WORK AGAINST BUSINESS PLAN 2024-25 PART-2 IN THE AREA OF EUDC, ALIGARH

Amount

Safe carriage of following materials from Store centre or any other place to the respective site of work through the Kachha/Pacca road including loading, unloading at the respective ends and erection of same including the work of dragging as per site requirement, Cost of labour, T&P carrier etc. required for proper completion of work as per RESPO Norms is included in the work.

11 KV RMU 3 Way (upto 3000 KVA) (Erection work including Grouting, Plinth & Painting)

11 Mtrs. ST Pole

13 Mtrs. ST Pole

Earthing complete

Stay complete(GI Stay Rod 16x1800mm, 5 Kgs. Stay wire 7/8, Stay clamps, Insulator, Bolts, Nuts & Washers)

11 KV XLPE Cable 3x185sq.mm.

ACSR DogConductor

33KV XLPE Cable 3x300 Sq.mm. (laying in HDPE pipe with HDD method in double CKT. With Loop)

Disc Insulator B&S type 7000KG

Disc fitting for dog 7000KG

33 KV Pin Insulator

33 KV Pin with nut

11 KV Pin Insulator

11 KV Pin with Nut

11 KV Disc Insulator with fitting

33 KV cable Jointing Kit 3x300sq.mm. (outdoor)

11 KV cable Jointing Kit 3x185sq.mm. (Indoor)

11 KV cable Jointing Kit 3x185sq.mm. (outdoor)

Supply, fixing and erection of following materials as per site requirement as per RESPO Norms:-

Stone Pad

HDPE Pipe 140 mm. Dia (laying with HDD method)

11 KV Cross Arm

Top Channel size 125x65x2240 mm.

Dropper Channel

Tee off Chennal size 125x65x3200 mm. for 33 KV

Tee off Chennal for 11 KV

MS Angle size 65x65x6mm., 4300 mm. long bracing with 04 Nos. Clamps for 33 KV

MS Angle Iron Bracing with 04 Nos. Clamps for 11 KV

Belting Angle

PG Clamp

E Braket for 33 Kv

F Braket for 11 KV

Number Plate with Clamp for 33 KV

Danger Board with Clamp for 33 KV

Barbed Wire

M.S. Nut Bolt & Washers all size

Alluminum Binding wire 6SWG

G.I. pipe 6" Dia

Clamp for holding of G.I. Pipe

Clamp with Nut Bolt

Aluminum Paint

Red Oxide Paint

Concreting of Stay

Concreting of Support

Neutral & Body earthing at 11KV RMU by drilling/boring a hole of size 200 mm dia and 3000mm long in depth and then inserting the Gel earthing electrodes of size 50mm dia and 3000 mm long inside the pit then mix the back fill compound nicely with the soil and re-filling the empty space around the earthing electrode including making of chamber at the top of the earthing as per direction of supervising engineer. It includes the cost of all material labour, T&P, carrier etc. required for proper completion of work. The aforesaid work shall be carried out as per RESSPO norms. Max neutral to earth voltage should be less than 3 volts and earth resistance should be less than 1 ohm.

Providing and fixing of welded wire mesh fencing around transformer plinth with M.S. Angle of size 35X35X6 mm. length and 1.20 Meters height, such panels shall be supported on M.S. Angle from of size 40X40X6 mm. having 04 Nos. corner supports of height 1.65 Meters including extended legs for grouting which will be used as a door for entry of the personnel or removal/shifting of transformer with welded hinges, sliding belt etc. for locking the arrangement as per drawing and specifications the fencing will be painted one coat of red oxide primer and then two coats of bus green synthetic enamel paint. The rates should be inclusive of all materials required for proper completion of above work (length of each fencing approx. 11 Meters)

Dismantling and removal of following material from the existing line and then stacking in the respective JE’s (Store) as per direction of Supervising Engineer. It includes the work of cartage, cost of labour, T&P carrier etc. required for proper completion of work.

Dismentling of old & used ST Pole Scrap with other material

Dismentling of Dog/Weasel Conductor Sracp

Dismentling of Iron Scrap

SANJAY ELECTRICALS (BID ID -4894063)

M/S JITENDRA KUMAR (BID ID -4894049)