Repair to footpath, hard standing, drain, boundary wall and misc B/R works at AF Stn Mamaura.

Amount

Demolition of cement concrete as in ground floors & pavings not exc. 15 cm thickness (below or above G.L.) complete all as directed.

Demolition of brickwork built in cement mortar complete all as specified and as directed.

Demolition of cement concrete reinforced of any description or in any position not otherwise specifically provided for complete all as directed.

Dismantling stone slabs or tiles or PCC tiles of any description or thickness, laid dry in floors, aprons etc complete all as specified and as directed.

M&L for PCC 1:4:8 type -D2 (using 40 mm graded stone aggregate )as in foundation filling / mass concrete, complete all as specified and directed.

M&L for Brick work with sub class B' bricks straight or curved on plan exc 6m mean radious, built in CM 1:6 complete all as specified and directed.

All as per above item No 06, but except bricks -ditto-

S&F for precast cement concrete louvres and jallies, 40mm thick (measured solid), including all mouldings but excluding frames made of PCC 1:2:4 type B-0 ( using 12.5mm graded stone aggregate) and set in cement mortar 1:4 complete all as specified and as directed.

M & L 15 mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:6 finished even and smooth complete all as specified and directed.

Form work to soffit of suspended slab such as roof slab ,floor slab landing and similar work n exc 200mm thick (horizontally or sloping) complete all as specified and directed.

M&L RCC 1:2:4 type B-1 ( using 20mm graded stone aggregate ) slab supported on walls , beams, columns in slope ,roof, landing ,balconies,canopy,deck slabs & in shelves & the like complete all as specified and directed.

M&L for providing precast reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate ) as in landings, cover slabs, chullah hoods, chajjas, water troughs, shelves and similar articles with plain faces and setting in cement mortar 1:4 complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified.

M&L for 75mm thick PCC 1:4:8 of type D-2 (using 40mm graded stone agrregate) as in sub base of floors etc complete all as specified and directed.

S&F for machine pressed precast concrete interlocking paver block coloured rubber moulded any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L PCC 1:2:4 type B-1, ( using 20mm graded stone aggregate) as in coping, side kerbs, mud stops etc including necessary formwork complete all as specified and directed.

M&LPCC 1:2:4 type B-1, ( using 20mm graded stone aggregate) as in surface channels and drains etc complete all as specified and directed.

M&L for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and as directed.

Add or deduct for each 25mm girth or part thereof over or under 30cm -ditto-

M&L 100mm thick Cement concrete 1:2:4 type B-1( using 20 mm graded stone aggregate) including necessary formwork and laid in alternate panel in floor,pavings etc and finishing cement concrete surface even & smooth complete all as specified & directed

S&F glass door with 12mm thick toughened glass of Make- Modi Guard/Saint Gobain etc complete all as specified and as directed.

Taking down chowkats or frames exc. 1.5 but n.exc 4 sqm each with shutters (W/o taking off shutters from the frame) and removal to store complete all as as directed.

Dismantling boarding, any description, fixed in any position fixed with screws complete all as specified and as directed.

Dismantling timber fillets in framed work under 40sqcm in section complete all as specified and as directed.

S&F for factory made UPVC frame of size 60mmX58mm of white or any other colour for casement/sliding window/door/ fixed glass window, made of extruded profiles, making arrangement of fixing of glass with Neoprene/EPDM rubber gasket complete all as specified and as directed

S&F floor spring single cylinder made of 2mm thick MS sheet box (230mmX100mmX48mm) and stainless steel cover plate (Gde 304) with and including top and bottom patch of stainless steel cover suitable for 10 to 12mm thick fully glass doors complete all as specified and as directed. Make :- OZONE Cat No. OFS-5800SD, OPF-2SD, OPF-3SD /CROSSLEY Cat No - CSH-2.

S&F for stainless steel (Gde 304) glass door handle of 25mm dia and 450mm long H type handle (inside and outside both) fixing with screws all as specified and as directed. Make :- OZONE Cat No OGH-55 /CROSSLEY

M&L for forming12 mm thick expansion joint filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound grade A for 100mm thick slab complete all as Specified & directed.

M&L for preparation of new (previously untreated) plastered surfaces of walls and applying two coats of cement based paint on walls, complete all as specified and directed

M R CONSTRUCTION

Spectrum Enterprises

VINAYAKA (INDIA) MULTIFARIOUS SERVICES PVT LTD

BAJAJ CONSTRUCTION

A K CONSTRUCTIONS

m/s pal associates

M/S ALOK SRIVASTAVA