GE 861 EWS-23/2024-25

Amount

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

Demolition of brick work or stone boulder masonry built in cement mortar including all arches quoins etc but excluding ashlar facing, dressed stone work & precast concrete articles etc complete all as specificed and directed.

Demolition of cement concrete (unreinforced) in ground floors & paving n.exc 15 cm thick (below or above ground level) complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store complete all as specified and directed.

Taking down chowkhat or frames with shutters exc 1.5 sqm but n exc 4 sqm each (w/o taking of shutters from the frame) complete all as specificed and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) n/exe 1.50 Sqm each complete all as specificed and directed.

Taking down shutter of any description exe 1.00 sqm but n/exe 2.00 sqm each complete all as specificed and directed.

Taking down shutter of any description n/exe 1.00 sqm each complete all as specificed and directed.

M&L for brick work with sub class ‘B’ brick straight or curved on plan exceeding 6m mean radius in CM 1:4 complete all as specificed and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 finishing on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

M&L for non skid ceramic coloured joint free tiles 7to 8mm thick (square/ rectangular), area of each tiles exceeding 0.11 sqm but n exc 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15mm thick in cement mortar (1:6) laying floor finish complete all as specified and directed.

M&L for non skid ceramic coloured joint free tiles 7 to 8mm thick (square/ rectangular), area of each tiles exceeding 0.06 sqm but n exc 0.11 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15mm thick in cement mortar (1:6) laying floor finish complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B0 using 12.5 mm graded aggregagte as in floor to receive floor finishes etc.complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 350 x250x7/ 450x350x7 mm thick , set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 10mm thick cement plaster in cm (1:4) complete all as specified and directed.

M&L 2nd class hard wood, plain solid stright chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. NOTE Write with paint CA NO and year on back side of chowkhats and frames before execution/fixing.

S&F 2nd class hard wood 40 mm thick panelled shutter plain framed, panelled shutter (one panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated and fixed to chowkhats complete all as specified and directed. NOTE Write with paint CA NO and year on back side of shutter before execution/fixing.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc (internal sash bars) edges of framing plane, chamfered or rounded fitted and mitered beads for securing glass etc size of members as specified in SSR Part-I Section 8 clause 8.24(a) (kail) complete all as specified and directed. NOTE Write with paint CA NO and year on back side of shutter before execution/fixing.

S&F for 30 mm thick 2nd class hard wood glazed and skeleton windows/ ventilators shutters open rebated and prepared to receive glass, gauge etc , devide into square with plain chamferred or rounded, mitered and rebated sash bars any numbers , provided with stiles and rails as specified in SSR part I section 8 clause 8.24 (b). complete all as specified and directed. NOTE Write with paint CA NO and year on back side of shutters before execution/fixing.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5 mm single side prelam PVC sheet reinforced with MS square tube manufactured as per SSR Part-I specifications and drawings complete all as specified and directed. NOTE Write with paint CA NO and year on back side of frame before execution/fixing.

S&F factory made soild PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and gap isert for top rail and bottom rail paneling of plain colour PVC to sheet to be fitted in the MS frame welded / sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed. NOTE Write with paint CA NO and year on back side of shutter before execution/fixing.

S&F aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed.

S&F aluminium anodised barrel tower bolts extruded section of size 200 mm, complete all as specified and directed.

S&F aluminium anodised barrel tower bolts extruded section of size 150 mmlong , complete all as specified and directed.

S&F aluminium handle extruded febricate type anodised of size 150 mm complete all as specified and directed.

S&F for butt hinges 100mm medium weight cold rolled mild steel complete all as specified and directed.

S&F butt hinges 75 mm medium weight cold rolled mild steel complete all as specified and directed.

S&F mild steel rat tail spring including roller & roller plate complete 300 mm size complete complete all as specified and directed.

S&F 150 mm long floor door stopper of alu alloy body and tongue, anodished with hard drawn steel spring complete all as specified and directed.

M&L for fixed in repair 4mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane including hacking out old glass panes complete all as specified and directed.

M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for 4mm thick figured glass pin headed type and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane including hacking out old glass panes complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aparture 1.18 mm complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aparture 1.18mm complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C2 (using 40 mm graded aggregate ) as in sub for receiving floor finishes etc. complete all as specified and directed.

M&L for chequered cement concrete tiles 30cm x30cmx25mm thick with grey cement and pigment , set , jointed and pointed in neat cement slurry in floors laid over 15 mm thick screeed bed in CM 1:6 complete all as specified and directed.

Dismantling water storage tanks of any description,exc 250 & n.exc 500 litres capacity and removing from site complete all as specified and directed.

S&F for rotational moulded polythylene 500 litres capacity water storage tank (Cylindrical vertical with closed top), white in colour 3 layer hoisted and fixed in position including 20mm ball valve high prressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. NOTE Write with paint CA NO and year on water storage tank before execution/fixing.

S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connections of flush pipe to squat pattern closet including lime concrete bedding and all joint making good to the floor complete all as specified and directed.

S&F in repair vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (min), with grating and union for discharge pipe including flushing system, flush pipe & wate pipe) complete all as specified and directed.

S&F in repair floor stainless steel gratings , 125mm dia complete all as specified and directed.

S&F in repair PVC valveless 10 litre capacity syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed. NOTE Write with paint CA NO and year on flushing cistern before execution/fixing.

S&F in repair Vitreous china wash hand basin, Vitreous china white, flat back, size 550 x 400 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. (Including 15mm bore CP pillar tap, waste coupling and 32mm dia PVC waste pipe) complete all as specified and directed.

S&F in repairs 15mm size PVC connection with PTMT nuts of 600 mm long complete all as specified and directed.

S&F in repairs swivel shower of PTMT any colour with arm, 195 mm long with bend of 45 degree with flange (both min wt 80 gms ) complete all as specified and directed.

S&F 110 PVC (SWR) WC connector bent type complete all as specified and directed.

S&F cast iron nahani trap 75 mm dia including jointing to pipe complete all as specified and directed.

S&F in repair 15 mm bore fancy type CP bib taps cast copper alloy with crutch or butterfly nuts , handle, screwed down for iron pipe complete all as specified and directed.

S&F in repair, 15 mm bore CP stop valve cost copper alloy screwed down , high pressure with crutch or butterfly handle fancy type complete all as specified and directed.

S&F & repair, 15 mm bore CP fancy type, chromium plated with long shank and cup (concealed type) cost copper alloy screwed down, high pressure fancy type complete all as specified and directed.

Taking up or down 15mm d ia GI Tubing and connections including cleaning for refixing or removal to store completecomplete all as specified and directed.

Taking up or down 20 mm d ia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15 mm bore GI tubing medium grade galvanished with all fittings and fixed complete to walls & floors etc complete all as specified and directed.

S&F 20 mm bore GI tubing medium grade galvanished with all fittings and fixed complete to walls & floors etc complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail with brackets, 20mm dia, D type, 60 cm long between flanges complete all as specified and directed. NOTE Write with paint CA NO and year on towel rail before execution/fixing.

S&F in repair vitreous china wash down water closet pan ( pedestal pattern ) white complete including ‘P’ or ‘S’ trap , seat cover and fixing to flushing cistern, brackets, flushing pipe etc complete all as specified and directed.

S&F in repair 15 mm bore brass CP mixer for mixing hot and cold water screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed. NOTE Write with paint CA NO and year on CP mixer before execution/fixing.

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod and highdensity plastic ball screwed for 20mm dia iron pipe and fixed (minimum wieght 15mm-142gms/20mm 210gms/25mm 455gms/40mm 690gms complete all as specified and directed. NOTE Write with paint CA NO and year on ball valve before execution/fixing.

S&F in reapir pillar tap 15mm chromium plated fancy type cast cooper alloy with crutch or butter fly handle, screwed down for iron pipe and fixed complete all as specified and directed. NOTE Write with paint CA NO and year on pillar tap before execution/fixing.

S&F in reapir bib tap 15mm PTMT any colour high pressure screwed down for iron pipe and fixed ( Minimum weight 90gms) complete all as specified and directed. NOTE Write with paint CA NO and year on bib tap before execution/fixing.

S&F in repair 20 mm bore gun metal globe or gate valve with iron wheel head screwed head both for iron pipe & fixed complete all as specified and directed. NOTE Write with paint CA NO and year on gun metal globe before execution/fixing.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F in repairs 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor complete all as specified and directed. NOTE Write with paint CA NO and year on walls/floor before execution/fixing.

S&F in repairs 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor complete all as specified and directed. NOTE Write with paint CA NO and year on walls/floor before execution/fixing.

S&F 75mm PVC (SWR) bends any radius complete all as specified and directed. NOTE Write with paint CA NO and year on bends before execution/fixing.

S&F 110mm PVC (SWR) bends any radius complete all as specified and directed. NOTE Write with paint CA NO and year on bends before execution/fixing.

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed. NOTE Write with paint CA NO and year on vent cowl before execution/fixing.

S&F 75mm PVC (SWR) vent cowl complete all as specified and directed. NOTE Write with paint CA NO and year on vent cowl before execution/fixing.

dismantaling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs,weather boardings, plywood including cover fillets etc. complete all as specified and directed.

S&F for anodised aluminium snap grid of size 605 x605 mm frame work for false ceiling including straining with GI wire 4mm thick complete all as specified and directed.

S&F for 10mm thick PVC insulation panels with EPS stuck to 1mm thick plain PVC sheet suitably placed in false celing grid made of aluminium GI/MS as per specification and drawing complete all as specified and directed.

S&F for solid PVC wall panelling decorative type consisting of 5mm thick plain colour PVC pre-laminated sheet inclusive of solvent cement and and fixing at site on PVC frame/wooden frame as per specification and drawing or complete all as specified and directed.

S&F for 5mm thick PVC sheet fillets of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

S&F for 9mm thick veneered decorative plywood , grade 1 (with BWR resin) with decorative face veneers on one faces, fixed with screw to timber frame on wall and ceiling etc complete all as specified and directed.

S&F 2nd class soft wood plain fillets square rectangular or triangular in section clean sawn fixed with nails Sectional area exc 06 but not exc 13 sqcmcomplete all as specified and directed.

S&F in repairs 40mm thick , 2nd class class hardwood planks , planed one side with butt joints and fixed with nails fixed in any situation complete all as specified and directed.

M&L in repairs for weather boarding in 2nd class hardwood clean swan , plain , 20 mm thick or feather deges , 15 mm to 20 mm th and fixed with 30 mm laps joints complete all as specified and directed.

S&F in repairs timber frame in second class hard wood as in scantling etc. complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any guage, thickness including roof covering etc. complete all as specified and directed.

S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts complete all as specified and directed. NOTE Write with paint CA NO and year on mild steel sheeting before execution/fixing.

S&F 0.63mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275. complete all as specified and directed. NOTE Write with paint CA NO and year on mild steel sheeting before execution/fixing.

Dismantaling structural steel work including doors,gates,rails,grills, gratings etc complete all as specified and directed.

S&F for hand rails, half round or other stock section , nosing to steps in cluding embeding in concrete and screwing etc. wind ties for roof including securing bolts and similar work conforming to Fe 290 gde E 165 complete all as specified and directed.

S&F framed work such as grills, grating etc with guard bars,feamed guard bars, hold fasts,, railing, framed work of water tanks and similar work confirming to Fe-290 gde-E165.complete all as specified and directed.

M&L for preparing new plaster surface of walls and applying two coats of Cement base paint on walls over a coat of alkali-resistant primer complete all as specified and directed.

M&L for applying 3mm thick wall care putty over one coat of wall primer on wall and rubbing the wall care putty with emery paper to get smoothern surface including preparation new surfaces plastered or unplastered surfaces complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of priming plastered and other surfaces with alkali?resistant priming paint complete all as specified and directed.

M&L for two coats of synthetic enamel paint on new wooden surfaces over coat of pink to new surfaces including preparation of surfaces, over 10cm width or girth complete all as specified and directed.

M&L for two coats of synthetic enamel paint on new steel surfaces over coat of red-oxide primer including preparation of surfaces, over 10cm width or girth including preparing roof painting complete all as specified and directed.

M&L for preparing plastered new surface of walls and applying three coats of white wash on walls complete all as specified and directed.

M&L for preparing old plastered surface of walls and applying two coat of white wash on walls complete all as specified and directed complete all as specified and directed.

S&F in repairs plain mild steel wire, 4.0 mm dia galvanised class 3 in detached work such as mosquito nets and fixing incl straining bolts, hooks, eyes etc.complete all as specified and directed.

M/S SHEIKH FEROOZ AHMAD

M/S Hilal Builders

FIRDOUS AHMAD BABA

M/S SMA and SONS CONSTRUCTIONS

SAMEER CONSTRUCTIONS