Replacement of Sodium Light With LED Light at Village- Unchi Dankaur Acheja Bujurg Fatehpur Atta Ballu Khera and Bhatta yea

Village-Unchi Dankaur Supply and erection of 8.5 M. long P.C.C. pole, confirming to IS 1678-1960, IS 343-1960 and IS 456-1964 grouted with 1:4:8 cement concrete (1 cment, 4 fine sand : 8 over burnt brick ballast of 40 mm nominal size) including the plinthing of pole. Complete with all material, labou, T&P etc. and also including cartage of pole from store to site of works.Complete in all respects as per the directions of the Engineer-in-charge. YEIDA SOR-33

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect as per the directions of the Engineer-in-charge.(old Sodium Fitting scrap value 10% and old fitting as is whare is basis) (Make Philips, Crompton, Bajaj,Havells ) UPPWD/2018 PS-1421 Cat-AAA

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection Complete in all respects as per the directions of the Engineer-in-charge. (Make Philips, Crompton, Bajaj,Havells ) UPPWD/2018 PS-1421 Cat-AAA

S/E of ‘D’ clamps 50X6mm. flat iron on steel tubular pole / steel rail pole with bolts, nuts etc Complete in all respects as per the directions of the Engineer-in-charge. including with aluminium paint. UPPWD/2018 PS-623

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 25 A TPN UPPPWD/2018 PS No-807

Supply, delivery, testing, laying of Al. conductor HDPE/XLPE insulated 1100V grade Arial Bunched Cable with Messenger wire as below on pole Complete in all respects as per the directions of the Engineer-in-charge. (CCI, Gloster, Asian, Universal, NICCO, ICL, Grandley, Polycab, Kalinga & KEI make) Analysis of Rates 2CX25 Sqmm. + 25 Sqmm. (Cable Reduced by 10% for old scrap cable)

S/F of 16sqmm. to 50 sqmm. L.T. A.B.C. connector on pole, Complete in all respects as per the directions of the Engineer-in-charge. YEIDA SOR-36

S/F of 40mm. dia 1.5mtr. long G.I. pipe ‘B’ Class bracket with 2 Nos. ‘D’ clamps 50X6mm. flat iron on steel tubular pole/ steel rail pole / PCC pole with bolts, nuts etc. Complete in all respects as per the directions of the Engineer-in-charge. YEIDA SOR-35

S/F of palm or pin type copper tin plated cable socket (Lug) to the cable leads, insulating with tape & making connections etc. complete in all respects as per the directions of the Engineer-in-charge. UPPWD/2018 PS-504 25 Sqmm.

S/F of copper conductor XLPE insulated, un-armoured cable 3C x 1.5 Sqmm Complete in all respects as per the directions of the Engineer-in-charge. YEIDA SOR-31

Supply & erection of screw tightener Complete in all respects as per the directions of the Engineer-in-charge. YEIDA SOR-37

Numbering of poles with combination of yellow and black colour paint etc. Complete in all respects as per the directions of the Engineer-in-charge. at site. Analysis of Rates

Acheja Bujurg Supply and erection of 8.5 M. long P.C.C. pole, confirming to IS 1678-1960, IS 343-1960 and IS 456-1964 grouted with 1:4:8 cement concrete (1 cment, 4 fine sand : 8 over burnt brick ballast of 40 mm nominal size) including the plinthing of pole. Complete with all material, labou, T&P etc. and also including cartage of pole from store to site of works.Complete in all respects as per the directions of the Engineer-in-charge. YEIDA SOR-33

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect as per the directions of the Engineer-in-charge.(old Sodium Fitting scrap value 10% and old fitting as is whare is basis) (Make Philips, Crompton, Bajaj, Havells) UPPWD/2018 PS-1421 Cat-AAA

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection Complete in all respects as per the directions of the Engineer-in-charge. (Make Philips, Crompton, Bajaj,Havells ) UPPWD/2018 PS-1421 Cat-AAA

S/E of ‘D’ clamps 50X6mm. flat iron on steel tubular pole / steel rail pole with bolts, nuts etc Complete in all respects as per the directions of the Engineer-in-charge. including with aluminium paint. UPPWD/2018 PS-623

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 25 A TPN UPPPWD/2018 PS No-807

Supply, delivery, testing, laying of Al. conductor HDPE/XLPE insulated 1100V grade Arial Bunched Cable with Messenger wire as below on pole Complete in all respects as per the directions of the Engineer-in-charge. (CCI, Gloster, Asian, Universal, NICCO, ICL, Grandley, Polycab, Kalinga & KEI make) Analysis of Rates 2CX25 Sqmm. + 25 Sqmm. (Cable Reduced by 10% for old scrap cable)

S/F of 16sqmm. to 50 sqmm. L.T. A.B.C. connector on pole, Complete in all respects as per the directions of the Engineer-in-charge. YEIDA SOR-36

S/F of 40mm. dia 1.5mtr. long G.I. pipe ‘B’ Class bracket with 2 Nos. ‘D’ clamps 50X6mm. flat iron on steel tubular pole/ steel rail pole / PCC pole with bolts, nuts etc. Complete in all respects as per the directions of the Engineer-in-charge. YEIDA SOR-35

S/F of copper conductor XLPE insulated, un-armoured cable 3C x 1.5 Sqmm Complete in all respects as per the directions of the Engineer-in-charge. YEIDA SOR-31

Supply & erection of screw tightener Complete in all respects as per the directions of the Engineer-in-charge.YEIDA SOR-37

Numbering of poles with combination of yellow and black colour paint etc. Complete in all respects as per the directions of the Engineer-in-charge. at site. Analysis of Rates

Fatehpur Atta Supply and erection of 8.5 M. long P.C.C. pole, confirming to IS 1678-1960, IS 343-1960 and IS 456-1964 grouted with 1:4:8 cement concrete (1 cment, 4 fine sand : 8 over burnt brick ballast of 40 mm nominal size) including the plinthing of pole. Complete with all material, labou, T&P etc. and also including cartage of pole from store to site of works.Complete in all respects as per the directions of the Engineer-in-charge. YEIDA SOR-33

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect as per the directions of the Engineer-in-charge.(old Sodium Fitting scrap value 10% and old fitting as is whare is basis) (Make Philips, Crompton, Bajaj,Havells) UPPWD/2018 PS-1421 Cat-AAA

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection Complete in all respects as per the directions of the Engineer-in-charge. (Make Philips, Crompton, Bajaj,Havells) UPPWD/2018 PS-1421 Cat-AAA

S/E of ‘D’ clamps 50X6mm. flat iron on steel tubular pole / steel rail pole with bolts, nuts etc Complete in all respects as per the directions of the Engineer-in-charge. including with aluminium paint. UPPWD/2018 PS-623

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 25 A TPN UPPPWD/2018 PS No-807

Supply, delivery, testing, laying of Al. conductor HDPE/XLPE insulated 1100V grade Arial Bunched Cable with Messenger wire as below on pole Complete in all respects as per the directions of the Engineer-in-charge. (CCI, Gloster, Asian, Universal, NICCO, ICL, Grandley, Polycab, Kalinga & KEI make) Analysis of Rates 2CX25 Sqmm. + 25 Sqmm. (Cable Reduced by 10% for old scrap cable)

S/F of 16sqmm. to 50 sqmm. L.T. A.B.C. connector on pole, Complete in all respects as per the directions of the Engineer-in-charge. YEIDA SOR-36

S/F of 40mm. dia 1.5mtr. long G.I. pipe ‘B’ Class bracket with 2 Nos. ‘D’ clamps 50X6mm. flat iron on steel tubular pole/ steel rail pole / PCC pole with bolts, nuts etc. Complete in all respects as per the directions of the Engineer-in-charge. YEIDA SOR-35

S/F of copper conductor XLPE insulated, un-armoured cable 3C x 1.5 Sqmm Complete in all respects as per the directions of the Engineer-in-charge. YEIDA SOR-31

Supply & erection of screw tightener Complete in all respects as per the directions of the Engineer-in-charge.Y EIDA SOR-37

Numbering of poles with combination of yellow and black colour paint etc. Complete in all respects as per the directions of the Engineer-in-charge. at site. Analysis of Rates

Supply, Installation, testing and commissioning of Outdoor type distribution transformer. Specification and also confirming to IS: 1180. Level-2 as per the directions of the Engineer-in-charge Analysis of Rates (a) 63 KVA Aluminium wound YEIDA SOR-34

Ballu Khera Supply and erection of 8.5 M. long P.C.C. pole, confirming to IS 1678-1960, IS 343-1960 and IS 456-1964 grouted with 1:4:8 cement concrete (1 cment, 4 fine sand : 8 over burnt brick ballast of 40 mm nominal size) including the plinthing of pole. Complete with all material, labou, T&P etc. and also including cartage of pole from store to site of works.Complete in all respects as per the directions of the Engineer-in-charge. YEIDA SOR-33

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect as per the directions of the Engineer-in-charge.(old Sodium Fitting scrap value 10% and old fitting as is whare is basis) (Make Philips, Crompton, Bajaj,Havells) UPPWD/2018 PS-1421 Cat-AAA

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection Complete in all respects as per the directions of the Engineer-in-charge. (Make Philips, Crompton, Bajaj,Havells) UPPWD/2018 PS-1421 Cat-AAA

S/E of ‘D’ clamps 50X6mm. flat iron on steel tubular pole / steel rail pole with bolts, nuts etc Complete in all respects as per the directions of the Engineer-in-charge. including with aluminium paint. UPPWD/2018 PS-623

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 25 A TPN UPPPWD/2018 PS No-807

Supply, delivery, testing, laying of Al. conductor HDPE/XLPE insulated 1100V grade Arial Bunched Cable with Messenger wire as below on pole Complete in all respects as per the directions of the Engineer-in-charge. (CCI, Gloster, Asian, Universal, NICCO, ICL, Grandley, Polycab, Kalinga & KEI make) Analysis of Rates 2CX25 Sqmm. + 25 Sqmm. (Cable Reduced by 10% for old scrap cable)

S/F of 16sqmm. to 50 sqmm. L.T. A.B.C. connector on pole, Complete in all respects as per the directions of the Engineer-in-charge. YEIDA SOR-36

S/F of 40mm. dia 1.5mtr. long G.I. pipe ‘B’ Class bracket with 2 Nos. ‘D’ clamps 50X6mm. flat iron on steel tubular pole/ steel rail pole / PCC pole with bolts, nuts etc. Complete in all respects as per the directions of the Engineer-in-charge. YEIDA SOR-35

S/F of copper conductor XLPE insulated, un-armoured cable 3C x 1.5 Sqmm Complete in all respects as per the directions of the Engineer-in-charge. YEIDA SOR-31

Supply & erection of screw tightener Complete in all respects as per the directions of the Engineer-in-charge. YEIDA SOR-37

Numbering of poles with combination of yellow and black colour paint etc. Complete in all respects as per the directions of the Engineer-in-charge. at site. Analysis of Rates

Supply, Installation, testing and commissioning of Outdoor type distribution transformer. Specification and also confirming to IS: 1180. Level-2 as per the directions of the Engineer-in-charge Analysis of Rates (a) 63 KVA Aluminium wound YEIDA SOR-34

Bhatta Supply and erection of 8.5 M. long P.C.C. pole, confirming to IS 1678-1960, IS 343-1960 and IS 456-1964 grouted with 1:4:8 cement concrete (1 cment, 4 fine sand : 8 over burnt brick ballast of 40 mm nominal size) including the plinthing of pole. Complete with all material, labou, T&P etc. and also including cartage of pole from store to site of works.Complete in all respects as per the directions of the Engineer-in-charge. YEIDA SOR-33

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect as per the directions of the Engineer-in-charge.(old Sodium Fitting scrap value 10% and old fitting as is whare is basis) (Make Philips, Crompton, Bajaj,Havells) UPPWD/2018 PS-1421 Cat-AAA

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection Complete in all respects as per the directions of the Engineer-in-charge. (Make Philips, Crompton, Bajaj,Havells) UPPWD/2018 PS-1421 Cat-AAA

S/E of ‘D’ clamps 50X6mm. flat iron on steel tubular pole / steel rail pole with bolts, nuts etc Complete in all respects as per the directions of the Engineer-in-charge. including with aluminium paint. UPPWD/2018 PS-623

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 25 A TPN UPPPWD/2018 PS No-807

Supply, delivery, testing, laying of Al. conductor HDPE/XLPE insulated 1100V grade Arial Bunched Cable with Messenger wire as below on pole Complete in all respects as per the directions of the Engineer-in-charge. (CCI, Gloster, Asian, Universal, NICCO, ICL, Grandley, Polycab, Kalinga & KEI make) Analysis of Rates 2CX25 Sqmm. + 25 Sqmm. (Cable Reduced by 10% for old scrap cable)

S/F of 16sqmm. to 50 sqmm. L.T. A.B.C. connector on pole, Complete in all respects as per the directions of the Engineer-in-charge. YEIDA SOR-36

S/F of 40mm. dia 1.5mtr. long G.I. pipe ‘B’ Class bracket with 2 Nos. ‘D’ clamps 50X6mm. flat iron on steel tubular pole/ steel rail pole / PCC pole with bolts, nuts etc. Complete in all respects as per the directions of the Engineer-in-charge. YEIDA SOR-35

S/F of copper conductor XLPE insulated, un-armoured cable 3C x 1.5 Sqmm Complete in all respects as per the directions of the Engineer-in-charge. YEIDA SOR-31

Supply & erection of screw tightener Complete in all respects as per the directions of the Engineer-in-charge.YEIDA SOR-37

Supply & fixxing of stay insulator with stay wire Complete in all respects as per the directions of the Engineer-in-charge. YEIDA SOR-38

Numbering of poles with combination of yellow and black colour paint etc. Complete in all respects as per the directions of the Engineer-in-charge. at site. Analysis of Rates