SPECIAL REPAIR TO BLDG NO T 88 AT 2 TECH TRG BN 3 EME CENTRE AND SPECIAL REPAIR OF EXISTING WATER SUPPLY PIPELINES AT 4021 FD HOSP BAIRAGARH UNDER GE BHOPAL

Amount

Note:- (i) Please refer Sch A/ BOQ Notes before quoting the tender for all items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline.

Taking down chowkhats or frame n exc 1.5 sqm each with shutters (without taking off shutters from the frame) including fittings complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 sqm but n exc 4.00 sqm each with shutters (without taking off shutters from the frame) including fittings complete all as specified and directed.

S&F of powder coated aluminium fabricated work as in shutters/frames for doors, windows/ vents, partition as per manufacturer instructions including necessary jointing cleats, anodised aluminium snap beading, neoprane rubber beading with and including taking out damage portion of aluminium doors, windows or complete door/ window complete all as specified and directed. Note: Rates are including for necessary new fittings for door/window i.e handle, tower bolt, butt hinges, filling of gap between wall by silicon gel etc.

S&F of factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)proof and & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. Notes: (i) Stainless steel butt hinges and screws shall be included in the quoted rate of item. (ii) Material test certificate and authentication should be compulsory provided by the manufacturing company.

S&F of factory made 100% solid PVC flush shutter 28 mm thick, made from co-extruded three layer rigid PVC foam sheet (single extruded) with density not less that 600 kg/cbm outer layer (0.8-1 mm) thick should be of rigid pvc with density of not less than 1400 kg/cum manufactured by an ISO 9001-2015 certified company, door should be water proof, termite proof, fire retardant & having good screw holding capacity complete all as specified and directed.

S&F of factory made 30mm thick 100% Solid WPC (Wood polymer Composite) laminated wiremesh door shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with having minimum density not less than 650 kg/cbm, having good screw holding capacity, screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compissive of 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with property of being termite/ borer free, water/ moisture proof and fire retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter for fixing mosquito mesh and XTN aluminium mesh combinly panel area of door except stiles and rails to be panelled with mesh with self tapping round headed scresws at required distance, screws and edges covered with feathered pvc edge beading all around of mesh and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete all as specified and directed. Notes: (i) Stainless steel butt hinges and screws shall be included in the quoted rate of item. (ii) Material test certificate and authentication should be compulsory provided by the manufacturing company.

S&F of factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other fames/ chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Notes: (i) M.S. hold fast/ lugs or SS dash fasteners shall be included in the quoted rate of item. (ii) Material test certificate and authentication should be compulsory provided by the manufacturing company.

S&F of factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Notes: (i) M.S. hold fast/ lugs or SS dash fasteners shall be included in the quoted rate of item. (ii) Material test certificate and authentication should be compulsory provided by the manufacturing company.

M&L for providing cement concrete, 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in coping, bed blocks, lintels, cills, steps, seismic and other similer bands, kerbs and like etc complete all as specified and directed.

M&L for providing cement concrete, 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, joints of wall and roof sheets and the like and in similar works mixed with WPC as per manufacturer instructions complete all as specified and directed. Note: WPC shall be measured and paid seperately.

M&L for mild steel framed work such as in grills, gratings, railings, frame work of water tanks and the like conforming to Fe-290, Gde E-165 complete all as specified and directed.

S&F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperure 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F of 100 mm long stainless steel butt hinges, ISI marked, cast type and fixed complete all as specified and directed.

S&F of 150 mm long stainless steel handles, ISI marked, cast type and fixed complete all as specified and directed.

S&F of 150 mm long stainless steel tower bolts, ISI marked, extruded section and fixed complete all as specified and directed.

S&F of 300 mm long stainless steel sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc; laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 18 to 20 mm thick granite stone slab (any type) (table rubbed and polished) as in steps, jambs, pillars, window & door cills, cooking platforms, counter, shelves and like in cement mortar (1:4) over and including 15mm thick screed bed in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including making the edges bullnosed complete all as specified and directed.

M&L for 20-22 mm thick machine cut kota stone slab flooring of size 1200 x 600 mm (4' x 2') over and including 20 mm thick cement screed base in CM 1:6; laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

M&L for for 20-22 mm thick machine cut kota stone slab as in riser of steps, skirting, dado and pillar etc; over and including 10 mm thick rendering in CM 1:4; laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and making the edges bullnosed including rubbing and mirror polishing complete all as specified and directed.

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) in any description and in any position not other wise specifically provided for complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) 1:2:4, type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, chajjas and the like complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for flat finished surfaces complete all as specified and directed.

Demolition of cement concrete in ground floor (unreinforced) and paving n exc 15 cm thick (below or above GL) including tiling if any complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection, aprons, hard standing, path and like; finishing the surfaces even and smooth without using extra cement with and including making the grooves and filling the same with bitumen mastic complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge n exc 63 mm, deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling, sub base and mass concrete complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square /rectangular) joint free, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors; over and including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and directed.

M&L for coloured glazed ceramic tiles in walls/ vertical surface of size 350 x 250/ 450 x 300 & 7 mm thick over and including 10 mm thick rendering in CM 1:4 for backing of tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed.

Demolition of brick work, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with sub class ‘B’ (modular size bricks) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class ‘B’ (modular size bricks) straight or curved on plan any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces, including racking out joint, hacking for key, scrubbing down with water complete all as specified and directed.

S&F for wire netting of galvanised steel wire 1.40 mm dia of mesh size 12 mm, fixed with tinned tacks of wire staples for fixing at junction of wall, beam and columns prior to plastering complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on brick/concrete surfaces, finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on brick/concrete/stone masonry surfaces, finishing the surfaces even and smooth without using extra cement including mixing water proofing compound complete all as specified and directed. Note: WPC will be measured and paid separately.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for preparation of wall surfaces by cleaning the surfaces till it is free from dust, grease and flaking paint, any unstable paint to be removed, using high pressure wash or scraper, removing algae and fungus on the wall by using high pressure wash or coir brush and shall be treated with fungicidal solution, all surface cracks upto 5 mm width should be filled up with crack filler with and including applying two or more coats of damp proof coarse (Primeless high build water based elastomeric exterior wall waterproof acrylic coating for exterior surfaces) designed with weather resistant acrylate polymers, UV resistant, good hiding and spreading, developing a strong intercoat adhesion with the substrate therefore no separate primer is required, features such as waterproofing, UV protection, anti algal resistance, crack bridging of elastic films covering hair line cracks, long term protection, colour variants complete all as specified and directed. Note : (i) Applying paint by brush/ roller as self priming coat on the vertical wall surface in SSD condition, diluting 1 litre with 100 ml clean potable water and allow it to dry for 4-6 hours. (ii) Applying a coat of it without dilution as waterproof top coat, either by roller or brush with force coverage at the rate of 3.7- 4.1 Sqm / litre to achieve DFT of 100- 110 microns and allow it to dry for 4- 6 hours. (Lighter shades of white base on the top of dark colours need additional coat for finishing) (iii) An additional coat should be applied in case of horizontal surfaces like the top of windows, ledges, parapet wall etc and allow the coating to full air cure for 7 days.

M&L for two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre of required shade and colour, applied as per manufacturer's specification complete all as specified and directed. Note: Putty shall be measured and paid for separately under respective item.

M&L for applying a coat of 1.5 mm thick white wall care cement based water proof putty in two layers on walls complete all as specified and directed.

M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means with and incluidng applying two coats of oil emulsion distemper over coat of white cement based putty (where required) complete all as specified and directed. Note: Wall Putty shall be measured and paid separetely.

M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

S&F of 4 mm thick sheet glass, ordinary quality and glazing with oil putty/ wooden beads beading or fixed in aluminium surrounds complete all as specified and directed

S&F in repairs 25 mm dia stainless steel drapery/ curtain rod with fancy type brackets/holders for hanging and fixing complete all as specified and directed.

S&F in repairs 15 mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs stainless steel soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in replacement vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with and including white plastic seat cover with aluminium hinging device complete all as specified and directed.

S&F in replacement vitreous china WC squatting pan "Orissa Pattern" of size 580 x 440mm white with integral foot rests with and including provn of cement concrete bedding and 'P' or 'S' trap as required including connection to trap and to flush pipe, anti syphonage pipe, etc. and making good to floor complete all as specified and directed.

S&F in repairs syphonic action type PVC low level flushing cistern 10 ltrs capacity with 32mm dia flush pipe and fixing to supply pipe including PVC connection 600 mm long 15 mm bore with brass heads & washers and fixed complete all as specified and directed.

S&F in repairs vitreous china urinal, full stall type, white (excluding flushing cistern) but including CP waste fitting, PVC waste pipe and CP urinal spreader complete all as specified and directed.

S&F in repairs vitreous china urinal partition white of size 310 x 700 mm terminating about 40 cm above floor line with fastners complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs 100mm dia CP grating complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 600 mm and fixed complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) floor trap plain, fixed and jointed with solvent cement complete all as specified and direcetd.

S&F in repairs 125/110 mm bore PVC (SWR) gully trap, set and jointing with solvent cement complete all as specified and directed.

S&F in repairs chromium plated shower rose 125 mm size with or without swivel joints, with shower arms any size including fixing to steel pipe or union of 15 mm bore complete all as specified and directed.

S&F in repairs 15 mm bore stop valves, cast copper alloy, chromium plated, fancy type (Concealed type) with long shank and cup and capstan head, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15 mm bore bib taps, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed.

S&F in repairs 15 mm bore angle stop valves, cast copper alloy, chromium plated, fancy type with long shank and cup and capstan head, screwed down, screwed for iron pipe or union complete as specified and directed.

S&F in repairs 20 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors (Concealed type) complete all as specified and directed.

S&F in repairs 15 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors (Concealed type) complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs, precast man hole covers etc; and set in CM 1:4 complete all as specified and directed.

Excavating in trenches n exc 1.5 m deep and n exc 1.5 m wide for foundation, manholes, pipes, cable, etc; and getting out in any type of soils complete all as specified and directed.

Demolition and breaking up of 150 mm dia drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M&L for cement concrete 1:4:8, type D-2 (uisng 40 mm graded stone aggregate) as concrete bed to 150 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for cutting into existing manholes/ septic tanks for connecting new drains, making good to pipes and rendering, cutting out existing benching for forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1, smooth finished and reforming benching as required for 150 mm dia pipe complete all as specified and directed.

Returning, filling in any type of soil including spreading, levelling, watering and well ramming in layers n. exc 25 cm complete all as specified and directed.

Removing excavated material to a distance exc. 500 m but n exc. 1.5 km and depositing where directed at a level n exc 1.5 mtr above starting point all as specified.

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/floors complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls fixed with MS clamps complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal and jointed with solvent cement complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) bends of any radius and jointed with solvent cement complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) vent cowl and fixed complete all as specified and directed.

S&F of mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F of rolled mild steel work as in rafters, purlins, trusses and like (beam, tee, angle, channel or flat sections) including cutting to required length and necessary welding etc; of Fe 410-W(Gde E-250 quality complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings, including ridge complete all as specified and directed.

S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa (AZ-150) as in roof covering / cladding to wall, chajjas, etc. and fixed with self tapping screws complete all as specified and directed

S&F of pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa (AZ-150) as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted steel or iron surfaces of any description, exceeding 10cm width or girth and applying one coat of synthectic enamel paint of approved tint complete all as specified and directed.

M&L of preparation of new or previously untreated wooden surface of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness including cover fillets complete all as specified and directed.

M&L for anodised aluminium snap grid frame work for false ceiling of size 605x605 mm using 24 x 38 x 0.50mm (composite thickness) tee (bottom pre-coated) and 24 x 24 x 0.50mm (composite thickness) wall angle including hangers 6 mm dia. G.I. (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia, 40 mm long complete as per manufacturers instruction as in ceiling as directed.

M&L for providing and fixing Gypsum board 600 x 600 x 12mm thick as in false ceiling, fixed with screw or on grid frame work complete all as specified and directed.

S&F in repairs 18/19mm thick block boards, grade 2 quality, interior grade, commercial type, and both faces is covered with approved pattern decorative coloured laminate type 1 of 0.9mm thick and all around side faces is covered with decorative lipping in cup board shutter and fixed with wooden frame-work complete alll as specified and directed.

M&L for 2nd class hard wood plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads of cross sectional area exc 13 but n exc 25 sq cm complete all as specified and directed.

S&F for hydraulic soft close auto hinges, thickness 1-1.5 mm, size 8 Inchs of 90 degree opening angle silver colour and fixed with screws to cupboard and similar work complete all as specified and directed.

S&F of brass drawer/ cupboard pulls, 3 screw plate with fixed dished pull; 80 mm to 100mm long fixed with nuts, screws and washers of brass polished, bright finished complete all as specified and directed.

S&F of brass cupboard locks, grade I, size 50 mm, 2 levers and fixed complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base concrete complete all as specified and directed.

M&L for sand cushioning with clean dry sand for laying of interlocking paver block complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block reflective type (glossy finish) any shape and size of 60 mm thick, M-35 Grade with grey cement and pigments complete all as specified and directed.

M&L for point wiring for one light / fan / bell point with 1.50 sqmm (nominal area) FRLS PVC insulated, unsheathed, multi-stranded copper conductor cable, 1100 volts grade, controlled by one one-way switch, drawn in & including non metallic rigid PVC conduit, concealed (ISI marked) medium grade not less than 20mm diameter with all conduit accessories in concealed wiring system by cutting of walls (brick or stone) and making good disturbed surface of wall in CM 1:3 (except on ceiling for fan point only, surface casing capping will be used in lieu of concealed PVC conduit) including one run of 1.5 sqmm copper conductor as earth continuity wire connected to common earth dolly, sunken sheet steel terminal box made out of 1.20 mm thick GI/MS sheet for mounting of modular fittings like switches, sockets, fan regulators etc. complete all as specified and directed.

All as per item No. 99 here-in-before but for 3 pin 5 Amp socket outlet on independent board.

All as per item No. 99 here-in-before but one 3 pin 5 Amp socket outlet on same board.

All as per item No. 99 here-in-before but 3 pin 15 Amp socket outlet on independent board and electric wiring with 2.5 sqmm copper conductor cable.

S&F of modular switch piano, one module, single pole, one way, 6 Amps, 240 volt, 50Hz, AC, ISI marked complete all as specified and as directed.

S&F of modular switch piano, one module, single pole, one way, 16 Amps, 240 volt, 50Hz, AC, ISI marked complete all as specified and as directed.

S&F of modular socket outlet, 2 module multipurpose having provision for 2/3 pin, 5/16 Amp, 230 volt AC complete all as specified and as directed.

S&F of ceiling rose surface bakelite, three terminals, 230 volt AC complete all as specified and as directed.

S&F of modular white colour plate with frame, 14 module complete all as specified and directed.

S&F of modular white colour plate with frame, 8 module complete all as specified and directed.

S&F of modular white colour plate with frame, 4 module complete all as specified and directed.

S&F of modular white colour plate with frame, 3 module complete all as specified and directed.

S&F in repairs LED tube light fitting, surface mounted lumanaires, 1 x 20 W, 240 V, decorative ultra slim round /squar profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack with bipin holders, LED lamps, connector block, etc. complete with all accessories internally prewired and including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed.

S&F of ceiling fan complete with blades, down rods and accessories, 230 volts, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Note: Old unserviceable ceiling fan will be deposited at MES store yard.

S&F of exhaust fan, rust proof steel body, 230 Volts AC, single phase of size 300m sweep with blades, frame and louvers and all necessary fittings with and including drilling of hole and repair of disturbed surfaces complete all as specified and directed. Note: Old unserviceable exhaust fan will be deposited at MES store yard.

S&F in repairs building security light fitting 30 Watt, made up of pressure die cast aluminium housing with high efficient LED as lighting source and pc over having top opening separate driver compartment with IP-66 protection and impact resistance of IK-07 including suitable galvanized iron light grade pipe brackets of 1 mtr length, bent to shape to obtain required shape including clamps, nuts, bolts, washers etc; and making connection with suitable copper wire of size 23/0.0076 complete all as specified and directed.

S&F in repairs factory made epoxy powder coated distribution board, TP & N, 4 ways (VTPN MCCB DB) and space for MCCB as incomer, with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall, suitable for universal mounting and including isolated neutral bar, insulated bus bar assembly, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts complete all as specified and directed.

S&F of sheet metal enclosure for SPN DB (single pole and neutral) single door type, surface mounted, concealed in wall, 8 ways, 240 Volts, IP 43, ISI marked with 200 Amps rated bus bar, dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed. Note:- MCB shall be measured and paid separately.

S&F of MCB, SP, 240 volts, 10 KA breaking capacity, 'C' curve, of capacity 6 to 32 Amps including making connection with suitable size aluminium / copper lugs complete all as specified and directed.

S&F of MCB, SPN, 240 volts, 10 KA breaking capacity, 'C' curve, of capacity 32 Amps including making connection with suitable size aluminium / copper lugs complete all as specified and directed.

M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core PVC insulated FRLS cable 1100 V unsheathed with stranded copper conductor of 6.0 sqmm nominal cross section area and drawing into rigid non metallic PVC conduit, ISI marked, medium grade inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. of 20 mm external diameter and PVC insulated stranded copper conductor of 4 sqmm nominal cross section area as earth wire including taking down old unserviceable sub main wiring complete all as specified and directed. Note: Two runs of 6 sqmm cable, one run of 4 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length.

M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core PVC insulated FRLS cable 1100 V unsheathed with stranded copper conductor of 4.0 sqmm nominal cross section area and drawing into rigid non metallic PVC conduit, ISI marked, medium grade inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. of 20 mm external diameter and PVC insulated stranded copper conductor of 2.5 sqmm nominal cross section area as earth wire including taking down old unserviceable sub main wiring complete all as specified and directed. Note: Two runs of 4.0 sqmm cable, one run of 2.5 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length.

M&L for earthing complete with galvanised steel plate earth electrode 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of size 32x6 mm galvanised mild steel wire by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 x 40 x 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 20 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and directed.

S&F in repairs LED ultra slim decorative aluminium casted edge ceiling light, protuded type ceiling mounted LED 2' x 2' luminaire, 36 watt with all accessories internally prewired and making connection with PVC insulated multistranded copper flexible cable 0.5 sqmm two core complete all as specified and directed.

S&F of LED light fitting mirror type with high out put diffuser of 2 feet long, 10 watt, 220 Volts AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repairs sheet metal earth plug & socket, single pole and neutral with and including 1 no. single pole MCB 20 Amps 240 volts complete all as specified and directed

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 25 sqmm, 4 core, 1100 volts grade, laid in trenches, passing through pipes/ducts, etc; including taking out old unserveciable cable, any type complete all as specified and directed.

M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection (8 cm below cable & 15 cm above cable) complete all as specified and directed. [Note:-Compacted/punned thickness shall be measured & paid]

Supplying and laying reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed.

S&F in replacement 40mm GI tubing light grade (as per IS -1239) with all fittings as required for passing through cables under floors, along the wall/ pole, etc; with suitable size M.S. flat iron clamps incl nuts, bolts and washers complete all as specified and directed.

S&F in replacement rotational moulded polyethylene water storage tanks, 3 layers (cylindrical vertical with closed top) of capacity 500 litres, hoisted including all fittings as required and fixed in position complete all as specified and directed.

S&F in replacement rotational moulded polyethylene water storage tanks, 3 layers (cylindrical vertical with closed top) of capacity 1000 litres, hoisted including all fittings as required and fixed in position complete all as specified and directed.

S&F in replacement rotational moulded polyethylene water storage tanks, 3 layers (cylindrical vertical with closed top) of capacity 2000 litres, hoisted including all fittings as required and fixed in position complete all as specified and directed.

Supply and laying 20 mm bore GI tubing medium grade (as per IS 1239) inclusive of all fittings laid in trenches with and including provision of tapping to main water pipeline complete all as specified and directed.

Supply and laying 25 mm bore GI tubing medium grade (as per IS 1239) inclusive of all fittings laid in trenches with and including provision of tapping to main water pipeline complete all as specified and directed.

S&F in repairs Gun-metal gate valves of size 20 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs Gun-metal gate valves of size 25 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs Gun-metal gate valves of size 50 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Taking up or down 100 mm bore CI water main pipe including fittings with spigot and socket/ both side flanged ends and burning out lead joints including recovering lead complete all as specified and directed.

Taking up or down 25/ 50 mm bore GI water main pipe including fittings complete all as specified and directed.

Supply, laying, jointing and testing of 100 mm bore DI pipes, SS class, K-9 of standard length with internal cement mortar coating and external surface with bituminious paint, IS: 8329 including tyton joint, nuts, bolts, packing material etc; and making the joint leak proof complete all as specified and directed. Note: Earth work, joints and CI/DI specials/fittings of the pipes shall be measured and paid separately under appropriate item.

Supply, fixing/ laying, jointing and testing 25 mm bore GI tubing medium grade with one socket, both end threaded in any length with providing all type of GI new fittings including cutting, threading and making connection in new or old position, laid in trenches/ wall/ ceiling/ floor complete all as specified and directed.

Supply, fixing/ laying, jointing and testing 50 mm bore GI tubing medium grade with one socket, both end threaded in any length with providing all type of GI new fittings including cutting, threading and making connection in new or old position, laid in trenches/ wall/ ceiling/ floor complete all as specified and directed.

Cutting of cast iron pipes of 100mm bore in position for insertion of new tees, branches, etc; comprising of two cuts complete all as specified and directed.

S&F in repairs of cast iron flanged sluice valve of 100mm size, class PN-1.0, long body, ISI marked, conforming to IS:14846 with stainless steel spindle and hand wheel including nuts, bolts, rubber gaskets complete all as specified and directed.

Supply, fixing and testing of DI pipe fittings (specials) heavy duty for any type (flanged/ socketed) such as bends (any type radius and angle), tappers, any type straight bend, increasing, decreasing or double socket, Tee pieces, ring branch, 'Y' junction double branch, cross (all socket or socket and spigot), collors, caps and plugs, adopters etc of any size radius and length conforming to IS 9523/2000 specifications with external bitumen coating and internal cement mortar lining and metalic zinc coating upto 200 mm bore complete all as specified and directed.

M&L for replacement of valve pit cover fabricated from 3 mm thick mild steel sheet and angle iron 40x40x6mm, fabricated with two shutters with and including preparation and applying two coats of synthetic enamel paint over a coat of red oxide primer including providing 50mm size brass lock with key and locking arrangement for pit size 1200 x 1200 x 1200 mm complete all as specified and directed.

S&F in repairs 20 mm bore PVC float valve, high pressure of PTMT with epoxy coated aluminium rod and hight density plastic ball and fixed with fittings such as socket, nipple, union etc complete all as specified and directed.

Deduct amount of Rs. 134,288.00 for Schedule of Credit (Calculation will be done ofline)

AJIT ENTERPRISES (BID ID -3271120)

BRIJLAL UPADHAYA (BID ID -3271354)

M/S RAKESH TRADERS (BID ID -3271030)