Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹32.4 LAccepted-AOC 58 SHAHEED NAGAR OPP BHIMRAO AMBEDEKAR UNIVERSITY RBL ROAD LUCKNOW 226025 UP | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226025 | 1 | Accepted-AOC L1 | |
| 2 | 2₹38.7 L+₹6.3 L (19.6%)Rejected-Finance GALI NO 5 6 H NO 6 275 JHARODA MAARA EXTN PART III BURARI NEW DELHI 110084 | NEW DELHI | CENTRAL DELHI | DELHI | 110084 | 2 | Rejected-Finance Not L1 | |
| 3 | 3₹44.9 L+₹12.6 L (38.8%)Rejected-Finance | 3 | Rejected-Finance Not L1 | |
| 4 | 4₹46.3 L+₹14.0 L (43.2%)Rejected-Finance 70 SUBHASH ROAD HARJINDER NAGAR KANPUR 208007 | KANPUR | KANPUR | UTTAR PRADESH | 208007 | 4 | Rejected-Finance Not L1 | |
| 5 | 5₹46.5 L+₹14.2 L (43.7%)Rejected-Finance 307 SADAR BAZAR LUCKNOW UP 226002 | LUCKNOW | UTTAR PRADESH | 226002 | 5 | Rejected-Finance Not L1 |
Tender Value
₹37 L
EMD Value
₹74,000
Closing Date
2 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Lucknow
HQ CWE Lucknow, 229 MG Road, Lucknow Cantt, Lucknow-226002
PROVN OF SINGLE OFFR ACCN G1 FOR 02 OFFICER AT ENGR OFFR MESS UNDER GE EAST LUCKNOW
2022_MES_557322_1
CWE/LKO/E/T-65 OF 2022-23
Open Tender
Civil Works
Item Rate
90 days
Lucknow
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE East Lucknow
₹74,000
Yes
4 Nov 2022
12 Oct 2022
3 Nov 2022
15 Oct 2022
2 Nov 2022
26 Oct 2022
15 Oct 2022 - 26 Oct 2022
Amount
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth in soft/loose soil for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying of pipe / cables etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete
Surface excavation n exc 30cm deep and average 15 cm for soft and loose soil
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm
Removing excavated material (soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point
M&L for Cement concrete type D2 1:4:8 (40 mm graded aggregate) as in foundations, filling and mass concrete
M&L for Cement concrete type F2 1:7:12 (40 mm graded aggregate) as in sunken, filling and mass concrete etc complete all as specified
M & L for Soil filling under floors or in foundation (except soil) including watering and consolidation
M&L for cement concrete type C2 1:3:6 (40 mm graded aggregate), 75 mm thick as in sub base of floors etc complete all as specified.
M&L for hardcore with broken bricks n exc 63mm deposited,spread and levelled watered and rammed to a true surface complete
M&L for cement concrete type C2 1:3:6 (40 mm graded aggregate), 75 mm thick and finishing the surface even and smooth w/o using extra cement as in plinth protection with joints and sealing compound etc complete all as specified.
M&L for brickwork with sub class B old sized bricks straight or curved in plan exc 6m mean radius in CM 1:6 complete all as specified and directed.
M&L for Rendering 15mm thick on fair faces of brick work or concrete in CM 1:4 complete all as specified.
M&L for screed bed 15 mm thick in CM 1:4 incl liquid water proofing compound @200 ml per bag of cement and finishing the surface even and smooth complete.
M&L for rendering 5 mm thick on ceiling and applying two coats of distemper over a coat of 1 mm putty complete.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alakli resistant primer complete all as specified.
M&L for RCC M-25 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for RCC M-25 as in Columns, pillars, piers, posts and struts complete all as specified and directed.
M&L for RCC M-25 as in beam , lintel etc complete all as specified and directed.
M&L for RCC M-25 as in staircase complete all as specified and directed.
M & L for use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surfaces of concrete complete
M & L for use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions, square or rectangular complete
M & L for use and waste of Formwork to sides and sofitts of beam complete
M & L for use and waste of Formwork to staircases with sloping or stepped soffits /sides including risers and stringers(excluding landing) complete
S&F rolled mild steel sections of Fe 410-W (Gde E-250) quality A as Pre engineering building structure with suitable design (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, paltes, bolts etc complete all as directed.
Design, supplying & fixing of Stay In Place (SIP) formwork consisiting of ho chloride hollow‐type rib‐reinforced Poly‐vinyl (PVC) material comprising of two PVC panel facings with internal PVC ribs, are used as permanent formwork for concrete wall. The web members are punched with cores to allow easy flow of the poured concrete between the components. After putting vertical & horizontal reinfocement as per the design, the hollow wall components are filled with concrete, in situ, to provide a monolithic concrete wall. the Specifications as as below:‐ Height should be within 0.5 to 6 mt. Panel width between ‐ 100 to 400 mm as per requirment, Thickness of profiles 110 to 200 mm, PVC thickness ‐ 2.5mm and density 1300 Kg/cum (a) SIP wall 64 mm
All as per above Item No 25 but SIP wall 125 mm
M&L for RCC (suitably designed for filling in SIP walls), any thickness complete all as specified and as directed.
M&L for TMT bars 10mm dia and over cut to length, bent to shape required as per the design including cranking and binding with Mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
S&F pressed steel frame for door with one or more rebates size 125x60mm including necessary fixing lugs, lock striking plates, hinges, hold fast etc. complete all as spcefied and directed
S&F pressed steel frame for door with one or more rebates size 105x60mm including necessary fixing lugs, lock striking plates, hinges, hold fast, etc.complete all as spcefied and directed
S&F for 35mm thick factory made prelaminated both sides, flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides, complete all as spcefied and directed .
S & F for 35mm thick, factory made, glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed.
S & F for factory made solid PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube all as specified and directed.
S & F for factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, in the frame all as specified and directed.
S & F casement windows & ventilators with net & grill single or multi shutter turn window made out of uPVC multi-cavity framed sections of 60x60x2.5 mm suitably reinforced and double multi shutters division are made by using sash mullion having 50x64x2.5 mm multi-cavity uPVC sections suitably reinforced with GI and shutters are made out of 50x85x2.5 mm uPVC sections, reinforced and welded in corners with EDPM gaskets, provided for glass and for air tight at frames and outer side of shutters with single glaze window shutters and using suitable glass bead with perfect hardware like hinges, handles, stays etc complete. Mosquito mesh shutter is made out of uPVC extruded section of 61x27x2 mm with GI channel of 1.2 mm thick, welded in corners, mosquito net of GI is fitted in shutters with proper required accessories like hinges etc, MS grill of 12 mm round pipe is inserted in main frame and screwed by hidden screwing system with powder coating and decorated handles etc complete all as specified and as directed . (Note - glazed shutters glass thickness not less than 4 mm and wiremess shutter with SS wiremesh as approved by GE is also included, no payment shall be made separately).
S&F 150mm long aluminium powder coated handles cast type, anodised, complete all as specified and directed.
S&F, 200 mm long aluminum powder coated barrel tower bolts of extruded section all as specified and directed.
S & F for mortice lock 100mm brass body with min 4 levers vertical type complete
S&F for 250mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as specified & directed (Fixed as in Existing iron /wooden frame in own arrangement).
S&F for stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples, complete all as specified and directed.
S & F for 140mm long floor door stopper of aluminum alloy body & tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed.
M&L for prepration of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description over 10cm width or girth complete all as specified and directed.
Design, Supply and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately)
M&L for RCC suitably designed for as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L for roof and sunken treatment by applying 3 coats of high performance elastomeric waterproofing coating @ 1.25kg/sqm, cold applied spray/brush applied, smartcare damp proof liquid membrane with an elongation of min 200 % solid content of min 50%, incl fibre mesh sandwiched between the second and thrid coat, only the first coat shall be 30% water diluted self priming coat complete all as specified and as directed.
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and Contd......
Contd........ 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095‐ (Part I) : 2011 (Board with BIS certification marks)
M&L for vitrified ceramic digital tiles 8-10mm thick (square/rectangular), joint free, polished, coloured (shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:4, complete all as specified and directed.
M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 15 mm thick screed bed in CM 1:6, complete all as specified.
M&l for 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement
S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls
S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls
S&F 75 mm bore PVC (SWR) bends any radius
S&F 110 mm bore PVC (SWR) bends any radius
S&F 110 mm PVC (SWR) junction single, (Single T) equal or unequal
S&F 160 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete.
S&F vitreous China, table top, wash hand basin of size 600 mm x 435 mm x 180 mm, fancy type including 32 mm dia waste coupling and waste pipe complete all as specified and directed.
S & F vitreous china pedestal pan EWC (Couple Closet Bowl) of size 370 x 640 x 760 mm including UF seat cover, hinges, S trap-220 mm, accessories set etc and vitreous china ware flushing cistern of complete al as specified and directed.
S & F CP brass center hole mixer for wash basin for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe size complete all as specified and directed.
S & F s CP brass center hole mixer for sink for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe size complete all as specified and directed.
S & F s CP brass telephonic type wall mixer for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe size complete all as specified and directed.
S&F long body bib cock fancy type 15mm dia chromium plated with cruter buterfly handle,serewed down,screwed for MS pipe or for brass ferrule
S&F Angle valve cast copper alloy with capstan head chromium plated screwed down high pressure with long shanks and fly nuts screwed for 15mm bore pipe
S&F 150x150 mm square CP OH shower rose fancy type with adjustable arrangement fixed as all as specified and directed.
S&F CP brass soap dish fancy type all as specified fixed as
S&F health faucet for EWC CP hand hold with flexiable pipe,bracket etc complete set of superior quality
S&F CP brass toilet paper holder all as specified fixed as
S&F Towel rails 20mm dia with brass chromium plated 600mm long fixed as make Jaguar or equvalent all as specified.
S&F towel ring 200 mm dia and made out of 8-10 mm dia hollow tubes superior quality complete all as specified and directed.
S&F Glass shelves fancy type 5-6 mm thick glass 600 mm long complete all as specified and directed.
S&F glass corner shelves fancy type 5-6 mm thick 250x250 mm size complete all as specified and directed.
S&F 15mm bore PVC connection 450mm long with brass/PVC coupling and washer as directed.
S&F PVC rotational moulded over head water storage tank 1000 Lts capacity with and incl top lid of screwed type complete all as specified.
S&F and Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight -20mm-210gms.)
S&F for 20 mm brass gate valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.
S&F for 25 mm brass gate valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.
S&F 20 mm steel Tubes, 'medium' grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.
S&F 15 mm steel Tubes, 'medium' grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.
S&F 25 mm steel Tubes, 'medium' grade' galvanised,with all fitting and fixed complete to floor / trenches / walls and ceilings or laid in floors complete all as specified.
S&F sinks with drainage board made of stainless steel 0.80mm thick for kitchen with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 550mm x 400mm x 200mm, complete all as specified & directed.
S&F Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm screed bed in CM 1:6 complete all as specified.
S&F Machine cut kota stone slab flooring 20-25mm thick over cement screed base 20 mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as in floors, treads and risers complete all as specified.
M&L for 10 users septic tanks, excavation in ordinary soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC (1:1.5:3) nominal mix using 20 mm graded aggregates, slab covers including RCC precast manhole covers having 6 mm plate embedded all around/fibre reinforced cover with angle iron frame vent shaft and sludge chamber etc as shown in Drg No TD/217 sheet no 1/2 &2/2 complete all as specified and as directed.
M&L for soakage well for 10 users, excadation vation in ordinary soil, foundation in PCC 1:3:6, wells of honey combed and solid in cement concrete 1:1.5:3 nominal mix incl intercepting chamber, screen chamber, brickwork in CM 1:4, precast RCC cover slab 1:1.5:3 nominal mix, filling with brick bats, size of soak well 1.20 m dia and 3.0 m effective depth as shown in Drwg No CELZ TD/576 sheet 1/2 and 2/2 complete all as specified and as directed.
Material and labour for one light / fan point controlled by one, one way switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall including sunken box for modular switches/sockets, regulators and white cover plate with frame of suitable modules etc and making good to the disturbed surfaces to match the existing complete all as specified and directed.
All as per serial item No 88 here-in-before but one, two way light point controlled by two, two way switches, 06 Amp.
All as per serial item No 88 here-in-before but one bell point controlled by one bell push, 06 Amp.
All as per serial item No 88 here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp.
All as per serial item No 88 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp.
All as per Serial Item No 88 here-in-before but point wiring with 2.5 Sq mm single core FRLS cables and earth continuity wire of 1.5 Sq mm single core FRLS cable for one 3 pin 16 Amp socket out let point controlled by one, one way switch on independent board complete all as specified and directed.
Supply and fix Modular switch 2 way 6A, 1 module, complete all as specified & directed.
Supply and fix Modular switch 1 way 6A, 1 module, complete all as specified & directed.
Supply and fix Modular bell push switch 1 way 6A, 1 module, complete all as specified & directed.
Supply and fix Modular 6A, 2/3 pin combined 2 module complete all as specified & directed.
Supply and fix Modular 6A/16A, 2/3 pin combined 2 module complete all as specified & directed.
Supply and fix ding dong bell, AC, 230 volt, single pole complete all as specified & directed.
Supply and fix fan regulator, 120W- 2 module (Modular type) complete all as specified & directed.
Supply and fix lamp holder, PVC / Polycarbonate type with back plate suitable for batten fitting complete all as specified & directed.
Supply and fix of decorative wall mounting type LED light fitting, 1 x 15 Watt, 230 Volt made up of Polycarbonate including shade, lamp holder, etc and all accessories pre-wired including connecting up complete all as specified and directed.
Supply and fix integrated LED bulk head fitting 10 Watt, 6500K with IP 65 protection comprises of high pressure die cast aluminium housing, polycarbonate cover, etc complete all as specified and directed.
Supply and fix single side connection LED T8 tube light rod 20 Watt, 6500K of four feet long into and including LED tube light fixture of four feet long with T8 push fit type holders, connector block, end caps, etc including connecting up complete all as specified and directed.
Supply and fix single side connection LED T8 tube light rod 8 Watt, 6500K of two feet long into and including LED tube light fixture of two feet long with T8 push fit type holders, connector block, end caps, etc including connecting up complete all as specified and directed.
Supply & fix LED wall/surface mounted down lighter, 12 W including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified.
S&F bed side lamp 5 Watt with min 1 feet adjustable handle 360 degree, single phase, white in colour, ISI marked, non flickering type all as specified and directed.
Supply and fix LED security light fitting 45 watt, 5700K with IP 66 protection comprises of a pressure die cast aluminium housing, heat resistance toughened glass, LED lenses, surge protector, electronic driver, etc and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sq mm, 3 core as required for connections and 32 mm bore light grade G. I. tube mounting bracket of 1.5 metre in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed.
Supply and fix ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed.
Material and labour for sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.
Material and labour for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.
Supply and fix industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volt of 20 Amp, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.
Supply and fix sheet metal enclosure distribution board, double door, single pole and neutral, AC, 240 volt, 12 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.
Supply and fix sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed and comprising of the following:- (a) MCCB, 125 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (b) MCB, SP, AC, 240 volt of 06 to 32 Amp, "C" curve, 10 KA breaking capacity - 04 Nos.
Supply and fix MCB, SP, AC, 240 volt of 06 to 40 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.
Supply and fix MCB, DP, AC, 240 volt of 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.
Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed.
S&F of exhaust fan metallic body single phase, 230/240 Volt of size 250 mm sweep 900 RPM including suitable louvers and making connection with twisted copper flexible wire 23/0.076mm all as specified and directed.
S&F of exhaust fan plastic body single phase, 230/240 Volt of size 250 mm sweep 1400 RPM including suitable louvers and making connection with twisted copper flexible wire 23/0.076mm all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed by Engr-in-Charge
Supply and fixing of stationery storage type electric BEE 5 star rated Hot Water Geyser of capacity 25 Ltr to operate on 230 volt AC, vertical type, white in colour, working pressure min 0.8 Mpa with glass lined coated tank, adjustable thermostat, ABS plastic body including 4 nos full threaded fastner of size 100 x 10 mm with 2 Nos washer, complete all as specified and directed.
Supply only LED bulb 9/10 Watts suitable for B22 white in colour all as specified and directed.
S & F Steel water tubing 50 mm bore with screwed & socket joints, medium grade, galvanized (including short lengths) with and including all necessary fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. laid in trenches complete as per IS-1239 part-II all as specified and directed.
S&F for 50mm brass gate valves, PN 1.6 cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.
M & L for construction of valve chamber size 450 x 450 x 600 mm with MS sheet cover 3mm thick with angel iron frame of size 50x50x6mm and locking arrangements including excavation and earth work in any type of soil, PCC (1:4:8) type D2 in foundation, PCC bed/copping in cement concrete (1:3:6) type C1,Masonary in CM (1:6) with PCC blocks of (1:5:8) , 15mm thick cement plastering in CM(1:4) painting the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed.
Supply, laying and fixing XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cable heavy duty 1100 Volts with stranded aluminium conductor of size 35 sq mm x 3.5 core complete all as specified and directed.
M & L for sand cushioning with dry fine sand including filling, spreading, levelling in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed.
Supply and laying 40 mm bore galvanised steel tubes with all fittings, light grade laid in trenches for cable protection complete all as specified and directed.
Supply and laying common burned clay bricks sub class B designation of old size bricks complete all as specified and directed.
QUALITY CONSTRUCTIONS CO
M/S SWATI CONSTRUCTION
M/S SHIVA CONSTRUCTION
M/s Vatsh Raj and co
BAJAJ CONSTRUCTION
M K Engineers and Contractors
A ONE ENGINEERING
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .