SPECIAL REPAIR TO CARRIAPPA PUMP HOUSE AND MH PUMP HOUSE ALONGWITH WATER SUPPLY LINE IN CONNECTED AREA AT AEC TRG COLLEGE AND CENTRE PACHMARHI.

Amount

Taking up or down of old unserviceable 50mm bore steel tubing and connections including removal from site complete all as specified and as directed.

Relaying of old GI pipe line 50mm bore steel tubing and connections after cleaning of joints and fittting as taking out against item No 1.

Supply & fix 50mm bore medium grade galvanised steel water tubes with all fittings such as bends, elbows, tees, short pieces, union etc and fixed complete to walls and ceilings or laid in floors/ trenches complete all as specified & directed. Note:- Excavation and earth work if required, same shall be measured and separately under respective items of BOQ. Make:TATA/JINDAL/SWASTIK

S&F in repair sluice valve ISI Marked (IS 14846-2000), Class PN-1.6, both ends flanged with CI body, stainless steel spindle, chucknut and iron wheel etc including provision of new nuts, bolts, washers and gasket including testing and taking out the old unserviceabe valve in the same location complete all as specified and directed for following size :- Make:KIRLOSKAR/ZOLOTO/UPADYAY

100mm bore

80mm bore

Supply and fix in repairs, gun-metal, globe or gate valves, ISI marked, class 150 with iron wheel head, screwed both ends for iron pipe and fixed, for 50mm bore dia of pipe complete all as specified ncluding testing and taking out the old unserviceabe valve in the same location. Make:KIRLOSKAR/ZOLOTO/Leader

Taking up or down 80/100 mm bore cast iron water mains (including all fittings) with spigot and socket ends and lead joints from trenches/ floors including burning out joints and recovering lead and removal from site complete all as directed. Note:- Excavation and earth work wherever required shall be measured and separately under respective items of BOQ.

M&L for 80 mm bore DI pipes of make as approved by AGE(I) with spigot and socket ends suitable for tyton joints, centrifugally cast, class K-9, in any length coforming to IS: 8329 (2000) as per latest amendments, laid in trenches with & including making rubber gasket joints (Tyton joint) and testing on completion complete all as specified and directed. Note:- Excavation and earth work shall be measured and separately under respective items of BOQ. Make:TATA/ELECTROSTEEL/JINDAL

Supply and fixing of CI/DI fittings i.e. bends (any type, radius and angle), tapers any type (straight, bend increasing, decreasing or double socket etc), T- pieces single branch, 'Y' junciton double branch, cross (all sockets or socket and spigot), collars, caps and plugs etc suitable for & upto 150mm bore pipes complete all as specified and directed.

M & L for Excavation for taking out/laying cable/GI pipe/DI pipe /CI pipe in trenches in any type of soil not exc 1.5 m wide and not exceding 1.5 m deep for GI/CI/DI pipe complete all as specified and directed by Engineer-in-Charge

Returning filling in including spreading, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing surplus soil to distance not exceeding 50 M and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for valve chamber of size 1200mm x 1200mm x 900mm (internal dimention) with brick masonty valve chamber, 100mm thich PCC (1:4:8) type D2 as in foundation, 200mm thick brick wall built in CM (1:6), 50mm thich coping of PCC (1:3:6) type C1, 15mm thick plastering in CM (1:4) to all internal and exposed surface including necessary excavation and earth work in soft/loose soil, MS sheet cover 6mm thickness along with angle iron frame of size 40 x 40 x 5mm with locking arrangement with necessary fixing materials like hinges, nut bolts etc (valve chamber cover shall be opened in two valves) and painting to MS cover with two coats of synthetic enamel paint over one coat of red oxide primer etc with and including dismantling and taking out existing damaged/ rusted valve pit cover of any size from valve pit chamber complete including demolish the old one all as specified and directed.

Cutting of existing CI pipes of 100/150 mm bore and reducing to required length in position for insertion of new tees, collar, branches etc including all necessary excavation & earth work and bailing out of water if required complete all as specified and directed. Note:- CI specials (fittings) shall be measured and paid for seperately under respective items of BOQ as "M&L" complete while run lead joint required for execution of this item is deemed to be included in the quoted rate.

Supply & fix 65 mm bore medium grade galvanised steel water tubes with all fittings such as bends, elbows, tees, short pieces, union etc and fixed complete to walls and ceilings or laid in floors/ trenches complete all as specified & directed. Note:- Excavation and earth work if required, same shall be measured and separately under respective items of BOQ.

Supply & fix 65 mm pipe flange complete all as specified & directed.

Supply , install, testing and commissioning of horizontal submersible pump with electric motor of cap 30 HP , 3 phase,440 votls, 50 Hzs and capacity of pumping water 1600 Ltrs per minure to a head 48 mtr and 500 Ltrs per minure to a head 78 mtr with all necessary accessiries and fittings including connecting to delivery pipes 65 mm and fixing on base of underground sump by making platform of suitable size using PCC 1:3:6 ,20 mm graded stone aggregate and nuts,bolts and washer as per requirement of pump as per instruction and directed by Engr -in -Charge at comprising of the following complete all as specified and as directed Note : Rate of PCC foundation and arrangement of drainining out the water from sump is deemed to be included in the quoted rate. Make:Kirloskar model OWPH30.2 or equivt in CROMPTON

Submersible cable, PVC insulated, multistranded copper conductor, 1100 volts grade, 3 core flate of size 16 Sqmm. Make: Havells,RR kabel,Polycab

S&F in repair Automatic star delta starter in sheet metal enclosure, suitable for submersible / centrifugal pump set with relay, contactor, auxilary contactor suitable to run on 440 volts, 50 Hz, AC supply complete all as specified and directed. Make : L&T (ML 2.5 ) or or equivalent make as specified.

Supply and fixing/ laying of 32 mm bore dia GI pipe light grade in trenches/ under roads/ along pole/ wall for cable protection including all necessary fittings & clamps made out of 25x3mm flat iron for clamping the protrction pipe at 2 M distance etc as required complete all as specified and directed. Make:TATA/JINDAL/SWASTIK

S & F non return valve 65 mm dia screwed Female Ends to IS 554 / BS 21 / ISO 7, screwed in Bonnet, Integral Seat,permits flow in one direction and closes automatically if the flow reverses,metal Disc is mushroom shaped with spherical seating surface,meant for Horizontal Lines only,disc is guided in Body as well as in Bonnet complete all as specified

S & F non return valve 50 mm dia screwed Female Ends to IS 554 / BS 21 / ISO 7, screwed in Bonnet, Integral Seat,permits flow in one direction and closes automatically if the flow reverses,metal Disc is mushroom shaped with spherical seating surface,meant for Horizontal Lines only,disc is guided in Body as well as in Bonnet complete all as specified

Roughening surfaces of old concretexfloor by picking, sweeping clean and washing down with water to remove dust, etc.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match imcluding Screed bed or bedding layer of mortar 15 mm thick CM 1:4 for laying floor finishescomplete all as specified and directed.

M&L for brick work with modular size full brick subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for 15mm thick rendering on surfaces of brick work or stone walling in CM 1:6 finishing the surface fair & even complete all as spfd and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground

Excavation in post holes in soft / loose soil each not exc 0.5 cum and getting gout returning filling in and ramming earth and removing surplus soil to a distance not exc 50 mtr and making good surface.

S&F in repairs galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc as directed. (Each line wire to be measured separetaly)

S&F 4mm dia galvanised steel wire chain link fencing(wire mess size100x100mm)incl line wire (stiffness 10mm MS round bar/tor bar) 4 Nos horrizontly all as specified and directed

S&F joist, chanel, MS pipe, angle or tee sections as in post and structs in fencing incl cutting of to shape as directed drilling holes knotching for wire etc, flat iron fillete (for securing wire mesh/chain-link fencing etc) incl all necessary drilling, riveting,nut bolt etc and similar work confirming to Gde-Fe-410-0 or Fe-310-0.

M&L two coats of synthetic enamel paint over one coat of red oxide primer on steel surfaces exc 10cm width or girth including preparation of steel surfaces, complete all as spfd and directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doo0rs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M & L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in thrust block to support the pipe at corner and junctions, copings, benching, bed plates, bond stones, kerbs or mud stops etc and the like including weathering slightly rounded/ chamfered angles with & including necessary use and waste of form work for fair faces of concrete, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in flooring on existing sub base surfaces of OH tank,pump houses finished cement concrete surface even and smooth without using extra cement including necessary form work and concrete (PCC) to be cast in alternate bays complete all as specified and directed. complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L for moorum filling floors or pavings laid in layers n exc 15 cm thick , spread, levelled, and blind earth and rammed in cluding watering all as spesified and directed by Engr -In- Charge.

SUNIL ENTERPRISE

Dev Enterprises

ROYAL CONSTRUCTION

GHASI RAM SAHU