SPECIAL REPAIRS TO BLDG NO P 18 ORS MD ACCN 09 QTRS OF 1 MARATHA LI UNDER GE MH AND RH KIRKEE.

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding [but not backing coat] and removing serviceable tiles to the stores and removing rubbish / debris of the premises outside MD land complete all as specified and as directed.

M & L for Non Skid Ceramic Tiles, Coloured, of size exceeding 0.11 Sq.m and not exceeding 0.18Sq.m, 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar (1:4) complete all as specified and as directed.

M & L for Non Skid Ceramic Tiles, Coloured, of size exceeding 0.11 Sq.m and not exceeding 0.18Sq.m, 8 mm thick [Square or Rectangular] as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match (light colour), laid over and including 10mm thick backing coat in cement mortar (1:4) including triangular filleting on top in cement mortar (1:4) complete all as specified and as directed.

M&L coloured glazed ceramic tiles 350 x 250 x 7 mm/450X300X7 mm thick, in vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade on vertical surface laid over and including 10mm thick backing coat in cement mortar (1:4) including triangular filleting in cement mortar (1:4) complete all as specified and directed.

M&L Non skid ceramic colour tiles 7 to 8mm thick (square /rectangular ) area of each tiles exceeding 0.06 sqm but n exc 0.11 sqm in floors etc in neat cement slurry and pointed in white or Coloured cement to match including 15 mm thick screed bed before tile complete all as specified and directed by Engr in Charge.

Taking down cement plaster on brick, concrete or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and removal of rubbish out side MD land complete all as specified and as directed.

M & L for 15 mm thick plastering in cement mortar (1:4) on walls finished the surfaces even and fair ( upto any height) complete including using WPC mixed with cement mortar as per manufacturer instruction complete all as specified and directed.

M&L for applying two coats of cement base paint over a coat of primer on new wall surface including prepration of new surfaces complete all as specified and as directed.

M & L for applying two coats of cement base paint on walls including washing, rubbing down and stopping of old surfaces including priming with primer complete removal complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:4 finished even & smooth w/o using extra cement but as in ceiling with thin layer of sagol finish complete all as specified and directed

M & L for applying three coats of white wash on Ceiling on new surfaces including preparation surfaces complete all as specified and as directed.

M & L for applying one coat of white wash on Ceiling on old surfaces including preparation of old surfaces complete all as specified and as directed.

M & L for 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces including finishing the surface with a thin layer of sagol complete all as specified and as directed.

M & L preperation of new plastered surfaces & applying two coats of oil bound distember over 3mm thick wall care puty over a coat of alkali resistant primer. complete all as specified and as directed.

M&L for complete removal of existing finishes and applying two coats of oil bound distemper on walls over a coat of alkali resistant primer including 3 mm thick wall care putty preparation of old surfaces , on plastered surfaces prepratary to distempering complete all as specified and as directed.

M & L for applying three coat of white wash on wall including preparation of new surfaces all as specified and directed.

M& L for complete removal of existing finishes and applying three coats of white wash on walls including preparation of old surfaces all as specified and directed.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for Preparation of old steel surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

Hacking out old broken glass (any thickness, size, quality or description) from MS frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads including punching or drilling out old glazing pins / spring clips complete all as specified and as directed.

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed.

S&F figured /frosted glass,4mm thick sheet glass ordinary quality n.exc 0.5sqm each pane and fixed in repairs complete all as specified and as directed.

S & F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixing to steel window with nut bolt,fixed in repair. complete all as specified and as directed.

Dismantling of old Granite slab of any description complete all as specified and as directed.

M & L for 20mm thick Granite slab machine cut in laid over cement screed and jointed with grey cement slurry and pointed with white or colour cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete including screed bed 15mm thick in CM 1:4.complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations. complete all as specified and as directed.

Taking up or down carefully 15mm bore steel water tubing, and connections with fittings including cleaning for re-fixing or removal complete all as specified and as directed

Taking up or down carefully 20mm bore steel water tubing, and connections with fittings including cleaning for re-fixing or removal complete all as specified and as directed

S&F 15mm bore GI tubing ISI marked of size 'medium grade' with and including all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc laid in floors /wall/ceiling and including clips, wall hooks etc, complete all as specified and directed

Refixing only 15mm bore GI tubing ISI marked of size 'medium grade' with and including new all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc laid in floors /ceiling and including clips, wall hooks etc, complete all as specified and directed (Note: Old GI pipes as obtained from taking down shall be used under this item)

S&F 20mm bore GI tubing ISI marked of size 'medium grade' with and including all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc laid in floors /wall/ceiling and including clips, wall hooks etc, complete all as specified and directed

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and as directed.

S & F in repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed - bore dia of pipe 15 mm. complete all as specified and as directed.

S & F in repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed - bore dia of pipe 15 mm but fancy type with long shank and cup ( concealed type) complete all as specified and directed by Engineer in Charge.

S&F in repairs 15mm dia fancy type Bib taps, cast copper alloy CP with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.complete all as specified and as directed.

S & F in repair,Chromium plated shower roses with or without swivel joints, 125mm size, including fixing to steel pipe or union complete all as specified and as directed.

S & F in repairs Vitreous China Squatting pan Orissa pattern long pan, size 580 mmX440mm white with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including concrete bedding complete including making good to floor complete all as specified and as directed.

S & F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed.

S&F plate rack made of stainless steel 1mm thick and overall size 915mm x915mm x 255mm, inlcuding taking down old /unsv complete all as specified and directed.

S&F in repairs vitreous china wash basin white, flat back of size 550 x 400mm, excluding taps, waste chain & plug & porcelein stopper but including brackets, cutting for and pinning in ends of brackets including waste coupling and waste pipe complete all as specified and directed.

S&F in repair pillar taps 15mm Bore dia of pipe fancy type cast copper alloy with capestan heads chromiun plated screwed down high pressurewith hot &cold with long screwed shanks and fly nuts complete all as specified and directed.

S&F in repair ,stainless steel sink, 1mm thick, kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including waste coupling and waste pipe complete all as specified and directed.

S & F PVC connections 15 mm size with PTMT nuts of 600 mm long complete all as specified and directed.

S&F Corner shelf of pre polished colourful 18mm thick Granite and min 30cm dia including cutting wall, fixing and making good all as specifed and directed by Engineer in Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm complete all as specified and as directed.

SS&F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube,and fixing in opening as per manufacturer's instructions and as directed by Engineer-in-Charge. complete all as specified and as directed.

S&F to the frame at site, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be coverd with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed in the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, as per manufacturer's instructions and as directed by Engineer-in-Charge.

S&F extruded aluminium alloy handles, fabricated type, anodised 150 mm size, ISI marked complete all as specified and as directed.

S&F150mm size Aluminium anodised barrel tower bolt of extruded sectin ISI marked complete all as specified and directed

S&F 100 mm Stainless steel butt hinges medium weight, cold rolled ISI marked complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5sqm but not exceeding 4sqm complete all as specified and as directed.

S & F pressed steel frames made out of 1.25 mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc. complete as specified size of frame 105 x 60 mm complete all as specified and as directed.

S & F pressed steel frames made out of 1.25 mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc. complete as specified size of frame 125 x 60 mm complete all as specified and as directed.

M & L for cement concrete 1:3:6 type C-0 using 12.50mm graded stone aggregate for filling in pressed steel door frames complete all as specified and as directed.

M&L for Cutting holes in existing wall or PCC Block masonry built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required depth of embedded portion of holdfast or lugs measured from the face of jamb into the wall exceeding half brick but not exceeding one brick complete all as specified and as directed.

M & L for cement concrete 1:2:4 type B using 20mm graded stone aggregate for filling in holdfast complete all as specified and as directed.

S & F 30mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S & F 35mm thick factory made second class hard wood plain, framed , panelled shutter (2 panel) with lock rail and panel commercial ply or 12 mm veneered particle board of 9 mm B.W.P commercial veneering on both faces.The size of rail and stile as per IS:1003 (part-I), kiln seasoned and chemically pressure treated all as directed.

Supplied and fitted to chowkats 35 mm thick factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); all as directed.

S&F in repairs 300mm, MS door springs including roller and roller plate complete all as specified and as directed.

S&F aluminium alloy, anodised, sliding door bolts 300mm long with hasp, staple (bolt type) ISI marked. and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed.

S&F Steel ventilators with centre hung shutter including hinges, steel peg stay, complete all as specified and as directed.

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all as specified and as directed.

M&L for preparation of new steel surface of any description not otherwise described over 10 cm width or girth and applying, two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for preparation new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of one coat of pink primer complete all as specified and directed.

S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixing to steel window with nut bolt complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm dia ,single socketed in any length with rubber ring joints fixed to walls including clamps etc complete all as specified and as directed.

S&F in repair,PVC (SWR) pipes 75 mm dia ,single socketed in any length with rubber ring joints fixed to walls including clamps etc complete all as specified and directed.

S&F in repair,PVC (SWR) bends any radius,for 110mm dia pipe. complete all as specified and directed.

S&F in repair,PVC (SWR) bends any radius, 75mm dia pipe. complete all as specified and as directed.

S&F in repair,PVC (SWR) branch piece, single (single Y) equal or unequal,for 110mm dia pipe complete all as specified and directed

S&F in repair,PVC (SWR) branch piece, single (single Y) equal or unequal,for 75mm dia pipe.complete all as specified and directed

S&Fin repair,PVC (SWR), junction single, (Single T) equal or unequal,for 110mm dia pipe. complete all as specified and directed.

S&F in repair,PVC (SWR), junction single, (Single T) equal or unequal,75mm dia pipe. complete all as specified and directed

S&F in repairs powder coated aluminuium pipe 20 mm dia as in curtain rod fixed to brackets complete all as specified and directed. Note : brakets shall be measured and paid separately.

S & F in repairs powder coated aluminium brakets fancy type for curtain rods of 20mm dia complete all as specified and directed.

M/L for application of one coat of CORE COAT LP (F) Make: Build Core Chemicals, and grouting a slurry coat of neat cement using 2.70Kg/Sq Mtr of cement admixed with liquid water proofing admixture and one coat of SBR cement over the existing RCC slab/Beam including thorough cleaning of the surface before treatment

Demolition of cement concrete (unreinforced) in ground floors and pavings exc 15 cm thickness (below or above ground level ) and removal of debris out side the MD land complete all as specified and directed

M&L for waterproofing treatment to RCC sunken slab as specified below. Make: PIDILITE or equivalent as approved by GE.

(a) creating fillet coving of 50mmX50mm with polymer modified mortar using cement : sand : URP.

(b) Applying PU sealant at the junction of pipes and the RCC sueface.

(c) Apply1st coat of two component cementitious coating, over the surface and taking the coating on the walls over the angle fillet / watta portion.

(d) Lay 40gsm geotextile fleece at the watta portion.

(e) Apply 2nd coat of two component cementitious coating, over the first coat and taking the coating on the walls over the angle fillet / watta or vertical faces after 6 -8 Hrs.

(f) Applying 12mm thick plaster in C:M 1:3 with waterproofing compound conforming to IS 2645:2003 @ 250ml per bag of cement.

M & L for PCC 1:4:8 type D2 (uisng 40mm graded stone aggregate) as in filling, mass concrete for sunken floor , complete all as specified and directed.

Supply only liquid water proofing complete all as specified and directed.

M/L for spot welding for repairing steel windows and ventilators hinges, brackets, steel handle, etc. complete all as sepcified and directed.

M & L 75mm PVC (SWR) multifloor trap with grating including jointing with solvent cement complete all as sepcified and directed.

S & F in repairs rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered 'ISI' marked, of capacity 500 litre alongwith ball valves suitable for 20mm bore iron pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe hoisted and fixed in position including dismantling water tanks and removing from site complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc.

M & L for point wiring with copper conductor PVC single core sheated multi stranded cable for Phase, Neutral and earth wire of 1.5 sqmm (nominal area) single core multi stranded copper conductor FRLS PVC insulated unsheated cable 1100 Volts drawn through PVC Conduit Medium Grade ISI mark suitable size incl accessories such as tee, bend ,elbow, including 1.5 sqmm PVC insulated and PVC unsheathed single core multistranded copper conductor cable 1100 V grade as earth wire including metal box with 3 mm thick laminated sheet of suitable size for housing switch, socket, regulators etc. complete for the following:-

(a) One light point controlled by one switch

(b) One Fan point controlled by one switch

( c) One light point controlled by two way switch

( d) One 5 pin 6 Amps socket outlet on same board.

( e) One 5 pin 6 Amps socket outlet on independent board.

(f) bell /buzzer point controlled by one push button on the same board with other switches or indipendent with cables 1.5 sqmm size.

All as per item No 87 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor 1100 v grade PVC FRLS insulated but unsheheted single core multi stranded pvc insulated unsheathed copper conductor cable 1100 volts grade for 16 Amps power point on independent board and 2.5 sqmm cable PVC FRLS as earthwire.

S & F switch piano type 230 volts single pole one way 6 Amps complete all as specified and as directed

S & F switch piano type 230 volts single pole two way 6 Amps complete all as specified and as directed

S & F socket outlet 5 pin 6 Amps shuttered flush type complete all as specified and as directed

S & F switch piano type 230 volts single pole one way 16 Amps complete all as specified and as directed

S & F socket outlet 2 in 1, 3 pin, 6 and 16 Amps flush type complete all as specified and as directed

S & F PVC Angle Holder / Batten Holder surface type three terminals type complete all as specified and as directed

S & F PVC ceiling rose surface type three terminals type all as specified and directed.

S & F fan regulators electronic step type suitable for 1200/1400 mm sweep ceiling fans complete all as specified and as directed

S & F Bell push flush type 5 Amps 230 V complete all as specified and as directed

S & F Bell AC 230 V single pole complete all as specified and as directed.

Taking down old unserviceable fitting and S & F wall mounted high quality indoor batten LED tube light with PVC housing, T-8 LED tube rod 20 watt with T-8 LED batten type with integral electronic driver 20 W, colour temperature 6500 K(4" long) operating life 50000 hrs lumen 2000 -3000, diffused connecting with three core flexible copper wire from connecto to ceiling rose/angle holder as directed. Make : C & S Cat Pat No LTDC0161820WLED+LTF20WLEDT8/WDI or equivalent in Wipro/Philips as approved by GE.

Taking down old unserviceable fitting and S & F wall mounted high quality indoor batten LED tube light with PVC housing, T-8 LED tube rod 10 watt with T-8 LED batten type with integral electronic driver 10 W, colour temperature 6500 K(2" long) operating life 50000 hrs diffused connecting with three core flexible copper wire from connecto to ceiling rose/angle holder as directed Make : C & S Cat Pat No LTDC01210WLED/WD or equivalent in Wipro/Philips as approved by GE.

S & F distribution board factory made TPN 8 way in, 415 Volt, double door including taking down the existing DB provision for fixing MCBs as out going and including TPN MCB 63 Amps as main incoming and makeing good the distrubed surfaces complete all as specified & directed. Make; Legrand / L&T / ABB as approved by GE. Note; Cost of MCBs will be measured and paid seperately.

S & F distribution board factory made SPN 8 way in, 240 Volt, single door including taking down the existing DB provnvision for fixing MCBs as out going and SPN MCB 32 Amps as main incoming and makeing good the distrubed surfaces complete all as specified & directed. Make; Legrand / L&T / ABB as approved by GE Note; Cost of MCBs will be measured and paid seperately.

S & F distribution board factory made SPN 2 way in, 240 Volt, single door including taking down the existing DB provnvision for fixing MCBs as out going and SPN MCB 16 Amps as main incoming and makeing good the distrubed surfaces complete all as specified & directed. Make; Legrand / L&T / ABB as approved by GE. Note; Cost of MCBs will be measured and paid seperately.

S & F MCB TPN 63 Amps 'B' series 10 KA with two position DIN Rail clamp. complete all as specified & directed. Make; Legrand / L&T / ABB as approved by GE

S & F MCB DP upto 32 Amps 'B' series 10 KA with two position DIN Rail clamp. complete all as specified & directed. Make; Legrand / L&T / ABB as approved by GE

S & F MCB SP 5 to 30 Amps 'B' series 10 KA with two position DIN Rail clamp complete all as specified & directed Make; Legrand / L&T / ABB as approved by GE

S&F PVC blank plate suitable for MCB DB complete all as specified & directed

Design, fabrication, supply and install, including taking down old unserviceble panel board and testing commissioning indoor panel board wall mounted 1.2 mtr (L) X 0.1 mtr (H) X 0.3 mtr (D) including necessary wiring with multi stranded copper conductor FRLS of 2 Run of 4.0 Sq mm incuding cable tray, trace out incoming and out going cable connection, thimbles of size as required, cubical indoor type, made out of 2.00 mm thick CRCA sheet, weather and vermin proof with IP-54 protection, including provision of dash board 2mm thick CRCA sheet for mounting of 09 Nos of single phase meter, front openable with double door & having, locking arrangments on both doors, wall mounted with Anchor fastner bolt suitable height from floor level, facotry made duly powder coated and write name of Qtr No and Bldg No on panel board.

Supply & fix AC single phase static energy meter LPRF of accuracy class 1.0, 240 V, 50 Hz with Backlit LCD display of rating 5 - 30 A, (measures and displays KWH ,V, Current I, KW, pf last month history of KWH, MD in KW) with special features like TOD, temper logging, optical communication port display in absence of power with transparent hinge type box including dismentaling and depositing in MES store yard complete all as specified and as directed

S&F exhaust fan, AC single phase 230/ 240 V of size 300 mm sweep, metal body, double shield ball bearing medium duty with louver including fixing of mounting frame in the round hole cutitng in the wall and making good the distrubed surfaces by means of rugged bolts, nuts and washers etc including three core copper conductor flexible cord of 0.5 sqmm cross sectional area of required length from ceiling rose to the porcelain connector block of exhaust fan complete all as specified and as directed Make: Havells/V-Guard/Crompton as approved by GE.

Supply & fix ventilation fans metal body heavy duty AC single phase 230/ 240 V of size 250 mm sweep all as specified and as directed.

M&L for sub main wiring using two single core multistranded PVC insulated copper conductor FRLS of size 6 sqmm 1100 volt grade drawn through suitable PVC conduit concealed including 6 sqmm PVC multi standard cable FRLS in green colour in existing surface / recess steel / PVC conduit or extended including taking down for continueous earth wire. Note : Two runs of main copper wire, one run of earth wire cable & PVC conduit and conduit shall be measured together as one unit length

M & L for earthing complete with galvansihed steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level connected to 4.0 mm dia galvansihed earth lead wire by means of nuts bolts check nuts and GI washers including PCC pit in PCC 1:2:4 type B-1 RCC cover 20 mm dia (medium grade) GI watering pipe with funnel wire mesh and protection pipe of GI of suitbale size upto 7.5 mtr length including charcoal black cotton soil as required at site to achieve the earthing result and common salt, excavation earth work etc in any type of starta complete all as shown in electrical palte No 3 of SSR part-I, GI wire suitable size and length for continuity earth wire from test point to main distribution Board and all as directed. (Note: Rate for achieving required depth by compressor machine/breaker if required is deemed included in item unit rate.)

Taking down carefully ceiling fan of any sweep, keeping with safe custody and refixing the same with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal over hauling the fan, replacement of fan condensor 2.5 Mfd and painted with synthatic enamel white colour paint by spray machine including filling of cavities with filler material complete all as specified and as directed.

M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and as directed.

ANJALI CONSTRUCTIONS

V.R.PRAJAPATI AND CO.