WBPWD/EE/KNHED/e-NIQ-90/24-25

Amount

Cost of labour charges for dismantling the existing distribution wiring ,Old panel, main switches,AC points , computer points , power plug points , single tube light fittings ,twin tube light fittings , HTPN DB , SPNDB , fan , cable and other accessories and mending good the damages as to G.S by Co's own tools and tackles & submit to section office.

A. Supply & Delivery of 4 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes (Make: KEI/Polycab/Gloster) 4Core 25 Sq mm

B. Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting 4Core 25 Sq mm

Supply and fixing compression type gland complete with brass gland brass ring and rubber ring for dust and moisture proof entry of XLPE/PVC armoured cable 4 core 25 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl supplying and fixing solderless socket(Dowels make), tapes, anticorrosive paste & jointing materials For 50 sqmm 4core 4 core 25 sqmm

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Havells/ Polycab/ RR Kable/ KEI/ Gloster) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish Avarage run 8 mtrs

A) On Board

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Havells/ Polycab/ RR Kable/ KEI/ Gloster) in 20mm size PVC rigid conduit 'FR' Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish Average run 4.5 mtr

Supply & foxing of 415V, 6 way Horizontal TPN Double Door MCB Power DB complete with the following accessories and two number matching cable end box inside it and the same to be fitted after concealing the wall and mending good the damages as far as praticable as to G.S (Make: Legrand/Schneider/Siemens/L-K) Incoming 63A 415V, MCB type isolator 1nos Out going (6-32A), 240V, 10KA & C curve SP MCB-18 nos

Supplying and fixing double-doer 2+10 way SPN MCB Distribution Board with P 4243 protection fitted with 1 nos 40 A capacity DP isolator and 10 nos 6/10A capacity class curve 10KA SP MCB, concealed in wall after cutting the wall & mending good the damages to original finish inct, Inter connection with suitable sice of copper wire and neutral link & provision for earthing attachment (Make: Legrand/Schneider/Siemens/L-K)

Supplying and fixing 240 V 6-32A SPMCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (Make: Havells)

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection (Havells) i) 40A DP

ii) 63A FP

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Havells/ Polycab/ RR Kable/ KEI/ Gloster) in 20mm size PVC rigid conduit 'FR' (Precision/ Polycab) incl. necy. fittings as required A) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

B) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

C) 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F150x100x65 mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

Engraving the deptt. number with 10 mm lettering on the body of fan upto 10 letters incl. hifen, stroke or stop and painting upto 10 letters of the engraved number with approved black /red paint as required

Supply and Delivery of 220V 75Watt 1200mm sweep 380 rpm ceiling fan complete with all accessories (Canopy- 2 sets, shakle accessories, down rod, blades) without fan regulator. (Make: Crompton Reveria 1 Star Rating/Orient equivallent/Havells )

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supply & Delivery of 220-240V,20 WATT,2100 lumen 4ft long LED Tube Light. (Make:- Philips/ Wipro/Lighting Technology) With 5 years warranty

Supply and Fixing of 220V 15 Watt LED Bulk Head on Ceiling (Make:- Philips/ Wipro/Lighting Technology) With 5 years warranty

Charges for cleaning of 4ft long LED tube fitting after dismantling the Tube fitting and refixing the same.

Supply and Delivery 220V 12" exhaust fan completely metal Body (Make: EPC/CG)

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter a) 30 cm (12")

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6mm dia x 62 mm long) For GI a) 38 cm Exhaust fan (12")

Supply and fixing outdoor240 v, 160Watt type luminaries complete with all accessories. (Make: Philips/CG/ Wipro)

Supply and Delivery of 1.1kV grade aluminium armoured XLPE cable (Make- RR Kable/ Gloster/ Polycab/ Havells/ KEI) of following sizes: a) 2 Core 6 Sqmm

Laying of cable 2 core 06 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below: 2 Core 06 Sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 2 Core 06 Sqmm

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. a) 2.5/ 1.5 Sqmm

b) 4 Sqmm

c) 6 Sqmm

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe (Jinadal/ Utkarsh/ Bhusan/ Bansal)

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages (a) Solid GI Plate i) No. 8 SWG

S & F Lightning Conductor Air Terminal made of 20 mm dia 1000 mm long GI pipe (ISI Medium) having five discharge prongs of 4 SWG GI (Hot Dip) wire at top duly soldered with 7/16 stranded GI (Hot Dip) wire and 85 mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. complete duly grouted on the parapet etc. in CC mortar ( 4:2:1)

Supply & Fixing 7/10 SWG GI (Hot Dip) stranded wire for Horizontal run on the parapet/roof/wall with GI saddles spaced not exceeding 1100 mm apart incl. mending good the damages to building works

Supply & fixing of 7/10 SWG stranded GI (Hot Dip) wire for vertical run on wall with GI saddles spaced not exceeding 1000 mm apart incl. mending good the damages to building work

Making soldered joints between conductor/ conductor & air terminals by 7/10 stranded GI (Hot Dip) wire incl. supply of jointing materials & painting with 2 (two) coats of Bituminous paint

Making soldered joints between conductor/ down pipes / other metallic objects by 7/10 stranded GI (Hot Dip) wire incl. supply of jointing materials & painting with 2 (two) coats of Bituminous paint

Supply & Fixing of Testing Joints by 20 mm x 3 mm thick GI (Hot Dip) strip 125 mm long grouted on wall having clearance of 6 mm from wall for making connection with thimbles at the end of 7/10 SWG GI (Hot Dip) stranded Wire and 4 SWG GI (Hot Dip) wire of vertical conductor and conductor from earth electrode complete with S & F thimbles, GI bolts, nuts, check-nuts, spring washers etc. as required

Earthing with 50 mm dia TATA-Medium GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level.

Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation, per storey of building per vertical run

Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation of overhead reservoir (vertical run)

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Supplying & fixing 50 mm dia medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required

Supply and installtion of LED glow Sign board of 6 ft x 4 ft sizes signage made with 3 mm letter height 8-16", ACP duely moduled in 2'' raise with the help of 2 " x 1.5 " Alluminium/ GI rectangle hollow section frame and thus it became a ACP box where all the connection wire would be hidden inside it. back side covered by galvanised sheeet. 3" raised Acrylic letter made at 3 mm thick imported trans-light Acrylic sheet would be fitted with male female system where high luminated branded LED module pasted inside the 3D letter. SMPS for power supply would be fitted inside it. Fixing and fitting with 'L' type angle. ( Matter should be approved by EIC)

(Rate should be quotated including all taxes and duties and GST)

K.C. BYSACK AND SONS (BID ID -5729568)

ALPHA ELECTRICALS (BID ID -5685113)

Electromech Engineers Co-Operative Society Ltd. (BID ID -5728029)