Repair and renovation of 1st and 2nd floor common toilets

Dismantling of Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs

Dismantling wall for constructing new Ventillator above 7 feet from floor for 12 rooms

Brick work in following Cement Mortar using best quality Burnt Clay Brick of size 9” x4 1/2” x 3” with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers

Earth work excavation in all soils and sub-soils and to full depth as may be directed execept in rock requiring blasting includsive of shoring shuttering, bailing out water wherever necessary and depositing the edxcavated earth with a lead of 10 mts within the compound in places shown by the departmental officers and clearing and levelling the site, etc.,

Supply and filling M-sand below flooring area

Cement concret 1:3:6 using 20mm gauge hard broken granite stone jelly for ventilator including dewatering wherever necessary and laid in layers of not more than thick, well rammed, consolidated and curing etc., complete complying with standard specification.

Cement Mortar 1:5 Levelling / Bedding Layer for Tiles.Adjust the slope accurately again towards the drain.Allow it to set partially. (Ref. Sub data)

Plastering with cm 1:3, 20mm thick

Flooring with plain ceramic Tiles of approved quality and colour size 305x305x6mm thick laid in cement mortar 1:3 20mm thick and painting with white cement including furnishing the joint and painting flush with the surface complete

Dadooing the walls with of approved quality and colour plain ceramic tiles size 300mmx450mmx8mm thick laid in cement mortar 1:2, 10mm thick and pointing with white cement using 0.4Kg/M2 includingfinishing the point and pointing flush in the file surface complete

paintings of wall above 7 seven feet

Ceiling Painting

Painting of toilet doors and frame

Providing factory-made pre-laminated FPVC (Foamed/ Formed Polyvinyl Chloride) door frame of size 105 × 40 mm with a wall thickness of 10 mm, manufactured from extruded rigid FPVC profile and mitre-jointed with 6 numbers of 5 mm long screws. The door frame shall be fixed to the wall using 80 mm long screws with PVC fasteners, 3 numbers for each vertical member. GI stiffeners in the form of ‘U’ channels of size 29 × 9 mm, 1 mm thick and 150 mm long shall be provided, 3 numbers at hinge points. Frame reinforcement shall consist of a ‘U’ GI channel of size 46 × 22 × 0.6 mm, along with a bottom tie rod of ‘U’ GI channel size 15 × 15 × 1 mm, complete as per standard specifications

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated unsheated SC.Cu, Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with TW switch box and 5A F.T switch in flush with wall with 3mm thick hylum sheet cover for makin good of the concealed portion with suitable colour for PVC concealed light point / fan point (For electronic regulator)per room 4 points.

For laying of CPVC Pipe of Dia 32 mm

For supply and laying of Waste line of dia 110mm

4’ 18W LED Light

Providing and fixing European type water closet with P or S trap, complete with double-flapped seat and seat cover fitted with brass hinges, and a 12.5 litre capacity porcelain low-level flushing tank including all necessary internal fittings

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with “P” or “S” trap conforming to BIS with crushed stone sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers.

Wash Hand Basin (With Pedestal) of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia ‘B’ Class GI Waste Pipe, 15mm dia GM Wheel Valve, 15mm dia Nylon Connection, 15mm dia Brass Nipples, 15mm CP Pillar Tap etc

CP Two Way Bib Cock with Health Faucet

Pillar Cock (for Wash Basin) – CP Brass

CP Angle Cock Tap

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification.

Supplying and fixing of SS Towel Rack 600mm long with Lower Hanger

Supplying and fixing of Brass Chromium Plated Soap Tray of size 150mm x 100mm

Supply and fixing of Exhaust Fan

Supplying and fixing position CI Nahani Trap / floor Trap of the100mm dia with best stainless steel gratings of approved brand and quality giving connection to the CI/pvc pipes etc., complete complying with standard specification.

Supplying and fixing of marble of 0.61*1.22m.,18/20mm thick in all floors for urinal partition including for labour charges for fixing and polishing etc.,

Supplying and fixing of White Glazed Porcelain Oval Shape Special Type Urinal of size 382 x 398 x 601mm