SPECIAL REPAIR TO BLDG NO P-4 AND P-17 (UPS SYSTEM/SINGLE LIVING ACCN) OF ASCON NODE RC PEAK UNDER GE ARMY DHAR ROAD

Amount

Demolition of cement concrete of any description complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified .

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete.

Factory made, 35mm thick 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete, all as specified and directed by Engr-in-Charge.

S&F 35 mm thick 2nd class factory Made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat all as specified and directed

S&F Pressed steel frames of size 125x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate incl filling hollow of frame with plain cement concrete type B0 (1:3:6 )(using 12.5mm graded aggregate ,etc complete all as specified as directed.

S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified .

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 300 mm long.

S&F MS 150mm long ordinary rat tail rod pattern spring incl roller and plate complete all as specified

S&F aluminium handles cast type, anodised, 200 mm size complete, all as specified .

S&F galvanised mild steel wire cloth 0.46 mm nominal dia of wire of average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staple

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; door frame, and similar work conforming to Fe 290 Gde-E-165 all as specified .

S&F Steel windows made up of box steel section of 16 gauge ms sheet ub outer frame, shutter farame and centre frame with outer side glazed shutter and inner side wire gauged shutter fixed as shwon in drg consisting with two nos pintol hinges 75mm long, two Nos stove enemaled tower bolts 150 mm long and one No steel handle, deovitailed or welded each panels complete with necessary cleats and stopers all as specified as directed.

M&L for 75 mm thick in Plain cement concrete type C2 ( 1:3:6)( using 20 mm graded aggregate ) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site.

Supply only liquid water proofing compound.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.

M&L for 15 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement incl mixing of water proofing compound complete all as specified. (Note: Water Proofing compound shall be measured and paid for separately)

M&L for 10 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:6, finished fair and even without using extra cement incl mixing of water proofing compound complete all as specified. (Note: Water Proofing compound shall be measured and paid for separately)

M&L Two coats of cement base paint on newly plastered wall surfaces over a coat of alkali resistant primer including preparation complete all as specified and as directed.

M&L for preparing new plastered surfaces Applying two coats of white wash on new plastered surface over a coat of alkali resistant primer of any description of approved tint over new plastered surface..

Preparing new plastered surfaces of walls and applying two coats of weather coat paint as on facia, fins, chajja border, columns, drops, parapets, etc. over a coat of painting primer, complete all as specified

Preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, all as specified.

Preparation of old steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, all as specified.

Preparation of new wooden or wood based surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, all as specified.

S&F sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 Sqm in each pane 3mm thick all as specified

Dismantling of plain, corrugated or semi corrugated sheeting, of any description, roof coverings all as specified.

S&F painted galvaume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified as directed.

S&F painted galvaume aluminum zinc coating GI based plain steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified as directed.

M&L for brushing neat cement slurry with 3.00 Kg of cement per sqm all as specified and directed.

Demolition of Roofs, floors (other than ground floors), beams, staircase, landing, chajjas and similar suspended work and any other similar portion complete all as specified.

Form work for fair finish to edges of concrete flats, treads breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide in any other similar work/situation complete all as specified.

Formwork for fair finish to Chajjas troughts and similar items incl edges complete all as specified.

Mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

M&L for reinforcement cement concrete type B-1, 1:2:4 (using 12.5 mm graded stone aggt) as in Chajjas complete all as specified

M&L for machine cut kota stone slab 20-25 mm thick as in floor of over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl screed bed or bedding layer of mortar 20mm thick in cement mortar 1: 4 for laying floor finishes complete.

M&L for machine cut kota stone slab 20-22 mm thick as in riser of stwps, skirting. dedo and pillar laid over cement plaster and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Dismantling wall and ceiling board (fibre, pulp, insulation etc or insulation boards/slabs/blankets any thickness incl cover fillets.

S&F 18 mm perforated particle board/tiles in ceiling/wall, flat and sloping for insulation and accoustic purposes, 60 x60 cm in size, fixed with screw to timber/iron frame work or with stlaples on snap grid complete all as specified as directed.

M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in back of pressed steel door frame/chowkhat and fixing of bed block of hold fast etc complete all as specified and as directed.

S&F Fe410-W (gde-E-250) quality A Joist channel , angle, or te section for grid frame connecting plates. Etc.(cut to ordinary lengths I,e within 20 mm of length indicated)

M&L for complete removal of existing treatment on internal wall by scraping, sand papering and applyin two ccoats of oil emulsion distemper of approved tint on wall by usin roller/spray all as specified and as directed by Engr-in-Charge.

Taking down old unserviceable/deterioarated batten /PVC conduit point wiring aluminium/copper from existing place i.e light, fan ,soclet or power points complete with all unserviceable fittings such as switches, sockets, bell push, celling rose, pendants, holders etc and making good all disturbed surfaces to wall, floor etc by means of cement mortar (1:3) or plaster of paris and to match / finish new surfaces as the existing surface either by using same colour distemper , putti or white / colour wash all as required and directed by engineer-in-charge.

M&L for concealed Point wiring for Power point contolled by one 15 Amp switch independent with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 4.0 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping(ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet(HYLUM BRAND) top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 2.5 Sqmm as continous earth wire connected to common earth and erth dolly complete all as specified and as directed. Make of wire : Finolex/Havells/Polycab.

One light / Fan / Bell point controlled by one way switch 6 Amp .

One 3 pin socket outlet 5 Amps on the same board with other switches

One 3 pin 5 Amp socket out let controlled by one switch on independent board

Point wiring for Power point contolled by one 15 Amp switch independent with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 4.0 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping(ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet(HYLUM BRAND) top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 2.5 Sqmm as continous earth wire connected to common earth and erth dolly complete all as specified and as directed. Make of wire : Finolex/Havells/Polycab.

Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Supply & fixing switch piano flush type (ISI marked), single pole, one way 16 Amps, 240 Volts complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Supply and fixing socket outlet 2 in 1, 3 pin, 6 Amp piano complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Supply and fixing socket outlet, 2 in 1, 3 pin 16/15 Amp, piano flush type complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

S & F for batten angle lamp holder insulated body with back plate suitable for batten fittings including complete all as specified and as directed.

S & F medium step type fan regulator 120 watt, 240 Volt AC , Socket Size, medium step"ISI marked complete all as specified and as directed.

S&F wall mounted LED batten 18/20 Watt with 01 No LED tube rod, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver includingdismantling unsv FTL fitting T8 type any type complete all as specified and directed. Make: Crompton cat part No DMLN1LT8-16 LT5RT-18-CDL / Bajaj Cat Part no BLRB-DB 118 & BLRB 18W CWc XE or equivalent in Phillips /OSRAM

S&F LED building security light 35 watt,230V complete with all accessories and including connecting up to celling rose with 0.5 sqmm three core copper flexible conductor cable, one GI medium grade suitable size dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener inc dismantaling taking down unsv fitting any type all as specified and directed. Make- Wipro Cat Part No LR02-391xxx-57-xx or equivalent in CG/Phillips.

Supply and fixing MCB, single pole 'C' series having braking capacity 10 KA, 6 to 32 Amp, 240 volts, complete all as specified & directed. Make : Legrand/Schneider/Havells

Supply & Fixing MCB SPN having braking capacity 10 KA 35-60 Amp, 240 Volt 'C' Curve complete all as specified and directed. Make : Legrand/Schneider/Havells

Supply & Fixing sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral link & earth bar and cement spill protector, 8 way, 240 Volt . Make : Legrand/Schneider/Havells

M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces all as specified and directed. Make of wire : Finolex/Havells/Polycab. NOTE: (a)Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and medium grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete ass as specified and testing on completion complete ass as specified and directed .Note - The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made.

Supply and fixing Ceiling fan 230 Volts complete and accessories with 1200mm sweep and assembling the same at site complete including supplying and fixing PVC insulated twisted 3 core 23/0.0076 copper conductor flexible PVC insulated wire of required length from connector to fan painting MES Number with Black Bold letters with synthetic enamel paint upto 2.50 cm high complete all as specified and directed by Engineer in charge.

Supply and fix Exhaust fan 300mm sweep , Make : Bajaj /Havells,900 RPM

S & F in replacement of Kit Kat DB by TPN DB double door of protection grade 7P43 in five powder coated, matt finish with best CRCA Sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 8 4ay, confirming to IS 13032 & 8623 including chasing/ cutting of wall and concealled and making good as existing surface complete all as specified and directed.

Supply only MCB TPN, 63 Amps, 24 Volts AC,10 KA Breaking capacity C series ISI marked and confirming ti IS 8628/ AEC 60898 complete all as directed.

Supply, lay and testing under ground cable LT 1100 volts grade heavy duty XLPE insulated armoured with aluminium stranded conductor and and connecting suitable size of lugs complete laid in trenches/fixed to poles/drawn through pipe with suitable size cable glands crimping type cable lugs etc inculding taking out old unserviceable underground LT cable from trench/pole/wall etcall as specified and directed of size 35 Sqmm 3.5 core

Excavation in trenches in any type of soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide and getting out complete all as specified and as directed by the Engineer-in-Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick (soil) complete all as specified and as directed.

Removing surplus excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed by the Engr-in-charge.

M & L Dry sand cushioning with a layer of sand 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cables in trenches complete all as specified and as directed.

Brick , laid dry , old size, well burnt sub class ’B’ laid with width equal to length of brick as mechanical protection to under ground cable complete all as specified and as directed.

devraj chalotra