SPECIAL REPAIR FOR REPLACEMENT OF LT UG CABLES AND REPLACEMENT OF UNSERVICEABLE LED LIGHT FITTINGS AT INS HAMLA AND REPAIR/REPLACEMENT OF DETERIORATED EARTHING AND CONNECTED ITEMS FOR MES INSTALLATION AND CERTAIN BLDG AT MO MBI GHATKOPAR

Amount

Taking down carefully copper/alumunium point wiring for light, fan, bell, socket or power complete including fittings such as switches, ceiling roses pendents regulators, sockets and tube light fittings etc, removing materials from site or for reuse refixing and making good distrubed surface of wall, floors etc all as specified and directed.

Taking down carefully copper/alumunium Sub main wiring from the position and removing materials from site or for reuse refixing and making good distrubed surface of wall, floors etc all as specified and directed.

M & L for point wiring complete with proper colour coding using 1100 volts grade, 1.5 Sqmm, PVC insulated, FRLS,unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked, drawn Completely in and including PVC casing caping fixed on the surfaces of Walls/RCC slab/ ceiling/columns/beams etc with all accessories, fittings, also inclduifng 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts mutli-stranded copper conductor green colour as continous earth wire connected to common earth dolly all as specified and diretced for one light point/fan point controlled by one one way switch, complete all as specified and directed.

M&L for point wiring complete with 1.5 sqmm PVC insulated unsheathed 1100 volts grade FRLS cable stranded copper conductor single core partly concealed in wall through Existing/Laying new PVC conduit(as directed by Engr-in-charge) and concealed accessories and partly surface on ceiling, beams and cloumns through casing caping and accessories of size 20/25mm complete with 1.5 sqmm PVC insulated copper conductor earth wire and connected to earth dolly for one light/Fan point controlled by one switch complete

Supply and fix in replacement of switch modular type 6 amp single pole one way 230 V all as specified and directed.

Supply and fix in replacement of switch modular type 16 amp single pole one way 230 V all as specified and directed.

Supply and fix in replacement of ceiling rose surface backelite three terminal complete all as specified and directed.

Supply & fixing Modular white cover plate with frame 8 Module complete all as specified and directed.

Supply & fixing Modular white cover plate with frame 6 Module complete all as specified and directed.

Supply & fixing Modular white cover plate with frame 3/4 Module complete all as specified and directed.

Supply & fixing modular Plastic Surface PVC box 6/8 Module complete all as specified and directed.

Supply & fixing modular Plastic Surface PVC box 3/4 Module complete all as specified and directed.

M&L in repairs for sub main wiring two run of size 2.5 sqmm PVC insulated electric power FRLS cable (heavy duty) 1100 volts grade with stranded copper conductor with 2.5 sqmm PVC insulated copper conductor earth wire in PVC casing caping of suitable size (three run of 2.5 sqmm cable and one run of PVC conduit / casing caping will be measured as one unit) including dismantling of existing unserviceable submain wiring all as specified and directed.

M&L in repairs for sub main wiring two run of size 4 sqmm PVC insulated electric power FRLS cable (heavy duty) 1100 volts grade with stranded copper conductor with 4.0 sqmm PVC insulated copper conductor earth wire in casing caping of suitable size (three run of 4 sqmm cable and one run of PVC conduit / casing caping will be measured as one unit) including dismantling of existing unserviceable submain wiring complete all as specified and directed.

Supply and fixing in replacement surface mounting slim/Box type LED flat panel 2' x 2' LEDs 36/40 watts Inlcuding Replacement of Unserviceable LED Drivers and Multistrip LEDs Suitable to Fitted on False ceiling by cutting to complete all as specified and directed.Make :Jaquar/Havells/Philips. NOTE : Item must have 02 Years of onsite replacement warranty.

Supply and fixing in replacement integrated sleek extruded LED channel with acrylic cover 20 watt with white light including with driver and prewired with complete including 0.5 sqmm 3 core flexible wire connecting from ceiling rose including over voltage protection for min 4hrs, surge protection 4KV complete all as specified and difected. Make :Jaquar Cat No BTI-WHT-LGLZ01X020XC / Havells/Philips. NOTE : Item must have 02 Years of onsite replacement warranty.

Supply and fixing in replacement integrated sleek extruded LED channel with acrylic cover 10 watt with white light including with driver and prewired complete including 0.5 sqmm 3 core flexible wire connecting from ceiling rose including over voltage protection for min 4hrs, surge protection 4KV complete all as specified and difected. Make :Jaquar cat no BTI-WHT-LGLZ01X010XC/Havells /Philips. NOTE : Item must have 02 Years of onsite replacement warranty.

Supply and fixing in replacement of LED lamp with acrylic cover 14 watt Pin or Threaded CW/WW colour type complete all as specified and difected. Make :Philips Ace Bright LED Bulb Product no. 929003674901 /Havells/Jaquar/Bajaj.

Supply and fixing in replacement round / Square shape 12 watt 230 volts AC recessed type down light with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. Make: Jaquar Cat No IDL-WHT-LARP01R012XW/ Philips / Crompton / Bajaj NOTE : Item must have 02 Years of onsite replacement warranty.

Supply and fixing in replacement round/Square shape 15/18 watt 230 volts AC recessed type down light with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. Make: Jaquar cat no IDL-WHT-LARP01R018XW/ Philips/ Bajaj NOTE : Item must have 02 Years of onsite replacement warranty.

Supply and fixing in replacement 100 watt 230 volts AC High bay light with high efficiency having minimum 120 lumen/watt complete with drivers, suitable connection for hanging on ceiling with including connecting up with three core flexible copper conductor cable of suitable size complete.Make: Jaquar Cat Part No ILO-BLK-LHBLDUR100XC /Philips/Bajaj Note: Contractor must have arrange ladder for light installation.

M & L for earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6 cm thick buried directly in ground vertically at a depth not less than 2.25 m below normal ground level with top level of earth plate at depth not less than 1.5 m below normal ground level surrounded form all sides by 15 cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connection by using GI strip 32 mm x 6 mm by means of bolts, nuts, check nuts and washers of galvanized iron upto test point and protected by GI pipe light grade 40 mm bore up to 7.5 Mtr connected to a main switch board or main control board and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, 80 mm thick pre-cast RCC 1:2:4, type B-1 cover reinforced with hard drawn steel wire fabric weighing not less than 4 Kg/Sqm in lieu of CI cover, PCC 1:3:6 type C2 pit / chamber including all necessary excavation and earth work, disposal of surplus soil to a distance not exceeding 50 m all as specified and as shown in Electrical Plate No 3 of MES Schedule Part – I of 2009. Note: Test of earthing results submitted to GE specified and directed by Engr-in-Charge.

S&F air termination, single pointed aluminium rod, 12mm dia 300mm long at any position / location including all necessary scaffolding / staging required, etc. complete all as specified and directed by the Engineer-in-charge

Supply & fix aluminium strip 25 mm x 3 mm with saddles and fixing screws etc for roof conductors and down conductors along the wall/roof complete.

Supply and fix GI strip 32mm x 6mm buried in ground complete all as specified and directed by the Engineer-in-charge.

Supply anf fix Test point terminal block made of gun metal or phosphrous bronze size 75*75*25mm drilled and screwed including 3 Nos 8 mm dia 25mm long hex head screw complete all as specified and directed by the Engineer-in-charge.

M&L for pre-cast cement concreate block of size 0.15M x0.15M x0.15M for fixing of Aluminium strip type C1 1:3:6 using 20mm graded stone aggregate in cement motor 1:4, including fixing the coccrete block on terrace for fixing of lightning conductor complete all as specified and directed by the Engineer-in-charge Note -i) The quoted rae is deemed to inclusive of T & P/scaffolding/staging etc for executing the work in buildings of height up to 30 meter.

M&L for providing factory made RCC precast cement concrete grade M-30 cover slab of size 450mmx900mmx75mm thick set in cement mortar 1:6 including reinforcement of 8mm dia deformed bars@ 150mm c/c ways etc complete all as specified and directed by the Engineer-in-charge.

M&L for providing factory made RCC precast cement concrete grade M-30 cover slab of size 600mmx900mmx75mm thick set in cement mortar 1:6 including reinforcement of 8mm dia deformed bars@ 150mm c/c ways etc complete all as specified and directed by the Engineer-in-charge.

Excavation in trenches n.exc 1.5 m wide and n. exc 1.5 m in depth and getting out in soft/loose soil for removing/laying of cables complete all as specified and as directed by Engineer-in-charge.

Returning, filling in including spreading , leveling , watering and well ramming in layers n.exc 25 cm with soil complete all as specified and as directed by the Engineer-in- Charge.

Removing excavated material to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for dry fine sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm thick after laying, stretching and testing the cable all as direted. Note : [Punned thickness 18 cm shall be measured & paid]

Supply and laying DWC (Double Wall Corrugate) HDPE pipes of pressure rating 6 Kg/Cm sq of size 40 mm outer dia 32 mm inner dia minimum IS: 16205(Part 24) : 2018 laid in trenches complete all as specified and directed.

Supply and laying DWC (Double Wall Corrugate) HDPE pipes of pressure rating 6 Kg/Cm sq of size 50 mm outer dia 38 mm inner dia minimum IS: 16205(Part 24) : 2018 laid in trenches complete all as specified and directed.

Supply and laying un-reinforced pre cast concrete cable cover, class LV type 1 with flat size 250mm x 150mm x 40mm

Supply and laying GI pipe 50 mm, light grade for the protection of the cable passing through road crossing, etc.

Supply and laying GI pipe 80 mm, light grade for the protection of the cable passing through road crossing, etc.

Supply and laying in repairs cable LT XLPE insulated and screened PVC bedded, galvanised steel strip armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade complete all as specified and directed by Engineer in charge for the following sizes including taking down existing u/s LT cable. Note It include cost of removing the old cable and fixing the new cable in panel/ required location with all lugs/cable clamp saddling if required e.t.c as directed by Engg-in- charge:- (i) 95 Sqmm 3.5 Core

All as per descrption of item No 40 but for 70 sqmm 3.5 core. Complete all as specified and directed by Engg-in- charge

All as per descrption of item No 40 but for 50 Sqmm 3.5 Core. Complete all as specified and directed by Engg-in- charge

All as per descrption of item No 40 but for 35 Sqmm 3.5 Core. Complete all as specified and directed by Engg-in- charge

All as per descrption of item No 40 but for25 Sqmm 3.5 Core. Complete all as specified and directed by Engg-in- charge

All as per descrption of item No 40 but for 16 Sqmm 4 Core. Complete all as specified and directed by Engg-in- charge

All as per descrption of item No 40 but for 10 sqmm 2 core. Complete all as specified and directed by Engg-in- charge

Supply and fix in repairs LT cable route indicator made out of cast iron 10cm dia duly engraved with letters 'LT CABLE 1100 volts' fixed in 20mm x 20mm equal angle 60cm long including provision of PCC block of 20cm length x 20cm width x 30 cm depth complete all as specified and directed.

M & L for Premix Ready mix road repair patching Compound for repairs to damage road any depth,including sweeping free from dust and mud or water,scouring sunken surfaces in roads,paths etc,cutting around edges to at least 25 mm in depth,filling in screened and graded road metal,watering and well ramming etc complete all as specified and directed.(For Road Cutting Repair)

Material and labour for PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) for filling the disturbed road opening for cable crossing include levelling with road surface and smooth finishing complete all as specified and directed. ( for Road Cutting Repair)

Deduct Credit for Demolished/ Dismantled material Rs. (-) 2,51,910.00 (Minus) as listed in Schedule of Credit. Note 1:- Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' Note 2:- The tenderer must keep in mind when quoting rates against items out in multiple store house having height 4 mts to 7 mts. Necessary scaffolding and saftey measures required during execution of work are including in this items.

Radha Engineering Services (BID ID -3467627)

NOEL ENGINEERS (BID ID -3457563)

sapana enterprises (BID ID -3462611)

AIRCON SYSTEMS (BID ID -3467706)

M/s Mukesh Engineers (BID ID -3462478)

Vishal Builders (BID ID -3462312)

DHARMESH ENTERPRISES (BID ID -3462598)

R J ENTERPRISES (BID ID -3462247)