Repair of Rotary Central Verge, Footpath and Drain including clearance of the drain in Gandhi Nagar area for beautification of City roads

Amount

Demolishing cement concrete in 1:3:6 or richer mix manually / by mechanical means including disposal of material within 50 Mtrs lead.

Earthwork in all kinds of soil excavation by manual means in trenches for foundations, drains, pipes, cable etc. (not exceeding 1.5 in width) and for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan, depth upto 1.5 Mtr including disposal of excavated earth upto 1 Mtr from cutting edge, disposed earth is to be levelled and neatly dressed.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead for thickness of tiles 10 mm to 25 mm.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate) 40mm nominal size crushed.

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) excluding cost of centering and shuttering. All work upto plinth level.

Providing and laying in position cement concrete of specified grade 1:3:6 grade (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size) excluding the cost of centering and shuttering. All work upto plinth level.

Chequerred precast cement concrete tiles 22mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand)

Ordinary cement without any pigment (Old Tiles).

Ordinary cement without any pigment (New Tiles).

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer- In- Charge (length of finished kerb edging shall be measured for payment). Precast C.C kerb stone shall be approved by Engineer-In-Charge.

Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thin able cement primer of approved brand and manufacture on wall surface.

Painting with synthetic enamel paint of approved brand and manufacture to give and even shade two or more coats on new work.

Slip clearance in soils; mixed with moorumiKankar/shingle/boulders; disposal lead upto 50 Mtr and lift upto 1.5 Mtr.

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases of columns.

Carriage of material by Mechanical Transport including loading / unloading and stacking at site complete.

Stone aggregate / Sand for an avg. lead of 10 Kms.

Disposal of excavated earth /mulba for an avg. lead of 10 Kms.