REPAIR / COMPREHENSIVE MAINT TO FLOOR, TOILET, KITCHEN, JOINERY, CUPBOARD, TANK CLEANING, SANITARY FITTING, PLASTERING, ELECTRICAL FITTINGS AND CONNECTED ITEMS IN OFFICERS MD ACCN UNDER AGE B/R-II OF GE (EAST) AGRA

Amount

Taking down chowkats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 sqm each complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frame) n exc 1.5 Sqm each complete all as specified and directed.

Taking down shutter exc 1 Sqm and not exc 2.00 Sqm each complete all as specified and directed.

S&F tubular steel framed work as in chowkhat / frame for single door frame of size 100 x 50 mm & thickness of tubular section should be exc 2.5 mm and n exc 4 mm for doors with one or more rebates including necessary fixing lugs, lock, strike plate,hold fast etc complete all as specified and directed.

S&F tubular steel framed work as in chowkhat / frame for double door frame of size 130 x 65 mm & thickness of tubular section should be exc 2.5 mm and n exc 4 mm for doors with one or more rebates including necessary fixing lugs, lock, strike plate,hold fast etc complete all as specified and directed.

S&F Factory made flush shutter 35 mm thick solid core construction with block board core and plywood face panels commercial type prelaminated both sides complete all as specified & directed.

S & F 35 mm thick, factory made , llnd class hard wood (Sal) glazed and skeleton shutter open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, charmfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part l, section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.

S & F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F of factory made soild PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube , supplying & fixing in opening as per specification and drawing complete all as specified & directed.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

Providing & fixing of windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy-duty stain less steel pivot hinges shall be provided per shutter. The windows should be panelled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self-expanding, screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work including of all taxes etc complete all as specified and directed.

Providing and Fixing of ventilator made of pre-painted steel (Base steel as per IS 513 of 0.58 mm thick “D” Quality galvanized as per IS 277 with Zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 48x50mm, centre mullion should be of 48x50mm, section for shutter should be of 52x 25mm and rebate for Glazed shutter with a 20mm provision for Guard bars/Grills. The sections are to be cut to length metre joined with corner bracket. Centre mullion is to be fixed with mullion cap. Handle, stay, 2 nos. of Stainless Steel heavy duty Pivot hinges shall be provided per shutter the windows fitted with 4mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including fixed panel beading section should be of 12x12mm. Outer frame and mullions to have 10mm Square guard bars with 6” (152.4mm) pitch etc complete all as specified and directed.

S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified & directed.

S&F Aluminium alloy, anodised, 250 mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F Mild steel butt hinge medium weight cold rolled of size 100 mm long and fixed with screw/ welding complete all as specified and directed.

S&F 100 mm long stainless steel hinges type B-12 and fixed with screw/ welding complete all as specified and directed.

S&F 150 mm long aluminium anodized handle cast type complete all as specified and directed.

M&L 100 mm long aluminium anodized handle cast type complete all as specified and directed.

S&F in repair Floor door stopper 150 mm long of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor complete all specified and directed.

S & F in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F drapery (curtain) rod 25mm dia Stainless steel, side cups including fixing arrangement with drilling holes in walls brackets etc complete approved quality and colour complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) from wooden or metal frames, glazed with putty or fixed with beads etc complete all as specified & as directed.

S&F 3 mm thick sheet glass ordinary quantity and glazing with oil putty in square not exceeding 0.5 Sqm in each panel complete all as specified and directed.

S&F 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

M&L for Two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer including preparation of new or previously untreated surfaces of wood of any description not otherwise described over 10 cm in width or girth complete all as specified and directed.

M&L for one coat of synthetic enamel paint (Ordinary tint) including preparation of old surfaces of wood of any description not otherwise described over 10 cm in width or girth complete all as specified and directed.

M&L for one coats of synthetic enamel paint (Ordinary tint) including preparation of old surfaces of steel of any description not otherwise described over 10cm in width or girth complete all as specified and directed.

M&L for Two coats of synthetic enamel paint (Ordinary tint) over a coat of red oxide primer including preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10 cm in width or girth complete all as specified and directed.

M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding of hold fast etc including disturbed surfase of existing pogition complete all as specified and directed.

S & F in repair 18 mm thick with min density 600 kg / cum Lead Free PVC Celuka ply of single side rigid laminate of approved colour and other side plain white colour fixed with SS screws and solvent cement / adhesive to make cupboard / kitchen cabinet frame or shutter including beading etc complete all as specified and directed.

Supply and fix for brass 2 levers mortice lock, vertical type, size 100mm complete all as specified and as directed.

S&F Stainless Steel hydraulic Hinge of required size for cupboard / cabinet shutter etc complete all as specified and directed.

S& F in continuous (Piaano) hinges MS Bright finish width of flap 30 mm when open complete all as specified and directed.

S&F 100 mm long brass handles, cast type, polished bright fixed complete all as specified and directed.

S&F 75 mm long brass handles, cast type, polished bright fixed complete all as specified and directed.

S&F PVC magnet catcher suitable for CB / Cabinet shutter complete all as specified and directed.

Demolition of brick work or stone masonry including all quoins, arches, pillars etc built in CM complete all as specified & directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified & directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick built in CM 1:4 complete all as specified & directed.

Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15 mm thick cement plaster in CM 1:4 on brick work / concrete surfaces with WPC and finishing the surfaces even and smooth without using extra cement etc complete all as specified and directed. (WPC Paid separately)

Supply only Water Proofing Compound complete all as specified and directed.

M&L for rendering 10 mm thick cement plaster in CM 1:3 on brick work / concrete surfaces of ceiling, chhajja etc finishing the surfaces even and smooth without using extra cement etc complete all as specified and directed.

M&L for rendering 12 mm thick cement plaster in CM 1:6 on brick work / concrete surfaces of walls & finishing the surfaces even and smooth without using extra cement etc complete all as specified and directed.

Removing or dismantling of damage / cracked/ concrete /loose concrete / plaster of ceiling/ wall/ chajja/ facia to expose the sound and hard concrete using a suitable mechanical device or by hammer and chisels etc complete all as specified & directed.

M & L for applying 25 mm thick ( average ) repair mortar ready to use single component polymer modified repair mortar for repair of RCC members likes beams, columns, chajja and facia/Ceiling, mortar having good compressive strength and shrinkage resistance etc complete all as specified & directed.

M & L for applying bonding agent for bonding old to new concrete surface likes chajja/ beams/ celings/ columns/ facia etc by high performance modified Styrene- Butadiene Rubber ( SBR ) base binder . Applying of binder is as 10 sqm/ per lit etc complete all as specified & directed.

M&L for single component polymer modified mortar repair mortar upto 40 mm thickness in a single coat and max thickness of 50 mm for repair of RCC members likes beams, columns, chajja and facia/Ceiling, mortar having good compressive strength and shrinkage resistance etc complete all as specified & directed.

Material & labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash to match the existing as required, complete all as specified & directed.

M&L for preparation of newly plastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

M&L for two coats of OBD over a coat of average 2 mm thick putty on newly plastered surfaces complete all as specified and directed.

M & L for two coat of cement base paint over a coat of primer on new plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for Preparing old plastered surfaces of walls by brooming down or by steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and applying one coats of oil bound distamper over 2 mm thick putty complete all as specified and directed.

M&L for Preparing old plastered surfaces of walls by brooming down or by steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and applying one coats of oil bound distemper complete all as specified and directed.

Material and Labour for preparation of old plastered surfaces of ceiling etc by brooming down by steel wire brushing, scrapping down smoke Soot, moulds, moss and trading oil and greasy spots etc and apply one coat of white wash complete as specified and directed.

Material and Labour for preparation of old plastered surfaces of wall etc by brooming down by steel wire brushing, scrapping down smoke Soot, moulds, moss and trading oil and greasy spots etc and apply one coat of white wash complete as specified and directed.

M&L for one coat of cement base paint over the wall including preparation of old surfaces etc complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.

Dismantling of stone slab of any description or thickness in floor, step, riser etc laid bedded and pointed complete all as specified and directed.

M&L for non skid ceramic coloured tiles (Premium quality) (squre/ rectangular) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over 15 mm thick screed bed in CM 1:6 etc complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450x250x7mm thick fixed on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement over 10 mm thick 1:4 CM plaster to match complete all as specified and directed.

M&L for Virified Ceramic tiles, light shade 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm in floors etc white cement and coloured pigment to match the tiles over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No. 63.00 but in skirting over 10 mm thick rendering in CM 1:4 etc complete all as specified and directed.

M & L for 18-20 mm thick black granite of length and width as required including fixing, necessary cutting and support of angle at both corner and middle filled with pcc 1:2:4 or cement mortor 1:3 over 15 mm thick screed bed in CM 1:6 etc complete all as specified & directed.

M&L for 20-25 mm thick machine cut kota stone slab flooring over 20 mm thick cement screed bed in CM 1:6 , lade and jointed with grey cement slurry mixed with pigment to match the shade of stone slab including cutting, grinding, rubbing and polishing complete all as specified & directed.

M&L for 20-25 mm thick machine cut kota stone slab as in skirting, riser of step, dado and pillar etc over 15 mm thick cement plaster in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of stone slab including cutting, grinding, rubbing and polishing complete all as specified & directed.

S&F in repairs Vitreous China wash hand basin counter type white of size 550x440 mm including 32 mm CP waste coupling and pvc waste pipe 800 mm long fixed over black granite etc complete all as specified and directed.

Supply and fix in repairs CP Central hole basin mixture screwed for 15 mm dia pipes including PVC connection etc complete all as specified and directed.

S&F in repairs vitreous China squatting pan (Orissa pattern), white, of size 580x440mm white, with CI 'P' or 'S' trap, integral foot rests including flush pipe, trap, lime concrete bedding including taking out of old lime concrete bedding, unserviceable connections etc connecting up new and making good disturb portion complete all as specified and directed.

S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with CI 'P' or 'S' trap including connection to trap and cistern and flush pipe (excl flusingh cistern ) and making good to disturbed surface of floor all fixed complete all as specified and directed.

S & F in repair of plastic wc seat cover and mild steel chromium plated or aluminised hinging device as etc complete all as specified and directed.

S & F in repairs Flushing Health Faucet for pedestal pattern WC incl .flexible pipe and brass chromium plated nuts and bolts and water pipe of size 1150 mm long between dia & fixed completed all as specified and directed.

S & F in repair flushing jet for pedestal pattern WC incl. flexible pipe and Brass Chromium Plated nuts and bolts and water pipe of size 1150 mm long between dia & fixed complete all as specified and directed.

S&F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets & taking out of old unserviceable connections etc, connecting up new and making good disturb portion complete all as specified and directed.

S&F in repairs 15mm bore CP stop cock / angle cock cast copper alloy fancy type, screwed down high pressure, screwed for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15 mm bore stop cock, (Concealed type) cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket or PPR pipe etc making good disturbed portion complete all as specified and directed.

S&F in repair bib taps long body cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket or PPR pipe etc making good disturbed portion complete all as specified and directed.

S & F in repairs Brass CP mixer for mixing hot & cold water srewed down for iron pipe and fixed for 15 mm dia pipe complete all as specified and directed.

Supply & fixing in repair CP tubular towel rail, 60 cm long, 20mm bore, chromium plated complete all as specified & directed.

S & F in repairs Brass chromium plated shower rose 125 mm size, long body ( Arm size should not be less than 450 mm ) with or without swivel joints, any size, including fixing to steel pipe or union etc complete all as specified and directed.

S & F in repair CI floor trap, plain with grating including jointing with solvent cement (Diameter of outlet 75mm), jointing to waste pipe and fixed in cement concrete 1:2: 4 (type B1) mixed with pedilite water proofing liquid @ 200ml in 50 kg cement, including taking out of old unserviceable connections etc, connecting up new and making good disturb portion complete all as specified and directed.

Supply & fixing in repairs C.P. grating 100/125 mm dia with or without centre hole etc all as reqd at site complete all as specified and directed.

S&F in repairs CP Soap dish 100mm dia fixed with cp screws etc complete all as specified and directed.

S & F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long etc complete all as specified and directed.

S&F in repair PVC Cabinet mirror (Single Door) etc complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings in roof coverings complete all as specified and directed.

S&F of Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F of Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

Dismantling of wrought iron of mild steel work of any description not otherwise poivided complete all as specified and directed.

S&F of Roof trusses (framed), trussed, purlins, Rafter, Post, crane gantries, cleat, rails and fastenings and heavy bracket framing (Beam, tee, angle, wind tie, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (Gde-E- 250) quality complete all as specified and directed.

Demolition of cement concrete of any description and any position etc complete all as specified and directed.

M&L for cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L 25 mm thick PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in sub base of floor to receive tiles complete all as specified and directed.

M&L for Applying the non shrink high mechanical strength properties epoxy based mortar @ 5kg / RM on all corner joints of wall to prevent the capillary formation from wall to roof area; by three component system comprising of base, hardener and quartz filler having ER Base and Hardener with Quartz filler etc complete all as specified & directed.

M&L for machine pressed coloured rubber moulded chequered tiles 30 cm x 30 cm x 20 to 22 mm thick set, jointed & pointed in neat cement slurry in floors over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for PCC 1:2:4 Type B1 ( using 20 mm graded stone aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in eight, copings, kneelers, apex stones bed plates, kerbs chajjas , water troughs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating, fixing of chain link fencing etcall as directed incl necessary formwork etc complete all as specified and directed.

S&F in repair stainless steel plate rack of size 31"x30"x10" mm fixed to wall complete all as specified and as directed.

S&F in repair kitchen sink with draining board made of stainless steel 1mm thick with sink coupling & waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x160 mm complete all as specified and directed.

S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valve, nipple etc complete all as specified in SSR Part I including dismantling of storage tank.

Taking up or down 15 mm bore steel tubing including fittings and connections, including cleaning for Refixing or removal to store complete all as specified and directed.

S&F 15 mm bore Galvanized Steel tubes, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S& F 20 mm outer dia of CPVC pipes SDR 11 & plain CPVC pipes SDR 11 fitting on wall,floor and ceiling etc complete all as specified and directed.

S&F 20 mm outer dia of CPVC brass elbow fixing to CPVC pipes on any location and position etc complete all as specified and directed.

S& F 20 mm outer dia of CPVC brass Tee fixing to CPVC pipes on any location and position etc complete all as specified and directed.

Taking up or down 20 mm bore steel tubing/ PPR pipe including fitting and connections, including cleaning for Refixing or removal to store complete all as specified and directed.

S&F 20 mm bore Galvanized Steel tubes, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repairs 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair 20 mm dia PVC float Valves high pressure, with polythene float and fly nut complete,screwed for Iron pipe or brass ferrule complete all as specified and directed.

Taking down Rain water pipe of any size or pattern ( CI / PVC / AC pipe ) including all fittings etc complete all as specified and directed.

S&F 100 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints fixed to walls including making good disturb portion to match the existing complete all as specified and directed.

S&F 100 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints laid in floor or in trenches including making good disturbe portion to match the existing complete all as specified and directed.

S&F 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors and cement joint including making good disturb portion to match the existing complete all as specified and directed.

S&F 100 mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors and cement joint including making good disturb portion to match the existing complete all as specified and directed.

S&F 75 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints fixed to walls including making good disturbe portion to match the existing complete all as specified and directed.

S&F 75 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints laid in floors or in trenches including making good disturb portion to match the existing complete all as specified and directed.

S&F 75 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors and jointed with cement joint including making good disturb portion to match the existing complete all as specified and directed.

S&F 75 mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors and cement joint including making good disturb portion to match the existing complete all as specified and directed.

S&F in clamps out of 50 mm by 5 mm flat iron fixed with suitable bolt / screws securing ends of stays to wall or roof for PVC (SWR) / CI Pipe for 100 mm bore pipe complete all as specified & directed.

S&F in clamps out of 50 mm by 5 mm flat iron fixed with suitable bolt / screws securing ends of stays to wall or roof for PVC (SWR) / CI Pipe for 75 mm bore pipe complete all as specified & directed.

S & F in 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

S&F 110 mm PVC (SWR) junction single,(Single T) equal or unequal complete all as specified and directed.

S&F in repair PVC waste Pipe of 32 / 40 mm bore heavy duty type suitable for WHB / Sinks etc complete all as specified and directed.

S&F in repair SS double layer nhani trap of required size (125*125 mm) for collecting sullage etc complete all as specified & directed.

Supply and fixing in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp, complete all as specified and directed.

Supply and fixing in repair MCB TPN 40-63 Amp rating 415V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing in repair MCB SP 6 to 32 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing in repair MCB SPN 40-63 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fix Flame Retardant (FR) PVC casing caping of Size 25 mm x 16 mm, Ivory Colour, Unplasticised formulation for prolong storage or usage, double lock, ISI Marked as per IS 14927, Highly durability, Resistance to oil and grease, complete all as specified and directed.

Supply and fix Flame Retardant (FR) PVC casing caping of Size 20 mm x 12 mm, Ivory Colour, Unplasticised formulation for prolong storage or usage, double lock, ISI Marked as per IS 14927, Highly durability, Resistance to oil and grease complete all as specified and directed.

Supply and fix PP corgulated flexible conduit of 16mm dia size complete all as specified and directed.

S&F in repair LED batten Tube Light surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption <20W (4 feet 20 W) luminaire lumen >2000 lm, system efficiency of >120 lumens /W, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 450C, driver efficency>85%, power factor>0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and seafty extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification complete all as specified and directed.

S&F in repair LED batten Tube Light surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption <10W (2 feet 10 W) luminaire lumen >1000 lm, system efficiency of >120 lumens /W, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 450C, driver efficency>85%, power factor>0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and seafty extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification complete all as specified and directed.

Supply and fix in repair post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

Supply and fixing in replacement LED building security light fitting 35 Watt 230 V AC out-door type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, fixed to pole or wall of building with and including suitable Bracket made out of 25 mm dia GI light grade pipe, 1.00 m long bent to shape by cutting & welding as required & directed and fixed with two Nos of FI clamps 40x3 mm to be tightened with suitable size of bolts, nut and washers including connecting the fitting to electric source with & including twin twisted copper flexible wire of size 0.75 sqmm three core with suitable size flexible PVC conduit including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed.

Supply and fixing switch piano flush button single pole one way 5 amps 240 volts with polycarbonate body complete all as specified and directed.

Supply and fixing Switch piano flush button single pole one way 15 amps 230 Volts with polycarbonate body complete all as specified and directed.

Supply and fixing switch piano flush button single pole Two way 5 amps 240 volts with polycarbonate body complete all as specified and directed.

Supply and fixing socket 5 amps 3 pin flush type, 240 volts. with polycarbonate body complete all as specified and directed.

Supply and fixing socket out let, 6 pin 5 and 15 amps multipurpose 2 in 1 flush type, 230 volts with polycarbonate body complete all as specified and directed.

S & F stepped type electronic fan regulator socket type ISI marked on the existing phenolic laminated sheet etc. as required complete all as specified and directed.

Supply and fix in repair switch socket combination 6/16 Amp, 240 volt with Box complete all as specified and directed.

Supply and fix in repair switch socket combination 6 Amp, 240 volt with Box complete all as specified and directed.

Supply and fix in repair modular switch piano single pole, one way 6 Amps 1 module complete all as specified and directed.

Supply and fix in repair modular switch piano flush type 16 Amps single pole one way, one module complete all as specified and directed.

Supply and fix in repair modular socket outlet 2/3 pin 6 Amps combined 2 module complete all as specified and directed.

Supply and fix in repair modular socket multipurpose 3 pin 6/16 Amps combined 2 module complete all as specified and directed.

Supply and fix in repair ceiling rose , polycarbonate, isolated body surface Bakelite 65mm dia three terminals complete all as specified and directed.

S&F in replacement of PVC insulated copper conductor single core flexible cable of size 1.5 sqmm and its connection complete all as specified and directed.

S&F in replacement of PVC insulated copper conductor single core flexible cable of size 2.5 sqmm and its connection complete all as specified and directed.

S&F in replacement of PVC insulated copper conductor single core flexible cable of size 6 sqmm and its connection complete all as specified and directed.

Supply and fix in repair metal clad socket industrial 2pin & earth plug top 20A, 230V complete suitable for AC Box complete all as specified and directed.

Supply and fix in repair metal clad plug top industrial 2 pin & earth plug socket 20A, 230V complete all as specified and directed.

Krishna Constructions (BID ID -3130292)

M/S ADITYA ENTERPRISES (BID ID -3135209)

3Krishna Enterprises (BID ID -3126599)

Balaji Associate (BID ID -3125705)

N.K. ENTERPRISES (BID ID -3127093)

M/S RADHEY GOVIND ENTERPRISES (BID ID -3126630)

SahaDevSingh Constructions (BID ID -3126423)

M/s Kok Singh Sisodia (BID ID -3126458)