.03 sqm Rupees One Thousand NinetyFive Paise Sixty Only

Page 189 Item No 1 (i) (a) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (a) 20 mm thick plaster sqm 242.4 Rupees Two Hundred FourtyTwo Paise Fourty Only

Page 189 Item No 1 (i) (b) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (b) 15 mm thick plaster sqm 211.2 Rupees Two Hundred Eleven Paise Twenty Only

Page 189 Item No 1 (ii) (c) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (c) 10 mm thick plaster 0.999 sqm 186 Rupees One Hundred EightySix Only

Page 192 Item no 1 Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. 1.68 sqm Rupees Fourty Paise Eighty Only

Page 54 Item No 17 18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m] 267.67 sqm 1150.8 Rupees One Thousand One Hundred Fifty Paise Eighty Only

Page 197 Item No 17 Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Ground Floor (Two Coat) b) Premium 100% Acrylic Emulsion 0.000 sqm 105.41

Page 196 Item No 10 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats 221.18 sqm 85.2 Rupees EightyFive Paise Twenty Only

Page 106 Item No 18 Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) In ground floor. 8.64 sqm 5482.46 Rupees Five Thousand Four Hundred EightyTwo Paise FourtySix Only

Page 200 Item No 1a (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. 8.64 sqm 36 Rupees ThirtySix Only

Page 200 Item No 2 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On steel or other metal surface : With other than hi-gloss of approved quality- (iv) Two coats (with any shade except white) 8.64 sqm 96 Rupees NinetySix Only

Page 212 Item No 21 Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. 21.6 m 313.2 Rupees Three Hundred Thirteen Paise Twenty Only

Page 198 Item No 5 Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) 0.000 sqm Rupees One Hundred FourtyNine Paise EightySix Only

Page 196 Item No 8 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. 0.000 %sqm 5523.41 Rupees Five Thousand Five Hundred TwentyThree Paise FourtyOne Only

Page 82 Item No 14 Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work). 0.999 m2 1075.2 Rupees One Thousand SeventyFive Paise Twenty Only

Page 82 Item No 14 M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof. 0.999 MT 90477.91 Rupees Ninety Thousand Four Hundred SeventySeven Paise NinetyOne Only

WEST BENGAL STATE RURAL DEVELOPMENT AGENCY, KALIMPONG DIVISION

PRICED SCHEDULE

District KALIMPONG

Name of Work PROPOSED GROUND FLOOR PLUS 4 STORIED SCHOOL BUILDING AT LAVA HIGH SCHOOL , KALIMPONG.

Sl No. Item No Page No Brief Description of Item Quantity Unit Rate (Rs) Amount (Rs)

7.RETAINING WALL

7.01 Page 1 Item No 2.a Earth work in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75m.as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation exceeding 1500 mm 159.51 %cum 11927

Page 1 Item No 3.a Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150mm including watering and ramming etc. layer by layer complete. 31.9 %cum 7754 Rupees Seven Thousand Seven Hundred FiftyFour Only

Page14 Item No 1 Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. 335.94 sqm 530.4 Rupees Five Hundred Thirty Paise Fourty Only

Page 34 Item No 22 II (a) Cement concrete with 30mm down graded shingles excluding shuttering. cum 5971.2 Rupees Five Thousand Nine Hundred SeventyOne Paise Twenty Only

Page 25 Item No 6.(ii) Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture] M 25 Grade (ii ) N.B. Variety (Stone Metal) 368.87 cum 8187.6 Rupees Eight Thousand One Hundred EightySeven Paise Sixty Only

Page 25 Item No 6.(ii) Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture] M 25 Grade (ii ) N.B. Variety (Stone Metal) 78.08 cum 8301.6 Rupees Eight Thousand Three Hundred One Paise Sixty Only

Page43-44 Item No 40 (a) (i) (I) Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods initial straightening and removal of loose rust (if necessary), cutting to requisite length hooking and bending to correct shape placing in proper position and binding with16G black annealed wire at every intersection as per drawing and direction.(a) For works in foundation and upto roof of ground floor/upto 4 m i) Tor Steel/ Mild Steel/ SAIL/TATA/RINL 0.999 MT 79822.8 Rupees SeventyNine Thousand Eight Hundred TwentyTwo Paise Eighty Only

Page 43 Item No 36 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs,beams,columns,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground ground floor) (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work 1374.43 sqm 374 Rupees Three Hundred SeventyFour Only

Page 212 Item No 21 Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. 180 m 313.2 Rupees Three Hundred Thirteen Paise Twenty Only

WEST BENGAL STATE RURAL DEVELOPMENT AGENCY, KALIMPONG DIVISION

PRICED SCHEDULE

District KALIMPONG

Name of Work PROPOSED GROUND FLOOR PLUS 4 STORIED SCHOOL BUILDING AT LAVA HIGH SCHOOL , KALIMPONG.

Sl No. Item No Page No Brief Description of Item Quantity Unit Rate (Rs) Amount (Rs)

8. PLINTH PROTECTION, SURFACE DRAIN & LAND DEVELOPMENT

8.01 Page 1 Item No 2.a Earth work in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75m.as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation exceeding 1500 mm %cum 11927

Page 1 Item No 3.a Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150mm including watering and ramming etc. layer by layer complete. %cum 7754 Rupees Seven Thousand Seven Hundred FiftyFour Only

Page14 Item No 1 Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. 245.86 sqm 530.4 Rupees Five Hundred Thirty Paise Fourty Only

Page 34 Item No 22 II (a) Cement concrete with 30mm down graded shingles excluding shuttering. 20.32 cum 5971.2 Rupees Five Thousand Nine Hundred SeventyOne Paise Twenty Only

Page 15 Item No 7 Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth 22.6 cum 8062.8 Rupees Eight Thousand SixtyTwo Paise Eighty Only

Page 189 Item No 1 (i) (b) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (b) 15 mm thick plaster 135.63 sqm 192 Rupees One Hundred NinetyTwo Only

Page 40 Item No 28 3rd Corrigenda Precast pierced concrete jally work as per design and manufacturer's specification including moulding etc. with stone chips and necessary reinforcement shuttering complete including fitting, fixing in position in all floors. a) 50 mm. thick panels 90.42 sqm 430.8 Rupees Four Hundred Thirty Paise Eighty Only

Page 25 Item No 6.(ii) Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture] M 25 Grade (ii ) N.B. Variety (Stone Metal) 44.16 cum 8187.6 Rupees Eight Thousand One Hundred EightySeven Paise Sixty Only

Page43-44 Item No 40 (a) (i) (I) Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods initial straightening and removal of loose rust (if necessary), cutting to requisite length hooking and bending to correct shape placing in proper position and binding with16G black annealed wire at every intersection as per drawing and direction.(a) For works in foundation and upto roof of ground floor/upto 4 m i) Tor Steel/ Mild Steel/ SAIL/TATA/RINL 0.999 MT 79822.8 Rupees SeventyNine Thousand Eight Hundred TwentyTwo Paise Eighty Only

Page 43 Item No 36 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs,beams,columns,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground ground floor) (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work 163 sqm 374 Rupees Three Hundred SeventyFour Only

Page 74 Item No 48 Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material. [Border concrete if necessary to be paid separately]. Note: Sub-grade CBR should not be less than 5. 344.56 sqm 1329 Rupees One Thousand Three Hundred TwentyNine Only

Page 74 Item No 46 Supplying and laying chequered tiles of any shade & of approved quality with (1:1½:3) cement concrete laid in panels or patterns as directed in pavement, footpath etc. including necessary underlay 25 mm thick [avg] cement mortar (1:3) complete in all respect with all labour and materials. [Using cement slurry @ 4.4 kg/Sq.m at back side and @2.4 kg/Sq.m for joint filling] 45 sqm 463 Rupees Four Hundred SixtyThree Only

Page 109 Item No 22 Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx) 108 m 5974 Rupees Five Thousand Nine Hundred SeventyFour Only

Page 27 Item No 11 Plum concrete work with 40 % cement concrete with 30 mm down graded stone metal and 60 % stone boulder of size 150 mm and above, placed in position as directed excluding shuttering if any 585.59 CUM 3964.8 Rupees Three Thousand Nine Hundred SixtyFour Paise Eighty Only

WEST BENGAL STATE RURAL DEVELOPMENT AGENCY, KALIMPONG DIVISION

PRICED SCHEDULE

District KALIMPONG

Name of Work PROPOSED GROUND FLOOR PLUS 4 STORIED SCHOOL BUILDING AT LAVA HIGH SCHOOL , KALIMPONG.

Sl No. Item No Page No Brief Description of Item Quantity Unit Rate (Rs) Amount (Rs)

9. SANITARY & PLUMBING

9.01 Page 87 Item No 1.(ii) Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. 1 Each 68382

Page 88-89 Item No 3.ii.B Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code. 1 Each 19156 Rupees Nineteen Thousand One Hundred FiftySix Only

Page 89 Item No 4(iii) Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials.With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia. 4 Each 12430 Rupees Twelve Thousand Four Hundred Thirty Only

Page 79 Item No 5 Suppling, fitting and fixing Wall mounted water closet of white glazed vitreous chinaware of approved make and brand in position complete with necessary nut and boalts (Equivalent to Code No. 20061 or 92065 & Model Studio or Rubbic of Hindware or equivalent.) 9 Each 5264.16 Rupees Five Thousand Two Hundred SixtyFour Paise Sixteen Only

Page 79 Item No 4 Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing). (i) 580 mm X 440 mm 9 Each 2129.16 Rupees Two Thousand One Hundred TwentyNine Paise Sixteen Only

Page 65 Item No 14 Supplying,fitting and fixing cast iron 'P' or 'S' trap conformimg to I.S. 3989/ 2009 and 1729/ 2002 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid seperately). (A) 'P' Trap (iii) 100 mm 9 Each Rupees One Thousand Two Hundred FiftyOne Paise ThirtySix Only

Page 36 Item No 1 Supplying, fitting and fixing 10 litre porcelain low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internnal PVC fittings. White 18 Each 3032.04 Rupees Three Thousand ThirtyTwo Paise Four Only

Page 80 Item No 6 Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (i) 635 mm X 395 mm X 420 mm 11 Each 3787.08 Rupees Three Thousand Seven Hundred EightySeven Paise Eight Only

Page 80 Item No 7 Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). (i) 450 mm X 350 mm 4 Each 1162.92 Rupees One Thousand One Hundred SixtyTwo Paise NinetyTwo Only

Page 82 Item No 19 Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm 9 Each 809.16 Rupees Eight Hundred Nine Paise Sixteen Only

Page 82 Item No 17 Supplying, fitting and fixing liquid soap container. (a) Cromium plated. 9 518.76

Page 82 Item No 17 Supplying, fitting and fixing towel rail with two brackets. (a) C.P. over brass (iii) 25 mm dia. and 750 mm long 18 627

Page 41 Item No 2 Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. (iii) 630 mm X 450 mm size 11 m 4303.2

Page 12 Item No 19(i) Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work 40 mm dia medium quality 105 m 385.44 Rupees Three Hundred EightyFive Paise FourtyFour Only

Page 12 Item No 19(i) Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work 25 mm 60 m 233.64 Rupees Two Hundred ThirtyThree Paise SixtyFour Only

Page 12 Item No 19(i) Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (b) For Concealed Work 15 mm 80 m Rupees Three Hundred Fourteen Paise Sixteen Only

Page 12 Item No 19(i) Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (b) For Concealed Work 25 mm 40 m 351.12 Rupees Three Hundred FiftyOne Paise Twelve Only

Page 6 Item No 7 Supplying, fitting and fixing bib cock or stop cock. c) (i) Chromium plated Bib Cock (angular shape with wall flange) (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar brand). 22 Each 1136.52 Rupees One Thousand One Hundred ThirtySix Paise FiftyTwo Only

Page 6 Item No 7 Supplying, fitting and fixing bib cock or stop cock. d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). 40 Each 1075.8 Rupees One Thousand SeventyFive Paise Eighty Only

Page 74 Item No 24 Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin- charge. (Payment will be made on centre line measurement of the total pipeline including specials. (ii) 110 mm dia. 80 Each Rupees SeventyFive Paise TwentyFour Only

Page 74 Item No 24 Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin- charge. (Payment will be made on centre line measurement of the total pipeline including specials. (iii) 160 mm dia. 80 Each 87.12 Rupees EightySeven Paise Twelve Only

Page 37 Item No 6 Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (c) 1500 litre capacity 4 Each Rupees Ten Thousand Three Hundred FourtyEight Paise Eighty Only

Page No 37 Item No 8 Supplying, fitting and fixing cast iron raised rain proof tank cover 500 mm dia. with locking arrangements (weighing not less than 12 kg). 4 Each 1667.16

Page 37 Item No 10 Labour for hoisting plastic water storage tank. (i) Upto 1500 litre capacity. (a) Upto 1st story from G.L. 4 m 297 Rupees Two Hundred NinetySeven Only

Page 64 Item No 9 Supplying, fitting & fixing approved patent vent cowl I.C.I. conforming to I.S.S and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately). (i) 100 mm dia. 4 m 484.44 Rupees Four Hundred EightyFour Paise FourtyFour Only

Page 68 Item No 23 Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length (b) 110 mm 105 Each 385.44 Rupees Three Hundred EightyFive Paise FourtyFour Only

Page 68 Item No 23 Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length (c) 160 mm 48 Each 720.72 Rupees Seven Hundred Twenty Paise SeventyTwo Only

Page 68 Item No 23 Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length Door Tee 110 mm 8 Each Rupees Two Hundred FiftySeven Paise Fourty Only

Page 68 Item No 23 Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length Door Tee 160 mm 8 Each 678.48 Rupees Six Hundred SeventyEight Paise FourtyEight Only

Page 68 Item No 23 Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length Nahani Trap 90 mm 9 Each 138.6 Rupees One Hundred ThirtyEight Paise Sixty Only

Page 68 Item No 23 Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length Bend 87.5º (b) 110 mm 20 Each 158.4 Rupees One Hundred FiftyEight Paise Fourty Only

Page 81 Item No 10 Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (ii) Plastic (hallow type) white 9 Each Rupees Six Hundred Fourty Paise Twenty Only

Page 43 Item No 9 Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (iii) 600 mm long 40 m 141.24 Rupees One Hundred FourtyOne Paise TwentyFour Only

Page No 4 Item No 4 Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). (v) 40 mm dia 8 Each

Page No 64 Item No 35 (Building 3rd Corrigenda) Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative 23.22 Each 956.4 Rupees Nine Hundred FiftySix Paise Fourty Only

Page No 64 Item No 35 (Building 3rd Corrigenda) Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative 26.1 Each 962.4 Rupees Nine Hundred SixtyTwo Paise Fourty Only

Page No 64 Item No 35 (Building 3rd Corrigenda) Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative 27.56 Each 968.4 Rupees Nine Hundred SixtyEight Paise Fourty Only

Page No 64 Item No 35 (Building 3rd Corrigenda) Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative 27.56 Each 974.4 Rupees Nine Hundred SeventyFour Paise Fourty Only

Page No 64 Item No 35 (Building 3rd Corrigenda) Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative 90.4 Each 961.2 Rupees Nine Hundred SixtyOne Paise Twenty Only

Page No 64 Item No 35 (Building 3rd Corrigenda) Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative 86.8 Each 967.2 Rupees Nine Hundred SixtySeven Paise Twenty Only

Page No 64 Item No 35 (Building 3rd Corrigenda) Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative 88.8 Each 973.2 Rupees Nine Hundred SeventyThree Paise Twenty Only

Page No 64 Item No 35 (Building 3rd Corrigenda) Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative 88.8 Each 979.2 Rupees Nine Hundred SeventyNine Paise Twenty Only

Page No 116 Item No 5 (Building) Supplying, Fitting & Fixing Factory made prelaminated P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm Prelaminated PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge,weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer‟s specification and direction of Engineer-in-Charge. 128.25 Each 481.2 Rupees Four Hundred EightyOne Paise Twenty Only

Page No 133 Item No 26 (Building) PVC 26 Door Shutter-37 mm thick: Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of suitable size and section with 2.0 mm (+/-0.2 mm) wall thickness, the section will have 2nos. built in beads, horizontal & vertical section shall be fixed to each other by self tapping screws and 2 nos. of solid plastic or M.S. tubular galvanised brackets of length 200mmx80mm and other100mmx100mm both 1.20 mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 105 mm x37mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle as lock rail reinforced by solid polymer bar of 200 mm long at both ends abd screws from both sides. The section frame will then be fitted in by PVC panels of size 100 mmx20 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia and screws from both sides 6mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliencies. Carriage of all materials taxes and all other incidental charges complete.The rate is exclusive of cost of hinges, hasp bolt, tower bolt,door ring etc. In ground floor. 40.5 Each 2866.8 Rupees Two Thousand Eight Hundred SixtySix Paise Eighty Only

Page 1 Item No 2.a Earth work in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75m.as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation exceeding 1500 mm 87.44 %cum 11927 Rupees Eleven Thousand Nine Hundred TwentySeven Only

Page 1 Item No 3.a Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150mm including watering and ramming etc. layer by layer complete. %cum 7754 Rupees Seven Thousand Seven Hundred FiftyFour Only

Page14 Item No 1 Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. 58.29 sqm 530.4 Rupees Five Hundred Thirty Paise Fourty Only

Page 34 Item No 22 II (a) Cement concrete with 30mm down graded shingles excluding shuttering. 5.83 cum 5971.2

Page 25 Item No 6.(ii) Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture] M 25 Grade (ii ) N.B. Variety (Stone Metal) 28.71 cum 8187.6 Rupees Eight Thousand One Hundred EightySeven Paise Sixty Only

Page43-44 Item No 40 (a) (i) (I) Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods initial straightening and removal of loose rust (if necessary), cutting to requisite length hooking and bending to correct shape placing in proper position and binding with16G black annealed wire at every intersection as per drawing and direction.(a) For works in foundation and upto roof of ground floor/upto 4 m i) Tor Steel/ Mild Steel/ SAIL/TATA/RINL 0.000 MT 79822.8 Rupees SeventyNine Thousand Eight Hundred TwentyTwo Paise Eighty Only

Page 43 Item No 36 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs,beams,columns,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground ground floor) (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work 151.41 sqm 374 Rupees Three Hundred SeventyFour Only

Page 189 Item No 1 (ii) (c) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (c) 10 mm thick plaster 92.01 sqm 166.8 Rupees One Hundred SixtySix Paise Eighty Only

Page 192 Item no 1 Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. 92.01 sqm Rupees Fourty Paise Eighty Only

TOTAL COST FOR SANITARY AND PLUMBING WORKS

WEST BENGAL STATE RURAL DEVELOPMENT AGENCY, KALIMPONG DIVISION

PRICED SCHEDULE

District KALIMPONG

Name of Work PROPOSED GROUND FLOOR PLUS 4 STORIED SCHOOL BUILDING AT LAVA HIGH SCHOOL , KALIMPONG.

Sl No. Brief Description of Item Quantity Unit Rate (Rs) Amount (Rs)

4. ELECTRICAL WORKS

4.01 Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish. 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC

i) Average run 8 mtr 265 Pts

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish. 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC

a i) On Board 35 Pts Rupees Two Hundred EightySix Paise ThirtyFive Only

b iii) Average Run 3 Mtrr 117 Pts Rupees Nine Hundred Six Paise Twenty Only

4.03 Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required

a 2 x 36/0.3 (2.5 sqmm) 1800 RM Rupees FiftyEight Paise SixtyFive Only

b 2 x 56/0.3 (4 sqmm) [Power & 20A Board] 800 RM Rupees EightyTwo Paise Eighty Only

c 2 x 84/0.3 (6 sqmm) [Main Panel to Floor wise SPN DB] 450 RM Rupees One Hundred TwentyOne Paise Ninety Only

4.04 Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works

i) 19 mm dia 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire 1100 RM Rupees One Hundred Two Paise ThirtyFive Only

4.05 Supplying and fixing sheet metal inspection box (16SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment,painting and mending good damages to building works.

a i) 175mm * 100mm * 65mm. 45 Each Rupees One Hundred Eighty Paise FiftyFive Only

b Supplying & Fixing one way CI Round box with cover concealed in ceiling/wall. 240 Each Rupees Two Hundred TwentyThree Paise Ten Only

Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed dy cover, properly welded, incl. S & F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire. Supplying & Covering the box with polythene sheet placed in order to prevent concrete from entering the box. 39 Each Rupees Two Hundred Four Paise Seventy Only

4.07 Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by (ii) 2x1.5 sqmm flexible copper wire 39 Each Rupees SeventyFive Paise Ninety Only

4.08 Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:a) 23 cm (9") 11 Each Rupees Two Hundred EightyFour Paise Five Only

4.09 Supply & Fixing 240 V, Modular socket (2 Module) type Fan Regulator (Step Type) (Brand approved by EIC) on existing Modular GI switch borad with top cover plate incl. making necy. connections etc. 39 Each

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 52 Each Rupees Four Hundred ThirtyThree Paise FiftyFive Only

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 65 Each Rupees Five Hundred TwentyFour Paise Fourty Only

4.12 Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works.

a 4 Module 35 Set Rupees Three Hundred Paise Fifteen Only

b 6 Module 30 Set Rupees Three Hundred EightyOne Paise Eighty Only

c 8 Module 20 Set Rupees Four Hundred SixtySix Paise Ninety Only

d 12 Module 20 Set Rupees Six Hundred One Paise FourtyFive Only

4.13 Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(Legrand / Havells / Siemens/L&T).

8 way Enclosure (607711) 5 Each Rupees Four Thousand Eight Hundred TwentyThree Paise Ten Only

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 16kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection (Legrand/ Havells/Siemens).

100 A 1 Each Rupees Eight Thousand Two Hundred Fourteen Paise FourtyFive Only

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (Legrand / Havells / Siemens/L&T) .

a Single pole 6-32A MCB [NDB 1,2, EDB 1, EDB 2] 90 each Rupees One Hundred NinetyThree Paise Twenty Only

b Double Pole 40A MCB Isolator [EDB 2 I/C] 10 each Rupees Two Thousand One Hundred Four Paise Fifty Only

4.16 Supplying and fixing Sheet steel Main Switches on angle iron frame on wall Make - Siemens/Legrand/L&T/Havells

100/125A DP 1 Each

4.17 Supplying and fixing Changeover switch with Sheet Steel enclosure on flat iron frame on wall with nuts bolts etc. Make - L&T / Havells / HPL, 240V, 63A DP

63A DP 1 Each Rupees Ten Thousand Seven Hundred TwentyOne Paise FourtyFive Only

4.18 Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991)

415 V, 100/125 A, 4 Bar Aluminium Bar 1 Mtr Rupees Two Thousand Eight Hundred FiftyFour Paise Thirty Only

Main LT Panel: Supply, delivery, installation, testing & commissioning of indoor Cubical type LT Distribution panel board of required size, wall/stand mounted compartmentalized with maple arrangement having rigid & self supporting structure with cable alley fabricated from 2mm thick CRCA sheet steel and 35x5 mm MS angle frame for panel mounting support and making necessary groutong arrangements with neet cementing finish as per direction of EIC. [ Dim - 1050mmx850mmx250mm]. The panel board consisting of the following items: 240V,MCCB 80A electrolyte grade tinned copper BBC with vertical section of 25x6mmsizefor neutral & Phases. Bus-bar shall be fixed with FRP insulator chair & seperator & the entire bars are insulated with PVC heat sinkable sleeve of suitable size & colour as per direction of EIC (equal bar for each i.e 4 bars) & interconnections for:- 80A SFU and all inter connecting links should be made with suitable size copper strip/copper wire. A) Incomming Arrangement: 240V, 50Hz, 63A DP SFU (panel mounting cubical type) conforming to IS 13947 in open execution three pole & neutral, Make- Legrand/Havells/ABB - 4 Nos. B) Bus setion: 240V, 100A electrolyte grade tinned copper bus bar, with vertical section of size 25x6mm for phase RYB, neutral bars of each. A bus bar shall be fixed with FRP chair & the entire bars are insulated with PVC heat sinkable sleeve of suitable size & colour as per direction of EIC. C) Outgoing Arrangement: a) 240V,63A DP SFU (Switch disconnector fuse) panel mounting cubical type conform to IS:13947, in open execution three pole & neutral with 3 nos. 125A DIN type HRC fuse link Make- Legrand/Havells/ABB - 3 No. b) 415V,125A TPN On load changeover switch, front operated changeover switch in open execution type, Make- Legrand/Havells/ABB - 5 No. G) Constructional Details: All incomming & outgoing panel mounted cubical switch disconnector fuse shall be housed in respective compartment with hinged & gasketted door at font, All doors shall havepanel lock arrangement. The panel shall be properly gasketted to prevent ingress of dust& moisture & remain. Busbar will be properly arrange & all switches shall be fixed by MS nuts & bolts on angel iron/flat iron frame base as per direction of EIC. 1 Set Rupees SixtySix Thousand Seven Hundred Only

4.2 Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc. 39 Each Rupees Two Hundred SeventyOne Paise Fourty Only

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991) 39 Each Rupees Two Hundred SeventyEight Paise Thirty Only

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessaryconnection as required by 2x1.5 sqmm flexible copper wire. 39 Each Rupees SeventyFive Paise Ninety Only

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:

30 cm (12") 110mm 11 Each Rupees Three Hundred SeventyEight Paise ThirtyFive Only

4.24 Supply & delivery of Sweep:- 48" (1200mm) AC ceiling fan Decorative, 50-70 Watts, Speed:->=350 RPM, Air delivery:->=220 CMM, make: (Havells, Crompton,/ equivalent [Approved by EIC] 39 Each 3772.41 Rupees Three Thousand Seven Hundred SeventyTwo Paise FourtyOne Only

4.25 Supply & delivery of heavy duty Exhaust Fan of Sweep:-9" (200mm), 240 volt, 50 Hz, AC , 50-60 Watts, Speed >900 RPM, Air delivery >=1145 CMM suitable for . [Make - Orient(Model:Power Flow)/EPC/Havells/Crompton Greaves] [Approved by EIC] 11 Each 2103.75 Rupees Two Thousand One Hundred Three Paise SeventyFive Only

4.26 Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. 280 RM Rupees SixtyFive Paise FiftyFive Only

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed 120 RM Rupees One Hundred EightySix Paise Thirty Only

4.28 Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :

a For 4 core upto 35 sqmm 4 Set Rupees One Hundred EightySix Paise Thirty Only

b For 4 core upto 10 sqmm 20 Set Rupees One Hundred FiftyOne Paise Eighty Only

4.29 Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required

65 mm dia ISI 86 Mtr Rupees Four Hundred SeventyEight Paise Fourty Only

4.3 Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials

a 4 core 35 sqmm cable 4 Set Rupees One Hundred EightyOne Paise Seventy Only

b 4 core 10 sqmm cable 20 Set Rupees SeventySeven Paise Five Only

Supplying of 1.1 KV. Grade LT power cable, XLPE insulated, cores laid up, PVC inner sheathed aluminium armoured conductor of the following specificaion:- (make: Polycab/Gloster/Havells) 16 sqmm 2 core (A2XWY/A2XFY) [METER PANEL TO D.G. AMF PANEL (TO & FRO) & INTER CONNECTION] 120 RM 656.94 Rupees Six Hundred FiftySix Paise NinetyFour Only

Supplying of 1.1 KV. Grade LT power cable, XLPE insulated, cores laid up, PVC inner sheathed aluminium armoured conductor of the following specificaion:- (make: Polycab/Gloster/Havells) 6 sqmm 2 core (A2XWY/A2XFY) [Floor DB] 280 RM Rupees Two Hundred EightyTwo Paise Nine Only

Earthing with Copper plate (610x610x3mm size) having weight of 9.84 Kg and 1 No. 25x5mm Copper strip (3.20 mt long) & 1 no. 6 sqmm PVC insulated stranded Copper wire (4 Mt long) incl. S & F 15 mm dia GI pipe (ISI-Medium) protection (4 mt. long) to be fillied with bitumen, partly under the ground level & partly above ground level to an average depth of 3.65 Mts. below the ground level and restoring the surface duly rammed incl. providing 3.0 mt long, 25 mm dia GI pipe (ISI-Medium) for periodic treatment, incl. providing masonery enclosure on the top of the earth electrode of overall size 86.36x86.36x46cm deep (below Ground level) complete with cemented brick work (1:6) of 25 cm width, duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56x35.56cm with locking arrangement, GI reducer and treatment of soil by using salt & charcoal or coke for plate electrode. [D.G. Body:2, D.G. Neutral: 2, Panel Earthing: 1, Buiiding Earthing: 2] 7 Set

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe 7 Item Rupees One Thousand FiftyTwo Paise TwentyFive Only

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. 60 Mtr Rupees One Hundred SeventyNine Paise Fourty Only

Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. 60 Mtr Rupees One Hundred Five Paise Eighty Only

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. Solid GI wire

No. 6 SWG 120 Mtr Rupees Fourteen Paise NinetyFive Only

Supply & delivery of single 4ft LED tube light fitting incl. 4ft LED tube, 1200 mm, Efficacy>= 100 lm/W, THD<10%, complete with all accessories. (Mas LEDtube 1200mm) [Philips: TMC 501 P 1xT-LED 20W P3241] or equivalent of Havells, Crompton etc. [Approved by EIC] 130 Each 473.34 Rupees Four Hundred SeventyThree Paise ThirtyFour Only

Supply & Delivery at site Slim surface mounted LED panel with premium diffuser to ensure glare free & even light distribution. Efficacy>=90 lm/W, [Make-Crompton] or equivalent of Havells, Philips etc. [Approved by EIC] 18W 85 Each 1299.31

Supply & Delivery at site 9 watt LED Bulb, Efficacy>=90 lm/W, Base Cap:-B22 [Make-Crompton] or equivalent of Havells, Philips etc. [Approved by EIC] 40 Each 143.44 Rupees One Hundred FourtyThree Paise FourtyFour Only

Supplying & Fixing Out door type CFL luminaire (Havells makeLHRC4185099) with deep drawn aluminium housing anodised inside & clear acrylic cover and accessories incl. for 85 watts CFL lamp incl. S&F 32mm dia GI pipe bracket, clamp, nut & bolts etc. 20 Each Rupees Two Thousand One Hundred TwentySix Paise ThirtyFive Only

Supply of CPCB IV approved ESCORTS 15 KVA 1 Ph 230V/50Hz Diesel Generator Sets powered by ESCORTS Diesel Engine of model G15-II with Suitable Radiator directly coupled to STAMFORD Alternator including Fuel Tank, Residential Type Silencer, Anti-Vibration Pads, Batteries and Battery Leads with Sound proof Canopy with AMF Control panel along with below EM Parts of one quantity each: 1) D10245910.9 - STARTER MOTOR ASSEMBLY 2) D10206600.9 - SENSOR UNIT OIL PRESSURE GAUGE 3) D10411390.9 - INDICATOR ASSEMBLY WATER LEVEL (G15) 4) XXXXXXXXXX – RELAY START/STOP 1 Set 461250 Rupees Four Lakh SixtyOne Thousand Two Hundred Fifty Only

Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling by screws etc. 130 Each Rupees NinetyEight Paise Ninety Only

Fixing only bulk head ceiling fitting on wall /ceiling by screws etc. 85 Each Rupees SixtyFour Paise Fourty Only

Fixing only lamp 40 Each Rupees Five Paise SeventyFive Only

3 Ph Service connection charges 1 Each 65000 Rupees SixtyFive Thousand Only

4.47 Civil works for DG Set foundation, Protective shed and fencing work of DG set 1 Each 149456 Rupees One Lakh FourtyNine Thousand Four Hundred FiftySix Only

FIRE FIGHTING AND HYDRANT SYSTEM

FIRE WATER PUMPING SYSTEM Supply, Erection, testing & commissioning of Electrical Motor driven main pump, centrifugal horizontal type, withg land packing capable of deliver 2850LPM at 70MWC. The pump shall be coupled with TEFC motor of suitable KW with speed of 2900RPM with all accessories and complete set shall mounted on common base frame. The quote drate shal linclude fixing of coupling, coupling guard RCC foudation and foudation bolts etc. 1 Nos 258.3 Rupees Two Hundred FiftyEight Paise Thirty Only

Supply, Erection, testing & commissioning of diesel engine driven common standby pump, centrifugal horizontal type with gland packing and capable to deliver 2850LPM at 70MWC. The pump shall coupled to suitable HP of Diesel Engine radiator water cooled type with speed of 1800RPM with all accessories including diesel engine control panel and complete set shall be mounted on common base frame. Batteries & battery leads with stand, fueltank (for 4hrs operation) with stand and gaugeg lass, fuel piping with valve salso to be fixed. the quotedrate shall include radiator water cooling piping (ifrequired), coupling guard and other standard accessories, RCC foundation (as recommended by manufacturer) and foundation bolts, etc, complete. 1 Nos 377200

Supply, Erection, testing & commissioning of electric motor driven Jockey Pump, horizontal, centrifugal type capable to deliver 180LPM at 70MWC. The pump shall coupled to TEFC motor of suitable KW with speed of 2900RPM with all accessories mounted on common base frame. 1 Nos 69700 Rupees SixtyNine Thousand Seven Hundred Only

Supply,Erection,testing&commissioningofcompartmentalisedcommoncontrolpanelforElectricalMotordrivenpumpsaspertechnicalspecificationattachedwiththistenderdocument.Allcomponentsshallbehousedinacommoncubicalsmadeof16swg.M.S.sheetwithrequiredstiffners(ifrequired).Thepanelshallbepowderquotedofapprovedcolourbothinsideandoutside.Thepaneshallhavebothbottomandtopcableentryprovisionsandpanelshallbemountedonpedestalof300mmheight.Thepanelshouldhavesufficient(min.6nosperpumpset)NO/NCcontactsforextendingthestatusoffirepumpstothefirealarmpanel. 1 Nos 20500 Rupees Twenty Thousand Five Hundred Only

Supply, laying, testing & commissioning of FRLS, PVC oter sheath, steel armoured, aluminium/copper conductor, 1100Volt Grade power cables with gland etc. The cable shall bel aidintray/humepipe/intrenches/onwalls/floor set cas required. Cables laid out doors shall include the price of earth escavation providing brick and sand protection, refilling and compacting the earth.3.5C x 70 sq.mm YFY for main pump 120 Mtr. 377.2 Rupees Three Hundred SeventySeven Paise Twenty Only

HYDRANT SYSTEM Supply, Erection, testing of MS black steel pipe Heavv Grade conforming to IS:1239 Part 1/3589 including all fittings vlz. Elbows, tees, flanges, etc. reduces, clamps, 'nsluded with joints complete with anti corrosive treatment to burried pipes by wrapping with two coats of 4 mm thick PYPKOTE membrane applied over a coat of primer for external yard hydrant network.150 mm NB 0

a) 150 mm NB 15 Mtr. 1968 Rupees One Thousand Nine Hundred SixtyEight Only

a) 80 mm NB 15 Mtr. 984 Rupees Nine Hundred EightyFour Only

a) 25 mm NB 10 Mtr. 369 Rupees Three Hundred SixtyNine Only

Supply and installtion of swinging type CIN onreturn Valve as per IS:5312 with flap and Sshinges complete including matching flanges, nuts & bolts confirming to IS 5312 Size 150 mm NB 3 Nos 13366 Rupees Thirteen Thousand Three Hundred SixtySix Only

Supply, Installation, testing & commissioning of CI Gate Valve as per IS:14846 (PN16) with matching flanges complete with nuts & bolts. Size 150 mm NB 5 Nos 13366 Rupees Thirteen Thousand Three Hundred SixtySix Only

Supply, Installation, Testing & Commissioning of Addressable Loop Powered Hooter (sound output of minimum 90 db) cum strobe (strength of light 10 cd)complete with inbuilt isolator & IP65 base and (VDS / UL / FM / ULC approved) approved. (Approved Make: Esser / Cerberus Pro / Bosch/ Johnson Controls / Notifer / Edward / Secutron / Securiton / Apollo / Morley / System Sensor ) 10 Nos 1377.6 Rupees One Thousand Three Hundred SeventySeven Paise Sixty Only

Supply, Installation, Testing & Commissioning of Addressable transponder/ Monitor Modules ( VDS / UL / FM / ULC approved ) for monitoring flow switches/Fire exit doors / AHU / Lift etc complete as required. (Approved Make: Esser / Cerberus Pro / Bosch / Johnson Controls / Notifer / Edward/ Secutron / Securiton / Apollo / Morley / System Sensor ) 10 Nos 1592.44 Rupees One Thousand Five Hundred NinetyTwo Paise FourtyFour Only

Supply, Installation, Testing & Commissioning of Addressable Relay Modules (VDS / UL & FM approved) for switching / integration of Lift / AHU etc complete as required.(Approved Make: Esser / Cerberus Pro / Bosch / Johnson Controls / Notifer / Edward / Secutron / Securiton / Apollo / Morley / System Sensor ) Nos 1722 Rupees One Thousand Seven Hundred TwentyTwo Only

Supplying, installation, testing and commissioning of LED type Response Indicator ( VDS / UL / FM / ULC approved) having 2 Nos. red coloured LED lamps including connections etc. (Approved Make: Esser / Cerberus Pro / Bosch / Johnson Controls / Notifer / Edward / Secutron / Securiton / Apollo / Morley / System Sensor) 20 Nos 232.06 Rupees Two Hundred ThirtyTwo Paise Six Only

Supply, Installation, Testing & Commissioning of Power supply 230 V AC to 24V DC with all other accessories. (Make: Reputed) 20 Nos Rupees Five Hundred FourtyOne Paise Twenty Only

Supply & Laying of 2 Core 1.5 sq.mm FRLS shielded copper Cable (For Loop) (Make. Finolex / RR Kable / Polycab) with 20 mm NB PVC rigid conduit pipe (Make: Precision / AKG/ATUL / VIP / Universal / BEC / Polycab) on the surface of the wall. 1200 Mtr. 68.06 Rupees SixtyEight Paise Six Only

Providing, fixing, testing and commissioning of ABC type 6 Kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Controllable discharge mechanism Class A Rating 3A & Class B rating 21B as per IS 15683 ISI MARK (ABC Dry Chemical Powder - MAP 50%). 15 Nos 1640 Rupees One Thousand Six Hundred Fourty Only

Providing and fixing, testing and commissioning of CO2 type Fire Extinguisher of capacity 4.5 kg filled with Co2 Gas as per IS 15222 with controll discharge mechanis, fitted with Hose & Horn applicable on Class B fire rating 21B confirms to IS 15683 bearing ISI mark. Co2 cylinder 15 Nos 4920 Rupees Four Thousand Nine Hundred Twenty Only

FDA SYSTEM Supply, erection, testing & commissioning of 10 ZONE CONVENTIONAL TYPE FIRE ALARM PANEL complete with all alarms ,hooter, fire/fault indicators, audio/visualsignals, battery, battery charger & M.S.Battery box/UPSwithin-built PA Console, selector switch and microphone. 1 Nos 28700 Rupees TwentyEight Thousand Seven Hundred Only

Supply, erection, testing & commissioning of conventional Mannual Call point 5 Nos 1066 Rupees One Thousand SixtySix Only

Supply, erection, testing & commissioning of Hooter cum Speaker( 6 Watt ) 5 Nos 10660 Rupees Ten Thousand Six Hundred Sixty Only

Supply, erection, testing & commissioning of Optical type Smoke Detector 20 Nos 1025 Rupees One Thousand TwentyFive Only

Supply, erection, testing & commissioning of Heat Detector 15 Nos 984 Rupees Nine Hundred EightyFour Only

Providing & fixing FRLS ARMOURED CABLING complete with lugs, laying and termination of both ends.2C x 1.5 mm2 Armoured ( loop cable) 300 Mtr. 102.5 Rupees One Hundred Two Paise Fifty Only

Providing & fixing FRLS ARMOURED CABLING complete with lugs, laying and termination of both ends.2C x 1.5 mm2 Armoured ( power cable) 60 Nos 102.5 Rupees One Hundred Two Paise Fifty Only

SIGNAGES Supply and installation in positionthe"FIRE EXIT"Sign with luminicent colour having size 300 x 100 mm 5 Nos 287 Rupees Two Hundred EightySeven Only

Supplying, fabrication and commissioning of L.T. Panel board with 16SWG MS sheet enclosure on MS Flat/ angle complete with fixing of TPN Switch Disconnector Fuse Unit, FP Changeover & 4 bar Busbar and making connection to equipments.(4x3 ft=12sqft @ 3500.00/sqft) 1 Set 34440 Rupees ThirtyFour Thousand Four Hundred Fourty Only

SUB STATION WORK

SUB STATION WORK 878884

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: Executive Engineer, West Bengal State Rural Development Agency, Kalimpong Division, Gorkhaland Territorial Administration

Name of Work : Construction of Proposed Ground Plus 4 Storied School Building at Lava High School in Lava Block, District Kalimpong under RIDF XXXI, Gorkhaland Territorial Administration

Contract No : 39 of 2025-26_2

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

Cost for Ground Floor Works 1 Nos. Excess(+) Full Conversion INR

Cost for First Floor Works 2 Nos. Excess(+) Full Conversion INR

Cost for Second Floor works 3 Nos. Excess(+) Full Conversion INR

Cost for Third Floor Works 4 Nos. Excess(+) Full Conversion INR

Cost for Fourth Floor Works 5 Nos. Excess(+) Full Conversion INR

Cost for Top Floor works 6 Nos. Excess(+) Full Conversion INR

Cost for Retaining Wall 7 Nos. Excess(+) Full Conversion INR

Cost for Land Development Works 8 Nos. Excess(+) Full Conversion INR

Cost for Sanitary & Plumbing 9 Nos. Excess(+) Full Conversion INR

Electrical Works 10 Nos. Excess(+) Full Conversion INR

Add @ 18% GST on Cost of Construction 11 Nos. Excess(+) Full Conversion INR

Add @ 1% Labour Welfare CESS on Cost of Construction including GST 12 Nos. Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information