Supply and Fabrication of SHED and Providing Paver Block Footpath Infront of Community Hall at Keeranatham H/O Keeranatham

Amount

1.Name of the work : Supply and Fabrication of SHED and Providing Paver Block Footpath Infront of Community Hall at Keeranatham H/O Keeranatham Panchayat. SS Kulam union in Coimbatore District under MLACD -2023-2024-Package No. TN 01-SSKM-04

Earth work excavation for cutting in all soils and sub soil to full depth and refilling with excavated earth in layers of not more than 15cm thick well ramed and consolidated and depositing the surplus earth in all place shown by Departmental officer with initial lead and lift, etc including all the site complete complying with standrad specifications as per SS 20B

Cement concrete 1:4:8 mix using 40mm HG metal including cost and conveyance of all materials to site and all labour for watering, wherever necessary and laid in layers not more than 15 cm thick compacting etc., complet complying with standard specification and as directed..

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Plain Cement Concrete 1:3:6 (one cement, two M.Sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .

Providing and Laying of Interlocking Concrete (Surface Textured) Block Pavements having thickness 60mm and compacted over a thin bedding M.Sand layer of 25 mm thickness and joints shall be filled by fine M.Sand of specified grading as per table 1500.6 of Specification of Rural roads-2014 and Technical specification clause 1504.

METAL AND IRON ITEMS Mild steel plates or sheets , Mild Steel Angles and Square and Rectangular Site

Supply and Fabrication of Galvalume Sheet including all Cost and Conveyance and all Labour charges to Complete.

Supplying and painting two coats new iron work such as steel doors ventilators, window bars etc., (WITHOUT PRIMER)

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

V R JAYANTHI