PAINTING TO RUNWAY CENTRE LINE, SIDE STRIPS, LINKS AND RUBBER REMOVAL INCLUDING CONNECTED WORKS IN AIRFIELD TECH AREA AT AFS GWALIOR

Amount

M&L for scrapping of existing water base paint/ reflective paint on rigid/flexible pavement of runway by manually with wire brush, steel scraper or mechanically and brooming down the surface including removal of debris outside the runway etc complete all as specified and directed.

M&L for two coat of water base paint for painting lines, dashes, arrows, letters etc on bituminous/concrete surfaces exceeding 10cm width with Machine (Air/ Airless spray applications). Colour of Water base paint will be white, yellow, black & red as per the requirement in Air field complete all as specified and directed . Paint shall be conforming to IS-164 of Berger "Guideline RM 164" , Asian paints "Apcotrak IS" or equivalent as approved by GE. Specification of the machine is as under :- Graco line lazer 5900 with 2 guns, Graco line lazer 200HS, Wagner company or equivalent with same specifications.

Description all as per item No 2 here-in-before but, two coats of water base paint including primer on new surface complete all as specified and directed.

Description all as per item No 2 here-in-before but, including Black Border complete all as specified and directed.

Description all as per item no 2 here-in-before but two coat of retro reflective paint to obtain WFT 300 microns including drop on glass beads @ 350 grams per Sqm (TTB 1325 type III and having refractive index 1.9) . Paint shall be of Berger "Guideline Airfield WBR paint/Sigmark WB Airfield Paint" , Asian paints "Apcotrak WBR" or equivalent as approved by GE.

Description all as per item No 5 here-in-before but, including Black Border complete all as specified and directed.

M&L one coat of synthetic enamel paint on brick/stone/concrete/AC sheet/ plastered/ wooden surface etc of any description not otherwise described, over 10 cm width or girth including preparation of old /previously treated surface complete all as specified and directed.

Description all as per item No 7 here-in-before but on steel or iron surfaces complete all as specified and directed.

M&L cleaning down the old treated surface of under/over shoot area of runway to remove dust, dirt by wire brushes and brooming down the surface, cleaning with water and applying evenly 02 (two) coat of cement base paint, complete all as specified and directed.

M&L for removal of paint deposits on runway and Airfield pavement surface designated by the Engineers/users mechanically using high pressure water jet technology including vaccumising all debris/FOD removal in the process complete so that the total paint deposits should be removed and Airfield pavement surface texture and surface condition remain intact complete all as specified and directed by Engineer-in-Charge. Note: The machine should be equipped with a high performance regulator , to adjust/control the dwell time ( the duration of water jet remaining over a unit of area during operation ) and pressure of water jet, so as to prevent any damage ot runway surface. The surface is damage by the removal of Paint by the contractor shall be repaired at his own cost as per direction by the Engr-in-charge.

M&L for removal of rubber deposition including use of equipments for removal on Air field pavements designated by the Engineers/users using high water pressure/Ultra high water pressure vaccumising all debris/FOD removal in the precess including friction test should be carried out before and after rubber removal complete as specified and directed by Engineer-in-Charge. Note: The surface is damage by the removal of Rubber deposit the contractor has been repair at own cost as per direction by the Engr-in-charge

R.B. ENTERPRISES (BID ID -3311836)

vikas traders (BID ID -3312093)

M/s Gulshan and Brothers (BID ID -3312538)

SHRI RAM CONSTRUCTION (BID ID -3318160)

MAANVI CONSTRUCTION (BID ID -3317948)

ASW ENTERPRISES (BID ID -3318953)

M/s. Ravi and brothers (BID ID -3318094)

M/s Pal Construction (BID ID -3312352)

S R BUILDERS (BID ID -3312173)