PROVN OF DEFI MD ACCN FOR CIVILIAN SUBORDINATE STAFF OF MES AT SE FALLS SHILLONG UNDER GE SHILLONG

Amount

Note:- (Applicable for all parts/items/):- The bidders/contractors are advised to read tender documents, all drawings & all corrigendum/ amendments and General conditions of contracts before entering / quoting the rates.

Lumpsum price worked out by the tenderer for BUILDING & STRUCTURES WORKS as listed in Schedule ‘A’ Part-I

Lumpsum price workedout by the tenderer for SITE CLEARANCE, SITE DEVELOPMENTS & EARTH WORKS as listed in Schedule ‘A’ Part-II.

Lumpsum price workedout by the tenderer for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-III.

Lumpsum price workedout by the tenderer for INTERNAL ELECTRIFICATIONS as listed in Schedule ‘A’ Part-IV.

Lumpsum price workedout by the tenderer for ROAD, PATH, CULVERT & HARDSTANDING as listed in Schedule ‘A’ Part-V.

Lumpsum price workedout by the tenderer for SEWAGE DISPOSAL as listed in Schedule ‘A’ Part-VI.

Lumpsum price workedout by the tenderer for AREA DRAINAGE as listed in Schedule ‘A’ Part-VII.

Lumpsum price workedout by the tenderer for COMPOUND WALL, FENCING & GATE as listed in Schedule ‘A’ Part-VIII.

Lumpsum price workedout by the tenderer for EXTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-IX.

Lumpsum price workedout by the tenderer for EXTERNAL ELECTRIFICATION as listed in Schedule ‘A’ Part-X.

NOTE: Schedule 'A' Part-XI (MISC B/R, E/M SERVICES) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

M&L for Continuous edging (kerb stone) with factory made precast concrete block of standard size and section as approved by GE in plain cement concrete 1:2:4 Type B1 (using 20 mm graded stone aggregate) and laying in position to required line, level and curvature including necessary excavation, embedding the blocks in ground and tamping the ground around the blocks and removal of surplus soil if any and jointing with cement mortar 1:4 complete all as specified.

M&L for Cutting of existing GI main tubing of size 80 mm bore for taking out branch connection for PP-R pipe of size 90 mm dia including threading on both sides and inserting one number GI equal Tee of size 80 mm x 80 mm x 80 mm and connected with PP-R pipe including jointing materials and making joint leak proof as per site requirement complete all as directed.

Material & Labour for Machine pressed rubber moulded precast concrete interlocking paver block rubberized prepolished any shape and size confirming to IS 15658 of 60 mm thickness, M-35 grade with grey cement mixed with pigment complete all as specified and as directed.

Supply, laying and testing of 160 mm nominal diameter High density polyethylene pipes (HDPE) of pressure rating PN4 as per IS : 14333 : 1996 for sewage line in any length, laid in trenches complete all as specified and as directed.

S & F Blanking plate for MCB DBs of suitable size complete all as specified and as directed.

S&F Epoxy Powder Coated Distribution Board, Double Door, Vertical Type VTPN MCCB DB 4 way, including 01 No MCCB, 4 pole, 16 KA, 63 Amps as incoming with common bus bar complete with necessary internal wiring and fixed complete all as specified and as directed.

Supply and fixing exhaust fan 225 mm (min) sweep MS CRCA body and metal blades with double bearing with self closing louvers, AC single phase 230 volts, including electrical connection with twisted three core PVC insulated flexible cord of size 0.75sqmm copper conductor from ceiling rose complete all as specified and as directed. Make: Model- Ventil Air - DS of Havells or equivalent make as per Appendix 'B'.

Supply and fixing single phase electronic temper proof static energy meter class 1.0 accuracy, 240 volt system with backlit LCD display of rating 5 to 30 amps measures and including safe high grade, transparent engineering polycarbonate casing of projection mounting type hinged box, thickness of box to be 2 mm minimum complete all as specified. Make : L&T Model WM101BC7DL0BOX or equivalent model of make list as given in Appendix "B".

Supply and fixing of 5 watt B22 base LED lamp complete all as specified and directed. Make : Havells Cat Part No LHLDERUEMD8X005 or equivalent model of make as given in Appx 'B'.

Supply and fixing of Energy saving LED light fitting 1 x 18 Watt, 230 volts, with decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly & high power LED’s as light source with LED fitting system lumen efficiency 100 Lumen per watt (system efficacy) and electronic driver( >80% efficiency level & THD< 10%) , power factor shall be >0.95 complete and including all other standard accessories as per manufacture instructions ,internally pre-wired including connecting up with twin core 0.75 sq. mm copper conductor flexible wire/cable complete all as specified. Make : Havell Cat No LHEXBLP7PN1W018 or equivalent model of make list as given in Appx "B".

Supply and fixing of Energy saving environment friendly ultra modern energy saving surface mounted decorative oval bulkhead edge-lit LED luminaire 10 Watt comprising of high brightness LEDs including electronic ballast, lamp holder, etc. including all electrical accessories and connecting up with twin core 0.75 sq. mm copper conductor flexible wire/cable complete all as specified. Make : Havells Cat No. LHEOAOP7UZ6W010 or equivalent model of make list as given in Appx "B".

Supply , Fixing & testing of LED street light fitting (Building Security light) of 45 Watt, driver and made of pressure die-cast aluminium housing with epoxy powder coated dark graphite grey colour finish and prismatic polycarbonate cover with individual lenses IP 65 & high power LED’s as light source with LED fitting system lumen efficiency not less than 100 Lumen per watt and electronic driver with efficiency > 85% with inbuilt protection against lightning, over voltage, short circuit and surge/spike protection upto 5 KV ensuring longer life (THD <10%, PF shall be > 0.95, colour temperature 5700±300 K), Life expectancy of LED's minimum 50,000 burning hrs, warranty of complete luminaries fitting shall not less than two years. The fitting shall be tested LM 79 & 80 and test certificate shall be submitted from original manufacture. The light fitting shall be fixed on pole with and including 25 mm dia (or size as per manufacturers recommendation) light grade GI pipe (bend to shape or as per manufacturers recommendation ) bracket 1.5 mtr long complete with MS flat iron clamp (clamps shall be 40 x 6 mm MS flat) nuts, bolts & washers including painting the clamps with two coat of aluminium paint over a coat of red oxide primer including connection complete all as specified and directed. Make : Model No. 169799 BRTFG 45W LED I of BAJAJ or equivalent model of make list as given in Appx "B". Note :- For items No. 11.10 to 11.12 : Warranty of complete LED luminaries fitting shall not less than two years and Life expectancy of LED's minimum 50,000 burning hrs.

Supply and laying of PVC insulated and PVC sheathed multi-stranded copper conductor cable of size two core 2.50 sqmm 1100 volts grade passing through pipe from junction box to street light fitting, etc. complete all as specified and as directed.

Supply & fixing of transparent street light junction box of size 167 mm x 125 mm x 82 mm made of high quality polycarbonate IP-66/67 (Dust and power jet Proof according to IEC 60529) , shock proof, rust free, corrosion free acid and chemical resistant, fire retardant having high impact (IK 08) totally insulated (Class II ) made of halogen and silica free recyclable material, UV resistant having high grade gasket made of polyurethane with two nos of cable gland of size 10 sqmm, etc. with one no of MCB Single Pole 6 amps, 415 volt, 10 KA and fixing complete with 02 Nos, 25 x 3 mm thick MS clamps, nuts & bolt, etc. complete all as specified and directed.

Supply and laying XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy grade) 1100 volts grade with stranded copper conductor of size 3.5 core x 70 sqmm including all required cable lugs of suitable size all as specified and directed.

Supply and fixing cable jointing kit for 1.1 KV grade XLPE cable for straight through joint complete with jointing kit, heat shrinkable type suitable for 70 sqmm 3.5 core XLPE cable.

M&L for lightning arresters metal oxide type, distribution class, discharge capacity 5 KA for 11 KV system confirming to IS-3070 complete all as directed.

Point wiring with 1.5 Sq. mm (nominal area) PVC insulated and un-sheathed single core FRLSH copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC rigid concealed conduit (heavy grade) and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and un-sheathed single core FRLSH cable 1100 volts grade with multi-stranded copper conductor and connected to common earth dolly, with and including 1.6 mm thick cadmium plated sunk MS pressed steel terminal boxes with 3 mm thick plastic laminated sheet cover fixed with brass screws complete for one light / fan / bell point controlled by one, oneway switch.

All as per Sr. Item No. 11.19 here-in-above but for one light point controlled by two nos, two way switches.

All as per Sr. Item No. 11.19 here-in-above but for one 6 amps socket outlet on independent board controlled with one, oneway switch.

All as per Sr. Item No. 11.19 here-in-above but for one 6 amps socket outlet on same board with other switch.

Point wiring with 4 Sq. mm (nominal area) PVC insulated and un-sheathed single core FRLSH copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC rigid concealed conduit (heavy grade) and conduit accessories alongwith continuous earth wire 4.0 Sq mm PVC insulated and un-sheathed single core FRLSH cable 1100 volts grade with multi-stranded copper conductor and connected to common earth dolly, with and including 1.6 mm thick cadmium plated sunk MS pressed steel terminal boxes with 3 mm thick plastic laminated sheet cover fixed with brass screws complete for one socket outlet 16 Amps on independent board controlled by one 16 A oneway switch.

Supply and fix Switch piano flush type, single pole, two way, 6 Amps, 240 V (ISI marked) complete all as specified.

Supply and fix Socket outlet 5 pin 6 Amps flush type, 240 volts (ISI marked) complete all as specified.

Supply and fix MCB Single Pole and Neutral 240 volts, 6 Amps to 32 Amps, 10KA rupturing capacity, 'C' series complete all as specified.

Supply and fix MCB Single Pole 240 volts, 6Amps to 32 Amps, 10KA rupturing capacity, 'C' series complete all as specified.

Material & Labour for earthing with galvanised steel earth plate electrode of size 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts check nuts and washers of galvanised iron or steel using GI or steel wire 4 mm dia as earthing lead as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe, 15mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs etc mesh, chorcoal and common salt in alternatee layer complete all as specified and directed by Engr-in-Charge. Note :- Length of earthwire and protection pipe in above mentioned item is considered upto 7.50 m length, additional length required shall be measured and paid separately.

Material and Labour for laying liquid seal coat with 0.09 Cum of stone chipping 6.3 mm size mixed with 9.8 Kg of paving bituumen VG-10 per 10 Sqm applied and rolled to a uniform surface with 8 to 12 tonne power roller complete all as specified.

Material and labour for Construction of RCC SEPTIC TANK FOR 100 USERS CAPACITY with all fittings & fixtures complete all as specified and shown on Drawings No. CESZ/2018/STD-06, Sheet No. 1/1.

Material and labour for Construction of PCC Block Masonary SOAK WELL for 100 users capacity with all fittings and fixtures complete all as specified and as shown on Drawings No. TD/SZ/502, Sheet No.1/1.

Supply & Fix 3 layered fusion welded PP-R (polypropylene Random Co -Polymer) gate valve (brass insert as per requirement of the site with handle, screwed both ends for PP-R pipes or for unions fixed of grade SDR - 7.4 (PN-16) and size 90 mm complete all as specified and directed.

Material & Labour for Construction of PCC block masonry valve pit of size 90 cm x 90 cm x 90 cm (inner dimension) with precast cement concrete 1:3:6, type C-1 solid blocks set in CM (1:4) with PCC M-7.5 (Nominal Mix) (using 40 mm graded stone aggregate) for foundation including 15mm thick plastering in CM (1:4) inside the valve pit and on the external portion upto 150 mm below the ground level, including 3 mm thick MS cover welded around with MS flat iron of size 40x6mm with provision of hinges, handle and locking arrangement including MS angle iron frame of size 40x40x6mm fixed on top of valve pit by means of hold fast 150 mm long, embedded in PCC block 1:2:4, Type B-1 (using 20 mm graded stone aggregate) of size 230 mm x 200 mm x 100 mm including painting with two coats of anti- corrosive paint over a coat of red oxide zinc chrome primer including necessary earthwork in soft/loose soil well ramming of soil around the constructed valve pit complete all as per Drawing No. TD/EM/06, Sheet No. 1/2 & 2/2.

Material & Labour for Construction of PCC block masonry valve pit of size 60 cm x 60 cm x 60 cm (inner dimension) with precast cement concrete 1:3:6, type C-1 solid blocks set in CM (1:4) with PCC M-7.5 (Nominal Mix) (using 40 mm graded stone aggregate) for foundation including 15mm thick plastering in CM (1:4) inside the valve pit and on the external portion upto 150 mm below the ground level, including 3 mm thick MS cover welded around with MS flat iron of size 40x6mm with provision of hinges, handle and locking arrangement including MS angle iron frame of size 40x40x6mm fixed on top of valve pit by means of hold fast 150 mm long, embedded in PCC block 1:2:4, Type B-1 (using 20 mm graded stone aggregate) of size 230 mm x 200 mm x 100 mm including painting with two coats of anti- corrosive paint over a coat of red oxide zinc chrome primer including necessary earthwork in soft/loose soil well ramming of soil around the constructed valve pit complete all as per Drawing No. TD/EM/06, Sheet No. 1/2 & 2/2.

Supply, install, testing and commissioning of distribution transformer step down, copper wounded having primary side for HT three phase11KV & secondary for 433 Volt, 3 phase, 50 c/s capacity of 100 KVA with the following specification :- (i) No load voltage ratio-11/0.433 KV (ii) Nos of phase- Three (iii) Type of cooling-ONAN (iv) Frequency-50 c/s (v) Vector group-DYN 11 (vi) Two earthing terminals for body earthing and two additional for neutral brought out on a bushing. (vii) Oil level gauge indicating oil level minimum and maximum. (viii) Lifting lugs. (ix) Rating and terminal marking plates. (x) Dehydrating breathing device which would not permit ingress of moisture, rain water and insects. (xi) Drain-cum-sampling valve (3/4" nominal size thread) preferably steel with plug (xii) Thermometer pocket (for transformers of rating above 25 KVA) with dial type thermometer of 100 mm dia.

Sr Item No. 11.35 Cont/.. (xiii) Oil filling hole (1-1/4" Nominal size thread) with conservator tank with oil level indicator. (xiv) Connection- Delta/Star (xv) Temperature rise in oil-45 deg Centigrade (xvi) Temperature rise in winding- 55 deg Centigrade. (xvii) Material winding-Copper wound (xviii) High voltage/low voltage-Bushing with brass stud of suitable size. (xix) Service -OutdoorType (xx) Neutral- Internally connected with earth lead and bush. (xxi) Tapping range and Tapping methods:- As per IS 1180 -2014, Off load, +7.5% to -10% in steps 2.5 % for variation of HV (xxii) Maximum losses of transformer shall be energy efficiency level-3 as per IS-1180(Part-I):-2014 (xxiii) Other accessories as per IS 1180(Part-I):-2014 & 2026 Sr Item No.8 (Cont/..) (xxiv) The permissible temperature rise in transformer winding shall not exceed 40 deg C when measured by thermometer method. (xxv) No load current shall not exceed 2 % of full load current when transformer is energized at rated voltage and frequency. (xxvi) FITTING ACCESSORIES:-as per clause No 19.14.1.2 of SSR Part-I and as per IS Note : (i) The quoted rate of transformer is inclusive of suitable PCC plinth height 1.5 m above GL for mounting of transformer as per manufacturer's recommendation.

Material & Labour for earthing with galvanised steel earth plate electrode of size 60cm x60 cm x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts check nuts and washers of galvanised iron or steel using GI strip 32x6mm as earthing lead as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe, 40mm dia GI medium grade earth lead protection pipe, CI frame and cover, wire, copper lugs etc mesh, charcoal and common salt in alternatee layer complete all as specified and directed by Engr-in-Charge. Note :- Length of earthwire and protection pipe in above mentioned item is considered upto 7.50 m length, additional length required shall be measured and paid separately.

Expulsion fuse single pole 11000 volts above 25 Amps and upto 50 Amp (drop out fuse) with two nos insulator per pole complete all as specified and as directed.

Sub main wiring with two runs of single core FRLSH PVC insulated and unsheathed multistranded, copper conductor cable of size 6.0 Sq mm (nominal area), 1100 volts grade drawn through and including adequate size PVC concealed conduit and accessories (IS-694 marked in PVC conduit) and fittings and one run of 6.0 Sq mm single core FRLSH multistranded copper conductor cable as earth continuity conductor. NOTES :- (a) Two runs of copper conductor, one run of earth wire and one run of conduit shall be measured as one run length.

Sub main wiring with two runs of single core FRLSH PVC insulated and unsheathed multistranded, copper conductor cable of size 4.0 Sq mm (nominal area), 1100 volts grade drawn through and including adequate size PVC concealed conduit and accessories (IS-694 marked in PVC conduit) and fittings and one run of 4.0 Sq mm single core FRLSH multistranded copper conductor cable as earth continuity conductor. NOTES :- (a) Two runs of copper conductor, one run of earth wire and one run of conduit shall be measured as one run length.

S&F Brass chromium plated wash hand basin mixer for mixing hot and cold water screwed down and suitable for 20mm outer dia CPVC pipe and fixed complete all as specified and directed.

S&F Brass chromium plated sink mixer for mixing hot and cold water screwed down and suitable for 20mm outer dia CPVC pipe and fixed complete all as specified and directed.

S&F cable route indicator made out of 35 x 35 x 6 mm angle iron 150mm clear height with 100mm embedded in PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) block of size 200 x 200 x 200 mm with letter MES LT Cable/HT Cable suitably inscribed on CI circular plate 100mm dia, 5mm thick welded with angle iron including necessary earth work and two coat of synthetic enamel paint over a coat of red oxide primer on steel surface complete all as specified and directed.

S&F Brass chromium plated wall mixer non-telephonic shower arrangement with connecting legs and wall flanges complete with all accessories.

Subtotal of Schedule "A' Part-XI

M/S UTTAM SAHA

N.V.ENGINEERING

mahinder electricals

BERIWAL CONSTRUCTIONS

Agarwal and Company

Bidder Name

M/S UTTAM SAHA

Agarwal and Company

SARINS

mahinder electricals

BERIWAL CONSTRUCTIONS

N.V.ENGINEERING