Package 02/2020-21 Various electrification works at KUMS Hanumangarh

Amount

Part-A (Supply, Installation & Commissioning of IP CC TV Camera System at KUMS - Hanumangarh)

SITC of IP 67, IK 10, full HD 1920*1080, 20-60 fps, 4 MP, ONVIF profile S/profile G, True day/night, Bullet camera having wide dynamic range up to 120 dB 2.7-12mm fixed lens with 16X digital zoom, S/N ratio 50-60 dB, Provision of Auto/manual white balance, gain control & on board micro SD card support, IPv6 ready, Supports all standard protocols, operating temperature range of 20 degree celcius to 50 degree celcius. The work includes complete installation, outdoor weather proof camera enclosure, mounting brackets, clamps etc. required for successful operation of system of make BOSCH/ Honeywell (HBW4PER2) / Sony.

SITC of network video recorder of 32 channel HD recording, user friendly operation with features to view record, playback, live view and remotely control the system simultaneously with 4 SATA interface to support 04 TB HDD, 19PoE, VGA output, HDMI, multiscreen display of 1/4/8/16 windows, Ethernet LAN with RJ-45 connector of make, Samsung/Sony/ Honeywell.

SITC of IP65 outdoor high gain wireless radio link of minimum 2.4-5.0 GHZ, upto 300 Mbps speed, 16 dBi dual polarized, compliant with 802.11a, 802.11b/g/n, Multi operation support gate way/VVIP S/Client/Access Point/ Repeater. The antenna should have ESD protection of 15 KV, lighting protection 4 KV, integrated firewall, 64/128 bit WEP encryption, powered by passive POE injector/12 V DC supply. The work includes supply & fixing of weather proof MS box, S&F of 4 port switch, power distribution unit, connecting cables from camera to switch & antenna, complete work including making connection of power cable etc. as required for successful transmission of video data to control room of make WIS- NETWORK/ALCON.

SITC of high performance 4 TB surveillance Hard Disc Drive to be fitted in existing NVR of make Western Digital (WD)/Seagate.

SITC of base terminal station complete with high gain antennas for 360 degree receiption of wireless surveillance camera system signals of the same OEM as CPE, to be mounted over 12 mtr tripod shaped MS tubular self supporting mast (price included), complete with fixing & suitable bolting support at roof along with all accessories like stay wirless, data/power cable upto control room complete in all respect.

Supply, installation & commissioning of Smar LFD signage display of screen size : 55'' (138 cm diagonal), in built two speakers, LED backlit type, wall/ table mount type of following specifications with making connectivity of devices with surveillance system with the help of signal/ 2 mtr. HDMI cables as required along with all accessories : SONY/LG/SAMSUN/ BARCO/ NEC/ PANASONIC Make)

Resolution : 1920*1080 (16:9) FULL HD

Brightness : minimum 450 nit

Scree type : Non touch

Duty Cycle : 24*7

Viewing angle : 178:178

Power : AC 100-240v 50 HZ

All in all comprehensive maintenance of wireless CCTV system including replacement of components, consumables, servicing etc. complete in all respect after defect liability period of the equipment to keep the wire less CCTV working through out the year.

Part-B (Providing and fixing of Public Announce and Evacuation system in Mandi Yard at KUMS - Hanumangarh)

SITC of 120W Mixer amplifier As per specifications mentioned below

Amplifier output Power: Rated output: 120W Maximum output: 180W

Mounting : 19" Rack mount

Frequency response (Line): 100 Hz to 10 kHz (+1/‑3 dB @ ‑10 dB ref. rated output)

Frequency response (Mic.) : 70 Hz to 20 kHz (+1/‑3 dB @ ‑10 dB ref. rated output)

Dynamic range : 93dB

Distortion: <1% @ rated output power, 1 kHz

S/N (flat at max volume) : >60 dB (mic.); >70 dB (line)

Bass Control : Max. + 8 dB

Treble Control : Max. + 8 dB

Operating Humidity (RH%) 90%

Input / Mic, Line

Front Panel Control indicators:

ON / OFF Switch

Power ON LED

Master volume knob

Four volume knobs for microphone inputs

Volume knob for background music

Knob for treble level

Knob for bass level

Headphone socket

Amplifier should have Separate music Input with Volume control

Amplifier should have priority output Channel for addressing areas where only priority announcements are required

Amplifier should have priority Input Channel which can take priority over all other microphone and music inputs, incase of any urgent and priority announcement

Amplifier should have built in FAN for cooling of amplifier component

Acoustic noise level of fan: <48 dB SPL @ 1 m

Operating temperature: 0 ºC to +55 ºC

Relativehumidity: <95%

Certifications: EN 60065, EN 55103‑1, EN 55103‑2

Amplifier should be Ahuja, Bosch, AUTOMATION make

SITC of IP65 outdoor high gain wireless radio link of minimum 2.4-5.0 GHZ, upto 300 Mbps speed, 16 dBi dual polarized, compliant with 802.11a, 802.11b/g/n, Multi operation support gate way/VVIP S/Client/Access Point/ Repeater. The antenna should have ESD protection of 15 KV, lighting protection 4 KV, integrated firewall, 64/128 bit WEP encryption, powered by passive POE injector/12 V DC supply. The work includes supply & fixing of weather proof MS box, S&F of 4 port switch, power distribution unit, connecting cables from camera to switch & antenna, complete work including making connection of power cable etc. as required for successful transmission of video data to control room of make WIS- NETWORK/ALCON OR any reputated brand as approved by Engineer in charge satisfying above specification.

Supply, installation, testing and comissioning of 230W Booster amplifier as per tender specifications (Amplifier should be the same make as PA controller)

The amplifiers are protected against overload and short circuits. A temperature-controlled fan ensures high reliability at high output power and low acoustic noise at lower power output. Additionally, all booster amplifiers have an overheat protection circuit that switches off the power stage if the internal temperature reaches a critical limit due to poor ventilation or overload.

Balanced input and a loop-through connector shall be available for easy connection of multiple booster amplifiers to increase the available output power. The power amplifier shall obtain two balanced inputs with priority control, each with a loop-through facility. This allows for easy and automatic switching between e.g. a local music source and a priority announcement from a remote system.

An additional 100V line input is provided to connect the booster amplifiers to a 100V loudspeaker line, for additional output power e.g. on remote locations. Sensitivity or level control is located on the rear of the unit to avoid accidental setting change. A VU-meter with LED-bar shows the output level.

The amplifiers not only provide 70V and 100V outputs for constant voltage loudspeaker systems, a low impedance output for 8 Ohm loudspeaker loads is available for different usage.

PERFORMANCE

Frequency response 50 Hz – 20 kHz (+1/-3 dB,

INPUTS

Line input/balanced

Sensitivity 1 V

Impedance 20 kOhm

100V input (Screw, unbalanced)

Sensitivity 100 V

OUTPUTS

Line loop through output t/ balanced)

Nominal level 1 V

Impedance direct connection to line input

Line loop through output 1,2 (3-pin XLR, balanced)

Impedance direct connection to line input

Loudspeaker outputs (Screw, floating)

ENVIRONMENTAL CONDITIONS

Operating temperature range 0 to +55˚C

Relative humidity <95%

Amplifier should be Ahuja, Bosch, BEHRINGER make

SITC of 30W outdoor IP 65 Horn type speaker with driver unit as per specifications mentioned below

Rated Power: 40W , Maximum Power: 45Watt

Type of Speaeker: outdoor Horn type

frequency range @ -10dB : 280Hz to 9.5kHz

Opening angle (at 1 kHz/4 kHz, -6dB): 70°/40°

Sound pressure level at rated power/1 W: 125 dB/123/95 dB (SPL)

Degree of Protection: IP 65 protect against Water and dust

Rated/Operating Voltage : 100V

Speaker should be able to withstand acoustical Feedback two times their rated power for short durations.

Material of construction: aluminum with ABS Plastic

Operating temperature: 0°C to 55°C.

Humidity: 0 to 95 % non condensing

Certification: IEC 268-5, CE, UL 94 V0, EN 60065

Amplifier should be Ahuja, Bosch, AUTOMATION make

Supply of wireless/Cordless hand held microphone unit : The unit must incorporate a receiver 2 unit & a wireless/cordless hand held microphone. The microphone should be dynamic, super cardioids type with RF output power of 15mW (max) & 98-100 dB dynamic range with internal dipole antenna. The microphone must have on/off switch with red LED & having AA type (UM-3) alkaline cells with life of 15-20 hrs. The unit must have coverage area more than 100 Mtr. The receiver must have dual squelch & operate at quartz crystal locked VHF high band frequency & with frequency response range 20 Hz-20 K Hz. The unit must have telescopic antenna & audio output -56 dBV/Pa (1.6 mV) power on/off switch audio output vol. control, squelch level control and having red LED for power on, yellow LED for RF reception & green LED for audio signals the etc. S/N ratio should not be less than 100dB etc. as required.

SITC of base terminal station complete with high gain antennas for 360 degree receiption of wireless surveillance camera system signals of the same OEM as CPE, to be mounted over 12 mtr tripod shaped MS tubular self supporting mast (price included), complete with fixing & suitable bolting support at roof along with all accessories like stay wirless, data/power cable upto control room complete in all respect.

All in all comprehensive maintenance of wireless PA system including replacement of components, consumables, servicing etc. complete in all respect after defect liability period of the equipment to keep the wire less PA system working through out the year.

Bidder Name

Amount

GANPATI COMMUNICATION SERVICES(GSTN-08AMAPG7177L1ZP)