Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹42.4 LAccepted-AOC | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹44.2 L+₹32,629 (0.74%)Rejected-AOC | L-2 | Rejected-AOC Other than L-1 | |
| 3 | L-3₹49.4 L+₹5.5 L (12.5%)Rejected-AOC | L-3 | Rejected-AOC Other than L-1 |
| Sl No | Description | Qty | Unit | CHADHA ENGINEERS L2 | MS R G ENTERPRISES L1 | M/s Om parkash L3 |
|---|---|---|---|---|---|---|
| 1.00 | Dismantling posts or struts (Wood, steel or RCC) any section including taking out embedded portion in concrete, brick work, masonry etc, and making good disturbed ground complete all as specified and as directed by Engineer-in-Charge. | 1,400 | RM | 15 ₹21,000 | 6 ₹8,400 Lowest | 15 ₹21,000 |
| 2.00 | Site clearance in soft/ loose soil including cutting of bushes & small shurbs etc. complete all as specified and as directed by Engineer-in-Charge. | 350 | Sqm | 40 ₹14,000 | 30 ₹10,500 | 10 ₹3,500 Lowest |
| 3.00 | Excavation in soft/loose soil as in post holes (or similar holes) each not exceeding 0.5 cum, getting out and removing surplus soil to a distance not exceeding 50 meters complete all as specified and as directed by Engineer-in-Charge. | 600 | Each | 150 ₹90,000 | 68 ₹40,800 | 60 ₹36,000 Lowest |
| 4.00 | M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed by Engineer-in-charge. | 74.9 | Cum | 1,650 ₹1,23,585 | 1,390 ₹1,04,111 Lowest | 2,400 ₹1,79,760 |
| 5.00 | Supply only Mild steel round bars 10 mm dia and over, cut to length, bent to shape required fixed as line wire in chain link fencing along the length as required complete all as specified and as directed by Engineer-in-Charge.
Note:- Fixing shall be measured and paid separately here-in-after in serial item No. 14.00. | 2,500 | Kg | 75 ₹1,87,500 | 65 ₹1,62,500 Lowest | 80 ₹2,00,000 |
| 6.00 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including bedding in concrete and screwing etc. wind ties for roof including securing bolt posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc,; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or revetting, etc and similar work conforming to Fe-290 Gde E-165 etc. and similar work complete all as specified and directed by Engineer-in-Charge. | 9,400 | Kg | 85 ₹7,99,000 | 72 ₹6,76,800 Lowest | 87 ₹8,17,800 |
| 7.00 | S&F mild steel screws, bolts etc, machine made with hexagonal or square heads at one end and screwed on the other, or screwed both ends each screwed and to be fitted with washers and one hexagonal or square nuts exceeding 5 cm long but not exceeding 10 cm long, diameter of shank 5 to 10 mm complete all as specified and as directed by Engineer-in-charge. | 150 | Kg | 125 ₹18,750 Lowest | 210 ₹31,500 | 160 ₹24,000 |
| 8.00 | M&L for preparation of new steel surfaces not otherwise described exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-charge. | 430 | Sqm | 25 ₹10,750 Lowest | 29 ₹12,470 | 40 ₹17,200 |
| 9.00 | Dismantling wrought iron or mild steel work of any description not other wise described complete all as specified and as directed by Engineer-in-charge. | 7.5 | Quintal | 100 ₹750 Lowest | 500 ₹3,750 | 300 ₹2,250 |
| 10.00 | Material and Labour for Framed work such as grills, gratings, railing etc. with ends of bars shouldered and/ or rivetted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed by the Engineer-in-Charge. | 500 | Kg | 90 ₹45,000 Lowest | 100 ₹50,000 | 90 ₹45,000 Lowest |
Tender Value
₹65 L
EMD Value
₹1.2 L
Closing Date
30 Sept 2025, 6:00 pmClosed
CWE Chandimandir
HQ CWE Chandimandir, PIN-134107
CWE/CHM-82/2025-26 REPAIR TO COMPOUND WALL, FENCING, DRAIN, PATHS, CULVERTS ETC IN OTM ACCN UNDER AGE B/R-II OF GE CHANDIMANDIR AT CHANDIMANDIR MIL STN
2025_MES_727843_1
CWE/CHM-82/2025-26
Open Tender
Civil Works
Item Rate
180 days
GE Chandimandir
Class C, Cate a(i)
9 documents required · 9 mandatory
₹1,000
GE Chandimandir
₹1.2 L
21 Nov 2025
26 Aug 2025
7 Oct 2025
26 Aug 2025
30 Sept 2025
16 Sept 2025
26 Aug 2025 - 2 Sept 2025
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .