TCMC - Supply and Installation of Science Park machineries at MGR Nagar in Ward No.06 in Zone-1

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum

Supplying and filling in foundation and basement with Crushed Stone Dust in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification.

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification.

Supply, Delivery and Fixing of GI Steel Tubular Pole for Street Light 6 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm) 76.10mm OD x 3.65mm Thick x 6000mm Length including loading and Unloading Charges etc Complete.,

Supply, Delivery and Fixing of 48 W LED Street Light fitting with LED including loading and Unloading Charges etc Complete.,

Supply, Delivery and Laying of 3 1/2 x 35 Sq.mm PVC Aluminium Armoured UG Cable with ISI Mark as per loading and unloading charges to site etc complete

Supply and fixing of Newton's Colour Disc including cost and conveyance of all materials and all other labour charges etc. complete.

Supply and fixing of Straight Bar Passing Parabola including cost and conveyance of all materials and all other labour charges etc. complete.

Supply and fixing of Vortex including cost and conveyance of all materials and all other labour charges etc. complete.

Supply and fixing of First Order Lever including cost and conveyance of all materials and all other labour charges etc. complete.

Supply and fixing of Newton's Third Law including cost and conveyance of all materials and all other labour charges etc. complete.

Supply and fixing of Sun Dial including cost and conveyance of all materials and all other labour charges etc. complete.

Supply and fixing of Floating Bird including cost and conveyance of all materials and all other labour charges etc. complete.

Supply and fixing of Second Order Lever including cost and conveyance of all materials and all other labour charges etc. complete.

Supply and fixing of Persistence of Vision including cost and conveyance of all materials and all other labour charges etc. complete.

Supply and fixing of Musical Tubes including cost and conveyance of all materials and all other labour charges etc. complete.

Supply and fixing of Simple Camera including cost and conveyance of all materials and all other labour charges etc. complete.

Supply and fixing of Periodic Table including cost and conveyance of all materials and all other labour charges etc. complete.

Supply and fixing of Double Ended Cone including cost and conveyance of all materials and all other labour charges etc. complete.

Supply and fixing of Xylophone including cost and conveyance of all materials and all other labour charges etc. complete.

Supply and fixing of Humidity Meter including cost and conveyance of all materials and all other labour charges etc. complete.

Supplying and fixing of Double Swing of height 2.40m height with 40mm dia MS pipes support as legs and top bar is 50mm dia. The seat is 9mm thick reinforced rubber with Antiskid chequred top with heavy ball bearing and the suspension is 7mm dia electro galvanized chain and the cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supplying and fixing of Four Seater SEESAW to a height of 0.50m with 80mm dia leaver and 40mm top bar with MS pipes. The seatr is of moulded plastic with heavy duty bush bearing. The cost shall inclusive of all materials, labours and fixing etc complete as directed by the dpeartmetal officers

Supplying and fixing of slide Senior to a length of 3.00 m with 80mm dia leaver and 40mm top bar with MS pipes.The seater is of moulded plastic. The ladder frme is made up of 25mm M.S. ppe., hanrail 20mm dia MS pipe and the centre support is 80mm dia MS pipes. The cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supplying and fixing of Jungle Gym for below 12 years old childrens to a height of 2.10m with 80mm dia leaver and 40mm top bar with M.S. Pipes. The ladder frame is made up of 25mm M.S.Pipe, hanrail 20mm dia M.S. Pipe and the centre support is 80mm dia M.S. Pipe The cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supply and Fixing of Merry Go Round Four seater 40mm dia GI pipessupport as legs and top bar is 50mm dia. The seat is 9mm thick including cost of Materials and cost of all labour charges for fixing, testing and commissioning the same etc. complete as per specification.

Supply and fixing of Single Twister Sitting Twister- Outdoor Gym Equipment Maximum User Weight of 100 kilogram, Main Central Pipe & Main Frame Pipe of 100mm dia G.I. Pipe with 3.6mm Thickness Standing/ Sitting Twister Frame Pipe 32 mm G.I. Pipe 32 mm dia with 3.2mm Thickness, Disk Support Pipe at Bottom Pipe 80 mm dia G.I. Pipe, Rotating Disk Support, Handle Frame Pipe 32mm dia G.I. pipe Thickness with 3.2mm Thickness,Foundation Pipes 750mm deep GI pipe, supported with M.S. Angle 25 X 25 X4mm of Foundation Pipe 100mm with 3.6mm Thickness,Ball Bearing Foot Rest Aluminum casting material inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supply and fixing of Rower Maximum User Weight 120 kilogram, Main Central Pipe 100mm dia G.I. Pipe Heavy, Handle Frame 32mm dia G.I. pipe, Seat Frame 32mm dia G.I. Pipe, 32mm dia G.I. Pipe, Connecting Links Pipe, Foot Rest Pipe 32mm dia G.I. Pipe, MS Foundation Plate Thickness 12 millimeter 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X4mm Seat and Back Rest 2.5mm thick, M.S. Perforated with uniformbending radius to avoidsharp edges Bearings Tapered Roller Bearing inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supply and fixing of Air Walker/ Stroller Single Maximum User Weight 110 kilogram for Main Frame 125mm dia G.I. Pipe, 40mm dia G.I. Pipe Leg Movement Frame Pipe, Handle Frame 25mm dia G.I. pipe, Tapered Roller Bearing Foot Rest Aluminum castingmaterial MS Foundation Plate Thickness 12 millimeter, Foundation Pipes 750mm deep GI Pipe, supported withM.S. Angle 25 X 25 X4mm inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supply and fixing of Double Seated Chest Press for Maximum User Weight 100 kilogram, Main Central Pipe 100mm dia G.I. Pipe, Handle Frame 32mm dia G.I. pipe, Seat Frame 32mm dia G.I. Pipe, Connecting Links 25mm dia G.I. Pipe, Foot Rest Pipe 32mm dia G.I. Pipe, MS Foundation Plate Thickness 10mm Foundation Pipes with anchoring 500mm deep GI Pipe, Seat and Back Rest 2mm Thick G.I. Seat with uniform bending radius to avoid sharpedges inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supply and fixing of Leg Press Double Maximum User Weight 100 kilogram, Main Central Pipe 80mm dia G.I. Pipe, Moving Frame Pipe 80mm dia G.I. Pipe, Foot Rest Frame/ Foot Rest Hinging Pipe 25mm dia G.I. Pipe, Connecting Links 25mm dia G.I. Pipe, MS Foundation Plate Thickness 10mm Foundation Pipes with anchoring 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X4mm, Seat and Back Rest 3mm thick, HDPE with uniform bending radius to avoid sharpedges inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Plain Cement Concrete 1:1.5:3 (One part of Cement, one and half part of Crushed Sand (M- Sand), three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

V MEENAL AND CO (BID ID -1190741)