Development of tube well at Kuchana Housing Complex of Majri Area.

Amount

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

Welding by gas or electric plant including transportation of plant at site etc. complete.

Delowering of 20HP Submerssible pump and 100/80 mm dia . G.I. Pipes of deep borewell / Tubewell near patala by means of chainpully block, dismentling G.I.pipes and stacking of materials properly at site as per instraction of E/I ( provided by Contractor).

Lowering of 20HP Submerssible pump and 100/80 mm dia . G.I. Pipes of deep borewell / Tubewell near patala by means of chainpully block, dismentling G.I.pipes and stacking of materials properly at site as per instraction of E/I ( provided by Contractor).

Deployment of excavator machine ( Crane or equivalent) including cost of opertator deisel , mobil oil etc, all complete job as per instructions of E.I.(Hours will be counted form initial strat of work i.e. intial metre reading to final metre reading at site only) crane capacity 20 tonne.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 80 mm dia nominal bore

Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. 80 mm

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tall pieces if required will be paid separately) :100 mm dimmeter class II.

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tall pieces if required will be paid separately) :150 mm dimmeter class II.

Total impact of GST for the purpose of CTC

Harindra V B Singh (BID ID -1113285)

PRASHANT RAMBHAU PETKULE (BID ID -1114361)