REPAIR/MAINT/REPLACEMENT OF POINT WIRING, LED LIGHT FITTINGS and FIXTURES, CONNECTED ELECTRICAL ACCESSORIES, SUB MAIN WIRING, EARTHING AND CERTAIN ALLIED WORKS IN OTM ACCN OF RRC, TA BN AND ASC SUPPLY AT FATEHGARH CANTT

Taking down copper/aluminium point wiring of any description and any position (light, fan, socket or power point) complete, including fixture and fittings such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified.

Taking down Aluminium sub main wiring of any description & any position and making good disturbed surfaces to match with the existing surface roof/wall/floor complete all as specified and as directed

M & L for point wiring for one light point/holder point/fan point/exhaust fan point/bell point controlled by one switch, with 1100 volts grade PVC insulated and unsheathed 1.5 sq mm FRLS multistranded copper conductor cable, including continuous earth wire of 1.5 sq mm FRLS multistranded copper conductor PVC insulated and unsheathed cable, drawn in and including concealed/surface PVC rigid conduit or casing and capping, medium grade, complete with fittings (ISI marked), not less than 20 mm dia, and 1.6 mm thick sunken pressed steel galvanised terminal boxes with top cover and 3 mm thick plastic laminated hylam sheet for housing/fixing switches, etc., complete all as specified and directed. Note:- (i) The quoted rate shall be deemed to include cutting of chases wherever required. (ii) Chases cut for concealed wiring shall be made good with cement mortar 1:4 and finished to match the existing surface and colour, complete all as specified and directed.

All as per Item No. 03 above, but for one 6 Amp socket point with switch on same board complete all as specified and directed.

All as per Item No. 03 above, but for one 5-pin, 5 Amp switch socket combination point on an independent board complete all as specified and directed.

All as per Item No. 03 above, but for one 15 Amp, 6-pin switch socket combination point on an independent board, wired with 2.5 sq mm FRLS multistranded copper conductor PVC insulated and unsheathed cable

S&F switch piano, flush type, 5 Amp, single pole, one way complete all as specified and directed

S&F switch socket combination 2 in 1, flush type, 5 Amp 5 pin complete all as specified and directed

S&F socket outlet 2 in 1, 3 pin, 5 Amp complete all as specified and directed

S&F switch socket combination 2 in 1, 3 pin, 15 Amp flush type complete all as specified and directed