Air Conditioning Work for UPS Room in EDP Building at HAL Lucknow.

Installation

Supply, Installation, testing and commissioning of Package AC. Supply, installation, testing & commissioning of 5.5 TR Air-cooled Package units including refrigerant (eco-friendly) Scroll compressor inbuilt in package AC

Supply, Installation, Testing and Commissioning including vaccumization and Nitrogen testing of hard drawn copper refrigerant piping suitable for package AC system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, all accessories as per specifications etc. as required.

Drain Piping

Supply and laying of control cum transmission/communication wiring between indoor & Outdoor units

Supply & Laying of PVC insulated, PVC sheathed Armored, 1.1 KV grade, Copper conductor power cable, conforming to IS1554: (Part-I). Cable to be laid from point of incoming supply to indoor/ outdoor unit and as per the direction of Engineer-In-Charge. Clamps for holding cable to be provided at each meter.

Supply & Installation flexible double Canvass Connections (treated for fire) between indoor units and supply air duct.

EARTHING

Supply, Installation of Indoor Stand. Indoor unit stand frame structurally M.S C Channel of suitable size indoor units make of structural steel and painted with one coat of primer and two coats of synthetic enamel paint

Dismantling of old 10 TR Package Units (2 Nos), Split Unit (2 Nos) including IDU & ODU, existing ducts (approx. 80 sqmm), electrical cable, Package Unit connection pipe etc and shifting of scrap material debris to scrap yard. Ducts shall be cut/ flattened/ compressed before disposing to scrap yard. After dismantling of ducts, closure of wall opening using brick & cement and a layer of cement plaster followed by putty and matching paint.

Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular ducting complete with neoprene rubber gasket, elbows, splitter, damper, vanes, hangers, Supports etc. As per approved drawings and specifications of following sheet thickness complete as required.

Thickness 0.63mm sheet (24G)

Thickness 0.80mm sheet (22G)

Supply & fixing of 13mm thickness duly laminated aluminum foil of mat finish closed cell nitrile rubber class 'O' insulation after applying suitable adhesive for nitrile rubber.

Supplying & fixing of powder coated extruded aluminium Diffusers with MS volume control dampers complete as required

Supply and installation of 4-pole MCCB of following specifications: Current rating: 63A Breaking capacity: 10 kA@415V Conforming to IS/IEC 60947-2, IEC 60947 & EN 60947-2

Supply, installation, testing and commissioning of Automatic Cycle switching ON and OFF system for two nos 5.5 TR Air Conditioners with manual override facility for carrying out maintenance/Repair works. The system should have programmable four Digits Duct display cyclic Time controller with Quartz Crystal Accuracy. One Display for Actual time and second display for indicating set time. One set of Relay contacts for each AC for switching on and off Air Conditioners. Non volatile EEPROM should be available in the Time controller for saving the settings. Configuration should be Password Protector.

Supply, installation, testing and commissioning of 5 star rated inverter type High Wall Split Type Air Conditioner (single phase) fitted with hermetically sealed rotary compressor on eco-friendly refrigerant gas (R32) with cordless remote, indoor & outdoor units complete with Copper Coil, floor/ wall mounted MS Stand for outdoor (as per site requirement), capable of performimg ; Cooling, Dehumidifying, Air Circulating & Filtering. Rated Cooling Capacity ≥ 5100 KW ISEER Rating ≥ 5.0 Warranty on indoor and outdoor PCBs: 05 Years Warranty on Compressor: 10 Years

Supply and installation of Extra both Refrigerant Pipe with insulation and connecting cable for Split AC.

Supply & Installation of PVC/ uPVC drain pipe with elbow & union (OD 25 mm and thickness 2 mm min). Pipes to be fixed with clamps.

HAL-ADL/CWA-24AC/10

Description

Submission of EMD (Scan Copy & Original both, Refer Section-3). Particulars of EMD i) Wire Transfer/ Demand Draft /Bankers Cheque No/Transaction No ii) Date iii) Name of Bank iv) Address of Bank v) Validity of DD/Bankers Cheque

Bid Securing Declaration Form (Refer Section-2) (Please upload in pdf)

Undertaking (Refer Section-2) (Please upload in pdf)

Submission of Documents as detailed below:

Authorization Letter/Power of Attorney (IF APPLICABLE) (Please upload copy in pdf)

Proof of Valid Legal Entity. (Ref: Section -3) (Please upload copy in pdf)

PAN Copy (Ref: Section -3) (Please indicate PAN Number & upload PAN copy in pdf )

GSTIN Registraion Copy. (Ref: Section -3) (Please indicate Goods and Services Tax Registration no & upload copy in pdf)

Copy of EPFO Registration (Ref: Section -3) (Please indicate registration no. & upload copy in pdf)

Copy of ESIC Registartion (Ref: Section -3) (Please indicate registration no. & upload copy in pdf)

Proof of Annual Turnover of Last 3 Years-Profit Loss Account & Balance Sheet. Profit & Loss statement duly certified by chartered accountant with UDIN. (Ref: Section -3). (Please upload copy in pdf)

Latest & Valid Solvency Certificate (within the period of 12 Months from the final date of submission of tender) (Ref: Section -3) (Please upload copy in pdf).

Self declaration containing details of communication (Ref: Section -3). (Please indicate e-mail ID, Name & Designation of Contact Person, Mobile No/Landline No)

Proof of experience (Ref: Section -3) (Please upload in 'pdf' format)

Proof of Work in-hand certified by Chartered Accountant(Ref: Section -3) (Please upload in 'pdf' format)

Copy of Electrical License (Ref: Section -3) (Please upload in 'pdf' format)

Copy of Cancelled Cheque and duly signed and stamped Model Mandate Form (Ref: Section -6) (Please upload in 'pdf' format)

Compliance to read and understand the Requirement & Scope of Work of the contract. (Refer Section-4 and Section-5)

Acceptance for clause 1.9, 1.25, and 1.26 of section-5 of tender document in respect of supervision of work, disposal of scrap, and Certificate of Conformance respectively.

Acceptance to complete the work within Four months from date of work order, if awarded.

Product catalogue (s)/ specification document/ technical data sheet of air conditioners. (Please upload copy in pdf)