Extension of existing night shealter building in Dhurwa Bus Stand under Ward No 39

Labour for cleaning the work site before and after work etc.

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l.

Extra for earth work in hard soil as per specification and direction of E/I. (vide classfication of soil item B)

Filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50Mand lift of 1.5M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement compacted volume).

Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level 1:2:4 (20 mm nominal size)

Providing designation 75 B brick work in C.M.(1 :6) in foundation & Plinth with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing designation 75 B brick work in C.M.(1 :6) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering and shuttering --- do------ E/I. 1:1.5:3 (20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, band, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement: with 1.1.5.3

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, band, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement: with 1.1.5.3

Reinforced cement concrete work in walls(any thickness),including attached pilasters, buttresses,plinth and string courses,fillets columns,pillars,piers,abutments,posts and struts etc.above plinth level up to floor five level,excluding cost of centering,shuttering,finishing and reinforcement: 1:1.5:3(1 cement :1.5 coarse sand(zoneIII):3 graded stone aggregate

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, band, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement: with 1.1.5.3

Reinforced cement concrete work in walls(any thickness),including attached pilasters, buttresses,plinth and string courses,fillets columns,pillars,piers,abutments,posts and struts etc.above plinth level up to floor five level,excluding cost of centering,shuttering,finishing and reinforcement: 1:1.5:3(1 cement :1.5 coarse sand(zoneIII):3 graded stone aggregate

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, band, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement: with 1.1.5.3

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, band, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement: with 1.1.5.3

Providing and laying damp proof course 50 mm thick with cement concrete M-150 with nominal mix of (1:2:4) ….do…..

Providing tor steel reinforcement of 8mm.,10mm,12mmm&16mmmdia. rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. Taking 8mm TMT FE 500 ( only valid for Tata (Tiscon) SAIL, JSPL, Electro Steels Ltd., Bokaro, & Vizag (RINL) 8 dia

10mm dia

12 and above dia

centering and shuttering including strutting, propping etc. and removal of form for

Lintels,beams,plinth beams girders,bressumers and cantilevers

Suspended floors,roofs,landings,balconies and acess platform

Columns,pillars,piers,abutments,post and struts

stairs,(excluding landing)except spiral-staircases

Supplying, fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with block board core bended with high quality phenol formal dehydes synthetic resin of standard make with aluminium fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/I.

Providing & fixing pressed steel door frames manufactured from commercial mild steel sheet of 1.25mm thickness including hinges ,jamb, lock jamb, bead and if requiredangle threshold of mild steel angle section 50 X 25mm, orangle threshold of mild steel angle section 50 X 25mm, orbase ties of 1.25mm pressed mild steel welded or rigidlyfixed together by mechanical means, adjustable lugs withsplit end tail to each jamb including steel butt hinges split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and 2.5mm thick with mortar guards, lock strike-plate andshock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by the Engineer Incharge - Profile - B - Fixing with adjustable lugs with split end tail to each jamb

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285 fixing with dash fasterners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required DPDM rubber/neoprene gasket etc., aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/panelling C.P. brass/stainless steel screws, all complete as per architetural drawings and the directions of Engineer-in-charge (Glazing, panelling and dash fasteners to be paid for separately) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required inlcluding the cost of EPDM rubber/neoprene gasket required (fittings shall be paid for separately) --- Polyester Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, windows, ventilators, shutters and partitions etc, with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge (cost of aluminium snap beading shall be paid in basic item) With float glass panes of 4mm thickness

providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) tramsparent or dyed to required colour or shade with necessary screws etc. complete 125X75X4mm

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete Twin rubber stopper

Providing and fixing luminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transpoarent or dyed to required colour or shade with necessary screws etc. complete 150X10mm

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or deyed to required colour or shade with nuts and screws etc. complete 250X16mm

supplying,fitting and fixing fully glazed door,window or ventilators of standard rolled Z and mullion steel sections and size as per IS 1038 joints met …....do….all as per specification and direction of E/I.

Providing and fixing fan hook of 16mm dia M.S. bar 1 metre long bent to required size and shape, placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/l. (where material is not supplied by deptt.)

Providing and laying 25mm thick Kotah stone slab flooring of approved size. taxture and colour and over 19mm thick base cement mortar (1:3) and joined with grey cement slury mixed with pigment to match the shade of the slab including rubbing to granolithic finish with approved quality of carborandum stone including cost of curing, txes and royalty all complete as per building specifiction and direction of E/I.

Providing and laying 25mm thick Kotah stone tiles in risers of steps, skirting and pillars of approved size, taxture and colour and over 12mm thick cement mortar (1:3) and joined with grey cement slury mixed with pigment to match the shade of the slab including rubbing to granolithic finish with approved quality of carborandum stone including cost of curing, txes and royalty all complete as per building specifiction and direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Repair to plasterof thickness 12mm to 20mm in patches of area 2.5sq.meters and under,including cutting the patch in proper shape,raking out joints and preparing and plastering the surface of walls complete,including disposal of rubbish to the dumping ground,all complete as per direction of Engineer in charge.

Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5with 5% cico or any other approved water proofing compoundincluding taxes and royalty all complete as per building specification and direction of E/l.

Providign and applying Plaster of Paris Putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Providing two coats of oil bound distemper ofapproved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Finishing walls with premium acrylic smooth exterior paint with sillicone additives of requited shade . New work : 2 or more coats applied @1.43 Ltr/10sqm over and including base coat of waterproofing cement paint applied @2.2 Kg/10 sqm

Providing French spirit polishing over new wooden surface to give desired texture and gloss with approved make and shade of ready mixed French polish including cleaning the surface after removing dirt, scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specifcation and direction of E/I.

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.

Providing & fixing on wall face unplasticised - Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . Single socketed pipes. 110 mm dia

Providing and fixing on wall face unplaqsticised- PVC moulded fitting/ accessories for unplaqsticised- PVC rain water pipes confirming to IS: 13592 TYPE A,including jointing with seal ring confirming to IS: 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. Bend 87.5 degree 110x110x110mm

Shoe (Plain) 110mm shoe

Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes by means 50X50X50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the wall etc. complete - 110mm

Providing and fixing stainless steel (grade 304) railing made of Hollow tubes, channels, plates etc,. Including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessry stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasterners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasterners etc,.)

Dismantling pucc brick or lime work including stacking serviceable materials in foundation…....do…..E/I.

Dismantling RCC work including

Making plinth protection50mm thick of cement concrete 1:3:6(1cement 3course sand6stone aggregate)….do…E/I.

providing 150mm wide brick drain in cement mortar(1:6) with av. 150mm clear depth and 125mm apron including cost of earthwork involved with 75A flat soling in proper

Bricks - 7KM + 1 km.

L.sand 13 km

Sand - 49 km

Chips - 22 km

supplying and drawing following sizes FR PVC insulated copper conductor ,singe core cble in the existing/recessed steel/PVC conduit as required JSR 1.15 2 X 1.5 sq mm JSR 1.15.2

2 X 2.5 Sq mm JSR 1.15.11

2 X 6 sq.mm JSR 1.15.29

10 Sq mm ISI marked, FR LS PVC insulated, single core copper conductor cable JSR M-449

S/F modular type switch/socket : Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5 pin 5/6 amp 3 pin socket outlet JSR 1.24.4

5/6 amps. One way Switch JSR 1.24.1

15/16 amp one way switch JSR 1.24.3

15/16 amps.6 pin socket outlet JSR1.24.5

25 mm dia ISI marked ,PVC conduit JSR M-472

Batten holder:- supplying and fixing batten/angle holder including connection as required JSR 1.34

S/F Ceiling rose:- Supplying and fixing 2pin 5amp. Ceiling rose on the existing juction box/wooen block includinhg connection as require JSr 1.33

Decorative ceiling fan 48"(1200) JSR M-778

Electronic step fan regulator delux JSR M-574

S/F modular boxes,base &cover plate:- supplying and fixing following size/modules,GI box along with modulerbase& cover plate for moduler switches in recess etc as required switch/ socket on the existing switch box/ cover including connections etc. as required.JSr 1.27 4/5 module(78mmx140mmx50mm) JSR 1.27.2

6 module(78mmX205mmx50) JSR1.27.3

8/9 module (78mmX230mmX60mm) JSR 1.27.4

12 module (135mmx205mmX60mm) JSR 1.27.5

6 way, SPN single door MCB DB JSR M-681

8 way,(4+24),TPN MCB DB single door JSR M-672

6 amps MCB SP JSR M-624

6 to 32 amps. Rating MCB SPN C series 10 kva JSR M -627

100 amps,4 pole RCCB,100mA/300mA JSR M-656

50/63 amps ratingTPN MCB C series 10 kva breaking capacity JSR M-649

Providing ad fixing following capacity busbar chamber with 4 strip of length 300 mm made of copper suitable for following capacity complete with all accessories including connection,earthing the body etc as required 100 amps JSR 2.5.1

Sheet metal ON/OFF load changechangeovercapacity 4 pole with side handle in existing metal boardincluding drilling holes in metal board ,marking connection earthing the body etc as required 100 amps 4 pole 2.6.5

15/16 Watt LED Bulb JSR M-856

Vertical type panel board(4'x5') MR

80mm dia Earthing electrode 2mtr Length / 80mm dia Earthing electrode 3mtr length / 50 mm dia earthing electrode 2mtr length /50 mm dia earthing electrode 3mtr length & backfill compound chemical 4 bag(per bag 25 KG) JSE M-871

GI wire 10 SWG JSR M-

Good & Service Tax (GST)

Labour Cess

Please Enable Macros to View BoQ information