Construction of Anganwadi Building in Perayampattu Panchayat

Amount

Construction of Anganwadi building

Earth work excavation and depositing on bank with initial lead and lift in hard gravelly soil as per SS 20B for narrow foundation

Cement concrete 1:4:8 mix using 40mm size LSS metal including cost and conveyance of all materials to site, labour charges for laying consolidation, curing etc., complete.

Supplying and filling of good earth filling locally available earth transported from the outside including consolidation, leveling specified in layers of not exceeding 200 mm thick., etc. complete.

Brick work in cm 1:5 mix using best country bricks including cost, conveyance of all materials to site, labour charges etc., complete

First floor

Supplying and erection centering for sides and soffits including supoorts and struttion up to 3.29m height for plane surface in all floors with all cross bracings using mild steel of size 90CMx60Cm and 10 gauge stiffened, welded with mild steel angles of size 25mm x 25mm x3 for boarding laid over siver oak ( Country wood) just of size 10 Cm x6.5cm dia spaced about 92 cm Centre to center and supported by casurmas propels of 10Cm To 13Cm dia spaced at 75Cm Center etc Complete complying with standard speicification and as directed

lintel , beam roof

Providing and laying in position, M-20 Grade in accordance with IS:456-2000, using 20mm and down grade hard broken granite stone jelly for all RCC Items of works with minimum cement content of 350kg/m3 and maximum water cement ratio of 0.50, including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS:9130 to accelerate, rated setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m) 7730kg. of 20mm machine crushed stone jelly and with about (3.3cum) 5156 kg. of 10-12mm machine crused stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with Mechanical vibrators, finishing, curing, etc.,and providing fixtures like fan clamps in the RCC Floor / roof slabs wherever necessary without claiming extra, etc., Complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No Separate payment will be made by the Department for the excess usage of materials).

Ground floor

Steel - Fe 500 D: Supply, fabrication and placing of reinforcement steel of high yield strength ribbed bars of various diameters and grade conforming to IS 1786 for reinforced concrete work. The work includes recoiling, straightening, cutting, bending, fabricating, and placing in position, at all levels including lead and lift, according to drawings, specifications etc. complete and supply & use of 18G black annealed binding wire double fold to tie the bars in position and providing precast cement/ PVC cover blocks for main reinforcement to ensure specified cover and complete., including all labor charges etc as directed by departmental officers.

Brick jelly lime concrete using 20mm brick jelly with slacked lime in the ratio of 32:12.5 including cost and conveyance of all materials to site and all labour charges for mixing , laying ,and finishing etc complete for 10 cum

Terrace Floor finshed with one course of pressed tiles of size 20x20x2cm with cement mortar 1:3 mix and pointed with the same oiled mortar including cost and conveyance of all materials to site and all labour charges etc complete for 10 sqm

Providing and applying 10 mm thick Cement plaster in Cement mortar 1:3 ( One part of Cement and Three parts of Sand ), to finishing the exposed surfaces of R.C.C. items of works such as Roof (or) floor slabs, beams, and Sun shades etc.to correct plane and level including scaffolding, hacking of surface, chiselling the undulated surface wherever necessary and curing etc., all materials and labour complete in all respects including all lead, lift and descent and as directed by the Enineer in charge. This rate includes the cost of providing Cement Mortar beadings for sun shades, steps,landing slabs, elevation etc. complete complying with standard specifications.

Providing & applying 12 mm thick cement plaster in CM 1:5 (1 part of cement: 5 parts of sand) to walls internally in single coat at all levels to correct line and level including chicken wire mesh at all joints of brick and concrete surfaces with minimum overlap of 150 mm in all directions, scaffolding, rounding off or chambering of corners, offsets, fin/ bands, projections, etc. and cleaning of surface, raking out joints, roughening of surface, chiseling the undulated surface wherever necessary and curing, etc., all materials and labor complete in all respects including all lead, lift and descent and as directed.

Cement concrete 1:2:4 mix using 20mm size LSS metal including cost and conveyance of all materials to site, labour charges for laying consolidation, curing etc., complete.

Paving the Floor with scratch proof vertified tiles of size 600x600x8mm laid in CM 1;2,10mm thick and pointing with white cement 0.40kg per sqm mixed with colouring pigment to siut the colour of the tiles including cost and conveyance of all materials to site and all labour charges etc complete

Floor finishing with Cement based Hydraulic pressed anti-skid tiles of size 20cmx20cm including costand conveyance of all materials to site and all labour charges etc complete

Floor finishing with Cement based CERAMIC tiles of size 20cmx20cm including costand conveyance of all materials to site and all labour charges etc complete

Dadooing of walls with colour glazed tiles of size 300x200x6 mm of best quality including cost and conveyance of all materials to site and all labour charges etc complete.

Towards the cost of steel door of size 1.00 mx2.10 m including all charges etc.

Towards the cost of steel door of size 0.75mx2.10 m including all charges etc.

Towards the cost of steel door of size 1.10mx2.10 m including all charges etc.

Towards the cost of steel ventilator of size 0.9x0.45 m including all charges etc.

Towards the cost of steel Windows of size 1.20 x 1.30m including all charges etc.

Towards cost and fixing of RCC Jolly of size 0.90x0.45m including cost and conveyance and labour for fixing etc

Supplying and painting the walls with one coat of wall primer and two coats of Exterior emulsion (apex or equivalent) as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work).

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting two coats of new steel doors and windows paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supplying and fixing cuddapah slab for cupboard shelf

Cost & Supply For Baby W.C including cost and conveyance of all materials to work site and labor charges etc complete.

Cost & Supply For E. W.C including cost and conveyance of all materials to work site and labor charges etc complete.

Cost & Supply For Urinal trap including cost and conveyance of all materials to work site and labor charges etc complete.

Cost & Supply For Wash basin including cost and conveyance of all materials to work site and labor charges etc complete.

Provision for Rain water pipe 3m

Provision for Name board

Electrification

Wiring with 2X2.50 sq.m PVC unshenthed SC alu. Cable with 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W switch box with pointing of suitable colour with continuous earth wire connection of 14 SWG TC wire for concealed PVC light point (SD 21)

Supply and fixing of C.F.L. 11Watts light and fittings etc.,SD80

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp SD110

Supply and fixing of WT bulk head fitting with guard suitable for 11W CFL lamp with CFL Bulk head Fitting SD83

TUBE Light Fittings ( SD 88 )

DPI swtich of 500 V (SD142)

G I Pipe (SD69)

Wiring with 2X2.5 sq.m PVC unshenthed SC alu. Cable of 650 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories of 150x 100x 63m size T.W switch for 15A pin non interlocking plug including pin top with painting suitable colour with continuous earth wire connection of 14 SWG TC wire for concealed PVC Plug point (SD 27)

Supply and fixing of service wier

Supply and fixing of s.s hand rails

Water supply

500 liter tank

25 mm upvc pipe

25 mm upvc Elbow

25 mm upvc Bend

25 mm upvc Tee

110 mm pvc pipe 6 ksc

110 mm pvc Tee

110 mm pvc Elbow

15mm cp tap

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Vinayaga Construction