Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.8 LAccepted-AOC F 402 AMBIKA APARTMENT PLOT A 9 SECTOR 20 NERUL W NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹35.7 L+₹93,413.50 (2.69%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹35.8 L+₹1.1 L (3.18%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹36.5 L+₹1.8 L (5.06%)Rejected-Finance ROOM NO A 46 GALI NO 11 GANESH MURTHY NAGAR PART NO 3 CAPT PRAKASH PETHE MARG CUFFE PARADE COLABA MUMBAI 400005 | MUMBAI | MUMBAI | MAHARASHTRA | 400005 | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹37.6 L+₹2.9 L (8.40%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
| Sl No | Description | Qty | Unit | Advait Enterprises L1 | jkconstruction L4 | m/s Pravin s Bhosale L5 | shrilaxminarayan constructions L7 | D R CONSTRUCTION L8 | Ruhi Construction L3 | SHRIYA CONSTRUCTION L6 | GULMOHAR CONSTRUCTION L2 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for preparation of old plastered or unplastered surfaces of wall incl cornices, pillasters by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of OBD complete all as specified and directed. | 13,000 | Sqm | 24 ₹3,12,000 | 25 ₹3,25,000 | 25 ₹3,25,000 | 30 ₹3,90,000 | 35 ₹4,55,000 | 25 ₹3,25,000 | 25 ₹3,25,000 | 19 ₹2,47,000 Lowest |
| 2.00 | -Ditto- all as per item No 01 above but applying in two coats of OBD complete all as specified and directed. | 3,500 | Sqm | 35 ₹1,22,500 | 37 ₹1,29,500 | 30 ₹1,05,000 Lowest | 50 ₹1,75,000 | 40 ₹1,40,000 | 36 ₹1,26,000 | 45 ₹1,57,500 | 31 ₹1,08,500 |
| 3.00 | -Ditto- all as per item No 01, here in before but one coat of OBD on ceiling surfaces complete all as specified and directed. | 2,000 | Sqm | 24 ₹48,000 | 25 ₹50,000 | 20 ₹40,000 Lowest | 40 ₹80,000 | 35 ₹70,000 | 25 ₹50,000 | 23 ₹46,000 | 20 ₹40,000 Lowest |
| 4.00 | M&L for complete removal of existing treatment on walls, preparation of surfaces and make surface free from loose particles, oil stains etc and surface ideally prewetted and applying white cementitious wall care putty average thickness 1.5mm complete all as specified and as directed by Engr-in-charge. | 3,500 | Sqm | 10 ₹35,000 Lowest | 11 ₹38,500 | 25 ₹87,500 | 55 ₹1,92,500 | 55 ₹1,92,500 | 10 ₹35,000 Lowest | 70 ₹2,45,000 | 48 ₹1,68,000 |
| 5.00 | M&L for preparation of old steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enemel paint complete all as specified and as directed by Engr-in-Charge | 1,500 | Sqm | 30 ₹45,000 | 32 ₹48,000 | 20 ₹30,000 Lowest | 40 ₹60,000 | 40 ₹60,000 | 31 ₹46,500 | 50 ₹75,000 | 25 ₹37,500 |
| 6.00 | M&L for preparation of old wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enemel paint complete all as specified and as directed by Engr-in-Charge | 2,500 | Sqm | 28 ₹70,000 | 29 ₹72,500 | 20 ₹50,000 Lowest | 23 ₹57,500 | 40 ₹1,00,000 | 29 ₹72,500 | 65 ₹1,62,500 | 25 ₹62,500 |
| 7.00 | -Ditto- all as per item No 06 above but on ceiling surfaces complete all as specified and directed. | 500 | Sqm | 35 ₹17,500 | 37 ₹18,500 | 25 ₹12,500 Lowest | 70 ₹35,000 | 55 ₹27,500 | 36 ₹18,000 | 70 ₹35,000 | 56 ₹28,000 |
| 8.00 | M&L for french polishing on old wooden surface of any description, width or girth including cleaning and preparing the surfaces with a coat of wood filler and applying one or more coats of french polish till the desired finish is obtained complete all as specified and directed by Engr-in-Charge | 200 | Sqm | 100 ₹20,000 Lowest | 105 ₹21,000 | 100 ₹20,000 Lowest | 140 ₹28,000 | 150 ₹30,000 | 103 ₹20,600 | 160 ₹32,000 | 100 ₹20,000 Lowest |
| 9.00 | M&L for prepation of old decorated plastered/unplastered surfaces of wall and applying one coat of plastic emulsion paint complete all as specified and directed. | 300 | Sqm | 50 ₹15,000 | 53 ₹15,900 | 35 ₹10,500 Lowest | 40 ₹12,000 | 120 ₹36,000 | 52 ₹15,600 | 80 ₹24,000 | 44 ₹13,200 |
| 10.00 | M&L for prepation of old plastered surface of wall and applying one coat of lustre paint complete all as specified and as directed. | 200 | Sqm | 80 ₹16,000 | 84 ₹16,800 | 50 ₹10,000 Lowest | 60 ₹12,000 | 120 ₹24,000 | 82 ₹16,400 | 90 ₹18,000 | 55 ₹11,000 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
9 Sept 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH PUNE
Garrison Engineers Office (North) General Cariappa Marg, Pune-01
GE (N) P/TOKEN- 40 OF 2025-2026 CERTAIN B/R MAINT WORK AND ALLIED SERVICES AT KOLHAPUR MIL STN IN THE AREA OF AGE B/R(EAST) UNDER GE(N) PUNE.
2025_MES_725682_1
GE (N) P/TOKEN- 40 OF 2025-2026
Open Tender
Civil Works
Item Rate
300 days
GE NORTH PUNE
Refer tender documents.
8 documents required · 8 mandatory
₹500
GE NORTH PUNE
₹98,000
Yes
17 Oct 2025
12 Aug 2025
16 Sept 2025
12 Aug 2025
9 Sept 2025
26 Aug 2025
13 Aug 2025 - 19 Aug 2025
Amount
M&L for preparation of old plastered or unplastered surfaces of wall incl cornices, pillasters by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of OBD complete all as specified and directed.
-Ditto- all as per item No 01 above but applying in two coats of OBD complete all as specified and directed.
-Ditto- all as per item No 01, here in before but one coat of OBD on ceiling surfaces complete all as specified and directed.
M&L for complete removal of existing treatment on walls, preparation of surfaces and make surface free from loose particles, oil stains etc and surface ideally prewetted and applying white cementitious wall care putty average thickness 1.5mm complete all as specified and as directed by Engr-in-charge.
M&L for preparation of old steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enemel paint complete all as specified and as directed by Engr-in-Charge
M&L for preparation of old wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enemel paint complete all as specified and as directed by Engr-in-Charge
-Ditto- all as per item No 06 above but on ceiling surfaces complete all as specified and directed.
M&L for french polishing on old wooden surface of any description, width or girth including cleaning and preparing the surfaces with a coat of wood filler and applying one or more coats of french polish till the desired finish is obtained complete all as specified and directed by Engr-in-Charge
M&L for prepation of old decorated plastered/unplastered surfaces of wall and applying one coat of plastic emulsion paint complete all as specified and directed.
M&L for prepation of old plastered surface of wall and applying one coat of lustre paint complete all as specified and as directed.
M&L for preparation of old wall surface of any description, width or girth, application of resin pigment and hardener to desired colour spfd pattern and applying one coat of acrylic emulsion paint(Apex) with spray guns, compressor etc in any height of Bldg complete all as specified and directed by Engr-in-Charge
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches,pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed
M&L for pre-cast cement concrete block masonry with solid blocks exc. 10 cm in width, type C-1,1:3:6 (using 20mm graded agg) and setting in cement mortar 1:6 complete all as directed
Taking down in cement plastering on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc upto 12.0mtr height of Bldg complete all as directed.
M&L for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and fair without using extra cement upto 12.0mtr height of Bldg complete all as specified and as directed
M&L for rendering 15 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement upto 12.0mtr height of Bldg complete all as specified and as directed
M&L for preparation of new plastered wall surface of any description, width or girth, and applying two coats of cement base paint over a coat of primer upto 12.0mtr height of Bldg complete all as specified and as directed
M&L for preparation of new plastered wall surface of any description, width or girth, and applying two coats of OBD over a coat of primer upto 12.0mtr height of Bldg complete all as specified and as directed
Demolition of cement concrete(un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)
M&L for PCC type D-2,1:4:8 (using 40mm graded stone agg) as in fdns, sub base of floor, filling and mass concrete complete all as directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.09 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed
M&L coloured vitrified double charge tiles 8-10mm thick (square/rectangular) area of each tile exc 0.18sqm but not exc 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed
M&L glazed ceramic coloured tiles of size 450 x 300 x 7-8mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed
M&L Granite (of any type), 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform,WHB platform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges complete. complete all as specified and as directed
M&L for machine cut 20-25mm thick polished cudappah stone slab as in shelves, partitions, cooking platform below granite stone and like including necessary jointing and pointing and making good to disturbed surface complete all as specified and directed
M&L for coloured, textured design heavy duty exterior tiles of size 300mm x 300mm x10 mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and shade/ pattern as approved by GE over and including 15mm thick screed bed in CM (1:4) and demolition of existing tiles of any description complete all as specified and as directed. Make: Johnsun Endura textured design or equivalent of Kajaria/ Somani as approved by GE.
M&L for designer coloured glossy rubber moulded chequered cement concrete tiles of size 30cmx30cmx25 to 27mm thick in floor, set, jointed and pointed in neat cement slurry with grey cement and pigment over and including 20mm thick screed bed in CM (1:6) including dismantling of existing tiles of any description laid in cement mortar complete all as specified and as directed.
M&L for machine pressed precast cement concrete coloured interlocking paver blocks, glossy rubber moulded, of triangular / Zigzag / Haxagone/any shape/design and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 with grey cement and pigments grade in floor/ paths/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile including filling the joints with sand including dismantling of existing tiles of any description complete all as specified and as directed. NOTE: (i) Manufacturers test certificate shall be submitted alongwith sample.
Dismantling existing interlocking paver blocks, removing rubbish off the premises and laying the same tiles/ blocks on existing places with repair of existing PCC for 60mm thick tile, in floor/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile complete all as specified and as directed.
S&F for rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made frome virgin grade of polyethy-lene material which is duly stablized with anti-oxident plastic) of capacity 500 litres, cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/ outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank all as specified and directed. Make: Sintex, Polycon, Rotex
-Ditto- all as per item No 31 here in before but 1000Ltrs capacity complete all as specified and directed.
S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing GI tubing as specified.
-Ditto- all as per Srl item No 33 here-in-before, but fixing only
S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing as specified.
All as per Srl item No 35 here-in-before, but fixing only
M&L cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc 10cm girth complete all as specified and as directed
S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe), including long Arm P-trap (CI) 100 mm dia of lenght up to 700 mm or as per site requirement ,complete incl making good to floor complete all as specified and as directed Make:Cera/Prayag/Johnson Pedder.
S&F in repairs vitreous China wash down water closet pan (pedestel pattern) ETWC white, including trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan including 450/600mm long PVC connection and plastic water closet seat of white in colour, back closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed Make : Cera/Prayag/Johnson Pedder.
S&F in repair vitreous china wash hand basin white of bowl size 550 x 440mm incl waste coupling and PVC waste pipe, 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy 15 mm bore to be fixed with and incl M S brackets complete all as specified and as directed Make : Cera/Prayag/Johnson Pedder.
S&F in repair white counter top Basin (self-rimming) Oval shape of size 550mm x 430mm x 195 mm fixed in position including waste coupling and PVC waste pipe, 32mm dia. complete Make: Perryware Model Aquarius, Cat Part No – C0466(SP) or of equivalent make as per Appx 'A' as approved by GE.
S&F in repair plastic closet seat white closed pattern with flat bottom and cover and mild asteel chromium plated hinging device for pedestal pattern WC/semi pedestal and WC (anglo indian type) complete all as specified and as directed.
S&F in repair 32mm dia PVC waste pipe for WHB, kitchen sink of length 1.0mtr incl coupling incl fixing the same complete all as specified and as directed Make;Prayag or ISI marked
S&F in repair 40mm dia PVC waste pipe for WHB, kitchen sink of length 1.0mtr incl coupling incl fixing the same complete all as specified and as directed Make;Prayag or ISI marked
S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and directed. Make : Cera/Prayag/Johnson Pedder.
S&F in repair PVC connection 15mm bore size with PTMT nuts and washers of length 450mm complete all as specified and directed. Make : Prayag/Polytuff.
S&F in repair cabinet mirror plastic body for toilet of size 350mmx450mm with 4mm thick looking mirror complete all as specified and as directedMake : Prayag/Polytuff.
S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, incl 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 914mm x 460mm, bowl size 405mm x 330mm x 160mm complete all as specified and as directed
S&F in replacement stainless steel plate rack of size 24''x30"x10" complete all as specified and directed.
S&F in replacement stainless steel plate rack of size 24''x36"x10" complete all as specified and directed.
S&F in repair of glass shelf of size 450mmx150mmx8mm thick with chomium plated railing fixed with and incl chromium plated bracket complete all as specified and as directed
S&F in repair of corner glass shelf of size 300mm dia and 8mm thick with chomium plated railing fixed with and incl chromium plated bracket complete all as specified and as directed
S&F in repairs hand shower (health faucet) of cast copper alloy chromium plated with 8mm dia, 1.2m long flexible tube and wall hook complete all as specified and directed by Engr-in-charge. Make : Cera/Prayag or of equivalent make as per Appx 'A' as approved by GE
S & F in repair brass chromium plated soap dish , fixed to wall with CP brass screws, all as specified and directed. Make: Johnson Fusion series Cat part No: T3252C or of equivalent make as per Appx 'A' as approved by GE
S & F in repair Brass Chromium plated towel rail all as specified and directed. Make: Johnson Fusion series Cat part No: T1350C or of equivalent make as per Appx 'A' as approved by GE
S&F in repair brass chromium plated towel ring all as specified and directed. Make: Johnson Fusion series Cat part No: T1351C or of equivalent make as per Appx 'A' as approved by GE
S&F in repairs bib cock long nose quarter turn suitable for 15mm bore pipe long body with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified and as directed Johnson VIVA new series Cat part No: T4806C or of equivalent make as per Appx 'A' as approved by GE
S&F in repairs bip taps standard of PTMT any colour 15mm bore min wt 90gms Make: Prayag or equvalent of ISI marked
S&F in repairs pillar taps swan neck suitable for 15mm bore pipe long body fancy type brass CP with capstan head screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified and as directed Make : Johnson Magna series Cat part No: T2804C or of equivalent make as per Appx 'A' as approved by GE.
S&F in repairs pillar taps suitable for 15mm bore pipe long body fancy type brass CP with screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified and as directed Make: Johnson VIVA new series Cat Pt No: T4801C or of equivalent make as per Appx 'A' as approved by GE.
S&F in repairs, chromium plated bib cock with wall flange quarter turn complete all as specified and as directed. Cat No. FUS-29037 of make Jaquar ‘Fusion' series or of equivalent make as per Appx 'A' as approved by GE.
S&F in repairs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Jaquar Cat Part No FUS- 29273UPR Fusion Series or of equivalent make as per Appx 'A' as approved by GE.
S&F in repair angle cock with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified and as directed Make: Johnson Eco Cat part No: T3910C or of equivalent
S&F in repairs two way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified and as directed Make Johnson VIVA new series Cat part No: T4808C or of equivalent make as per Appx 'A' as approved by GE.
S&F in repair cast copper alloy CP shower arm square 230mm long with flange complete all as specified and directed by Engr-in-charge. Make : Johnson Cat part No: S0001C1 or of equivalent make as per Appx 'A' as approved by GE.
S&F in repair brass chromium plated shower rose 115mm size square (without arm) with swivel joints including fixing arm/ pipe complete all as specified and as directed Make Johnson Cat part No: S0006C or of equivalent make as per Appx 'A' as approved by GE.
S&F in repair Toilet paper holder of stainless steel, all as specified and directed. Make: Johnson Fusion series Cat part No: T3254C or equivalent
S&F in replacement 75/100mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate complete all as specified and as directed
S&F in repair grating round 75 mm size of CP with/without hole complete all as specified and as directed
S&F in repair grating round 100mm size of CP with/without hole complete all as specified and as directed
S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and as directed
S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and as directed
S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and as directed
S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and as directed
S&F in repairs PVC (SWR) bends of any radius of 110mm bore complete all as specified and as directed
S&F in repairs PVC (SWR) bends of any radius of 75mm bore complete all as specified and as directed
S&F in repairs PVC (SWR) branch piece single (single ‘Y’) equal or unequal for 110mm bore PVC pipe complete all as specified and as directed
S&F in repair PVC(SWR) branch piece single (single ‘Y’) equal or unequal for 75mm bore PVC pipe complete all as specified and as directed
S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified and as directed
S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified and as directed
Labour only for opening of air locks in toilets /baths and kitchen water pipe line but excluding fittings complete all as specified and as directed
S&F in repair PVC lid for poly water storage tanks of capacity 500/1000 litres including PVC hinges and PVC locking both complete all as specified and as directed
Cleaning and removing all scale and dirt, etc., from tanks and mouth of circulating pipe etc. including disconnecting existing tanks, setting aside, reconnecting and refixing in position after cleaning exc. 250 & n. exc. 500 litres capacity of tank complete all as specified and as directed
Cleaning and removing all scale and dirt, etc., from tanks and mouth of circulating pipe etc. including disconnecting existing tanks, setting aside, reconnecting and refixing in position after cleaning exc. 500 & n. exc. 1000 litres capacity of tank complete all as specified and as directed
Removing of vegetation / plantation on the wall/ roof/ any position of up to double storey building including necessary scaffolding and roots, girth n. exc. 10cm each and applying chemical treatment with GLYPHOSATE 41% and making good of surface incl removing /refixing of CI/GI pipe lines complete all as specified and as directed. (Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately)
Taking down chowkats or frames not exc. 1.5 sq. m each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed
All as per srl item No. 87 above but exc. 1.5 sq.m but n exc 4 sqm each complete all as specified and directed
Taking down shutters of any description not exc. 1.5 sq. m each complete all as specified and directed
All as per srl item No. 89 above but exc. 1 sq. m but n exc 2 sqm each complete all as specified and directed
S&F in aluminium anodised powder coated ventilator using rectangular tube of size 63.50 x 25 x 1.50 mm including 3.50 mm thick designer glass louvers and stainless steel wire mesh 0.36 mm nominal dia of wire, average width of aperture 1.40 mm using ‘Jindal” aluminium section complete all as specified and directed by Engr-in-Charge.
S&F in aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.
S&F Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.
S&F factory made solid PVC molded shutter of 28 to 30 mm thick (stiles), consisting of frame made up of MS tube of size 40mm X 20mm (19 gauge) for top, bottom rail, and in stiles rail, with 2, 4, or 6 raised panel design with 5mm thick moulded prelam PVC Sheet on the front face & 5mm thick prelam PVC sheet on back face. Inside core shall be of PVC solid board of 20 mm thick. Door shall be provided with 20 mm thick PVC lipping all around the edges, fixing in frame at site complete all as specified and directed Note : All screws shall be self tapping and length of screw not less than 50 mm.
S&F for 35-40mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed.
S&F second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.
S &F in repair stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples in any height of Bldg complete all as specified & directed.
S&F in repair 3mm thick sheet glass ordinery quality and glazing with oil putty in square n exc. 0.50 Sqm in each pane including hacking out existing broken glass for timber/steel frame work in any height of Bldg complete all as specified and directed.
S&F Stainless steel butt hinges medium weight 100mm complete all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm
S&F in repair 100mm butt hinges med weight cold rolled mild steel fixed with chowkats complete all as specified and directed
S&F in repair, 150mm, Mild steel helical door spring, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.
S&F in repair 250mm long anodised aluminum sliding door bolts with hasp and staple(bolt type) and fixing clip sheet cast or extruded sections and fixing bolts and sliding bolts complete all as specified and directed.
S&F in repair 125mm long aluminum anodised barrel tower bolts of extruded section and fixed with door complete all as specifed and directed.
S&F in repair 125mm long aluminum handles, cast type anodised and fixed with door complete all as specifed and directed.
S & F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply
S & F shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply
M&L 18/19mm thick particle board for insulation purposes fixed with nails to timber framed work incl taking down with existing one complete all as directed
S & F continuous(piano) hinges, stainless steel, width of flaps (when open) in 20mm, 0.8mm thickness complete all as specified & as directed.
M&L for making hole and fixing the metalic packer for hydrophobic PU foam and sealer without disturbing existing structure as per manufacturer's instructions and forming agent like coreseal 357A/ core seal 357 CAT for carrying out non destructive water proofing treatment of sunken portion slab, floors and walls of bathroom, WC WHB and floor traps (combined unit) by using construction chemical methods such as hydrophobic PU grouting, epoxy coatings etc. including cleaning of surfaces with wire brush, detecting the sources of leakage and reparing, removing/ taking down unsound treatment/ surfaces and followed by material and labour for second course injection of resin like coreseal 135A/ 135B without disturbing existing structure complete all as per manufacturer's instructions and as directed by Engr-in-Charge. Make:Buildcore chemicals/ Pidilite/ Chemistic/ Fosrock as approved.
M&L for cleaning carefully the existing ceramic tiles with tile cleaner with jet, washing with jet water, scratching and cleaning the joint and filling the same with epoxy tile grout of white/ matching colour, curing complete all as specified and as directed. Make: STP, Asian paint, Berger paint, Pidilite, Fosrock
M&L for welding in repairs exc 2.5cm but n.exc 5.0cm in length and thickness of metal to be welded n.exc 6mm complete all as specified and directed.
M&L for welding in repairs exc 2.5cm but n.exc 5.0cm in length and thickness of metal to be welded exc 6mm but n.exc 9mm complete all as specified and directed.
M&L for fixing of snake guard/door seal made aluminum colour coated 40mm wide with nails to cover the gaps between door and floor and similar places complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness,including nainital or similar pattern roof coverings
S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.
-Ditto- all as per item No 120 here in before but plain sheets on riges,valley gutters and similar works etc complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410-W(Gde-E- 250) quality-A complete all as specified and directed.
S&F for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 as in batterns for roofs, post, purlin, rafter etc complete all as specified and as directed.
M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer all as specified and as directed.
Complete removal of existing water proofing treatment of any thickness and cement mortar screed in existing roof including scrapping out old treatment/ bitumen etc. The roof surface shall be thoroughly wire brushed, cleaned to eliminate all sharp projections, washed, dried up and cleaned of all foreign material and dust to receive new water proofing treatment and removal of rubbish off the premises to a distance exc. 500m and not exc 1.5 Km complete all as directed.
Demolition of cement concrete of any description and in any position not therwise specifically provided for complete all as directed.
M&L for PCC (1:2:4) type B-0 (using 12.5mm graded broken stone aggregate) averaging 50mm thick as in leveling course on roof slab including finishing the surface of concrete even and fair to receive screed complete all as specified and as directed.
M&L for water proofing treatment to RCC roof slab complete all as specified below and as directed by Engineer-in-Charge including testing :-(a) 10mm thick rendering in cement mortar (1:3) mixed with and including integral water proofing compound @ 3% by weight of cement on roof slab finished even and fair complete (b) On the dried plastered surface, one coat of approved bituminous primer @ 0.70Kg/Sqm shall be applied. (c) On this primered surface, APP modified bituminous memberance 3mm thick with non woven polyster mat as reinforcement weighing not less than 3.60 Kg/Sqm with plain finish shall be laid by torch application method (d) Apply two coat of bituminous aluminium paint @ 0.15 Kg/Sqm. (e) The overlap while torching shall be 100mm at the longitudinal edges and 150mm at the ends. (f) The treatment shall be carried as per manufacturer instructions through authorised applicator. Note: Temporary arrangement has to be made for supply of water during roof treatment work.
Dismantling water tanks exc. 500 litres of capacity and not exc.1000 litres capacity and removing to store complete all as specified and directed.
Dismantling water tanks exc. 250 litres of capacity and not exc.500 litres capacity and removing to store complete all as specified and directed.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale, dirt etc from tanks, mouths of circulating pipes for capacity of tank exc.500 litres and n.exc. 1000 litres complete all as directed
All as per serial item No.132 here-in-before but for tank capacity exc.250 litres and n.exc. 500 litres
Dismantling single layer Mangalore pattern tiles or similar tiles in roofing including necessary fillets and similar items and taking out from the site without disturbing existing false ceiling complete all as specified and directed.
M&L for roof tiles Mangalore pattern interlocking at side joints, laid dry class A-A complete all as specified and as directed.
Fixing only roof tiles Mangalore pattern interlocking at side joints, laid dry complete all as specified and as directed. (Note : Serviceable tiles obtained from dismantled shall be re-used.)
M&L for ridge or hip tiles to suit Manglore pattern of roofing tiles,bedded and jointed in cement mortar (1:6) etc complete all as specified and as directed.
Fixing only for ridge or hip tiles to suit Manglore pattern of roofing tiles,bedded and jointed in cement mortar (1:6) etc complete all as specified and as directed.
Dismantling battens of tiles of any size and description spaced exc. 15cm including tilting fillets complete all as specified and directed.
S&F for 2nd class hardwood clean sawn tile battens, cross sectional area exc 5 and n.exc 15 Sqcm spaced at 30 cm centres to centres fixed with nails incl two coats of creosite oil complete all as specified and as directed. (NOTE : Measurements shall be taken overall including both battens and spaces. Deductions shall be made only for openings exceeding 0.4 sqm each).
All as per serial item No.140 here-in-before but except battens complete all as specified and as directed. (Note : Serviceable materials obtained from dismantled shall be re-used.)
Dismantling timber in scantling, fillets, rails, posts, rafters, purlins etc over 40 Sqcm in section in unframed work in any position complete all as specified and directed.
M&L for 2nd class hard wood, clean sawn, in scantling timber unframed work incl two coats of creosite oil complete all as specified and as directed.
Dismantling of eaves/ boarding any description and in any position fixed with nails complete all as specified and directed.
M&L for Eaves/ weather boarding with 10mm thick fibre cement board (non asbestos) and fixed with self drilling and tapping screws of CSK head and joints finished with jointing compound and fiber tape as per manufacturer's recommendation complete of approved arch pattern any size and shape including two coat of synthetic enamal paint over one coat of suitable primer complete all as specified and as directed. Make: V-Board (Visaka Industries Ltd)/ Everest/ Charminar/ Ramco
Dismantling asbestos cement (plain, corrugated, semi corrugated etc.) sheets in roof coverings complete all as specified and directed.
M&L for 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof, fixed with L-type or J-type or cranked hook bolts etc. complete all as specified and as directed.
All as per serial item No 147 here-in-before but except sheet complete all as specified and as directed. (Note : Serviceable materials obtained from dismantled shall be re-used.)
M&L for 6mm thick asbestos cement, two piece adjustable plain serrated ridge for corrugated or semi corrugated sheets fixed with L-type or J-type or cranked hook bolts etc. complete all as specified and directed.
All as per serial item No.149 here-in-before but except sheet complete all as specified and as directed. (Note : Serviceable materials obtained from dismantled shall be re-used.)
M&L for PCC (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in coping on top of wall, bed blocks, lintel band upto 1.5 m. span and the like including weathering, slightly rounded or chamfered angles and throating including use of necessary form work complete all as specified and directed.
Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.
GULMOHAR CONSTRUCTION (BID ID -3411124)
Ruhi Construction (BID ID -3414233)
jkconstruction (BID ID -3414390)
m/s Pravin s Bhosale (BID ID -3419889)
SHRIYA CONSTRUCTION (BID ID -3410223)
shrilaxminarayan constructions (BID ID -3420397)
D R CONSTRUCTION (BID ID -3420437)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .