Providing and installation of single phase 2 HP submersible motor pump set and PVC water tank with M.S. Stand at various place in ward no. 54

Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make. Use for service cable 2.5 Sq.mm.multi strand 11.5/P-165

Supplying and laying of approved Make Nylon rope 12mm thick complete with binding for support of pump and motor 11.6/P-165

Manufacturing and supply of specials made out of M.S. steel plate or HR coil conforming to IS 3589-2001 or its latest revision/amendment, 5mm to 6mm thick plate in shapes and sizes required as per site conditions including cost of steel plate & other electrical & mechanical material, including Submerged Arc welded, including cost of transportation, loading and unloading complete approved by Engineer-in-Charge. (This is applicable only when standard special are not available). 14.8/P-233

Providing, placing and installation of polyethylene water tank ISI 12701 :1996 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and the base support for tank on terrace (at all floor level). 14.39/P-245

Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed) 8 Kg/sq.cm : 25 mm dia UADD SOR VOL. - I 2nd Aug. 2021 7.1.2/P-103

Providing and fixing gun metal/ brass check (non-return) valves Class-II, female ends, tested to 21.09 kg/sq.cm. Screwed 25mm dia 6.8.3/P-90

Providing and fixing G. I. Bend 90 degree in G.I. Pipe line i/c cutting threading testing etc. complete (Old work) 25mm dia 6.27.3/P-95

Please Enable Macros to View BoQ information