ADDITION/ALTERATION CUM SPECIAL REPAIRS TO OFFRS, JCOS AND OR MD ACCN AT NEW CANTT PRAYAGRAJ.

Amount

B&R PORTION- Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete.

M & L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 300X 7mm thick , first or premium quality set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10mm thick in cement mortar 1:4 finished rough to receive wall tiles etc.complete all as specified and as directed.

M & L for joint free Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, first or premium quality in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for joint free Non skid ceramic colour tiles 7 to 8 mm thick,first or premium quality area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per above item No-4 here-in before but on vertical surfaces including 10mm thick screed plaser in CM 1:4 , complete all as specified and as directed.

M & L for vitrified tiles double charged, floor tiles (scratch free) 10mm thick (square/ rectangular) area of each tile not exc 0.36 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

All as per above item No-6 here-in before but on vertical surfaces including 10mm thick rendering in CM 1:4 , complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, laid bedded and pointed in cement mortar aprons etc. complete all as specified and as directed.

M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20mm thick screed in CM 1:4 including cutting, polishing, rubbring & moulding of edges including making hole in granite slab for gas pipe complete all as specified and as directed.

M&L for green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and likeover 20 mm thick in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking plateform and other similar situation complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for incl removing rubbish off the premises complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even without using etxra cement complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).

M&L for 60mm thickness,M-35 grade Interlocking Paver block ,rubber moulded of any shape and size conforming to IS 15658-2006 of in set jointed and pointed with grey cement slurry and pigment to match the floor approved design /colour set over coarse sand bedding all as specified and directed.( Sand shall be measured and paid separetely)

M&L for 25 mm thick sand cushion and joint filled with fine sand including leveling tamping & sweeping etc all as specified & directed.

M&L for 75 mm thick Cement concrete 1:4:8, type D-2, (using 40 mm graded stone aggregate) in sub base of flooring complete all as specified and as directed.

Dismantling of brick tiles or terracing tiles, single layer on roofs complete all as directed.

Demolition of mud in roofs, any thickness, including plastering and leeping ( whether full thickness removed or only a part thereof).complete all as directed.

Removing of surplus excavated/demolised materilas to a distance exc 250mtr but n.exc 500m and deposited where directed at a level n. exc 1.5 m above the starting point.complete all as specified and as directed.

Cutting crack to 'V' groove section in existing roof cleaning out wetting grouting with cement and sand slurry of 1:3 complete all as specified and directed.

M&L for PCC 1:2:4, type B1 using 20 mm graded stone aggregate as in roof kerbs / benching / coving and roof padding over roof surfaces /sunken treatment etc rounded or chamfered on edges, complete all as specified and as directed.

M & L for cleaning of all loose dirt and dust from roof surfaces and applying roof treatment as under :- (a) 10 mm thick plastering in CM (1:3) using 100 % coarse sand on roof / parapet walls with WPC @ 3 % by weight of cement. (b) Preparation of newly plastered surfaces of roof including cleaning the surface by using wire brush/pressure hole and applying high performance polyurethane liquid membrane roof coating applied cold in two coats @ 1.5 Kg/Sqm, two coats spray/brush applied with an alongation of 300% to 700% and tensile strength of not less than 3 N/Sqmm as per ASTM D412 and ASTM D2370,crack bridging ability of 3.5 mm as per ASTM C 1305 and hardness of not less than 60 as per ASTM D 2240. The item includes epoxy primer applied @ 0.15 Kg/Sqm and a geotextile of 40 GSM to be applied over fires coat while first coat is still wet, complete as per manufacturer's instructions. Note:1. WPC shall be measured & paid seperately under respective item.

Supply only integral water proofing compound ISI marked complete all as specified and as directed.

M&L for cement concrete tiles 30cmx30cmx 25mm thick set jointed and pointed in neat cement slurry in floors with grey cement and pigment, complete all as specified and as directed.

M&L for 20mm thick screed bed in CM (1:6) as in sub base of floor complete all as specified and directed.

M&L Water proofing treatment to walls of bathroom consisting of the following operation :- (i) Cleaning of surfaces by wire brushing and removing dust particles (ii) Filling of all brick joints with cement mortar 1:4 (iii) Appling two coat of Fosroc Brushbond 2 component POLYMER MODIFIED CEMENTITIOUS water proof coating with proper overlapping when the coating is green all as specified and sprinkling of coase sand on the surface to make it rough.

Preparation of new or previously untreated surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of bituminous aluminium paint, complete all as specified and directed.

Repairing of RCC projections chajjas, roofs, facia etc by necessary preparation, scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC and providing cement concrete (1:1.5:3) using 12.5 mm graded crushed stone aggregate including necessary form work and reinforced with chicken wire mesh and rendering in cement mortar 1:3 using coarse sand in patches area not exceeding 5 sqm each and thickness of RCC member not exceeding 70mm including applying two coats of finishes as provided to the existing surfaces at any height complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area exc1.5 but n. exc 4 Sqm each.complete all as specified and as directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each.complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed

S&F pressed steel frame for door with one or more rebates size 125x60mm including necessary fixing lugs, lock striking plates,hinges,hold fast etc. complete size /profile of frame as per IS complete all as specified and as directed.

S&F pressed steel frame for door with one or more rebates size 105x60mm including necessary fixing lugs, lock striking plates,hinges,hold fast ,etc. complete size /profile of frame as per IS complete all as specified and as directed.

M&L for plain cement concrete cast in situ 1:3:6 type C1 using 20 mm graded stone aggregate as in copings ,hold fast,back filling of pressed steel frame and other similar work water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including form work all as spcefied and directed

M&L for 35mm thick factory made shutter plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed .

S & F Flush shutters 35 mm thick, factory made solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed.

Supply and fixing factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed.

S&F Stainless steel wire mesh 0.36 mm dia fixed with tinned tacks of stainless steel wire and average width of aparture 1.4mm complete all as specified and as directed.

S&F Aluminium section powder coated of colour as approved openable sliding type ,three track window/ventilators with sliding shutter and frame ,Series-C with aluminium section of size including 5 mm thick tinted glass and mosquito proofing net as indicated below complete all as specified & directed (i) Frame section 92 X 31.75 X 1.20 mm (ii) Shutter top bottom and side rails 39 X 20 X 1.50 mm (iii) Glass 5 mm thick one side reflective glass and other side visible of with rubber gasket with clips and hold fast 04 nos for each window including necessary handles, tower bolt etc. complete (iv) Aluminium grill 7.5 mm dia design no. DG - 102 make DECO grill or design no AL - 103 make fixed to aluminium section 50X20X1.5 mm in existing opening. (v) stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm fixed with tinted tacks or galvanized wire staples complete .

S & F of powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S & F of powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.) suitable handle (1 no.) complete all as specified

S & F Sheet glass 5.00 mm thick, ordinary quality and glazing with oil putty in square n. exc 0.5 sq. m in each pane complete all as specified and as directed.

Repair only of manual type operated steel rolling shutters area 6 to 8 Sqm of each shutter, including repair of top cover, an choring rod, hasp and staple,spirings incl. taking down and refixing and providing small items if requered and including two coats of synthetic enamel paint colour as approved by GE and incl. preparation of old steel surfaces; erected in position as indicated, complete all as specified and as directed.

S&F 1.25 mm thick laths steel rolling shutters, with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indi cated, complete: push pull or manual type complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

S& F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165complete all as specified and as directed.

M& L for 17-18 mm thick Prelaminated particleboard, exterior grade,prelaminated one side with decorative choice amination &other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

Supply and fix continues (piano) hinges, Stainless steel, bright finish width of flap (when open) 30mm.complete all as specified and as directed.

S&F magnetic catches with steel body ‘H’ type, fixed to shutter complete.

S & F 125 mm dia aluminium handle cast type anodised complete

S&F Locks, cupboard, grade I, size 50mm Brass 4 lever complete all as specifeid and directed.

S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

All as per ser item No .53 here-in before but 150 mm long.

S&F 100mm long,type C-21, Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge , pin anodized complete all as specified .

S & F extruded aluminium bow handle, fabricated type, anodised 125mm long complete fixed with steel screws.

S & F extruded aluminium bow handle, fabricated type, anodised 150mm long complete fixed with steel screws.

S&F Aluminium sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with & including a min of 6 bolts & nuts four on bolt plate & two on staple plate & fixed 250 mm long

S&F in repairs mild steel 300mm, ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed

S & F of chrome plated stainless steel wire basket (storage / Plain basket) pull out type, size 380 x 500 mm with necessary fixing clips etc. complete all as per specified and directed.

S & F of chrome plated stainless steel wire basket (under sink basket) pull out type, size 900 mm with necessary sliding frame structure, fixing clips etc. complete all as per specified and directed.

S&F of Stainless steel auto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as per specified and directed.

S&F of stainless steel handles 138 mm size for kitchen cabinet shutters complete all as per specified and directed.

S & F of chrome plated stainless steel wire basket Cargo pull out type, size 486 x 550 X200mm with necessary fixing clips etc. complete all as per specified and directed.

S & F of chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 530 x 500 mm with necessary fixing clips etc. complete all as per specified and directed.

S & F of chrome plated stainless steel wire basket (Bottle pull out) pull out type, size 150 to 200 mm with necessary sliding frame structure, fixing clips etc. complete all as per specified and directed.

S&F of chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 mm with necessary fixing clips etc. complete all as per specified and directed.

S&F for 18 mm thick 100% Solid PVC Laminated Board of required size comprising of virgin PVC resin of K Valve 57-60 (Suspension Grade),Calcium Carbonate and natural fibers ( Wood powders/rice husk/Wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with having minimum density not less than 650 kg/cbm having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive of 50 N/mm2, Modulus of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with property of being Termite/Borer Free, Water/Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter complete all as per specified and directed. .

S&F 100 mm long stainless steel butt hinges with steel pin complete all as specified and directed.

S & F of chrome plated stainless steel wire basket (Thali basket) pull out type, size 380 x 500 mm with necessary fixing clips etc. complete all as per specified and directed.

Demolition of brick work built in cement mortar and removing rubbish complete all as directed.

M & L for Brick work with fly ash old size bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

Taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed.

Taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors.

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors.

All as per item No. 75 here- in- before but refixing old steel tubing including all new fitting as required at site.

All as per item No.76 here- in- before but refixing old steel tubing including all new fitting as required at site.

Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10cm girth in brick walls complete.

S&F in repair long body 15mm bore bib tap, cast copper alloy with fancy type chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.

S&F for two way bib cock with wall flange complete all as specified and directed .

S&F Single lever CP basin mixer without popup with CP 450mm long braided houses complete all as specified and directed,

S&F in repairs of CP angular stop cock with wall flanges complete valve long body for 15 mm bore pipe with capstan head long screwed shank including CP cover plate fancy type complete all as specified and as directed.

S&F vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screw shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug),including taking down complete all as specified & directed.

S&F 32 mm dia of discharge pipe bottel trap of PTMT having minimum water seal of 25 mm .(Minimum weight 32 mm -260 gms/40 mm-270 gms) etc all as specified and directed.

S&F 40mm bore PVC low density (LDPE) pipe of pressure 6kgf/Cm2 fixed to wall or laid in floor, complete, all as specified.

S&F of wall mixer CP 15mm dia with provision for overhead shower with 115mm bend pipe on upper side,connecting legs and wall flanges complete all as specified snd directed.

S&F Single lever CP sink mixer 15 mm dia with swinging pout on upper side(wall mounted model) with connecting legs and wall flanges complete all as specified and directed,

S&F in repairs of CP towel ring round with round flange complete all as specified and directed.

S&F in repairs toilet paper holder with flap complete all as specified and directed.

S & F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm incl. taking down complete all as specified and as directed.

S & F Stainless steel plate rack (utensil rack) of size (600 mm x 750 mm) and depth 300 mm made with 0.63 mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/bolts incl. taking down complete all as specified & directed.

S&F in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) complete all as specified & directed.

S&F in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified & directed.

S&F in repair CP brass tubular towel rail, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified & directed.

S&F in repair Soap dish,vitreous china white any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair PTMT grating 125mm dia withiout waste hole (Minimium weight 40 grams) complete all as specified and directed.

Supply & fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, seat cover and flush pipe 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified and as directed..

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, of size 630 x 450 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F health faucet including PVC pipe 1.20mm long with brass nuts for EWC, fixed in repairs complete all as specified and directed

S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified. Make: Commander/ slimline/ waterbird complete all as specified and as directed.

S&F in repairs PVC connection 450 mm long suitable for 15 mm bore GI pipe including CP brass nuts on both sides, complete all as specified and as directed.

Demolition and breaking up or taking down PVC/AC/CI/SGSW 100mm/75mm bore pipe drain pipes, set in cement mortar including PCC haunching and bedding,complete all as directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete, all as specified & directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and as directed.

S&F 110mm bore PVC (SWR) bend, any radius complete all as specified and as directed.

S&F 75mm bore PVC (SWR) bend, any radius with access door.complete all as specified and as directed.

S&F 75mm bore PVC (SWR) bend, any radius complete all as specified and as directed.

S&F PVC (SWR) junction single (single T), equal or unequal, 75 mm bore, provided with access door complete all as specified and as directed.

S&F PVC (SWR) junction single (single T), equal or unequal, 110 mm bore, provided with access door complete all as specified and as directed.

S&F PVC(SWR) 110mm dia branch piece, single(single Y) equal or enequal with access door complete all as specified and as directed.

S&F PVC(SWR) 75mm dia branch piece, single(single Y) equal or enequal with access door complete all as specified and as directed.

S&F in repair PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed.

S&F in repair PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) vent cowl 75 mm dia,complete all as directed.

Dismantling PVC water tanks and removing from site of capacity exceeding 250 litres & not exceeding 500 litres etc., complete all as specified and as directed.

S & F for 500 ltr capacity rotational moulded polyethene water storage tanks (Cylindrical vertical with closed top) two layer hoisted and fixed in position including tank nipple etc complete all as specified and as directed.

S&F 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and as directed.

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore, complete all as specified and as directed.

S&F in repair Stainless steel 20mm dia pipe with 1mm thick minimum wall thickness as in curtain rods including brackets and fancy type end knobs, complete, all as specified and directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etccomplete all as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on other than fair face of brick work of walls, mixed with water proofing compound (ISI marked) @ 2% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified. incl mouldings, chamfers, splay srounded or coved angles, beads,grooves and rebate upto 10 cm in width or 15 cm in girth. Note : - Supply only water proofing compound shall be measured and paid for separately.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair face of brick work of walls, finished even & smooth without using extra cement, complete, all as specified & directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement, complete, all as specified & directed.

M&L for rendering 10 mm thick in cement mortar 1:4 on fair face of concrete surface with using water proofing compound as per manufacturer's instruction & finished even & smooth without using extra cement, complete, all as specified & directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including cleaning surfaces etc complete as in sunken portion etc complete as specified and directed.

M & L for concrete , 1:5:10 ,type E2(40mm graded stone aggregate) as in filling and mass aggregate complete as specified and directed.

M&L for polythene film black 50micron thick, laid on a coat of bitumen primer @ 0.3-0.5 Kg/Sqm.complete all as specified and as directed.

S&F 32 mm tubes medium grade galvanized with all fitting and fixed complete to walls and ceiling or laid in floors as in spouts.complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for incl removing rubbish off the premises complete all as specified and directed.

M&L RCC 1:2:4 type B1 (using 20 mm graded stone aggrigate)as in slab,beam etc complete all as specified and as directed..

Form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work n.exc 200mm thick complete all as specified and as directed.

Formwork to rough finished surface edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.

M&L 8 to 10mm dia and over TMT bars, cut to length, bent ot shape required, including cranking, bending , hooking ends and binding with and including mild steel wire(annealed not less than 0.9mm dia) icluding welding,rivetting etc complete all as specified and as directed..

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade over a coat of primer, painting to be carried out with paint sprayers and roller complete all as specified & directed

Complete removal of existing treatment on old surface of wall and applying 2 coats of oil bound distamper emulsion over a coat of primer, preparation of surfaces of wall by scrapping machine tools/electric hand grinder with wire brush & painting to be carried out with paint sprayers and roller complete all as specified and as directed.

M&L for applying 3mm thick wall care putty on newly plastered or old plastered surfaces of wall complete and making the surface smooth on entire satisfaction of Engineer-in -charge all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint over a coat of primer, painting to be carried out with paint sprayers and roller complete all as specified and as directed.

M&L for complete removal old painted or plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint, preparation of surfaces of wall by scrapping machine tools/electric hand grinder with wire brush & painting to be carried out with paint sprayers and roller complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling & applying three coats of white wash, painting to be carried out with paint sprayers and roller complete all as specified and as directed.

M&L for preparing old plastered surfaces of ceilings and applying one coat of white wash incl complete removal of old plastered surfaces, preparation of surfaces of wall by scrapping machine tools/electric hand grinder with wire brush & painting to be carried out with paint sprayers and roller complete all as specified and as directed..

M & L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, painting to be carried out with paint sprayers complete, all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint. preparation of wood surfaces by scrapping machine tools/electric hand grinder with wire brush & paint sprayers complete all as specified and as directed.

M&L for preparation of new surfaces of steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primerof approved tint over a coat of red oxide complete all as specified and as directed.

M&L for preparation of old surfaces of steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified.

M&L for preparing the new plastered surfaces and applying two coats of premium Acrylic smooth exterior paint with silicone additives of required shade @ 1.43 ltr/10Sqm over a coat of 1mm thick wall care putty and including exterior priming coat @ 2.20 kg /10 sqm on walls , painting to be carried out with paint sprayers and roller complete all as specified and direcrted.

Complete removal of existing treatment of wall and applying two coats of premium Acrylic smooth exterior paint with silicone additives of required shade @ 1.43 ltr/10Sqm over and including exterior priming coat @ 2.20 kg /10 sqm on walls, preparation of surfaces of wall by scrapping machine tools/electric hand grinder with wire brush & painting to be carried out with paint sprayers and roller complete all as specified and direcrted.

S& F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws. The minimum thichness of sheet shall be 0.50 to 0.52 mm including AZ 150 complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.complete all as specified and as directed.

S&F for corner glass self (with bracket) complete as approved by GE all as specified and directed.

M&L for providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ or - 0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of wateretc., making arrangement for fixing of hardware. EPDM gasket, 1.2 + or -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories and fitting .Net Opening will be measured for payment purpose.) for Area not exceeding 2.00 sqm each

S&F of Supply and fixing factory made uPVC white colourfixed glazed window/ventilator made of (small series)frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Note:-1-(Glass shall be measured & paid separately).Note:-2- For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.3- Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S& F of 4.80mm thick Sheet glass,ordinary quality and glazing with oil putty insquare exc 0.50 Sqm in each

M&L for 17-18mm thick coloured MDF board prelaminated both side as in Self of foldable table , kitchen cabinet, almirah shutter including side lipping etc complete all as specified.

S&F of stainless steel foldable rack with minimum length of 500mm of bracket , premium quality as in folding table bracket including all fittings and fixture as required for installation complete all as specified and as directed.

S&F of of 15mm thick stepping stone/tiles as in landing of steps/ approach/ terrace size of tiles/stone shall be 1200mm x 600mm from which suitable size landing of steps./approach/terrace shall be cut and applied as per site requirement feed with best adhesive as per manufacturers instruction complete all as specified and as directed.

Preparation of old or previously untreated surfaces of ceiling & applying two coats oil bound distemper over 3mm thick wall care putty complete all as specified and directed.

E/M Works Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials from site and making good disturbed surfaces of walls, floors, etc. complete and all as directed.

M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20mm dia rigid PVC conduit "medium grade" ISI marked including all conduit accessories for concealed wiring for one light/fan point controlled by one, one way switch including 1.5Sqmm FRLS type PVC insulated unsheated cable multi-stranded green colour, cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed".

All as per item No 161 here-in-before but one 3 pin, 5 Amp socket out let on independent board complete all as specified and directed.

All as per item No 161 here-in-before but 3pin ,5amp socket out let on the same board with other switch complete all as specified and directed.

All as per item No 161 here-in-before but One bell/ buzzer point controlled by one push button on the same board with other switches or independent

All as per item No 161 here-in-before but for one socket outlet 16 Amp on independent board with 2.5 Sq mm cable and 2.5 Sq mm earth wire.

S&F ceiling rose surface type bakelite 65x50mm three terminal complete all as specified and directed.

S&F angle/batten type holder insulated body with back plate suitable for light point complete all as specified and directed.

S&F call bell, ding dong type, AC, 230 V, single pole complete all as specified & directed.

S&F modular switch 1 way, 6 amps, 230V AC, one way complete all as specified & directed.

S&F modular socket out let 2-in-1, 3 pin, 6 amp flush type 2 module complete all as specified & directed.

S&F modular switch flush type 16 amps, 230V AC single pole one way complete all as specified & directed.

S&F modular socket out let 2-in-1, 3 pin, 5 & 16 amp flush type 2 module complete all as specified & directed.

S&F modular fan regulator, 5 stepped, electronic type, single phase, 120 watt, socket size incl connection complete complete all as specified & directed.

S&F Modular metal flush box of 6 module complete all as specified and dircted.

S&F Modular metal flush box of 4 module complete all as specified and dircted.

S&F Modular metal flush box of 1/2 module complete all as specified and dircted.

S&F Modular white plate cover with frame of 6 module complete all as specified and dircted.

S&F Modular white plate cover with frame of 4 module complete all as specified and dircted.

S&F Modular white plate cover with frame of 1/2 module complete all as specified and dircted.

S&F modular bell push flush type 6 amp, 1 module SP , 230V AC complete all as specified & directed.

Taking down Old UNSV ceiling /exhaust Fan by disconnecting of all electrical connection and deposit E/M store complete all as directed.

Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F Exhaust fan 300 mm sweep 1200 RPM Metallic body Range complete and shutters including required length and size of copper stranded conductor for connection from ceiling rose to connector of fan with provn of making hole in wall complete with grouting of nuts, bolts and washers and all other accessories required for fixing of fan with aluminum louvers of suitable size including testing on completion.complete all as specified and as directed.

S&F Exhaust fan 250 mm sweep 900 RPM Metallic body Range complete and shutters including required length and size of copper stranded conductor for connection from ceiling rose to connector of fan with provn of making hole in wall complete with grouting of nuts, bolts and washers and all other accessories required for fixing of fan with aluminum louvers of suitable size including testing on completion complete all as specified and as directed.

S&F in replacement of sheet metal enclosure single pole and neutral enclosure with a two pin and earth plug and socket along with one MCB, single pole of current rating 20 amps, C series 240 volts AC complete all as specified & directed.

Supply & fixing in repair sheet metal enclosure Vertical TPN DB 4 Way as per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 250 A Copper Busbar for each phase with 2 Neutral bar, 2 earthbar and Cable ties for Cable manage-ment, fully insulated busbar & shrouded Neutral bars, Improved Pan assembly for easy of installation, Prefitted masking sheet, Reversible Door for IP 54 DB's, With provision for one No 250 Amp,4 pole MCCB as incomer and SP/TP MCB's as outgoing complete all as specified and directed.

S&F for MCB TPN 415 Volts, 'B' series , breaking capacity 25 kA of rating 63 Amps .(for main DB Outgoing) complete all as specified and directed.

S&F double door metallic sheet metal enclosure for DB when MCBs to be used SPN 12 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified & directed.

S&F double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified & directed.

S&F MCB single pole, 6 to 32 amps rating, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.

S&F MCB single pole & neutral 32 amp, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.

Taking down carefully sub main wiring of any nos of wire and size with earth wire on wooden batten/surface conduit/casing caping complete with its all accessories complete all as specified & directed.

Supply and draw sub main wiring of two run 4.00 sqmm single core FR PVC insulated, unsheathed multistranded copper conductor cable 1100 Volt grade, drawn through and including PVC conduit medium duty and accessories of size not less than 20 mm size ISI marked including all conduit accessories for concealed to the surfaces of the wall/ceiling including one run of 4.00 sqmm single core FR PVC insulated unsheathed copper earth continuity conductor all as specified and directed. NOTE : (Two runs of single core cable with one run of earth continuity conductor including PVC conduit accessories shall be measured and paid as one unit length.) including making good disturbed surface all as specified and directed.

Supply and draw sub main wiring of two run 6.00 sqmm single core FR PVC insulated, unsheathed multistranded copper conductor cable 1100 Volt grade, drawn through and including PVC conduit medium duty and accessories of size not less than 20 mm size ISI marked including all conduit accessories for concealed to the surfaces of the wall/ceiling including one run of 6.00 sqmm single core FR PVC insulated unsheathed copper earth continuity conductor all as specified and directed. NOTE : (Two runs of single core cable with one run of earth continuity conductor including PVC conduit accessories shall be measured and paid as one unit length.) including making good disturbed surface all as specified and directed.

Taking down existing old /worn out tube/CFL/bulk head/sketch light fittings of indoor type fixed on wall of any type/size with its all accessories including lamp complete all as specified & directed

S &F LED tube light fittings decorative ultra slim linear fixture with extrudedalluminium heat sink envioromentel friendly Energy efficient ready to use pack ,1x18/20 Watt ,4 feet,surface mounting type extruded pvc, snap on installers and domestic electronic Driver ,connector block ect.with all assoceries intenallt prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75x75mm - 2 Nos etc. complete all as specified and as directed.

Supply & fixing energy efficient LED light of 10 Watt of length - 02 Feet long having minimum 1150 Lumen output, wide voltage protection range 140-270 Volt AC housed in extruded aluminum housing (enhances safety) with high quality polycarbonate diffuser including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed.

S&F LED light fitting 10 Watt bulkhead luminaires in high pressure die cast aluminium housing, lumen out put - 700 Lm, colour Temp - 6500 K having Ingress protection - IP 65 fpr dust, water & IK 08 for external impact including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including bracket for street light made out of 40 mm bore GI pipe medium grade not less than 1.2 mtr length bent at 120 degree to shape fixed on pole/wall with and including 50x6mm FI clamps = 02 Nos with nut bolts, washers including painting of clamps with two coats of synthetic enamel paint over a coat of red oxide primer complete.

M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level Connecting to the Galvanized earth lead wire 4mm dia by means of nut, bolt, check nuts and washers of galvanized iron earth wire in soft/loose soil, GI protection pipe medium grade 15 mm bore including provision of concrete pit made from PCC(1:2:4) type B-1 (using 20mm graded stone aggregates) with 15mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 No and with 6mm dia MS bar handle made to shape, GI medium grade 20 mm bore pipe for watering perforated at bottom,1.75 meter long placed on top edge of earth plate, common salt & charcoal filling,test point made out of 17mmx8mm FI with fixing arrangement ,funnel,wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No.3 of SSR Part-I connected to earth test point complete all as specified or indicated including testing on completion complete all as specified and directed.

Supply & Installation, testing and commissioning of electric chimney of size 60cm x 47 cm (Minimum) stainless steel baffle filter, capacity 1000-1200 m3/hr noise level 65DB, shape rectangular duct size 6 feet (maximum), voltage 240 volt wall mounted panel and including all fitting accessories etc, complete all as specified and directed by Engr-in-Charge.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. as specified and directed.

S&F PVC connection heavy duty with brass union of required length not exceeding 450 mm long with PTMT nuts 15mm bore size complete.

S&F stainless steel angle valve ( Stop valves,) cromium plated with flange screwed for iron pipe of size 15 mm dia (Male thread) complete all as specified and directed.

Supply and fixing stainless steel Pillar tap chromium plated flange screwed for iron pipe of 15 mm dia complete all as specified and directed.

Taking down old Water heater of any size/any make by dissconncting electric connection and water tap, cock and valve and deposited to MES stores yard.

Taking down energy electric meter(KWH) and re-fix the same as directed by Engineer-in-charge.

Supply and lay cable XLPE insulated heavy duty electric cables with aluminum stranded conductor 1100 volts grade cross section area 50 sqmm 3.5 core complete all as directed.

Supply and lay cable XLPE insulated heavy duty electric cables with aluminum stranded conductor 1100 volts grade cross section area 35 sqmm 3.5 core complete all as specified and directed

Excavation in trenches not exc 1.5 Mtr wide and n.exc 1.5 mtr in depth, getting out for electric cable in any type of soil complete.

Removing surplus excavated soil to a distance n.exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above starting point complete

Returning, filling in, soil obtained from excavation including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete.

Supply and laying sub class 'B' bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed.

M & L for sand cushioning with Ganga Sand to underground cable (8 cm thick before laying and 15 cm thick after laying the cable complete all as specified and directed.

M&L (in replacement) for 50 mm bore GI tubing 'light grade' with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size complete all as specified and directed.

R.K.ASSOCIATES

imran construction company