REPAIR AND MAINTENANCE OF MISCELLANEOUS FURNITURE ARTICLES HELD ON CHARGE OF BSO (SOUTH) MEERUT UNDER GE (SOUHT) MEERUT

Amount

CHAIR CB STEEL WITH AND WITHOUT ARMS (FD-75(M)) Welding of broken parts of chair steel with 25mm round MS conduite pipe of 1.6 guage as per existing shape & size and applying powder coating after pretreatment of steel surfaces by degreasing, derusting, water rinse, phosphating and passivating as per the colour/ shade approved by GE.

M&L for removal of unsv seat & back of chair, S&F of seat and back of chair with new seat of 12mm thick BWR plywood (ISI marked) covered with 75mm thick U foam and best quality of tapestry cloth irrespective of what is shown on drg. The back shall be of 12 mm thick BWR plywood (ISI marked) (Make :- Greenply/Century/Action Tesa/Archid) fixed to frame with screw and covered with 50 mm thick U foam over shape and best quality of tapestry cloth. Seat and back fixed on frame with screw and including all minor repairs with welding to steel frame etc complete all as specified and as directed by Engineer-in-Charge. (Note :- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter and as per sample approved by GE.)

M&L for removal of unsv arm rest of chair and S&F of new arm rest of black integral skin polyurethane reinforced with MS insert and shall be scratch and weather resistant all as directed by Engr-in-Charge / GE.

S&F in replacement hard rubber shoes at the bottom of Chair CB steel all as shown on drg.

RECANNING TO DIFFERENT TYPES OF CHAIR and Stool (Drg No FD-279, 229, 281) Recanning of wooden chair of different sizes (Eg :- Chair Dining,Chair writing,Chair Easy,Stool Dressing CB etc.) with 2mm wide cane having 3mm wide plastic cane(Make: Shah/Arihant) border in Godrej pattern complete all as per drawing, as specified and as directed

HAT STAND WITH MIRROR (Drg No FD-361/233) Removing old broken/unserviceable teak plywood from front frame of hat stand and S&F new 04mm thick OSTF BWR plywood both side laminated as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed. (Make :- Greenply/Century/Action Tesa/Archid)

Removing old broken/ unserviceable plywood from back side of hat stand and S&F new 04mm thick BWR plywood both side laminated as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed. (Make :- Greenply/Century/Duro/Archid)

Removing of old/ broken looking mirror from hat stand and supplying and fixing new looking mirror of size 300 x 440 x 5mm of modi-gurard duly fixed in position complete all as shown on drawing (Make:- Modi-guard/Saint-Gobain/Swastik).

Removing old broken/unserviceable beading from hat stand and S&F new 06x35 mm thick teak wood beading all as per drawing including french polishing to match the other parts complete all as specified and directed.

Removing old broken/unserviceable wooden battens from hat stand and S&F new teak wood wooden battens as per shape and size shown in drawing and as directed.

Removing of old unserviceable aluminium/ brass pegs from hat stand and S&F new brass pegs of size 120x75mm (overall) to hat stand all as per drg and as directed.

TABLE DRESSING LADIES WITH MIRROR (Drg No FD- FD/MAP-II/07/ FD-251) or similar Removing of old unserviceable looking mirror from table dressing ladies and S&F looking mirror of size 1200 x 450 x 5mm thick of modi-gurard duly fixed in and including frame of teak wood and polishing complete all as per drawing, as specified and as directed

Removing old broken/unserviceable knob/ handle from table dressing ladies and S&F new 40 mm size CP brass knob as per shape and size shown in drawing complete all as per drawing, as specified and as directed

Removing old broken/unserviceable sliding glass from table dressing ladies and S&F 05mm thick sheet glass with plastic handle as per sample, shape and size shown in drawing complete all as per drawing, as specified and as directed

Removing old broken/unserviceable legs from table dressing ladies and S&F legs of Ist class hard wood teak as per shape and size shown in drawing including french polishing to match the other parts complete all as per drawing, as specified and as directed

Removing old broken/unserviceable sunmica from the top of table dressing ladies and S&F 1.5 mm thick sunmica of best quality fixed with fevicoal as per shape and size shown in drawing complete all as per drawing, as specified and as directed

Removing old broken/unserviceable sunmica from the drawer of table dressing ladies and S&F 1.5 mm thick sunmica of best quality fixed with fevicoal as per shape and size shown in drawing complete all as per drawing, as specified and as directed

TABLE CENTRE Two Tier (Drg No FD No -274) Removing of old unserviceable top from table centre and S&F new top made out of 17/18 mm thick BWR plywood duly post formed, colour / shade as approved by GE. 2 mm thick PVC edge-binding of Make-Rehau/Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and as directed. (Make :- Greenply/Century/Action Tesa/Archid)

Replacement of old unserviceable leg from existing table centre and S&F the same size leg made out of Ist class hard wood teak to table centre duly french polished complete all as per drawing, as specified and as directed

All as per srl item No 19 here-in-before but long rail complete all as per drawing, as specified and as directed

All as per srl item No19 here-in-before but short rail complete all as per drawing, as specified and as directed

All as per srl item No 19 here-in-before but stiffener of table centre complete all as per drawing, as specified and as directed

All as per srl item No 19 here-in-before but Hard Rubber ring of table centre complete all as per drawing, as specified and as directed

All as per srl item No 19 here-in-before but Bottom Rail of table centre complete all as per drawing, as specified and as directed

Chair Dining with Long Back (MAP) (Drg No FD-357) Removal of old unserviceable back leg of chair in any position, S&F back leg made of 1st class hard wood (teak wood) complete all as per drawing, as specified and as directed

All as per srl item No 25 here-in-before but front leg complete all as per drawing, as specified and as directed

All as per srl item No 25 here-in-before but side rail complete all as per drawing, as specified and as directed

All as per srl item No 25 here-in-before but front/ back rail complete all as per drawing, as specified and as directed

All as per srl item No 25 here-in-before but stiffner complete all as per drawing, as specified and as directed

All as per srl item No 25here-in-before but back strip complete all as per drawing, as specified and as directed

Removal of old unserviceable seat of chair, S&F foam cushion 4" thick (ISI Marked IS-1741) 40 density for seat and back and covered with superior quality rexine / cloth, fixed with removable 12mm BWR grade commercial ply wood complete all as per drawing, as specified and as directed (Make :- Greenply/Century/Action Tesa/Archid)

CHAIR COMPUTER :- (Drg No FD - E/6/MAP/01) M&L for Replacement of old unserviceable seat and back of chair with new seat of 12mm thick plywood (Make :- Greenply/Century/Action Tesa/Archid) commercial quality (ISI marked) covered with 75mm thick U foam and tapestry cloth. The back shall be 6mm thick plywood commercial quality (ISI marked) fixed on frame with screws and covered with 40mm thick U foam over shape and tapestry cloth. Fixing shall be all as per drawing and including all minor repairs and welding etc. complete all as specified and as directed by Engineer-in-Charge. (Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE). complete all as per drawing, as specified and as directed.

M&L for Removing of old/unserviceable tapestry cloth from seat and back of existing Chair Computer and S&F new tapestry cloth to seat and back of Chair Computer (Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE). complete all as per drawing, as specified and as directed.

M&L for Replacement of unserviceable hydraulic system of Chair Executive for the adjustment of height complete all as per drawing, as specified and as directed.

M&L for Replacement of old, unserviceable/ broken wheel base of Chair Executive complete all as per drawing, as specified and as directed.

Removing old/unserviceable twin castor wheel from chair and S&F new twin wheel castors as per existing shape and size complete all as per drawing, as specified and as directed.

M&L for Replacement of old unserviceable / broken arm rest with new arm rest of black integral skin polyurethane reinforced with MS insert and shall be scratch and weather resistant of Chair briefing static base complete all as per drawing, as specified and as directed.

CHAIR WRITING :- (Drg No FD - E6/MAP/12) M&L for Replacement of old unserviceable seat and back of chair with new seat of 12mm thick plywood (Make :- Greenply/Century/Action Tesa/Archid) commercial quality (ISI marked) covered with 75mm thick U foam and tapestry cloth. The back shall be 6mm thick plywood commercial quality (ISI marked) fixed to frame with screw and covered with 40mm thick U foam over shape and tapestry cloth. Seat and back fixed on frame with screw and including all minor repairs with welding to steel frame etc (Note :- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter and as per sample approved by GE.) complete all as per drawing, as specified and as directed.

M&L for Removing of old/ unserviceable tapestry cloth from seat and back of existing Chair Writing and S&F new tapestry cloth to seat and back of Chair Writing (Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE). complete all as per drawing, as specified and as directed.

M&L for Welding to broken joints of Chair writing complete all as per drawing, as specified and as directed.

S&F in replacement hard PVC shoes to Chair writing . complete all as per drawing, as specified and as directed.

M&L for Replacement of old unserviceable / broken arm rest with new arm rest of black integral skin polyurethane reinforced with MS insert and shall be scratch and weather resistant of Chair briefing static base complete all as per drawing, as specified and as directed.

TEAPOY VERANDAH :- (Drg No FD - E6/MAP/17) Removing of old unserviceable top from Teapoy Verandah and S&F of new top made out of 17/18 mm thick BWR plywood duly post formed (Make :- Greenply/Century/Action Tesa/Archid), colour / shade as approved by GE. 2 mm thick PVC edge-binding of Make-Rehau/Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and as directed.

M&L for Welding to broken joints of Teapoy verandah complete all as per drawing, as specified and as directed.

S&F in replacement PVC shoes to Teapoy verandah complete complete all as per drawing, as specified and as directed.

Removing of old/unserviceable jali from existing Teapoy Verandah and S&F new Jali including two coat of synthetic enamel paint (black in colour) complete all as per drawing, as specified and as directed.

TABLE BED SIDE (OFFICERS) :- (Drg No FD/DB - ) M&L for Replacement of Upper drawer made out of 17/18 mm thick MDF board(Make: Archid ply/Greenply/Centuryply), and provided with 6mm thick bottom plywood of BWR (Make :- Greenply/Century/Action Tesa/Archid) grade complete all as per drawing, as specified and as directed.

M&L for Replacement of Lower drawer made of 17/18 mm thick MDF board, and provided with 6mm thick bottom ply BWR grade & telescopic channel of best quality complete all as per drawing, as specified and as directed.

M&L for Removing of old unserviceable top from table bed side and new top made out of 17/18 mm MDF board with teak faced with 04mm thick teak wood beading complete all as per drawing, as specified and as directed.

All as per Srl item No 49 here-in-before but side of table bed side complete all as per drawing, as specified and as directed.

Removing of old unserviceable back ply of table bed side and S&F new back ply of same size made out of 06mm thick plywood and as directed by Engineer-in-Charge.

S&F Removing of old/unserviceable handle from the table bed side and supply and fixing new CP steel handle 100mm long as per sample, shape and size all as per drawing and as directed by Engr-in-charge.

LOCKER BED SIDE STEEL :- (Drg FD - 257) M&L for Replacement of old unserviceable hasp and staple with new 100mm long MS chromium plated hasp and staple all as shown drg complete all as per drawing, as specified and as directed.

M&L for Replacement of old unserviceable bow handle with new 100mm long CP steel bow handle complete all as per drawing, as specified and as directed.

M&L for Replacement of unserviceable conduit pipe with new CP steel conduit pipe of suitable size of 20mm dia having wall thickness 1.25mm to locker steel complete all as per drawing, as specified and as directed.

M&L for Replacement of unserviceable socket with new aluminium socket/brackets suitable for MS 20mm dia conduit pipes complete all as per drawing, as specified and as directed.

S&F Removing of old unserviceable foot rest from locker bed side steel and new foot rest made out of 1mm thick MS black sheet (PBI) of existing size, shape and welding at appropriate points and applying one coat of synthetic enamel olive green paint with spray machine over a coat of primer after preparation of surfaces complete all as per drawing, as specified and as directed.

All as per item Sl No 57 above here-in -before but bottom sheet of locker bed side steel complete all as per drawing, as specified and as directed.

Removing of old unserviceable MS hinges of locker bed side steel and S&F new MS hinges 65 mm long with gas welding / reviting complete complete all as per drawing, as specified and as directed.

CHAIR REVOLVING LOW BACK (STEEL) :- (Drg No FD - TP) Replacement of old unserviceable seat and back of chair with new seat of 12mm thick plywood (Make :- Greenply/Century/Action Tesa/Archid) commercial quality (ISI marked) covered with 75mm thick U foam and best quality of tapestry cloth. The back shall be 6mm thick plywood commercial quality (ISI marked) fixed on frame with screwes and covered with 40mm thick U foam over shape and best quality of tapestry cloth. Seat and back fixed on frame with screw and including all minor repairs and welding etc complete all as specified and as directed by Engineer-in-Charge. (Note :- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE.)

Removing of old/unserviceable tapestry cloth from seat and back of existing Chair Revolving and S&F new tapestry cloth to seat and back of Chair Revolving complete all as specified and as directed by Engineer-in-Charge. (Note:- The tapestry cloth of rate shall not be less than Rs. 175/- per meter as per sample approved by GE).

Replacement of unserviceable hydrulic system of Chair revolving for the adjustment of height all as directed by the Engineer-in-Charge.

Replacement of old ,unserviceable/broken wheel base of Chair revolving all as directed by the Engineer-in-Charge.

Removing old/unservicavle twin castor wheel from chair and S & F new twin wheel castors as per shape and size complete all as specified and directed.

Replacement of old unserviceable / broken arm rest with new arm rest of black integral skin polyurethane reinforced with MS insert and shall be scratch and weather resistant of Chair briefing static base all as directed.

TABLE COMPUTER (FD/E6/MAP/03) Removing of old unserviceable top from Table computer and supply and fixing new top made out of 17/18 mm thick MDF board(make: Archid ply/Greenply/Centuryply) of colour / shade complete all as per drawing, as specified and as directed.

Removing of old unserviceable bottom from Table computer and supply and fixing the new bottom of same size made out of 17/18 mm thick MDF board (make: Archid ply/Greenply/Centuryply) with all round PVC edging complete all as per drawing, as specified and as directed.

All as per Srl item No 66 here-in-before but vertical board on side of Table computer complete all as per drawing, as specified and as directed.

All as per Srl item No 66 here-in-before but keyboard tray of Table computer complete all as per drawing, as specified and as directed.

All as per Srl item No 66 here-in-before but drawer of Table computer complete all as per drawing, as specified and as directed.

All as per Srl item No 66 here-in-before but pull out mouse tray of Table computer complete all as per drawing, as specified and as directed.

Removing of old unserviceable telescopic channel of key board and supply and fixing new stainless steel telescopic channel to Table computer complete all as per drawing, as specified and as directed.

All as per Srl item No 72 here-in-before but telescopic channel for drawer of Table computer complete all as per drawing, as specified and as directed.

All as per Srl item No 72 here-in-before but telescopic channel for pull out mouse tray of Table computer complete all as per drawing, as specified and as directed.

S&F new Nylon buffers to Table computer complete all as per drawing, as specified and as directed.

S&F new knobs to Table computer complete all as per drawing, as specified and as directed.

Rack Rifle for 20 rifles and 60 rifles :- (Drg No STD-M5) M&L for necessary repairing of rack rifle for 20 rifles and 60 rifles.

Stool 2' High (FD-DB) M&L for necessary repairing of Stool 2' high

TABLE COMPUTER Wooden (4'x3')(TP) Top : Removing of unserviceable table top, making to size fixing new top of required size 17-18 mm thick BWR plywood duly post formed as approved by GE. 2mm thick PVC edging binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as specified and directed. (Make :- Greenply/Century/Action Tesa/Archid)

Removing of old unserviceable bottom from Table computer and supply and fixing the new bottom of same size made out of 17/18 mm thick MDF board with all round PVC edging complete all as per drawing, as specified and as directed.

All as per Srl item No 80 here-in-before but vertical board on side of Table computer complete all as per drawing, as specified and as directed.

All as per Srl item No 80 here-in-before but keyboard tray of Table computer complete all as per drawing, as specified and as directed.

All as per Srl item No 80 here-in-before but drawer of Table computer complete all as per drawing, as specified and as directed.

All as per Srl item No 80 here-in-before but pull out mouse tray of Table computer complete all as per drawing, as specified and as directed.

Table Dining 6 With Sunmica Top (TP) Top for table dining 6 pers :Top : Removing of unserviceable table top, making to size fixing new top of required size 17-18 mm thick BWR plywood duly post formed as approved by GE. 2mm thick PVC edging binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as specified and directed. (Make :- Greenply/Century/Action Tesa/Archid)

Long rail of table dining 6 pers : Supply and fix leg made out of well seasoned 1st Class teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per drg after removing the old / broken one without damaging the other parts complete all as specified and directed but suitable for table dining 6 pers.

Short rail of table dining 6 pers : All same as per ser item No. 86 above but short rail.

Leg : All same as per item No. 86 above but leg.

All same as per item No. 86 above but wooden cleat.

Chair Medium School Supply and fix leg made out of well seasoned 1st Class teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per drg after removing the old / broken one without damaging the other parts complete all as specified and directed but front leg of Chair medium school

All as per item No 90 above but rear leg.

All as per item No 90 above but front rail .

All as per item No 90 above but back rail.

All as per item No 90 above but side rail.

All as per item No 90 above but back rest.

Teakwood for seat : M&L for change of seat of Chair Medium School of First Class Teak wood

All as per item No 90 above but stiffener .

Polishing M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer complete all as per drawing, as specified and as directed. (Drg No FD-361/233) (i) Hat Stand With Mirror

(ii) Table dressing Ladies with mirror complete all as per drawing, as specified and as directed (Drg No FD-251/ FD/MAP-II/07)

(iii) Table Centre two tier complete all as per drawing, as specified and as directed (Drg No FD-274)

(iv) Chair Dining with long back (MAP) complete all as per drawing, as specified and as directed(Drg No FD-357)

(v) Table Bed Side complete all as per drawing, as specified and as directed (Drg No FD-DB)

(vii) Rack Rifle for 20 rifles and 60 rifles :- (Drg No STD-M5) complete all as per drawing, as specified and as directed

(viii) Stool 2' High (FD-DB) complete all as per drawing, as specified and as directed

(ix) TABLE COMPUTER Wooden (4'x3')(TP) complete all as per drawing, as specified and as directed

(x) Table Dining 6 With Sunmica Top (TP) complete all as per drawing, as specified and as directed

(xi) Chair Med Shool complete all as per drawing, as specified and as directed

PAINTING :- M&L for removing existing paint by application of paint remover / grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint (hammer tone / dual tone) make/colour/ shade as approved by GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the following steel furniture items (internally & externally complete) :- Locker Bed Side steel (FD-257) complete all as per drawing, as specified and as directed.

(vi) Teapoy Verandha complete all as per drawing, as specified and as directed (Drg No FD-F6/MAP/17 )

Drg No :- (FD/E6/MAP/12) All as per Srl item No 20.00 here-in-before but Chair Writing (MAP) complete all as per drawing, as specified and as directed.

Drg No :- (FD/E6/MAP/01) All as per Srl item No 20.00 here-in-before but Chair Computer (MAP) complete all as per drawing, as specified and as directed.

Drg No :- (FD-TP) All as per Srl item No 32.00 here-in-before but Chair Revolving Low Back Steel complete all as per drawing, as specified and as directed.

Drg No :- (TP ) All as per Srl item No 32.00 here-in-before but Table Computer complete all as per drawing, as specified and as directed.

VARAROHA BUILDERS (BID ID -3277496)

Sunny Furniture Centre (BID ID -3276768)

CHAUDHARY FURNITURE HOUSE (BID ID -3277746)