Interior renovation

CIVIL AND INTERIOR WORKS 1.1 Charges for Carefully Breaking and Removing following items of any size, at any level, without any damage to adjacent structure/wall as directed by the Banks Engineer. Rate to quoted including carting away the debris including loading, unloading, transport, mathadi charges etc. complete. Contractor to pack the debris properly in bags and shift from site to downstairs up to debris location (assigned as Banks Location) without making any nuisance to the Bank Staff. Contractor to clean the area after the completion of work. Contractor has to remove the debris time to time and dump at municipal dumping yard as directed by Bank's Engineer. 1.1.1 Block masonary work including plaster, lintel, patli etc. complete. 1.1.2 All Types of Flooring including bedding, carpet, skirting, Dado, wash basin, platform, counters, waterproofing, coba, PCC below floor up to parent slab etc. 1.1.3 All Types of Walls of any size, at any level including patli, lintel, Brick masonary work, Partitions(frame+claddings) including suspenders of any material, plaster behind tile after removal, Gypsum sheets, Putty, Patli etc. 1.1.4 All types of Cladding at any level, Panels of any material, Wallpaper, Mouldings, Framings etc. 1.1.5 All Door Frames, Shutters, all Hardware's of any type, storage units, lintels etc. 1.1.6 All Existing Plumbing supply lines (Concealed/Exposed), Fire Fighting Lines (Concealed/Exposed), piping's, valves, fittings, fixtures etc. 1.1.7 All HVAC units, ducts, pipes, cables, drain pipes etc. of any diameter, dampers etc. as directed by the Banks engineer. 1.1.8 All Electrical Services items such as wires, Cable, Fittings such as DB Board, Sockets, Lights etc. as directed by the Banks engineer. 1.1.9 Complete Auditorium including walls, panels, framing, stage, flooring, carpet, MS structure for Steps, Stage, Ramp etc. 1.1.10 Gypsum, False ceiling with framing

1.2 Making Cutout of size in existing wall for doors as per new layout Rate to quoted including carting away the debris including loading, unloading, transport, mathadi charges etc. complete. Contractor to pack the debris properly in bags and shift from site to downstairs up to debris location (assigned as Banks Location) without making any nuisance to the Bank Staff. Contractor to clean the area after the completion of work. Contractor has to remove the debris time to time and dump at municipal dumping yard as directed by Bank's Engineer.

2..1 Half brick masonary - Providing and constructing half brick masonary walls with locally available best quality common burnt clay F.P.S. (non modular) bricks in superstructure in C.M. 1:3 (1 cement: 3 Coarse sand) including providing proper key to the adjoining structure, raking the joints, curing, cleaning, carting away debris if any outside the Bank's premises.

2.2 Brick masonary - Providing and constructing approx 225mm thick brick masonary walls with locally available best quality common burnt clay F.P.S. (non modular) bricks in superstructure in C.M. 1:4 (1 cement: 4 Coarse sand) including providing proper key to the adjoining structure, raking the joints, curing, cleaning, carting away debris if any outside the Bank's premises.

2.3 RCC Lintel - Providing and constructing RCC Lintel of approx. size 110mm x 150mm in M25 Grade concrete with Anchorage of minimum approx. 150mm on either side of the lintel in Wall/RCC. The lintel to be reinforce with nominal (4 No's of 10mm Dia with 8mm stirrups at 200mm c/c) reinforcement using Fe500, including necessary centering, supports etc. as required and as directed. The rate to be quoted including necessary reinforcement.

2.4 Cement Plaster - Providing and applying approx. 12 mm thick (average) ready mixed cement plaster in CM 1:4, complete as per manufacturer's specifications and direction at all heights and levels. rates is inclusive of providing and mixing approved fibre reinforcing material as per manufacturers specification in cement mortar etc. complete at all heights, levels and locations. The rates shall also include moulding and grooves wherever specified, scaffolding, curing, and masonry or any dissimilar materials etc. all complete as per technical specifications, drawings & as directed by the Banks Engineer. The rate shall also include providing and fixing 200mm width glass fibre mesh (145 gsm) at junctions of column/beam and walls, before plastering the junction with cement/gypsum plaster as directed. The mesh shall be nailed rigidly to the masonry with G.I. nails of suitable type at approx. 400 mm centre to centre.

2.5 Anti termite treatment - Providing and applying Post Constructional anti termite treatment by drilling holes to the walls near junction of floor and walls at distance of approx. 300mm c/c to the perimeter of the floor internally, surroundings of pipes, conduits to external wall etc. injecting the chemical and sealing the hole with white cement as per approved manufacturer’s instructions and recommendation, and installed by manufacturer’s approved agency with a guarantee of 10 years in writing on Rs. 100 /- Stamp paper for treated areas ,in a approved format, all to the satisfaction of the Banks Engineer. Contractor to appoint approved Anti- termite treatment agency. (Plan area of respective floor to be measured & paid for).

3.1 PU Coating - Providing and applying single component Polyurethane resins bonded elastomeric waterproofing liquid membrane with chemical, properties on top of well prepared parent concrete surface in three coats. One coat of self-priming of Polyurethane resines bonded elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted Polyurethane resines bonded elastomeric waterproofing liquid at a consumption rate of 500 gm per square metre per coat with brush/roller application. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect finish as per the manufacturers specifications and as directed by the Bank`s Engineer. (The coating shall be done on walls upto 600mm above the floor level and Sunken area 600mm below floor level ) Mode of Measurement - Application plain surface Area (floor and walls) should be measured and paid for.

3.2 Waterproof Cement Plaster - The top surface of the PU coating shall be applied with average 15 mm thick waterproof cement plaster in mortar 1:3 admixed with waterproof chemical compound from approved manufacturer equivalent as per manufacturer`s specification, curing, etc. complete all as directed by the Bank`s Engineer. Sunken portion shall be tested by ponding water for at least three days so as to ensure no leakages/seepages of water from the bottom of the slab.

3.3 Brickbat Coba - Providing, laying and filling sunken area of toilet block with well burnt bricks or sliced brick bats of approved size in required layers in cement mortar 1:4 (1 Cement : 4 coarse sand) mixed with approved waterproofing compound as per manufacturer's specifications including proper curing etc. complete all as directed by the Bank`s Engineer. Mode of Measurement - Actual Volume of the Brickbat should be measured and paid for.